Jéssica Teixeira da Silveira
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Jéssica Teixeira da Silveira has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Jorge Alberto Vieira Costa
Laboratory of Biochemical Engineering, College of Chemistry and Food Engineering, Federal University of Rio Grande, Rio Grande, Brazil
7 shared publications - Michele Greque de Morais
Laboratory of Microbiology and Biochemistry, College of Chemistry and Food Engineering, Federal University of Rio Grande, Rio Grande, Brazil
7 shared publications - Ana Priscila Centeno da Rosa
College of Chemistry and Food Engineering, Laboratory of Biochemical Engineering, Federal University of Rio Grande, Rio Grande, Brazil
2 shared publications - Bárbara Bastos de Freitas
King Abdullah University of Science and Technology
2 shared publications - Camila Gonzales Cruz
College of Chemistry and Food Engineering, Laboratory of Biochemical Engineering, Federal University of Rio Grande, Rio Grande, Brazil
2 shared publications - Deivid Arimatea Saldanha de Melo
Universidade Federal de Alfenas, Brasil
2 shared publications
Latest Publications
- Open Access
- 1 January 2025
- Published by Revista Brasileira de Geografia Fisica in Revista Brasileira de Geografia Física
- Vol. 18 (1) , 771-787
Transporte fluvial do Rio Paraopeba (MG) a montante do Reservatório de Retiro Baixo: após o rompimento da Barragem de rejeitos B11
A bacia hidrográfica do Rio Paraopeba localiza-se na região central do estado de Minas Gerais. O Reservatório de Retiro Baixo foi construído no baixo curso a aproximadamente 300 km da Barragem B1, onde os rejeitos da Mina Córrego do Feijão verteram após o rompimento de 25 de janeiro de 2019. Este trabalho avaliou o transporte fluvial em t/ano pelo método estocástico, para nutrientes e principalmente os metais Mn, Cu e Fe entre fevereiro de 2019 a agosto de 2022, tendo sido realizadas dez amostragens na ponte da Rodovia MG 420 antes do reservatório. Para turbidez, oxigênio dissolvido, manganês, cobre, ferro e fósforo total algumas amostras apresentam desconformidade com a legislação vigente. Estas características também influenciam no transporte fluvial de nutrientes 29,18x103 t de Na+, 8,97x103 t de K+, 7,88x103 t de SO42-, 9,67x103 t de NO3-, 1,50x103 t de PO43- e 0,49x103 t de P e metais, 77,44 t de Mn, 0,23 x103 t de Cu e de 1,37 x103 t de Fe que são anualmente carreados e transportados ao reservatório pelo Rio Paraopeba. A bacia apresenta um complexo quadro geológico e pedológico, uso da terra diversificado com grande urbanização, atividades industriais, agrícolas, pastagens efluentes, dentre outros que, juntamente com a rompimento da barragem B1 e altos índices pluviométricos que favorecem o aumento das vazões e deflúvios entre os meses de outubro e março, vem contribuindo para o transporte fluvial e a qualidade de suas águas.
- 1 January 2025
- Published by Revista Brasileira de Geografia Fisica in Revista Brasileira de Geografia Física
- Vol. 18 (1) , 771-787
Open AccessTransporte fluvial do Rio Paraopeba (MG) a montante do Reservatório de Retiro Baixo: após o rompimento da Barragem de rejeitos B11
A bacia hidrográfica do Rio Paraopeba localiza-se na região central do estado de Minas Gerais. O Reservatório de Retiro Baixo foi construído no baixo curso a aproximadamente 300 km da Barragem B1, onde os rejeitos da Mina Córrego do Feijão verteram após o rompimento de 25 de janeiro de 2019. Este trabalho avaliou o transporte fluvial em t/ano pelo método estocástico, para nutrientes e principalmente os metais Mn, Cu e Fe entre fevereiro de 2019 a agosto de 2022, tendo sido realizadas dez amostragens na ponte da Rodovia MG 420 antes do reservatório. Para turbidez, oxigênio dissolvido, manganês, cobre, ferro e fósforo total algumas amostras apresentam desconformidade com a legislação vigente. Estas características também influenciam no transporte fluvial de nutrientes 29,18x103 t de Na+, 8,97x103 t de K+, 7,88x103 t de SO42-, 9,67x103 t de NO3-, 1,50x103 t de PO43- e 0,49x103 t de P e metais, 77,44 t de Mn, 0,23 x103 t de Cu e de 1,37 x103 t de Fe que são anualmente carreados e transportados ao reservatório pelo Rio Paraopeba. A bacia apresenta um complexo quadro geológico e pedológico, uso da terra diversificado com grande urbanização, atividades industriais, agrícolas, pastagens efluentes, dentre outros que, juntamente com a rompimento da barragem B1 e altos índices pluviométricos que favorecem o aumento das vazões e deflúvios entre os meses de outubro e março, vem contribuindo para o transporte fluvial e a qualidade de suas águas.
