Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Muhittin Inan has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    National-Scale GIS-Based Visibility Analysis of Fire Lookout Towers and Identification of Surveillance Deficit Zones in Türkiye

    by Mehmet Altuğ Küçükosmanoğlu, Muhittin İnAn

    Fire lookout towers remain a critical component of early detection systems in Mediterranean countries. However, the effectiveness of tower networks is constrained by topographic visibility limitations, creating significant surveillance gaps in forested landscapes. This study presents a national-scale GIS-based visibility analysis of Türkiye's 548 forest fire lookout towers and identifies priority surveillance deficit zones by integrating historical fire records, forest stand characteristics, and road network accessibility.Viewshed analysis was conducted using a 30-metre resolution NASA SRTM digital elevation model under curved-earth parameters, with an observer height of 6 metres and a smoke detection height of 100 metres, consistent with operational standards defined in the General Directorate of Forestry's Communiqué No. 285. The resulting binary visibility surface was overlaid with three datasets: the 12 regional forest directorate boundaries, a national forest stand map comprising 3,998,699 polygons with species composition and structural attributes, and a georeferenced dataset of 30,883 wildfire incidents recorded between 2013 and 2023.Results indicate that the existing tower network provides visibility coverage over 47.6% of Türkiye's forested territory, leaving 52.4% as blind spots. Regional analysis reveals substantial disparities, ranging from near-complete coverage in the Aegean and Marmara regions (Kütahya 99.2%, Çanakkale 98.5%) to near-zero coverage in northeastern regions (Artvin 0.0%, Erzurum 0.1%). Species-level analysis shows that fire-prone pine species such as Pinus brutia (86.6%) and Pinus nigra (87.8%) are relatively well covered, whereas Picea orientalis (0.2%) and Pinus sylvestris (43.5%) stands fall predominantly within blind spots. Analysis of historical fire records reveals that 75.1% of all recorded fires occurred within visible zones, while 24.9% (n=7,618) originated in areas invisible to any tower.Optimized Hot Spot Analysis (Getis-Ord Gi*) applied to 5,356 wildfire incidents occurring in forested blind spots identified 251 statistically significant priority surveillance deficit zones. These zones are concentrated predominantly in Şanlıurfa (69 hotspots, 502 fires), Elazığ (46 hotspots, 381 fires), Adana, Trabzon, and Hatay. Road network accessibility analysis using OpenStreetMap data confirmed that 99.2% of identified hotspot zones are accessible via the existing road network, based on a connectivity threshold of 4,000 metres derived from the road-access pattern of the existing tower network.These findings reveal structural surveillance gaps in Türkiye's fire detection network, particularly in southeastern and eastern Anatolia and the Black Sea region. The study provides a data-driven framework for prioritising surveillance deficit zones and recommends evaluating complementary detection technologies such as unmanned aerial vehicles and automated camera systems for areas where conventional tower infrastructure is insufficient.

  • Examining the changes in the amounts of PM2.5, PM10 and CO2 in the environment in debarking operations

    by Tolga Öztürk, Ebru Bilici, Muhittin İnan, Batın Mehmet YER

    One of the most time-consuming stages in the production of coniferous trees is debarking the bark of the product. During debarking with a chainsaw apparatus, many air pollutants such as bark residues, dust, sawdust, fuel material, etc. are mixed into the environment. This situation reduces the air quality for the workers. This study aims to investigate the impact of the debarking process on worker health and environmental impacts in coastal pine plantations in Sarıyer region. The air pollution parameters PM2.5, PM10, CO2 and HCHO levels during the debarking process were measured using a Temtop M2000 air quality meter. The results showed that when comparing these values to standard air quality metrics, it's clear that the peak values of PM2.5, PM10, and CO2 (247 μg/m3, 411 μg/m3, and 2549 ppm) result in a "Very Unhealthy" environment. The average values for all three (83.91 μg/m3, 121.69 μg/m3, and 614.19 ppm) are classified as "Unhealthy" for PM2.5, and "Moderate" for PM10 and CO2. The study results emphasize that the log debarking process is associated with bark volume, CO2 release and PM2.5 levels. Therefore, it is vital that workers in harvesting use maximum protective equipment, especially respirators. There is also a need to raise awareness and provide training for forest workers on the use of protective equipment. These findings may contribute to the development of effective policies on the health of workers in wood production and environmental quality.


