Phi-Hai Trinh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Phi-Hai Trinh has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Il-Yop Chung
School of Electrical Engineering, Kookmin University, 77 Jeongneung-ro, Seongbuk-gu, Seoul 02707, Republic of Korea
7 shared publications Chairul Hudaya
1 shared publication- Dita Puspita
Department of Electrical Engineering, Kookmin University, Seoul, Republic of Korea
1 shared publication - Dongsup Jin
Department of Electrical, Electronic and Computer Engineering, University of Ulsan, Ulsan 44610, Republic of Korea
1 shared publication Hector Cho
School of Electrical Engineering, Kookmin University, Seoul, South Korea
1 shared publication- Hector Cho
School of Electrical Engineering, Kookmin University, 861-1, Jeongneung-dong, Seongbuk-gu, Seoul 02707, Korea
1 shared publication
Latest Publications
- Open Access
- 16 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 61195-61208
Adaptive Real-Time V2G Scheduling of Electric Vehicles in Renewable-Integrated Microgrids Using Deep Reinforcement Learning
The rapid growth of electric vehicles (EVs) in recent years has been propelled by their eco-friendly benefits and expanding role within sustainable energy systems. In smart grids, EVs act as flexible electrical loads and a distributed energy storage unit. Using vehicle-to-grid (V2G) technology, they exchange power bidirectionally to enhance microgrid flexibility and increase renewable-energy utilization. Leveraging time-varying electricity prices and V2G capabilities enables microgrid operators to cut operational costs by adjusting EV charge–discharge schedules. However, designing these optimal schedules is challenging, as EV arrival and departure times, as well as electricity price trajectories, are highly unpredictable. To address this issue, the scheduling problem was modeled within a Markov Decision Process (MDP) framework, followed by the development of a deep reinforcement learning (DRL)-based solution. Specifically, an algorithm based on a Twin-delayed deterministic policy gradient (TD3) is implemented to autonomously derive optimal continuous charging and discharging decisions through real-time interactions with the environment. Extensive simulations demonstrate that the proposed DRL-based framework effectively reduces microgrid operational costs while ensuring EV owner satisfaction through State of Charge (SoC) requirements, optimal use of photovoltaic (PV) energy, and coordinated real-time V2G scheduling across all vehicles.
- 16 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 61195-61208
Open AccessAdaptive Real-Time V2G Scheduling of Electric Vehicles in Renewable-Integrated Microgrids Using Deep Reinforcement Learning
The rapid growth of electric vehicles (EVs) in recent years has been propelled by their eco-friendly benefits and expanding role within sustainable energy systems. In smart grids, EVs act as flexible electrical loads and a distributed energy storage unit. Using vehicle-to-grid (V2G) technology, they exchange power bidirectionally to enhance microgrid flexibility and increase renewable-energy utilization. Leveraging time-varying electricity prices and V2G capabilities enables microgrid operators to cut operational costs by adjusting EV charge–discharge schedules. However, designing these optimal schedules is challenging, as EV arrival and departure times, as well as electricity price trajectories, are highly unpredictable. To address this issue, the scheduling problem was modeled within a Markov Decision Process (MDP) framework, followed by the development of a deep reinforcement learning (DRL)-based solution. Specifically, an algorithm based on a Twin-delayed deterministic policy gradient (TD3) is implemented to autonomously derive optimal continuous charging and discharging decisions through real-time interactions with the environment. Extensive simulations demonstrate that the proposed DRL-based framework effectively reduces microgrid operational costs while ensuring EV owner satisfaction through State of Charge (SoC) requirements, optimal use of photovoltaic (PV) energy, and coordinated real-time V2G scheduling across all vehicles.
- Open Access
Coordinated Voltage and Power Factor Optimization in EV- and DER-Integrated Distribution Systems Using an Adaptive Rolling Horizon Approach
The penetration of distributed energy resources (DERs), such as photovoltaic (PV) generation and electric vehicles (EVs), in distribution systems has been increasing rapidly. At the same time, load demand is rising due to the proliferation of data centers and the growing use of artificial intelligence. These trends have introduced new operational challenges: reverse power flow from PV generation during the day and low-voltage conditions during periods of peak load or when PV output is unavailable. To address these issues, this paper proposes a two-stage adaptive rolling horizon (ARH)-based model predictive control (MPC) framework for coordinated voltage and power factor (PF) control in distribution systems. The proposed framework, designed from the perspective of a distributed energy resource management system (DERMS), integrates EV charging and discharging scheduling with PV- and EV-connected inverter control. In the first stage, the ARH method optimizes EV charging and discharging schedules to regulate voltage levels. In the second stage, optimal power flow analysis is employed to adjust the voltage of distribution lines and the power factor at the substation through reactive power compensation, using PV- and EV-connected inverters. The proposed algorithm aims to maintain stable operation of the distribution system while minimizing PV curtailment by computing optimal control commands based on predicted PV generation, load forecasts, and EV data provided by vehicle owners. Simulation results on the IEEE 37-bus test feeder demonstrate that, under predicted PV and load profiles, the system voltage can be maintained within the normal range of 0.95–1.05 per unit (p.u.), the power factor is improved, and the state-of-charge (SOC) requirements of EV owners are satisfied. These results confirm that the proposed framework enables stable and cooperative operation of the distribution system without the need for additional infrastructure expansion.
Open AccessCoordinated Voltage and Power Factor Optimization in EV- and DER-Integrated Distribution Systems Using an Adaptive Rolling Horizon Approach
The penetration of distributed energy resources (DERs), such as photovoltaic (PV) generation and electric vehicles (EVs), in distribution systems has been increasing rapidly. At the same time, load demand is rising due to the proliferation of data centers and the growing use of artificial intelligence. These trends have introduced new operational challenges: reverse power flow from PV generation during the day and low-voltage conditions during periods of peak load or when PV output is unavailable. To address these issues, this paper proposes a two-stage adaptive rolling horizon (ARH)-based model predictive control (MPC) framework for coordinated voltage and power factor (PF) control in distribution systems. The proposed framework, designed from the perspective of a distributed energy resource management system (DERMS), integrates EV charging and discharging scheduling with PV- and EV-connected inverter control. In the first stage, the ARH method optimizes EV charging and discharging schedules to regulate voltage levels. In the second stage, optimal power flow analysis is employed to adjust the voltage of distribution lines and the power factor at the substation through reactive power compensation, using PV- and EV-connected inverters. The proposed algorithm aims to maintain stable operation of the distribution system while minimizing PV curtailment by computing optimal control commands based on predicted PV generation, load forecasts, and EV data provided by vehicle owners. Simulation results on the IEEE 37-bus test feeder demonstrate that, under predicted PV and load profiles, the system voltage can be maintained within the normal range of 0.95–1.05 per unit (p.u.), the power factor is improved, and the state-of-charge (SOC) requirements of EV owners are satisfied. These results confirm that the proposed framework enables stable and cooperative operation of the distribution system without the need for additional infrastructure expansion.
- 8 February 2025
- Published by Elsevier in Electric Power Systems Research
- Vol. 243
Coordinated control strategy for hybrid multi-PEMFC/BESS in a shipboard power system
- 8 February 2025
- Published by Elsevier in Electric Power Systems Research
- Vol. 243
Coordinated control strategy for hybrid multi-PEMFC/BESS in a shipboard power system
- Open Access
Integrated Active and Reactive Power Control Methods for Distributed Energy Resources in Distribution Systems for Enhancing Hosting Capacity
Recently, there has been a significant increase in the integration of distributed energy resources (DERs) such as small-scale photovoltaic systems and wind turbines in power distribution systems. When the aggregated outputs of DERs are combined, excessive reverse current may occur in distribution lines, leading to overvoltage issues and exceeding thermal limits of the distribution lines. To address these issues, it is necessary to limit the output of DERs to a certain level, which results in constraining the hosting capacity of DERs in the distribution system. In this paper, coordination control methodologies of DERs are developed and executed to mitigate the overvoltage and overcurrent induced by DERs, thereby increasing the hosting capacity for DERs of the distribution system. This paper proposes three coordinated approaches of active and reactive power control of DERs, namely Var Precedence, Watt Precedence, and Integrated Watt and Var Control. The Var and Watt Precedence prioritizes reactive power for voltage (Q–V) and active power for current (P–I) to address network congestion, thereby enhancing hosting capacity. Conversely, the Integrated Var and Watt Precedence propose a novel algorithm that combines four control indices (Q–V, P–V, Q–I, and P–I) to solve network problems while maximizing hosting capacity. The three proposed methods are based on the sensitivity analysis of voltage and current to the active and reactive power outputs at the DER installation locations on the distribution lines, aiming to minimize DER active power curtailment. Each sensitivity is derived from linearized power equations at the operating points of the distribution system. To minimize the computation burden of iterative computation, each proposed method decouples active and reactive power and proceeds with sequential control in its own unique way, iteratively determining the precise output control of distributed power sources to reduce linearization errors. The three proposed algorithms are verified via case studies, evaluating their performance compared to conventional approaches. The case studies exhibit superior control effectiveness of the proposed DER power control methods compared to conventional methods when issues such as overvoltage and overcurrent occur simultaneously in the distribution line so that the DER hosting capacity of the system can be improved.
Open AccessIntegrated Active and Reactive Power Control Methods for Distributed Energy Resources in Distribution Systems for Enhancing Hosting Capacity
Recently, there has been a significant increase in the integration of distributed energy resources (DERs) such as small-scale photovoltaic systems and wind turbines in power distribution systems. When the aggregated outputs of DERs are combined, excessive reverse current may occur in distribution lines, leading to overvoltage issues and exceeding thermal limits of the distribution lines. To address these issues, it is necessary to limit the output of DERs to a certain level, which results in constraining the hosting capacity of DERs in the distribution system. In this paper, coordination control methodologies of DERs are developed and executed to mitigate the overvoltage and overcurrent induced by DERs, thereby increasing the hosting capacity for DERs of the distribution system. This paper proposes three coordinated approaches of active and reactive power control of DERs, namely Var Precedence, Watt Precedence, and Integrated Watt and Var Control. The Var and Watt Precedence prioritizes reactive power for voltage (Q–V) and active power for current (P–I) to address network congestion, thereby enhancing hosting capacity. Conversely, the Integrated Var and Watt Precedence propose a novel algorithm that combines four control indices (Q–V, P–V, Q–I, and P–I) to solve network problems while maximizing hosting capacity. The three proposed methods are based on the sensitivity analysis of voltage and current to the active and reactive power outputs at the DER installation locations on the distribution lines, aiming to minimize DER active power curtailment. Each sensitivity is derived from linearized power equations at the operating points of the distribution system. To minimize the computation burden of iterative computation, each proposed method decouples active and reactive power and proceeds with sequential control in its own unique way, iteratively determining the precise output control of distributed power sources to reduce linearization errors. The three proposed algorithms are verified via case studies, evaluating their performance compared to conventional approaches. The case studies exhibit superior control effectiveness of the proposed DER power control methods compared to conventional methods when issues such as overvoltage and overcurrent occur simultaneously in the distribution line so that the DER hosting capacity of the system can be improved.
- Open Access
- 27 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 133668-133680
Optimal PEV Charging and Discharging Algorithms to Reduce Operational Cost of Microgrid Using Adaptive Rolling Horizon Framework
This paper presents an optimal operation algorithm for a grid-connected microgrid that incorporates renewable energy sources (RESs), plug-in electric vehicle (PEV) charging/discharging stations, and local loads. The aim of this work is to not only propose a microgrid operating algorithm but also implement it within the microgrid energy management system. The primary objective of the proposed algorithm is to reduce the overall operational cost of the microgrid while minimizing the PEV charging bills simultaneously. To this end, we propose an adaptive PEV power charging/discharging and power exchange (grid exporting/importing) scheduling strategy that accounts for the uncertainty of RES power generation, loads, and electric pricing. To address the dynamic arrival of PEVs, we propose an online optimization scheme using an adaptive rolling horizon framework. The size of the rolling window is adjusted in each time step to adapt to the dynamic nature of the PEV charging period. Additionally, we propose the design of a dynamic pricing model for PEV charging and discharging to achieve power system balance within the microgrid, thereby optimizing operating costs and minimizing PEV charging bills further. Through simulations, we demonstrate the effectiveness of the proposed strategies, which are expected to benefit both the microgrid operators and PEV owners.
- 27 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 133668-133680
Open AccessOptimal PEV Charging and Discharging Algorithms to Reduce Operational Cost of Microgrid Using Adaptive Rolling Horizon Framework
This paper presents an optimal operation algorithm for a grid-connected microgrid that incorporates renewable energy sources (RESs), plug-in electric vehicle (PEV) charging/discharging stations, and local loads. The aim of this work is to not only propose a microgrid operating algorithm but also implement it within the microgrid energy management system. The primary objective of the proposed algorithm is to reduce the overall operational cost of the microgrid while minimizing the PEV charging bills simultaneously. To this end, we propose an adaptive PEV power charging/discharging and power exchange (grid exporting/importing) scheduling strategy that accounts for the uncertainty of RES power generation, loads, and electric pricing. To address the dynamic arrival of PEVs, we propose an online optimization scheme using an adaptive rolling horizon framework. The size of the rolling window is adjusted in each time step to adapt to the dynamic nature of the PEV charging period. Additionally, we propose the design of a dynamic pricing model for PEV charging and discharging to achieve power system balance within the microgrid, thereby optimizing operating costs and minimizing PEV charging bills further. Through simulations, we demonstrate the effectiveness of the proposed strategies, which are expected to benefit both the microgrid operators and PEV owners.
- Open Access
Optimal Control Strategy for Distributed Energy Resources in a DC Microgrid for Energy Cost Reduction and Voltage Regulation
Distributed energy resources (DERs), including renewable energy resources (RESs) and electric vehicles (EVs), have a significant impact on distribution systems because they can cause bi-directional power flow in the distribution lines. Thus, the voltage regulation and thermal limits of the distribution system to mitigate from the excessive power generation or consumption should be considered. The focus of this study is on a control strategy for DERs in low-voltage DC microgrids to minimize the operating costs and maintain the distribution voltage within the normal range based on intelligent scheduling of the charging and discharging of EVs, and to take advantage of RESs such as photovoltaic (PV) plants. By considering the time-of-use electricity rates, we also propose a 24-h sliding window to mitigate uncertainties in loads and PV plants in which the output is time-varied and the EV arrival cannot be predicted. After obtaining a request from the EV owner, the proposed optimal DER control method satisfies the state-of-charge level for their next journey. We applied the voltage sensitivity factor obtained from a load-flow analysis to effectively maintain voltage profiles for the overall DC distribution system. The performance of the proposed optimal DER control method was evaluated with case studies and by comparison with conventional methods.
Open AccessOptimal Control Strategy for Distributed Energy Resources in a DC Microgrid for Energy Cost Reduction and Voltage Regulation
Distributed energy resources (DERs), including renewable energy resources (RESs) and electric vehicles (EVs), have a significant impact on distribution systems because they can cause bi-directional power flow in the distribution lines. Thus, the voltage regulation and thermal limits of the distribution system to mitigate from the excessive power generation or consumption should be considered. The focus of this study is on a control strategy for DERs in low-voltage DC microgrids to minimize the operating costs and maintain the distribution voltage within the normal range based on intelligent scheduling of the charging and discharging of EVs, and to take advantage of RESs such as photovoltaic (PV) plants. By considering the time-of-use electricity rates, we also propose a 24-h sliding window to mitigate uncertainties in loads and PV plants in which the output is time-varied and the EV arrival cannot be predicted. After obtaining a request from the EV owner, the proposed optimal DER control method satisfies the state-of-charge level for their next journey. We applied the voltage sensitivity factor obtained from a load-flow analysis to effectively maintain voltage profiles for the overall DC distribution system. The performance of the proposed optimal DER control method was evaluated with case studies and by comparison with conventional methods.
