Bruno Faccini Santoro
Research Subjects
Bruno Faccini Santoro has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Darci Odloak
Department of Chemical Engineering, University of São Paulo, São Paulo, Brazil
3 shared publications - Antonio Ferramosca
University of Bergamo
2 shared publications - Wilson Hideki Hirota
Laboratório de Engenharia e Controle Ambiental (LENCA), Departamento de Engenharia Química, Instituto de Ciências Ambientais, Químicas e Farmacêuticas Universidade Federal de São Paulo (UNIFESP), Campus Diadema Diadema Brazil
2 shared publications Adriana Guglielmi Ranieri Miranda
Laboratório de Engenharia e Controle Ambiental (LENCA), Departamento de Engenharia Química, Instituto de Ciências Ambientais, Químicas e Farmacêuticas Universidade Federal de São Paulo (UNIFESP), Campus Diadema Diadema Brazil
1 shared publication- Agustina D' Jorge
Institute of Technological Development for the Chemical Industry (INTEC), CONICET-UNL, Santa Fe, Argentina
1 shared publication - Alejandro Anderson
Dipartimento di Ingegneria Industriale Università di Trento Trento Italy
1 shared publication
Latest Publications
- Open Access
- 8 June 2026
- Published by Wiley in The Canadian Journal of Chemical Engineering
Application of dynamic modelling and model‐based predictive control to enhance a cooling tower
Model predictive control (MPC) differs from traditional feedback control by making predictions within a time horizon, providing better control actions for the process. In this work, MPC technique was applied to a cooling tower, using ambient air flow rate as a manipulated variable and the water temperature at the tower outlet as a process variable. The novelty of this work was the proposal of a direct infinite‐horizon MPC (IHMPC) based on a linear time‐invariant approach, with a reduced computational burden. The performance of the IHMPC, in relation to conventional regulatory controllers (PID), was evaluated through simulations using a rigorous nonlinear model to represent the cooling tower dynamics. In comparison with PID, the IHMPC reduced the stabilization time by 45% without present oscillations and undershoot in the cooled water temperature, making it possible to reach the set‐point of 20°C after 96 min of operation where the maximum air flow was 3.17 × 10 6 m 3 h −1 .
- 8 June 2026
- Published by Wiley in The Canadian Journal of Chemical Engineering
Open AccessApplication of dynamic modelling and model‐based predictive control to enhance a cooling tower
Model predictive control (MPC) differs from traditional feedback control by making predictions within a time horizon, providing better control actions for the process. In this work, MPC technique was applied to a cooling tower, using ambient air flow rate as a manipulated variable and the water temperature at the tower outlet as a process variable. The novelty of this work was the proposal of a direct infinite‐horizon MPC (IHMPC) based on a linear time‐invariant approach, with a reduced computational burden. The performance of the IHMPC, in relation to conventional regulatory controllers (PID), was evaluated through simulations using a rigorous nonlinear model to represent the cooling tower dynamics. In comparison with PID, the IHMPC reduced the stabilization time by 45% without present oscillations and undershoot in the cooled water temperature, making it possible to reach the set‐point of 20°C after 96 min of operation where the maximum air flow was 3.17 × 10 6 m 3 h −1 .
- Open Access
- 1 January 2024
- Published by Universidade Estadual de Ponta Grossa (UEPG) in Revista Conexao UEPG
- Vol. 20 (1) , 1-18
ARTICULA TECNOLOGIAS - É POSSÍVEL A INSERÇÃO CURRICULAR DA EXTENSÃO EM EDUCAÇÃO EM CURSOS DE ENGENHARIA?
A transformação forçada para uma forma emergencial de ensino remoto em 2020 evidenciou a carência de conhecimentos básicos de informática por parte da população brasileira em geral. O curso Articula Tecnologias do Projeto Articula Cursinhos-Rede Articul@ções foi uma iniciativa de curricularização da extensão na Unidade Curricular Algoritmos e Programação Computacional, do curso de Engenharia Química da Universidade Federal de São Paulo. Os ganhos aos graduandos foram: (i) a experiência de atuar em um projeto que exige a comunicação com outros grupos de trabalho e com o público externo, (ii) resolução de conflitos e (iii) a responsabilidade social. A ação possibilitou a colaboração de docentes de diferentes áreas (Educação e Engenharia), a inserção curricular de projetos de educação existentes e a articulação da pesquisa com as práticas para uma universidade socialmente referenciada em práticas emancipatórias e conhecimento pluriversitário. Atualmente o curso segue apenas na modalidade MOOC/Massive Open On-line Course.