  • Open Access

    A GIS Based Quick Assessment Method of Flood Vulnerability: Susurluk Basin Case

    by Mustafa Aytekin, Yusuf Serengil, Muhittin İnan

    There are various methods available for evaluating flood risk in a basin, ranging from identifying high-risk areas to analyzing the frequency and magnitude of potential flooding events. Our approach utilizes readily available spatial data to discern vulnerable locations to flooding of varying levels. In particular, we analyzed factors such as land use, precipitation, elevation, drainage density, slope, soil, and topographic wetness index through the application of Analytical Hierarchy Process (AHP), a multi-criteria evaluation technique, in the Susurluk river basin of Turkey. Annual precipitation emerged as the most significant factor in our predictive model. With precipitation assigned a weight value of 36%, slope, land use type, elevation, and drainage density were weighted at 23%, 6%, 12%, and 11%, respectively. Our analysis revealed that 88.31% of the basin exhibited vulnerability to flooding, whereas only 0.83% demonstrated resilience. These findings can inform policymakers in their decision-making regarding land planning. As such, the importance of flood vulnerability assessments in identifying regions that require additional attention in implementing prevention measures and early warning systems was underscored by this study.


  • Open Access

    Türkiye’nin en büyük peyzaj işletmesinde 2015-2023 yılları arasında yaşanan iş kazalarının veri analizi

    by Muvaffak Osman Engur, Muhittin İnan

    Peyzaj ve bahçe çalışanlarının yüksek yaralanma ve hastalık oranlarına rağmen, Türkiye’de park-bahçe ve peyzaj işlerinde iş güvenliği ve kaza oranları hakkında sınırlı bilgi bulunmaktadır. Peyzaj uygulamalarında kullanılan makinelerin operatörleri ve çalışanlar, sektördeki hayati unsurlardır. Bu kişilerin sağlıkları ile refahları, iş kaliteleri ve verimlilikleri üzerinde önemli bir etkiye sahiptir. Bu çalışma, Türkiye’deki en büyük peyzaj işletmesi olan İstanbul Ağaç ve Peyzaj A.Ş.’de, 2015-2023 yılları arasında gerçekleşen iş kazalarının sıklığını, türünü ve kök nedenlerini analiz ederek peyzaj çalışanlarının güvenliğini artırmayı amaçlamaktadır. Çalışmada kullanılan farklı formatta veriler gerekli düzenlemeler sonrasında ArcGIS Insight programında analiz edilmiştir. Bahsedilen işletmede, 9 yıl boyunca toplam 1.140 iş kazası meydana gelmiş olup, bu da yıllık ortalama 127 kazaya karşılık gelmektedir. Bu dönemde 5 ölüm vakası yaşanmıştır. Kazaların yaklaşık yarısı (%48.5) yeşil alan operasyonlarında gerçekleşmiştir. Kazaların çoğu (%53.5) ise kayma-takılma-düşme, motorlu el aletleri kullanımı ve elle kaldırma-taşıma nedeniyle ortaya çıkmıştır. Yaralanma açısından en çok etkilenen bölgeler sırasıyla el (%25.2), ayak (%16.3) ve bacak (%14.5) olmuştur. Kazaların %89.9'u doğrudan işyeri alanlarında yaşanırken, geri kalan kazalar işe gidip gelme, iş alanları arasındaki geçiş güzergâhları ve ulaşım noktalarında meydana gelmiştir. Kazaların kök nedenleri arasında kişisel koruyucu donanım eksikliği, operatör hatası, uygun olmayan teknikler ve kötü vücut duruşları bulunmaktadır. Kişisel hatalardan kaynaklanan kazaları azaltmak amacıyla peyzaj çalışanlarına iş güvenliği eğitimleri verilmesi ve ergonomik farkındalığın artırılması önerilmektedir. Bu önlemler, kas hasarlarını (burkulma ve incinme gibi) önlemeye veya azaltmaya yardımcı olabilir.