- Open Access
Major, Trace and Rare Earth Elements Geochemistry of Bottom Sediments in the Retiro Baixo Reservoir after the B1 Tailings Dam Rupture, Paraopeba River (Brazil)
The rupture of an iron mining tailing dam in Brumadinho, Brazil, released around 10 million cubic meters of tailings, of which 1.6 Mm3 reached the Paraopeba River. In this work, a total of 30 samples from three bottom sediment cores were collected in the lower course of the Paraopeba River basin and analyzed for major, trace and rare earth elements by ICP-OES and ICP-MS. The sediments presented a range of compositions with different weathering histories, overall marked by depleted Ca2+, Na+ and K+ compared with the average UCC, PAAS and NASC and some advanced weathering trends. The samples presented a fractionation pattern characterized by a continuous depletion of light REEs from La to Sm and a regular decreased distribution of heavy REEs from Gd to Yb, and the Co/Th vs. La/Sc diagram indicates a predominant intermediate source. The upper samples presented the highest contents of REEs, probably due to the higher presence of iron and aluminum oxides and hydroxides, which can be related to more advanced weathering. The Al, Cu, Ni, V, Zn, Co, Mn, Ti, Fe and Si concentrations and the CF, EF and Igeo index values varied across the sediment core samples, demonstrating that there were long periods of geogenic or anthropogenic contributions.
Open AccessMajor, Trace and Rare Earth Elements Geochemistry of Bottom Sediments in the Retiro Baixo Reservoir after the B1 Tailings Dam Rupture, Paraopeba River (Brazil)
The rupture of an iron mining tailing dam in Brumadinho, Brazil, released around 10 million cubic meters of tailings, of which 1.6 Mm3 reached the Paraopeba River. In this work, a total of 30 samples from three bottom sediment cores were collected in the lower course of the Paraopeba River basin and analyzed for major, trace and rare earth elements by ICP-OES and ICP-MS. The sediments presented a range of compositions with different weathering histories, overall marked by depleted Ca2+, Na+ and K+ compared with the average UCC, PAAS and NASC and some advanced weathering trends. The samples presented a fractionation pattern characterized by a continuous depletion of light REEs from La to Sm and a regular decreased distribution of heavy REEs from Gd to Yb, and the Co/Th vs. La/Sc diagram indicates a predominant intermediate source. The upper samples presented the highest contents of REEs, probably due to the higher presence of iron and aluminum oxides and hydroxides, which can be related to more advanced weathering. The Al, Cu, Ni, V, Zn, Co, Mn, Ti, Fe and Si concentrations and the CF, EF and Igeo index values varied across the sediment core samples, demonstrating that there were long periods of geogenic or anthropogenic contributions.
- Open Access
- 26 April 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (9) , 3715
Indole-3-Acetic Acid Action in Outdoor and Indoor Cultures of Spirulina in Open Raceway Reactors
A significant research gap exists in investigating large-scale microalgae cultures exposed to outdoor conditions, with the addition of phytohormones using non-sterile growth media. Implementing these conditions is crucial for verifying the industrial viability of this strategy. This study aimed to evaluate the effect of indole-3-acetic acid (IAA) supplementation on Spirulina sp. LEB 18 cultures conducted indoors and outdoors in raceway bioreactors. The outdoor experiments were performed under uncontrolled environmental conditions. The indoor cultures were maintained within a thermostat-controlled chamber at a consistent temperature and lighting intensity. The outdoor experiments supplemented with IAA achieved a biomass concentration of 5.43 g L−1 and productivity of 173.9 mg L−1 d−1. These values increased 122.5% and 130.9% in biomass concentration and productivity, respectively, compared to the indoor experiments with the same supplementation. Moreover, roughly half of the biomass generated from outdoor cultivation with IAA consisted of carbohydrates (45%). Compared to indoor cultivation, this approach reduced production costs for biomass (55%) and lowered production costs for carbohydrates, proteins, and lipids by 86%, 44%, and 50%, respectively. The successful application of phytohormones in microalgae cultures, particularly under larger scale, nonsterile, and outdoor conditions, represents a significant advancement toward industrial implementation.