- 1 January 2024
- Published by Universidade Estadual de Ponta Grossa (UEPG) in Revista Conexao UEPG
- Vol. 20 (1) , 1-18
Open AccessARTICULA TECNOLOGIAS - É POSSÍVEL A INSERÇÃO CURRICULAR DA EXTENSÃO EM EDUCAÇÃO EM CURSOS DE ENGENHARIA?
A transformação forçada para uma forma emergencial de ensino remoto em 2020 evidenciou a carência de conhecimentos básicos de informática por parte da população brasileira em geral. O curso Articula Tecnologias do Projeto Articula Cursinhos-Rede Articul@ções foi uma iniciativa de curricularização da extensão na Unidade Curricular Algoritmos e Programação Computacional, do curso de Engenharia Química da Universidade Federal de São Paulo. Os ganhos aos graduandos foram: (i) a experiência de atuar em um projeto que exige a comunicação com outros grupos de trabalho e com o público externo, (ii) resolução de conflitos e (iii) a responsabilidade social. A ação possibilitou a colaboração de docentes de diferentes áreas (Educação e Engenharia), a inserção curricular de projetos de educação existentes e a articulação da pesquisa com as práticas para uma universidade socialmente referenciada em práticas emancipatórias e conhecimento pluriversitário. Atualmente o curso segue apenas na modalidade MOOC/Massive Open On-line Course.
- 1 June 2019
- Published by Elsevier in Computers & Chemical Engineering
- Vol. 125, 365-379
Nonlinear model predictive control of a climatization system using rigorous nonlinear model
- 1 June 2019
- Published by Elsevier in Computers & Chemical Engineering
- Vol. 125, 365-379
Nonlinear model predictive control of a climatization system using rigorous nonlinear model
- 11 April 2019
- Published by Wiley in Optimal Control Applications and Methods
- Vol. 41 (1) , 65-83
Stochastic model predictive control for tracking linear systems
Summary: This note presents a stochastic formulation of the model predictive control for tracking (MPCT), based on the results of the work of Lorenzen et al. The proposed controller ensures constraints satisfaction in probability, and maintains the main features of the MPCT, that are feasibility for any changing setpoints and enlarged domain of attraction, even larger than the one delivered by Lorenzen et al, thanks to the use of artificial references and relaxed terminal constraints. The asymptotic stability (in probability) of the minimal robust positively invariant set centered on the desired setpoint is guaranteed. Simulations on a DC‐DC converter show the benefits and the properties of the proposal.
- 11 April 2019
- Published by Wiley in Optimal Control Applications and Methods
- Vol. 41 (1) , 65-83
Stochastic model predictive control for tracking linear systems
Summary: This note presents a stochastic formulation of the model predictive control for tracking (MPCT), based on the results of the work of Lorenzen et al. The proposed controller ensures constraints satisfaction in probability, and maintains the main features of the MPCT, that are feasibility for any changing setpoints and enlarged domain of attraction, even larger than the one delivered by Lorenzen et al, thanks to the use of artificial references and relaxed terminal constraints. The asymptotic stability (in probability) of the minimal robust positively invariant set centered on the desired setpoint is guaranteed. Simulations on a DC‐DC converter show the benefits and the properties of the proposal.
- 1 January 2018
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 51 (2) , 43-48
Control of methyl oleate supercritical extraction using input shaping
- 1 January 2018
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 51 (2) , 43-48
Control of methyl oleate supercritical extraction using input shaping
- Open Access
- 1 July 2017
- Published by Editora Edgard Blucher, Ltda.
- Vol. 1 (4) , 5-10
CONTROLE DE PH EM TRATAMENTO DE EFLUENTES UTILIZANDO DIÓXIDO DE CARBONO
O pH é um dos principais parâmetros a controlar no tratamento de efluentes, pois efluentes básicos podem provocar severos danos a fauna e flora dos rios em q...