  • Open Access

    Yuvacık Barajı Havzası’nda (Kocaeli, Türkiye) Schizophyllum commune Fr. (Agaricales: Schizophyllaceae)’nin çevresel ilişkilerinin analizi

    by Ersel Yılmaz, Sabiha Acer, Muhittin İnan, Ayhan Karakaya

    Beyaz çürüklük etmeni olarak da bilinen Schizophyllum commune Fr., odunun kimyasal bileşenlerinden lignin de dahil olmak üzere bitki biyokütlesinin ayrışmasında önemli bir rol oynamaktadır. Bu tür en yaygın makroskopik mantar türlerinden biri olup Antarktika hariç her kıtada bulunur. Bu çalışmada, Yuvacık Havzası ormanlarının 1 km²lik sayısal parsellerinden rastgele seçilmiş 30’unda S. commune ’nin var/yok verileri ile alandan elde edilen çevresel veriler ki-kare ve t- testleri ile faktör analizi kullanılarak analiz edilmiştir. S. commune yayılışının çevresel faktörlerle ilişkisini analiz etmek ve görselleştirmek için Sayısal Arazi Modelinden (SAM) türetilebilen coğrafi katmanlar kullanılmıştır. S. commune'nin bazidiokarpları iki parsel hariç tüm parsellerde geniş yapraklı ağaçların dallarında tespit edilmiştir. Bu tür 20 ℃ ve üzeri sıcaklıklarda, %60-70 bağıl nemde iyi gelişmektedir. Ayrıca, 800 metre ve daha yüksek rakımları ve %20 ve daha fazla eğimleri tercih etmektedir. Faktör analizi ve ki-kare testleri iklim faktörleri, habitat faktörleri ve topografik faktörler olmak üzere üç ana kategoriyi ortaya koymaktadır. Bu türün araştırma alanındaki yayılışında en etkili faktörün iklimsel faktörlerden olan sıcaklık olduğu tespit edilmiştir.


  • Open Access

    Karaçam (Pinus nigra Arnold.) Plantasyon Alanlarında Motorlu Testere İle Kesimde Zaman Tüketimi, Verimlilik ve Maliyet Analizi

    by Tolga Öztürk, Batın Mehmet Yer, Muhittin İnan

    Ülkemizde artan nüfus sayısına göre odun hammaddesi ihtiyacı da artış göstermektedir. Oluşan bu talep ve artış nedeniyle odun hammaddesinin kesim süreci verim, maliyet, iş güvenliği ve çevresel zararlar açısından önemli bir hal almıştır. Bu çalışmanın amacı, İstanbul Sarıyer bölgesinde yer alan karaçam (Pinus nigra Arnold.) plantasyonlarında Husqvarna 365 motorlu testere ile yapılan kesim, dal alma, ölçme ve boylama çalışmalarında zaman tüketimi, verimlilik ve maliyeti tespit etmektir. Bu amaçla motorlu testere ile yapılan çalışmalarda zaman etütleri yapılmıştır. Bu zaman etütleri sonucunda ortalama 12.62 m boyunda ve 21.41 cm göğüs yüksekliği çapına sahip karaçam meşcerelerinde kesme verimi 2.825 m3/sa olarak bulunmuştur. Zaman etütleri sonucunda bir ağacın ortalama kesim süreci 5.31dakika/sefer olarak belirlenmiştir. Bunun yanında, yapılan çalışmada motorlu testere ile kesim çalışmasının maliyeti 5.53 $/sa ve 1.96 $/m3 olarak belirlenmiştir. Ayrıca, motorlu testerenin yakıt tüketimi 1.85 lt/sa olarak hesaplanmıştır. Çalışmanın sonucunda, motorlu testere verimliliğinin ağaç çapı ve dal alma-boylama ile ilişkili olduğu bulunmuştur.


  • A simple approach on forest roads drainage structures planning using GIS: A case study of Şile-Turkey

    by Muhittin İnAn, Tolga Öztürk

    Forest roads provide access to forest resources for conducting several forestry activities such as production, protection, afforestation, management, recreation and firefighting. Both drainage structures and pavement should be completed for forest roads to serve safely and for a long time. This study aimed to determine both cross-sections and types of drainage structures for newly built forest roads, using Geographic Information System (GIS) techniques. ArcGIS Pro software was used for analysis in the study. The total length of the forest road used in the study area was 7920 m, where 31 drainage structures was planned to be built at stream crossings along the road route. Considering the cross-sections of drainage areas along the route, it has been decided to construct a total of 31 drainage structures, including 25 pipes, 5 culverts and 1 bridge. GIS technology produces accurate and fast results in terms of determining cross-sectional areas in drainage structures on forest roads. A simple GIS-based approach reduces the stabilization and drainage problems and construction and maintenance costs in forest road design compared to traditional land evaluation methods. Thanks to its capacity to process big data and simple hydrological empirical calculations, GIS has significant gains in terms of accuracy and time consumption and is included in the planning forest road designs.


