Salvatore Sanzaro
Research Subjects
Research Interests
Salvatore Sanzaro has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Alessandra Alberti
CNR-IMM
8 shared publications - Antonino La Magna
Istituto per la Microelettronica e Microsistemi, National Research Council of Italy, 95121 Catania, Italy
8 shared publications - Ioannis Deretzis
Consiglio Nazionale delle Ricerche Istituto per la Microelettronica e Microsistemi (CNR‐IMM) Z.I. VIII Strada 5 Catania 95121 Italy
5 shared publications - Corrado Bongiorno
CNR-IMM
4 shared publications - Emanuele Smecca
CNR-IMM, Zona Industriale Strada VIII n.5, 95121 Catania, Italy
4 shared publications - Giovanni Mannino
CNR-IMM, Zona Industriale Strada VIII n.5, 95121 Catania, Italy
4 shared publications
Latest Publications
- Open Access
- 20 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1192, 81-87
Ni Si Alloy/4H-SiC Reaction and Silicide Formation under Excimer Laser Annealing for Ohmic Contact
Laser annealing is considered an enabling process for a new generation of SiC power devices, since it allows the formation of ohmic contacts on very thin wafers, significantly reducing their total ON resistance. Ni silicide and Ti silicide ohmic contacts have been widely investigated and reported in literature, exploring in detail the role of laser features, metal thickness and thinning process. Nevertheless, adding a small amount of Si to the contact layer could represent an opportunity to increase process options. In this work, a NiSi alloy has been used as a contact metal to study the role of the addition of Si to Ni in the reaction process under UV laser irradiation. Morphological and structural properties of the reacted layers have been investigated by means of Transmission Electron Microscopy (TEM) and X-Ray Diffraction (XRD) analyses. The electrical characterization of reacted contacts has been performed by measuring their Sheet Resistance (R s ) by Four Point Probe (FPP) method and, at device level, by measuring the forward voltage drop (V f ) of Schottky Barrier Diodes (SBDs) fabricated on 150 mm-diameter 4H-SiC wafers. Furthermore, a comparison has been made between Ni and NiSi alloy under the same irradiation conditions. It has been found that adding Si to Ni in the contact metal layer moves the silicide reaction forward, driving the strong relationship observed between structural, morphological and electrical properties of the reacted contacts.
- 20 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1192, 81-87
Open AccessNi Si Alloy/4H-SiC Reaction and Silicide Formation under Excimer Laser Annealing for Ohmic Contact
Laser annealing is considered an enabling process for a new generation of SiC power devices, since it allows the formation of ohmic contacts on very thin wafers, significantly reducing their total ON resistance. Ni silicide and Ti silicide ohmic contacts have been widely investigated and reported in literature, exploring in detail the role of laser features, metal thickness and thinning process. Nevertheless, adding a small amount of Si to the contact layer could represent an opportunity to increase process options. In this work, a NiSi alloy has been used as a contact metal to study the role of the addition of Si to Ni in the reaction process under UV laser irradiation. Morphological and structural properties of the reacted layers have been investigated by means of Transmission Electron Microscopy (TEM) and X-Ray Diffraction (XRD) analyses. The electrical characterization of reacted contacts has been performed by measuring their Sheet Resistance (R s ) by Four Point Probe (FPP) method and, at device level, by measuring the forward voltage drop (V f ) of Schottky Barrier Diodes (SBDs) fabricated on 150 mm-diameter 4H-SiC wafers. Furthermore, a comparison has been made between Ni and NiSi alloy under the same irradiation conditions. It has been found that adding Si to Ni in the contact metal layer moves the silicide reaction forward, driving the strong relationship observed between structural, morphological and electrical properties of the reacted contacts.