- 26 April 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (9) , 3715
Open AccessIndole-3-Acetic Acid Action in Outdoor and Indoor Cultures of Spirulina in Open Raceway Reactors
A significant research gap exists in investigating large-scale microalgae cultures exposed to outdoor conditions, with the addition of phytohormones using non-sterile growth media. Implementing these conditions is crucial for verifying the industrial viability of this strategy. This study aimed to evaluate the effect of indole-3-acetic acid (IAA) supplementation on Spirulina sp. LEB 18 cultures conducted indoors and outdoors in raceway bioreactors. The outdoor experiments were performed under uncontrolled environmental conditions. The indoor cultures were maintained within a thermostat-controlled chamber at a consistent temperature and lighting intensity. The outdoor experiments supplemented with IAA achieved a biomass concentration of 5.43 g L−1 and productivity of 173.9 mg L−1 d−1. These values increased 122.5% and 130.9% in biomass concentration and productivity, respectively, compared to the indoor experiments with the same supplementation. Moreover, roughly half of the biomass generated from outdoor cultivation with IAA consisted of carbohydrates (45%). Compared to indoor cultivation, this approach reduced production costs for biomass (55%) and lowered production costs for carbohydrates, proteins, and lipids by 86%, 44%, and 50%, respectively. The successful application of phytohormones in microalgae cultures, particularly under larger scale, nonsterile, and outdoor conditions, represents a significant advancement toward industrial implementation.
- Open Access
- 13 October 2023
- Published by Springer Nature in Journal of Applied Phycology
- Vol. 35 (6) , 2689-2708
Biomass valorization via pyrolysis in microalgae-based wastewater treatment: Challenges and opportunities for a circular bioeconomy
Microalgae-based wastewater treatment technology is a sustainable and environmentally friendly alternative to conventional treatment systems. The biomass produced during microalgae-based wastewater treatment can be valorized via pyrolysis to generate multiple valuable products, such as biochar, bio-oil, and pyrolytic gas. This study summarizes the potential of pyrolysis for valorizing microalgal biomass produced from wastewater treatment. It shows how pyrolysis can provide a variety of valuable products, the composition of which is influenced by the type of microalgae used, the operating conditions of the pyrolysis process, and the presence of contaminants in the biomass. It also highlights the main challenges to be addressed before pyrolysis can be adopted to valorize microalgae biomass. These challenges include the high energy requirements of pyrolysis, the need for further research to optimize the process, and the potential for pyrolysis to produce harmful emissions. Despite this, pyrolysis appears as a promising technology with potential to contribute to the sustainable development of a circular economy. Future research should address these challenges and develop more efficient and environmentally friendly pyrolysis processes. Graphical abstract
- 13 October 2023
- Published by Springer Nature in Journal of Applied Phycology
- Vol. 35 (6) , 2689-2708
Open AccessBiomass valorization via pyrolysis in microalgae-based wastewater treatment: Challenges and opportunities for a circular bioeconomy
Microalgae-based wastewater treatment technology is a sustainable and environmentally friendly alternative to conventional treatment systems. The biomass produced during microalgae-based wastewater treatment can be valorized via pyrolysis to generate multiple valuable products, such as biochar, bio-oil, and pyrolytic gas. This study summarizes the potential of pyrolysis for valorizing microalgal biomass produced from wastewater treatment. It shows how pyrolysis can provide a variety of valuable products, the composition of which is influenced by the type of microalgae used, the operating conditions of the pyrolysis process, and the presence of contaminants in the biomass. It also highlights the main challenges to be addressed before pyrolysis can be adopted to valorize microalgae biomass. These challenges include the high energy requirements of pyrolysis, the need for further research to optimize the process, and the potential for pyrolysis to produce harmful emissions. Despite this, pyrolysis appears as a promising technology with potential to contribute to the sustainable development of a circular economy. Future research should address these challenges and develop more efficient and environmentally friendly pyrolysis processes. Graphical abstract
- Open Access
- 4 October 2023
- Published by MDPI AG in Polysaccharides
- Vol. 4 (4) , 371-389
Algal Polysaccharides-Based Nanomaterials: General Aspects and Potential Applications in Food and Biomedical Fields
The use of natural polymers has increased due to concern about environmental pollution caused by plastics and emerging pollutants from fossil fuels. In this context, polysaccharides from macroalgae and microalgae arise as natural and abundant resources for various biological, biomedical, and food applications. Different nanomaterials are produced from these polysaccharides to act as effective carriers in the food and pharmaceutical industry: drug and nutrient carriers, active compound encapsulation, and delivery of therapeutic agents to tumor tissues. Polysaccharides-based nanomaterials applied as functional ingredients incorporated into foods can improve texture properties and decrease the caloric density of food products. These nanostructures also present the potential for developing food packaging with antioxidant and antimicrobial properties. In addition, polysaccharides-based nanomaterials are biocompatible, biodegradable, and safe for medical practices to prevent and manage various chronic diseases, such as diabetes, obesity, and cardiovascular disease. In this sense, this review article addresses the use of algal polysaccharides for manufacturing nanomaterials and their potential applications in food and biomedical areas. In addition, the paper discusses the general aspects of algae as a source of polysaccharides, the nanomaterials produced from these polymers, as well as recent studies and the potential use of algal polysaccharides for industries.
- 4 October 2023
- Published by MDPI AG in Polysaccharides
- Vol. 4 (4) , 371-389
Open AccessAlgal Polysaccharides-Based Nanomaterials: General Aspects and Potential Applications in Food and Biomedical Fields
The use of natural polymers has increased due to concern about environmental pollution caused by plastics and emerging pollutants from fossil fuels. In this context, polysaccharides from macroalgae and microalgae arise as natural and abundant resources for various biological, biomedical, and food applications. Different nanomaterials are produced from these polysaccharides to act as effective carriers in the food and pharmaceutical industry: drug and nutrient carriers, active compound encapsulation, and delivery of therapeutic agents to tumor tissues. Polysaccharides-based nanomaterials applied as functional ingredients incorporated into foods can improve texture properties and decrease the caloric density of food products. These nanostructures also present the potential for developing food packaging with antioxidant and antimicrobial properties. In addition, polysaccharides-based nanomaterials are biocompatible, biodegradable, and safe for medical practices to prevent and manage various chronic diseases, such as diabetes, obesity, and cardiovascular disease. In this sense, this review article addresses the use of algal polysaccharides for manufacturing nanomaterials and their potential applications in food and biomedical areas. In addition, the paper discusses the general aspects of algae as a source of polysaccharides, the nanomaterials produced from these polymers, as well as recent studies and the potential use of algal polysaccharides for industries.
- 2 June 2023
- Published by Taylor & Francis
- p. 321-344
Bioconversion of Agro-Wastes by Microalgae for Application as Biofertilizers
The expansion of agricultural activities is responsible for the high generation of waste such as agro-wastes. These wastes have a high concentration of nutrients (carbon, nitrogen, and phosphorus) and are discarded, often without treatment. This fact has consequences such as pollution of the environment, causing harmful effects on human and animal health. In this way, microalgae can be applied to treat these wastes. These microorganisms are capable of completely removing nitrogen and phosphorus contained in agro-wastes. Thus, on an industrial scale, the nutrients required by microalgae can be supplied by using these residues as nutrients. This substitution brings benefits to the environment and has economic advantages since it reduces costs with the culture medium. Besides, from microalgal cultivations with agro-wastes, it is possible to produce biomass for application in various products, including microalgal biofertilizers. Biofertilizers are natural agricultural inputs and are alternatives to replace chemical fertilizers. They are used in large volumes in agriculture activities and contain toxic elements that contaminate food, soil, and water. In this context, the chapter addresses the solid residues and agricultural wastewater with the potential for use in the microalgae bioconversion process and the biochemical aspects involved. The use of microalgae as biofertilizers, the challenges, and the prospects for expanding this agricultural practice are also presented.
- 2 June 2023
- Published by Taylor & Francis
- p. 321-344
Bioconversion of Agro-Wastes by Microalgae for Application as Biofertilizers
The expansion of agricultural activities is responsible for the high generation of waste such as agro-wastes. These wastes have a high concentration of nutrients (carbon, nitrogen, and phosphorus) and are discarded, often without treatment. This fact has consequences such as pollution of the environment, causing harmful effects on human and animal health. In this way, microalgae can be applied to treat these wastes. These microorganisms are capable of completely removing nitrogen and phosphorus contained in agro-wastes. Thus, on an industrial scale, the nutrients required by microalgae can be supplied by using these residues as nutrients. This substitution brings benefits to the environment and has economic advantages since it reduces costs with the culture medium. Besides, from microalgal cultivations with agro-wastes, it is possible to produce biomass for application in various products, including microalgal biofertilizers. Biofertilizers are natural agricultural inputs and are alternatives to replace chemical fertilizers. They are used in large volumes in agriculture activities and contain toxic elements that contaminate food, soil, and water. In this context, the chapter addresses the solid residues and agricultural wastewater with the potential for use in the microalgae bioconversion process and the biochemical aspects involved. The use of microalgae as biofertilizers, the challenges, and the prospects for expanding this agricultural practice are also presented.