- 1 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Development of voltage control system for multi-terminal low-voltage DC distribution system
LVDC (Low Voltage Direct Current) distribution systems have advantages over conventional AC distribution systems in terms of power quality, power-conversion-loss reduction, renewable energy integration, and so on. There were pioneering researches into development of LVDC distribution systems but most of them considered radial distribution systems with one grid-connection converter. In this paper, we propose multi-terminal LVDC distribution system that has multiple grid-connection points and integration of distributed energy resources (DERs). The multi-terminal LVDC system can have more reliability and flexibility in electric power provision because it has multiple grid-interfacing AC/DC converters. However, multiple paths for power flows can increase the complexity in system operation and control. This paper proposes a new voltage control method for multi-terminal LVDC distribution systems using multi-agent system (MAS). This paper presents the hierarchical control algorithms to coordinate multiple AC/DC converters and DERs. Simulation studies demonstrates the performance of the proposed method.
- 1 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Development of voltage control system for multi-terminal low-voltage DC distribution system
LVDC (Low Voltage Direct Current) distribution systems have advantages over conventional AC distribution systems in terms of power quality, power-conversion-loss reduction, renewable energy integration, and so on. There were pioneering researches into development of LVDC distribution systems but most of them considered radial distribution systems with one grid-connection converter. In this paper, we propose multi-terminal LVDC distribution system that has multiple grid-connection points and integration of distributed energy resources (DERs). The multi-terminal LVDC system can have more reliability and flexibility in electric power provision because it has multiple grid-interfacing AC/DC converters. However, multiple paths for power flows can increase the complexity in system operation and control. This paper proposes a new voltage control method for multi-terminal LVDC distribution systems using multi-agent system (MAS). This paper presents the hierarchical control algorithms to coordinate multiple AC/DC converters and DERs. Simulation studies demonstrates the performance of the proposed method.
- Open Access
A Novel Voltage Control Scheme for Low-Voltage DC Distribution Systems Using Multi-Agent Systems
Low-voltage direct current (LVDC) distribution systems have been evolving into interesting ways of integrating distributed energy resources (DERs) and power electronics loads to local distribution networks. In LVDC distribution systems, voltage regulation is one of the most important issues, whereas AC systems have concerns such as frequency, power factor, reactive power, harmonic distortion and so on. This paper focuses on a voltage control method for a LVDC distribution system based on the concept of multi-agent system (MAS), which can deploy intelligence and decision-making abilities to local areas. This paper proposes a distributed power flow analysis method using local information refined by local agents and communication between agents based on MAS. This paper also proposes a voltage control method by coordinating the main AC/DC converter and multiple DERs. By using the proposed method, we can effectively maintain the line voltages in a pre-defined normal range. The performance of the proposed voltage control method is evaluated by case studies and compared to conventional methods.
Open AccessA Novel Voltage Control Scheme for Low-Voltage DC Distribution Systems Using Multi-Agent Systems
Low-voltage direct current (LVDC) distribution systems have been evolving into interesting ways of integrating distributed energy resources (DERs) and power electronics loads to local distribution networks. In LVDC distribution systems, voltage regulation is one of the most important issues, whereas AC systems have concerns such as frequency, power factor, reactive power, harmonic distortion and so on. This paper focuses on a voltage control method for a LVDC distribution system based on the concept of multi-agent system (MAS), which can deploy intelligence and decision-making abilities to local areas. This paper proposes a distributed power flow analysis method using local information refined by local agents and communication between agents based on MAS. This paper also proposes a voltage control method by coordinating the main AC/DC converter and multiple DERs. By using the proposed method, we can effectively maintain the line voltages in a pre-defined normal range. The performance of the proposed voltage control method is evaluated by case studies and compared to conventional methods.