- Open Access
Mechanism of Grain Densification in Nano- and Poly-Crystalline Cu Films and Its Impact in Advanced Metallization Processes
We investigate the microstructural evolution of electrochemically deposited poly-crystalline Cu films during subsequent thermal process cycles at mild maximum temperatures, compatible with the integration in advanced metallization schemes for electronic device manufacturing. The modifications induced by the thermal budget have been characterized at different scales (from the film-substrate interface to the wafer scale) with different complementary techniques: X-ray Diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and dynamical warpage measurements. Moreover, the film internal grains’ evolution has been modelled by a tri-dimensional on-cell model, derived by the Pott-like multi-states configurational energy dependence, able to consider multiple orientation of the grains and densification kinetics in the canonical ensemble. Finally, a macroscopic model of the warpage dependence on the process conditions is discussed. The presented joint theoretical and experimental analysis provides a complete and consistent scenario of the grain densification phenomenon and its impact for the Cu film microstructure and the composite system morphology, indicating several strategies for the integration of the process in real device structures.
Open AccessMechanism of Grain Densification in Nano- and Poly-Crystalline Cu Films and Its Impact in Advanced Metallization Processes
We investigate the microstructural evolution of electrochemically deposited poly-crystalline Cu films during subsequent thermal process cycles at mild maximum temperatures, compatible with the integration in advanced metallization schemes for electronic device manufacturing. The modifications induced by the thermal budget have been characterized at different scales (from the film-substrate interface to the wafer scale) with different complementary techniques: X-ray Diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and dynamical warpage measurements. Moreover, the film internal grains’ evolution has been modelled by a tri-dimensional on-cell model, derived by the Pott-like multi-states configurational energy dependence, able to consider multiple orientation of the grains and densification kinetics in the canonical ensemble. Finally, a macroscopic model of the warpage dependence on the process conditions is discussed. The presented joint theoretical and experimental analysis provides a complete and consistent scenario of the grain densification phenomenon and its impact for the Cu film microstructure and the composite system morphology, indicating several strategies for the integration of the process in real device structures.
- Open Access
Black‐Yellow Bandgap Trade‐Off During Thermal Stability Tests in Low‐Temperature Eu‐Doped CsPbI3
The black γ‐phase of CsPbI3 with its bandgap at ≈1.75 eV can enable the take‐off of tandem solar cells as soon as intrinsic instability to the yellow δ‐phase is solved. Here, a black γ‐phase is formed at low temperature (80–90 °C) by incorporating Eu through EuCl3 or EuI2. It is forced to become yellow by thermal heating under nitrogen. It is demonstrated how spectroscopic ellipsometry and the related critical points analysis provide a new diagnostic tool to monitor the transformation through the bandgap footprint. As two sides of the same coin, the consumption of the black γ‐phase and the growth of the yellow δ‐phase are addressed and modeled in the range of 60–100 °C using the Avrami's theory. This approach allows extracting the activation energies of the phase transformation that are 0.95 eV versus 1.15 eV using EuI2 and EuCl3, respectively. In situ transmission electron microscopy analyses combined with fast marching simulations highlight that the phase transformation occurs through constant nucleation and growth. Europium has indeed the capability to tackle those processes and to extend the durability of the black γ‐phase at 30 °C in N2 to ≈250 days, hugely above the one observed without Eu (≈hours).
Open AccessBlack‐Yellow Bandgap Trade‐Off During Thermal Stability Tests in Low‐Temperature Eu‐Doped CsPbI3
The black γ‐phase of CsPbI3 with its bandgap at ≈1.75 eV can enable the take‐off of tandem solar cells as soon as intrinsic instability to the yellow δ‐phase is solved. Here, a black γ‐phase is formed at low temperature (80–90 °C) by incorporating Eu through EuCl3 or EuI2. It is forced to become yellow by thermal heating under nitrogen. It is demonstrated how spectroscopic ellipsometry and the related critical points analysis provide a new diagnostic tool to monitor the transformation through the bandgap footprint. As two sides of the same coin, the consumption of the black γ‐phase and the growth of the yellow δ‐phase are addressed and modeled in the range of 60–100 °C using the Avrami's theory. This approach allows extracting the activation energies of the phase transformation that are 0.95 eV versus 1.15 eV using EuI2 and EuCl3, respectively. In situ transmission electron microscopy analyses combined with fast marching simulations highlight that the phase transformation occurs through constant nucleation and growth. Europium has indeed the capability to tackle those processes and to extend the durability of the black γ‐phase at 30 °C in N2 to ≈250 days, hugely above the one observed without Eu (≈hours).