  • Odun üretim çalışmalarından sonra meşcerede kalan ağaçlardaki zararların incelenmesi (Belgrad Ormanı örneği)

    by Tolga Öztürk, Muhittin İnAn

    Üretim sistemlerindeki gelişmeler, yaşanır çevre içerisinde çevresel zararları en aza indirgeyerek en uygun çözüm önerilerine ulaşmayı hedeflemektedir. Çalışma konusunun temelini odun üretim çalışmaları sonrasında sürütme şeridi etrafında kalan ağaçlar üzerinde meydana gelen zararlar oluşturmaktadır. Bu çalışma için toplanan veriler, İstanbul Orman Bölge Müdürlüğüne bağlı Bahçeköy Orman İşletme Müdürlüğü, Bentler Orman İşletme Şefliği ormanlık alanlarındaki 90 nolu bölmedeki üretim faaliyetleri esnasında elde edilmiştir. Meşcerede üretim çalışmaları sonrasında kalan ağaçlar üzerinde oluşan zararlar kabuk ve kambiyum yaralanması şeklindedir. Araştırma sonucunda, meşcerede sürütme zonundaki toplam 296 ağaçtan 52 tanesinde farklı boyutlarda zararlar tespit edilmiştir ve zarar oranı %17,6 olarak bulunmuştur. Bu zararların genellikle sürütme şeridi merkez kenarına paralel 3 m’lik zonda oluştuğu görülmektedir. Sürütme şeridi üzerinde gerçekleştirilen sürütme, taşıma ve yükleme gibi farklı üretim aşamalarından dolayı kabuk zararlarının yerden yüksekliği değişiklik göstermiştir. Ağaç üzerindeki kabuk zararlarının yerden 310 cm yüksekliğe kadar çıktığı görülmüştür. Sonuçlara göre; odun üretim çalışmalarında ağaçlar ve çevre üzerinde meydana gelen zararlardan kaçınılması mümkün olmamakla birlikte odun üretim çalışmalarında görev alan işçi ve operatörlerin konu hakkında bilgilendirilmesi ve gerekli eğitimlerin verilmesi durumunda üretim zararlarını minimize etmek mümkündür. Odun üretim çalışmalarında sürütme şeritlerinin planlaması yapılmalı ve uygun makine seçimine dikkat edilmelidir.


  • Open Access

    Estimations of Forest Stand Parameters in Open Forest Stand Using Point Cloud Data from Terrestrial Laser Scanning, Unmanned Aerial Vehicle and Aerial LiDAR Data

    by Adil Enis Arslan, Muhittin İnan, Mehmet Furkan Çeli̇k, Esra Erten

    Two of the very basic forestry parameters, the Breast Height Diameter (DBH) and Tree Height (TH) are very effective when characterizing forest stands and individual trees. The traditional measurement process of these parameters takes a lot of time and consumes human power. On the other hand, 3D Point Cloud (PC) quickly provides a very detailed view of forestry parameters, because of the development of computer processing power and digital storage in recent years. PC data sources for forestry applications include Airborne LiDAR Systems (ALS), Terrestrial Laser Scanning (TLS) and most recently the Unmanned Air Vehicle (UAV). In this study, the PC datasets from these sources were used to study the feasibility of the DBH and TH values of a d development stage (i.e. DBH > 52 cm in mature stage) oak stand. The DBH and TH estimates are compared with the onsite measurements, which are considered to be fundamental truths, to their performance due to overall error statistics, as well as the cost of calculation and the difficulties in data collection. The results show that the computer data obtained by TLS has the best average square error (0.22 cm for DBH and 0,051 m for TH) compared to other computer data. The size of Pearson correlation between TLS-based and on-site-based measurements has reached 0.97 and 0.99 for DBH, respectively.