- 28 November 2022
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 195 (5) , 2882-2892
Cost Reduction in the Production of Spirulina Biomass and Biomolecules from Indole-3-Acetic Acid Supplementation in Different Growth Phases
Despite the great potential for the industrial application of microalgae, production costs are still too high to make them a competitive raw material for commodities. Therefore, studying more efficient cultivation strategies in biomass production and economic viability is necessary. In this sense, this work aimed to reduce the production costs of biomass and biomolecules using phytohormone indole-3-acetic acid in different phases of Spirulina sp. LEB 18 cultivation. The experiments were conducted on bench scale indoor for 30 days. In each couple of experiments, the phytohormone was added on different days. The supplementation of indole-3-acetic acid on half of the growth deceleration phase of the microalga showed a cost reduction of 27%, 34%, and 75% for biomass, proteins, and carbohydrates, respectively. In addition, the strategy increased the final biomass concentration and carbohydrate content at 31.2 and 33.8%, respectively, compared to the condition without phytohormone. This study is the starting point for implementing phytohormone supplementation in industrial microalgal cultures.
- 28 November 2022
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 195 (5) , 2882-2892
Cost Reduction in the Production of Spirulina Biomass and Biomolecules from Indole-3-Acetic Acid Supplementation in Different Growth Phases
Despite the great potential for the industrial application of microalgae, production costs are still too high to make them a competitive raw material for commodities. Therefore, studying more efficient cultivation strategies in biomass production and economic viability is necessary. In this sense, this work aimed to reduce the production costs of biomass and biomolecules using phytohormone indole-3-acetic acid in different phases of Spirulina sp. LEB 18 cultivation. The experiments were conducted on bench scale indoor for 30 days. In each couple of experiments, the phytohormone was added on different days. The supplementation of indole-3-acetic acid on half of the growth deceleration phase of the microalga showed a cost reduction of 27%, 34%, and 75% for biomass, proteins, and carbohydrates, respectively. In addition, the strategy increased the final biomass concentration and carbohydrate content at 31.2 and 33.8%, respectively, compared to the condition without phytohormone. This study is the starting point for implementing phytohormone supplementation in industrial microalgal cultures.
- 1 October 2019
- Published by Elsevier in Progress in Organic Coatings
- Vol. 135, 100-104
The use of poly(3-hydroxybutyrate), C-phycocyanin, and phenolic compounds extracted from Spirulina sp. LEB 18 in latex paint formulations
- 1 October 2019
- Published by Elsevier in Progress in Organic Coatings
- Vol. 135, 100-104
The use of poly(3-hydroxybutyrate), C-phycocyanin, and phenolic compounds extracted from Spirulina sp. LEB 18 in latex paint formulations
- 7 February 2019
- Published by Taylor & Francis in Journal of Environmental Science and Health, Part B
- Vol. 54 (5) , 366-375
Potential of microalgae as biopesticides to contribute to sustainable agriculture and environmental development
The loss of yields from agricultural production due to the presence of pests has been treated over the years with synthetic pesticides, but the use of these substances negatively affects the environment and presents health risks for consumers and animals. The development of agroecological systems using biopesticides represents a safe alternative that contributes to the reduction of agrochemical use and sustainable agriculture. Microalgae are able to biosynthesize a number of metabolites with potential biopesticidal action and can be considered potential biological agents for the control of harmful organisms to soils and plants. The present work aims to provide a critical perspective on the consequences of using synthetic pesticides, offering as an alternative the biopesticides obtained from microalgal biomass, which can be used together with the implementation of environmentally friendly agricultural systems.
- 7 February 2019
- Published by Taylor & Francis in Journal of Environmental Science and Health, Part B
- Vol. 54 (5) , 366-375
Potential of microalgae as biopesticides to contribute to sustainable agriculture and environmental development
The loss of yields from agricultural production due to the presence of pests has been treated over the years with synthetic pesticides, but the use of these substances negatively affects the environment and presents health risks for consumers and animals. The development of agroecological systems using biopesticides represents a safe alternative that contributes to the reduction of agrochemical use and sustainable agriculture. Microalgae are able to biosynthesize a number of metabolites with potential biopesticidal action and can be considered potential biological agents for the control of harmful organisms to soils and plants. The present work aims to provide a critical perspective on the consequences of using synthetic pesticides, offering as an alternative the biopesticides obtained from microalgal biomass, which can be used together with the implementation of environmentally friendly agricultural systems.
- 29 February 2016
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 40 (6) , 1264-1269
Improvement of Thermal Stability of C-Phycocyanin by Nanofiber and Preservative Agents
- 29 February 2016
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 40 (6) , 1264-1269
Improvement of Thermal Stability of C-Phycocyanin by Nanofiber and Preservative Agents