Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Min Li has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Spectral imaging characteristics of a multilevel diffractive lens by low-cost nanofabrication

    by Xin Liu, Min Li, Jiang Bian, Junfeng Du, Bincheng Li, Bin Fan, Feng Du

    Multilevel diffractive lenses with a small F-number (F#≤10) and a high diffraction efficiency can shorten optical system length and improve system detection accuracy. The diffraction efficiency of the multilevel diffractive lens fabricated by the high-precision, low-cost nanofabrication method proposed in this paper reaches 90% of the maximum theoretical diffraction efficiency. Furthermore, the spectral imaging characteristics of the diffractive lens are theoretical analysis and experimental verification. The results show that the measured spectral resolution is 1.5 nm and the spatial resolution is 116 lp/mm, respectively, which are close to the theoretical analysis values.


  • Open Access

    Telescope Alignment Method Using a Modified Stochastic Parallel Gradient Descent Algorithm

    by Min Li, Xin Liu, Junbo Zhang, Hao Xian

    To satisfy the demands of high image quality and resolutions, telescope alignment is indispensable. In this paper, a wavefront sensorless method based on a modified stochastic parallel gradient descent algorithm (SPGD) called the adaptive moment estimation SPGD (Adam SPGD) algorithm is proposed. Simulations are carried out using a four-mirror telescope, whose aperture is 6 m and fields of view are Φ2°. Three misalignments are shown as examples. Positions of the secondary mirror and third mirror are employed to compensate aberrations. The results show that merit functions and energy distributions of corrected images match with the designed ones. The mean RMS of residual wavefront errors is smaller than λ/14 (λ = 0.5 μm), indicating that the misalignments are well compensated. The results verify the effectiveness of our method.


  • A Secondary Mirror Alignment Method for Segmented Telescopes Using a Wavefront Sensor-Less Method

    by Min Li, Xin Liu, Ang Zhang, Junbo Zhang, Hao Xian

    The precise secondary mirror alignment is a key factor to ensure the imaging quality of a segmented telescope with a high resolution demand. In this paper, a two-step alignment method using an improved stochastic parallel gradient descent (SPGD) algorithm called Nadam SPGD algorithm is proposed. Simulation results show that our method can distinguish aberrations caused by phase errors of the primary mirror and position errors of the secondary mirror precisely, and align the secondary mirror quickly and accurately. The improved SPGD algorithm can enhance the correction efficiency by more than two times compared with the traditional SPGD algorithm.


  • A hybrid pixel detector with 4D information for dynamic synchrotron radiation applications

    by W. Wei, J. Zhang, S. Cui, Z. Li, M. Li, Y. Wang, Z. