Salvatore D'ADdio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Salvatore D'ADdio has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Adriano Camps
CommSensLab-UPC, Departament Teoria del Senyal i Comunicacions, Universitat Politècnica de Catalunya, 08034 Barcelona, Spain
2 shared publications - Hyuk Park
CommSensLab—UPC, Department of Signal Theory and Communications, Universitat Politècnica de Catalunya—BarcelonaTech, 08034 Barcelona, Spain
2 shared publications - Jorge Bandeiras
DEIMOS Engenharia SA, Av. Dom João II 2, 1998-023 Lisboa, Portugal
2 shared publications - Jose Barbosa
DEIMOS Engenharia SA, Av. Dom João II 2, 1998-023 Lisboa, Portugal
2 shared publications - Ana Friaças
Deimos Engenharia, Av. Columbano Bordalo Pinheiro 75, 9 A1, 1070-061 Lisboa, Portugal
1 shared publication - Ana Sousa
DEIMOS Engenharia SA, Av. Dom João II 2, 1998-023 Lisboa, Portugal
1 shared publication
Latest Publications
- 3 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 12 (6) , 1658-1669
Real-Time RFI Processor for Future Spaceborne Microwave Radiometers
Anthropogenic radio frequency interference (RFI) within microwave radiometer bands is a serious problem in remote sensing. The problem is ever-increasing and thus, future spaceborne microwave radiometers will require efficient methods to mitigate the effects of RFI. In this paper, we present a solution: an RFI processor to detect and blank the RFI in real time. The processor was designed to be compatible with the 18.7-GHz channel of the Microwave Imager Instrument onboard the European MetOp Second Generation satellite system. The RFI processor developed here applies the following complementary detection algorithms: 1) anomalous amplitude detection; 2) kurtosis; and 3) two different cross-frequency algorithms. In the processing, the data are divided into subsamples with fine temporal and frequency resolution. The RFI processor detects and filters out RFI with this fine resolution in real time and then integrates the clean (noncontaminated) subsamples over time and frequency. Thus, a cleaned version of the radiometer data can be downlinked at a traditional low data rate. The processing is implemented in a reprogrammable field programmable gate array with high processing capacity, which provides high flexibility. The processing bandwidth that is applied is 200 MHz (+ 25-MHz transition bands on both sides). The detection limits of the system vary between various kinds of RFI but are in line with simulations. The power consumption of the RFI processor is ∼12 W (at room temperature), and its mass is ∼1.1 kg.
- 3 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 12 (6) , 1658-1669
Real-Time RFI Processor for Future Spaceborne Microwave Radiometers
Anthropogenic radio frequency interference (RFI) within microwave radiometer bands is a serious problem in remote sensing. The problem is ever-increasing and thus, future spaceborne microwave radiometers will require efficient methods to mitigate the effects of RFI. In this paper, we present a solution: an RFI processor to detect and blank the RFI in real time. The processor was designed to be compatible with the 18.7-GHz channel of the Microwave Imager Instrument onboard the European MetOp Second Generation satellite system. The RFI processor developed here applies the following complementary detection algorithms: 1) anomalous amplitude detection; 2) kurtosis; and 3) two different cross-frequency algorithms. In the processing, the data are divided into subsamples with fine temporal and frequency resolution. The RFI processor detects and filters out RFI with this fine resolution in real time and then integrates the clean (noncontaminated) subsamples over time and frequency. Thus, a cleaned version of the radiometer data can be downlinked at a traditional low data rate. The processing is implemented in a reprogrammable field programmable gate array with high processing capacity, which provides high flexibility. The processing bandwidth that is applied is 200 MHz (+ 25-MHz transition bands on both sides). The detection limits of the system vary between various kinds of RFI but are in line with simulations. The power consumption of the RFI processor is ∼12 W (at room temperature), and its mass is ∼1.1 kg.
- Open Access
- 12 May 2016
- Published by MDPI AG in Journal of Imaging
- Vol. 2 (2)
Microwave Imaging Radiometers by Aperture Synthesis Performance Simulator (Part 2): Instrument Modeling, Calibration, and Image Reconstruction Algorithms
The Synthetic Aperture Interferometric Radiometer Performance Simulator (SAIRPS) has been a three-year project sponsored by the European Space Agency (ESA) to develop a completely generic end-to-end performance simulator of arbitrary synthetic aperture interferometric radiometers. In a companion manuscript (Part I), the Radiative Transfer Module used to generate synthetic fully polarimetric brightness temperatures from 1 to 100 GHz, including land and ocean covers, as well as the atmosphere, is described in detail. In this manuscript (Part II), the instrument model, the calibration procedure, and the imaging algorithms are described. The instrument model includes the simulation of the array topology in terms of the number of antenna elements, the time-dependent position and orientation, and the arbitrary receivers’ topology which can be modified from a very generic one by connecting and disconnecting subsystems. All the parameters can be, one by one, defined either by mathematical functions or by input data files, including the frequency and temperature dependence. Generic calibration algorithms including an external point source, the flat target transformation, and the two-level correlated noise injection are described. Finally, different image reconstruction algorithms suitable for arbitrary array topologies have also been implemented and tested. Simulation results have been validated and selected results are presented.