- 1 July 2017
- Published by Editora Edgard Blucher, Ltda.
- Vol. 1 (4) , 5-10
Open AccessCONTROLE DE PH EM TRATAMENTO DE EFLUENTES UTILIZANDO DIÓXIDO DE CARBONO
O pH é um dos principais parâmetros a controlar no tratamento de efluentes, pois efluentes básicos podem provocar severos danos a fauna e flora dos rios em q...
- 13 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 20, 468-473
Moving horizon estimation of lumped load and occupancy in smart buildings
Model-based control strategies are widely used to improve the energy efficiency of building systems but they require accurate dynamic building models. Information about disturbances such as lumped load and occupancy is necessary in order to cover the mismatch between the simulations and reality, which leads to determining correct energy predictions of the building. Rigorous models that are applied in simulators such as EnergyPlus and Trnsys are difficult to be calibrated due to the high number of parameters and computational effort. Reduced models along with online estimators may be applied to overcome this issue. In this work, moving horizon estimation (MHE) is implemented for estimating the lumped load and number of occupants of an office whose required heat load is supplied by a hydronic heating system. MHE performance shows that its online estimations can be used along with model predictive control to improve output predictions.
- 13 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 20, 468-473
Moving horizon estimation of lumped load and occupancy in smart buildings
Model-based control strategies are widely used to improve the energy efficiency of building systems but they require accurate dynamic building models. Information about disturbances such as lumped load and occupancy is necessary in order to cover the mismatch between the simulations and reality, which leads to determining correct energy predictions of the building. Rigorous models that are applied in simulators such as EnergyPlus and Trnsys are difficult to be calibrated due to the high number of parameters and computational effort. Reduced models along with online estimators may be applied to overcome this issue. In this work, moving horizon estimation (MHE) is implemented for estimating the lumped load and number of occupants of an office whose required heat load is supplied by a hydronic heating system. MHE performance shows that its online estimations can be used along with model predictive control to improve output predictions.
- 1 July 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 5370-5375
A zone control strategy for stochastic model predictive control
The objective of this work is to extend the zone control approach from model predictive control to its stochastic counterpart. The motivation behind this idea is that zones are a natural extension of the concept of fixed set-point for systems subject to persistent disturbances. Therefore, it is possible to keep the outputs in desired regions without excessive control actions. We consider linear systems subject to bounded additive noise and propose a zone control formulation that includes hard constraints on the inputs and soft constraints on the states. The performance of the proposed approach is compared to zone controller that ignores disturbances and the results show a significant reduction of control moves, which means that the stochastic controller represents an interesting alternative to reduce the cost associated with control actions and to enhance the useful life of actuators.
- 1 July 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 5370-5375
A zone control strategy for stochastic model predictive control
The objective of this work is to extend the zone control approach from model predictive control to its stochastic counterpart. The motivation behind this idea is that zones are a natural extension of the concept of fixed set-point for systems subject to persistent disturbances. Therefore, it is possible to keep the outputs in desired regions without excessive control actions. We consider linear systems subject to bounded additive noise and propose a zone control formulation that includes hard constraints on the inputs and soft constraints on the states. The performance of the proposed approach is compared to zone controller that ignores disturbances and the results show a significant reduction of control moves, which means that the stochastic controller represents an interesting alternative to reduce the cost associated with control actions and to enhance the useful life of actuators.
- 1 January 2016
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 49 (32) , 30-35
Optimal Control of a Climatization System Using Energy and Comfort Objectives**B.F.S. and F.D.R.C. acknowledge the financial support of CNPq -Brazil during this research.
- 1 January 2016
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 49 (32) , 30-35
Optimal Control of a Climatization System Using Energy and Comfort Objectives**B.F.S. and F.D.R.C. acknowledge the financial support of CNPq -Brazil during this research.
- 1 August 2013
- Published by Elsevier in Journal of Process Control
- Vol. 23 (7) , 917-932
Robust model predictive control of integrating time delay processes
- 1 August 2013
- Published by Elsevier in Journal of Process Control
- Vol. 23 (7) , 917-932
Robust model predictive control of integrating time delay processes