HJHitesh Jariwala

Hitesh Jariwala

*This is an algorithmically generated author record based on publicly available information.

Hitesh Jariwala has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Mathematical analysis to predict tensile strength of banana/glass hybrid polymer composite

    by Hitesh Jariwala, Piyush Jain

    This article presents a mathematical model to predict the tensile strength of banana/glass hybrid polymer composites. Equivalent fiber surface efficiency factor and fiber waviness factor have been introduced in the proposed model and their effects on tensile strength have been discussed. The hybrid composites were fabricated with the different proportions of volume fraction of each of the glass fibers and banana fibers keeping the total volume fraction (VF) of combined fibers from 20% to 50%. The tensile test of hybrid composites was carried out as per ASTM D3039. The proposed model has been tested versus experimental results as well as the literature results, which shows quite good approximation of tensile strength. The proposed model is generalized and can be applied to any hybrid reinforced composites with the combination of low‐elongated and high‐elongated fibers with varying fiber loading.


  • Experimental and statistical analysis of strength of glass fiber reinforced polymer composite for different fiber architecture

    by Hitesh Jariwala, Piyush Jain, Vatsal Maisuriya

    In the present study, the effect of fiber architecture on mechanical properties of E‐glass fiber reinforced polymer composite has been investigated experimentally. The influence of fiber volume fraction on strength of composite has also been predicted using second order polynomial regression models. The glass fibers were arranged in different architecture like unidirectional continuous, unidirectional discontinuous, short randomly oriented, transversely aligned, and woven for preparation of composites. The tensile and flexural tests were performed as per ASTM D3039 and ASTM D790, respectively. The experimental results of tensile and flexural properties of composites have been discussed. Results predicted by the regression models are in good agreement with experimental results which indicate the goodness of fit and the models are statistically significant.


  • Top Cited Papers

    A review on mechanical behavior of natural fiber reinforced polymer composites and its applications

    by Hitesh Jariwala, Piyush Jain

    In the last decade, natural plant fibers (jute, sisal, coir, banana, hemp, kenaf, flax, etc.) are getting attention from many researchers and academicians to utilize it as an alternate reinforcement of synthetic fiber reinforced polymer composites. These fibers are becoming a great replacement of conventional fibers (such as glass, carbon, and aramid) due to their light weight, low cost, carbon neutrality, fairly good mechanical properties, high specific strength, and biodegradability characteristics. Some chemical treatments are required to enhance the fiber matrix interfacial strength and to minimize the moisture absorption by these fibers which would ultimately improve physico-mechanical properties of these fiber reinforced composites. This paper is a review on mechanical properties of the natural plant fiber reinforced polymer composites and various factors affecting the mechanical performance of it. The tribological behavior of natural fiber reinforced polymer composites and scanning electron microscope analysis are also discussed. Some mathematical models are mentioned which are useful to predict mechanical behavior of the composites. It is found that Halpin–Tsai equation is the most effective equation amongst others in predicting Young’s modulus for short-fiber reinforced composites with minimum error. The applications of natural plant fiber reinforced polymer composites in various engineering fields are discussed.