- 12 May 2016
- Published by MDPI AG in Journal of Imaging
- Vol. 2 (2)
Open AccessMicrowave Imaging Radiometers by Aperture Synthesis Performance Simulator (Part 2): Instrument Modeling, Calibration, and Image Reconstruction Algorithms
The Synthetic Aperture Interferometric Radiometer Performance Simulator (SAIRPS) has been a three-year project sponsored by the European Space Agency (ESA) to develop a completely generic end-to-end performance simulator of arbitrary synthetic aperture interferometric radiometers. In a companion manuscript (Part I), the Radiative Transfer Module used to generate synthetic fully polarimetric brightness temperatures from 1 to 100 GHz, including land and ocean covers, as well as the atmosphere, is described in detail. In this manuscript (Part II), the instrument model, the calibration procedure, and the imaging algorithms are described. The instrument model includes the simulation of the array topology in terms of the number of antenna elements, the time-dependent position and orientation, and the arbitrary receivers’ topology which can be modified from a very generic one by connecting and disconnecting subsystems. All the parameters can be, one by one, defined either by mathematical functions or by input data files, including the frequency and temperature dependence. Generic calibration algorithms including an external point source, the flat target transformation, and the two-level correlated noise injection are described. Finally, different image reconstruction algorithms suitable for arbitrary array topologies have also been implemented and tested. Simulation results have been validated and selected results are presented.
- Open Access
- 11 May 2016
- Published by MDPI AG in Journal of Imaging
- Vol. 2 (2) , 17
Microwave Imaging Radiometers by Aperture Synthesis—Performance Simulator (Part 1): Radiative Transfer Module
The Synthetic Aperture Interferometric Radiometer Performance Simulator (SAIRPS) is a three-year project sponsored by the European Space Agency (ESA) to develop a completely generic end-to-end performance simulator of arbitrary synthetic aperture interferometric radiometers. This means, on one side, a generic radiative transfer module from 1 to 100 GHz, including land and ocean covers, as well as a fully 3D atmosphere and Faraday ionospheric rotation based on variable TEC. On the other hand, the instrument can have an arbitrary array topology (number of antenna elements, and their time-dependent position and orientation). Receivers’ topology can also be modified, starting from a very generic one to connecting and disconnecting subsystems, whose parameters can be individually configured. These parameters can be defined either by mathematical functions or by input data files, including the frequency and temperature dependence. Generic calibration and image reconstruction algorithms that are suitable for arbitrary array topologies have also been implemented, as well as tools to compute the instrument performance metrics, i.e., radiometric accuracy, sensitivity, angular resolution, etc. This manuscript presents the generic architecture of the SAIRPS, the algorithms implemented in the Radiative Transfer Module, and simulation results showing its performance. A companion manuscript (Part II) describes the instrument and calibration modelling, the image reconstruction algorithms, and the validation tests that were performed.
- 11 May 2016
- Published by MDPI AG in Journal of Imaging
- Vol. 2 (2) , 17
Open AccessMicrowave Imaging Radiometers by Aperture Synthesis—Performance Simulator (Part 1): Radiative Transfer Module
The Synthetic Aperture Interferometric Radiometer Performance Simulator (SAIRPS) is a three-year project sponsored by the European Space Agency (ESA) to develop a completely generic end-to-end performance simulator of arbitrary synthetic aperture interferometric radiometers. This means, on one side, a generic radiative transfer module from 1 to 100 GHz, including land and ocean covers, as well as a fully 3D atmosphere and Faraday ionospheric rotation based on variable TEC. On the other hand, the instrument can have an arbitrary array topology (number of antenna elements, and their time-dependent position and orientation). Receivers’ topology can also be modified, starting from a very generic one to connecting and disconnecting subsystems, whose parameters can be individually configured. These parameters can be defined either by mathematical functions or by input data files, including the frequency and temperature dependence. Generic calibration and image reconstruction algorithms that are suitable for arbitrary array topologies have also been implemented, as well as tools to compute the instrument performance metrics, i.e., radiometric accuracy, sensitivity, angular resolution, etc. This manuscript presents the generic architecture of the SAIRPS, the algorithms implemented in the Radiative Transfer Module, and simulation results showing its performance. A companion manuscript (Part II) describes the instrument and calibration modelling, the image reconstruction algorithms, and the validation tests that were performed.