- Open Access
Simulations of the Ultra-Fast Kinetics in Ni-Si-C Ternary Systems under Laser Irradiation
We present a method for the simulation of the kinetic evolution in the sub µs timescale for composite materials containing regions occupied by alloys, compounds, and mixtures belonging to the Ni-Si-C ternary system. Pulsed laser irradiation (pulses of the order of 100 ns) promotes this evolution. The simulation approach is formulated in the framework of the phase-field theory and it consists of a system of coupled non-linear partial differential equations (PDEs), which considers as variables the following fields: the laser electro-magnetic field, the temperature, the phase-field and the material (Ni, Si, C, C clusters and Ni-silicides) densities. The model integrates a large set of materials and reaction parameters which could also self-consistently depend on the model variables. A parameter calibration is also proposed, specifically suited for the wavelength of a widely used class of excimer lasers (λ = 308 nm). The model is implemented on a proprietary laser annealing technology computer-aided design (TCAD) tool based on the finite element method (FEM). This integration allows, in principle, numerical solutions in systems of any dimension. Here we discuss the complex simulation trend in the one-dimensional case, considering as a starting state, thin films on 4H-SiC substrates, i.e., a configuration reproducing a technologically relevant case study. Simulations as a function of the laser energy density show an articulated scenario, also induced by the variables’ dependency of the materials’ parameters, for the non-melting, partial-melting and full-melting process conditions. The simulation results are validated by post-process experimental analyses of the microstructure and composition of the irradiated samples.
Open AccessSimulations of the Ultra-Fast Kinetics in Ni-Si-C Ternary Systems under Laser Irradiation
We present a method for the simulation of the kinetic evolution in the sub µs timescale for composite materials containing regions occupied by alloys, compounds, and mixtures belonging to the Ni-Si-C ternary system. Pulsed laser irradiation (pulses of the order of 100 ns) promotes this evolution. The simulation approach is formulated in the framework of the phase-field theory and it consists of a system of coupled non-linear partial differential equations (PDEs), which considers as variables the following fields: the laser electro-magnetic field, the temperature, the phase-field and the material (Ni, Si, C, C clusters and Ni-silicides) densities. The model integrates a large set of materials and reaction parameters which could also self-consistently depend on the model variables. A parameter calibration is also proposed, specifically suited for the wavelength of a widely used class of excimer lasers (λ = 308 nm). The model is implemented on a proprietary laser annealing technology computer-aided design (TCAD) tool based on the finite element method (FEM). This integration allows, in principle, numerical solutions in systems of any dimension. Here we discuss the complex simulation trend in the one-dimensional case, considering as a starting state, thin films on 4H-SiC substrates, i.e., a configuration reproducing a technologically relevant case study. Simulations as a function of the laser energy density show an articulated scenario, also induced by the variables’ dependency of the materials’ parameters, for the non-melting, partial-melting and full-melting process conditions. The simulation results are validated by post-process experimental analyses of the microstructure and composition of the irradiated samples.
- Open Access
- 24 July 2021
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2021 (36) , 3776-3780
A One‐Pot Synthesis of “K(hfa) glyme” Adducts: Effect of the Polyether Length on the Ion Coordination Sphere
Potassium complexes are starting to gather more and more interest from academia and industry because of their intriguing application possibilities. Novel adducts of potassium hexafluoroacetylacetonato [K(hfa)] with polyethers (monoglyme, diglyme, triglyme, and tetraglyme) were synthesized through a single step reaction and characterized through FT‐IR spectroscopy as well as 1H and 13C NMR spectroscopy. Single crystal X‐ray diffraction studies enabled the identification of fascinating K coordination polymeric networks.
- 24 July 2021
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2021 (36) , 3776-3780
Open AccessA One‐Pot Synthesis of “K(hfa) glyme” Adducts: Effect of the Polyether Length on the Ion Coordination Sphere
Potassium complexes are starting to gather more and more interest from academia and industry because of their intriguing application possibilities. Novel adducts of potassium hexafluoroacetylacetonato [K(hfa)] with polyethers (monoglyme, diglyme, triglyme, and tetraglyme) were synthesized through a single step reaction and characterized through FT‐IR spectroscopy as well as 1H and 13C NMR spectroscopy. Single crystal X‐ray diffraction studies enabled the identification of fascinating K coordination polymeric networks.
- Open Access
- 13 May 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (5) , 1282
Exploring the Structural Competition between the Black and the Yellow Phase of CsPbI3
The realization of stable inorganic perovskites is crucial to enable low-cost solution-processed photovoltaics. However, the main candidate material, CsPbI3, suffers from a spontaneous phase transition at room temperature towards a photo-inactive orthorhombic δ-phase (yellow phase). Here we used theoretical and experimental methods to study the structural and electronic features that determine the stability of the CsPbI3 perovskite. We argued that the two physical characteristics that favor the black perovskite phase at low temperatures are the strong spatial confinement in nanocrystalline structures and the level of electron doping in the material. Within this context, we discussed practical procedures for the realization of long-lasting inorganic lead halide perovskites.
- 13 May 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (5) , 1282
Open AccessExploring the Structural Competition between the Black and the Yellow Phase of CsPbI3
The realization of stable inorganic perovskites is crucial to enable low-cost solution-processed photovoltaics. However, the main candidate material, CsPbI3, suffers from a spontaneous phase transition at room temperature towards a photo-inactive orthorhombic δ-phase (yellow phase). Here we used theoretical and experimental methods to study the structural and electronic features that determine the stability of the CsPbI3 perovskite. We argued that the two physical characteristics that favor the black perovskite phase at low temperatures are the strong spatial confinement in nanocrystalline structures and the level of electron doping in the material. Within this context, we discussed practical procedures for the realization of long-lasting inorganic lead halide perovskites.
- Open Access
Improved Electrical and Structural Stability in HTL-Free Perovskite Solar Cells by Vacuum Curing Treatment
Device engineering with proper material integration into perovskite solar cells (PSCs) would extend their durability provided a special care is spent to retain interface integrity during use. In this paper, we propose a method to preserve the perovskite (PSK) surface from solvent-mediated modification and damage that can occur during the deposition of a top contact and furtherly during operation. Our scheme used a hole transporting layer-free top-contact made of Carbon (mostly graphite) to the side of hole extraction. We demonstrated that the PSK/graphite interface benefits from applying a vacuum-curing step after contact deposition that allowed mitigating the loss in efficiency of the solar devices, as well as a full recovery of the electrical performances after device storage in dry nitrogen and dark conditions. The device durability compared to reference devices was tested over 90 days. Conductive atomic force microscopy (CAFM) disclosed an improved surface capability to hole exchange under the graphite contact after vacuum curing treatment.
Open AccessImproved Electrical and Structural Stability in HTL-Free Perovskite Solar Cells by Vacuum Curing Treatment
Device engineering with proper material integration into perovskite solar cells (PSCs) would extend their durability provided a special care is spent to retain interface integrity during use. In this paper, we propose a method to preserve the perovskite (PSK) surface from solvent-mediated modification and damage that can occur during the deposition of a top contact and furtherly during operation. Our scheme used a hole transporting layer-free top-contact made of Carbon (mostly graphite) to the side of hole extraction. We demonstrated that the PSK/graphite interface benefits from applying a vacuum-curing step after contact deposition that allowed mitigating the loss in efficiency of the solar devices, as well as a full recovery of the electrical performances after device storage in dry nitrogen and dark conditions. The device durability compared to reference devices was tested over 90 days. Conductive atomic force microscopy (CAFM) disclosed an improved surface capability to hole exchange under the graphite contact after vacuum curing treatment.
- Open Access
- 12 March 2019
- Published by MDPI AG in Chemosensors
- Vol. 7 (1) , 12
Porous Gig-Lox TiO2 Doped with N2 at Room Temperature for P-Type Response to Ethanol
Nanostructured materials represent a breakthrough in many fields of application. Above all for sensing, the use of nanostructures with a high surface/volume ratio is strategic to raise the sensitivity towards dangerous environmental gas species. A new Dc-Reactive sputtering Deposition method has been applied to grow highly porous p-type nitrogen-doped titanium oxide layers by modifying the previously developed reactive sputtering method called gig-lox. The doping of the films was achieved at room temperature by progressive incorporation of nitrogen species during the deposition process. Two different amounts of N2 were introduced into the deposition chamber at flow rates of 2 and 5 standard cubic centimeter per minutes (sccm) for doping. It has been found that the N2 uptake reduces the deposition rate of the TiO2 film whilst the porosity and the roughness of the grown layer are not penalized. Despite the low amount of N2, using 2 sccm of gas resulted in proper doping of the TiO2 film as revealed by XPS Analyses. In this case, nitrogen atoms are mainly arranged in substitutional positions with respect to the oxygen atoms inside the lattice, and this defines the p-type character of the growing layer. Above this strategic structural modification, the multibranched spongy porosity, peculiar of the gig-lox growth, is still maintained. As proof of concept of the achievements, a sensing device was prepared by combining this modified gig-lox deposition method with state-of-the-art hot-plate technology to monitor the electrical response to ethanol gas species. The sensor exhibited a sensitivity of a factor of ≈2 to 44 ppm of ethanol at ≈200 °C as measured by a rise in the layer resistivity according to the p-type character of the material. At the higher temperature of ≈350 °C, the sensor turned to n-type as without doping. This behavior was related to a loss of nitrogen content inside the film during the annealing. It was indeed proved that p-type doping of a gig-lox sponge during growth is feasible, even at room temperature, without losing the layer porosity and the capability to host and detect environmental species. Moreover, the material integration on a device is simply done as the last production step. Easy TiO2 doping procedures, combined with porosity, are of general purpose and interest for several applications even on flexible substrates.
- 12 March 2019
- Published by MDPI AG in Chemosensors
- Vol. 7 (1) , 12
Open AccessPorous Gig-Lox TiO2 Doped with N2 at Room Temperature for P-Type Response to Ethanol
Nanostructured materials represent a breakthrough in many fields of application. Above all for sensing, the use of nanostructures with a high surface/volume ratio is strategic to raise the sensitivity towards dangerous environmental gas species. A new Dc-Reactive sputtering Deposition method has been applied to grow highly porous p-type nitrogen-doped titanium oxide layers by modifying the previously developed reactive sputtering method called gig-lox. The doping of the films was achieved at room temperature by progressive incorporation of nitrogen species during the deposition process. Two different amounts of N2 were introduced into the deposition chamber at flow rates of 2 and 5 standard cubic centimeter per minutes (sccm) for doping. It has been found that the N2 uptake reduces the deposition rate of the TiO2 film whilst the porosity and the roughness of the grown layer are not penalized. Despite the low amount of N2, using 2 sccm of gas resulted in proper doping of the TiO2 film as revealed by XPS Analyses. In this case, nitrogen atoms are mainly arranged in substitutional positions with respect to the oxygen atoms inside the lattice, and this defines the p-type character of the growing layer. Above this strategic structural modification, the multibranched spongy porosity, peculiar of the gig-lox growth, is still maintained. As proof of concept of the achievements, a sensing device was prepared by combining this modified gig-lox deposition method with state-of-the-art hot-plate technology to monitor the electrical response to ethanol gas species. The sensor exhibited a sensitivity of a factor of ≈2 to 44 ppm of ethanol at ≈200 °C as measured by a rise in the layer resistivity according to the p-type character of the material. At the higher temperature of ≈350 °C, the sensor turned to n-type as without doping. This behavior was related to a loss of nitrogen content inside the film during the annealing. It was indeed proved that p-type doping of a gig-lox sponge during growth is feasible, even at room temperature, without losing the layer porosity and the capability to host and detect environmental species. Moreover, the material integration on a device is simply done as the last production step. Easy TiO2 doping procedures, combined with porosity, are of general purpose and interest for several applications even on flexible substrates.
- Open Access
Controlled Al3+ Incorporation in the ZnO Lattice at 188 °C by Soft Reactive Co-Sputtering for Transparent Conductive Oxides
Transparent conductive oxide (TCO) layers, to be implemented in photo-anodes for dye-sensitized solar cells (DSCs), were prepared by co-deposition of ZnO and Al using pulsed-direct current (DC)-magnetron reactive sputtering processes. The films were deposited at low deposition temperatures (RT-188 °C) and at fixed working pressure (1.4 Pa) using soft power loading conditions to avoid intrinsic extra-heating. To compensate the layer stoichiometry, O2 was selectively injected close to the sample in a small percentage (Ar:O2 = 69 sccm:2 sccm). We expressly applied the deposition temperature as a controlling parameter to tune the incorporation of the Al3+ species in the targeted position inside the ZnO lattice. With this method, Aluminum-doped Zinc Oxide films (ZnO:Al) were grown following the typical wurtzite structure, as demonstrated by X-ray Diffraction analyses. A combination of micro-Raman, X-ray photoelectron spectroscopy (XPS) and spectroscopic ellipsometry (SE) analyses has shown that the incorporated host-atoms are Al3+ species in Zn2+ substitutional position; their amount increases following a direct monotonic trend with the deposition temperature. Correspondently, the c-axis strain into the layer decreases due to the progressive ordering of the lattice structure and reducing clustering phenomena. The maximum average Al content inside the film was ~2%, as measured by energy dispersive X-ray (EDX) spectroscopy, with a uniform distribution of the dopant species along the layer thickness traced by depth-profile XPS analyses. The optimised ZnO:Al layer, deposited at a rate of ~7 nm/min, exhibits high transmittance in the visible range (~85%) and low resistivity values (~13 mΩ × cm). The material therefore fulfils all the requirements to be candidate as TCO for low-cost DSCs on flexible substrates for large area technologies.
Open AccessControlled Al3+ Incorporation in the ZnO Lattice at 188 °C by Soft Reactive Co-Sputtering for Transparent Conductive Oxides
Transparent conductive oxide (TCO) layers, to be implemented in photo-anodes for dye-sensitized solar cells (DSCs), were prepared by co-deposition of ZnO and Al using pulsed-direct current (DC)-magnetron reactive sputtering processes. The films were deposited at low deposition temperatures (RT-188 °C) and at fixed working pressure (1.4 Pa) using soft power loading conditions to avoid intrinsic extra-heating. To compensate the layer stoichiometry, O2 was selectively injected close to the sample in a small percentage (Ar:O2 = 69 sccm:2 sccm). We expressly applied the deposition temperature as a controlling parameter to tune the incorporation of the Al3+ species in the targeted position inside the ZnO lattice. With this method, Aluminum-doped Zinc Oxide films (ZnO:Al) were grown following the typical wurtzite structure, as demonstrated by X-ray Diffraction analyses. A combination of micro-Raman, X-ray photoelectron spectroscopy (XPS) and spectroscopic ellipsometry (SE) analyses has shown that the incorporated host-atoms are Al3+ species in Zn2+ substitutional position; their amount increases following a direct monotonic trend with the deposition temperature. Correspondently, the c-axis strain into the layer decreases due to the progressive ordering of the lattice structure and reducing clustering phenomena. The maximum average Al content inside the film was ~2%, as measured by energy dispersive X-ray (EDX) spectroscopy, with a uniform distribution of the dopant species along the layer thickness traced by depth-profile XPS analyses. The optimised ZnO:Al layer, deposited at a rate of ~7 nm/min, exhibits high transmittance in the visible range (~85%) and low resistivity values (~13 mΩ × cm). The material therefore fulfils all the requirements to be candidate as TCO for low-cost DSCs on flexible substrates for large area technologies.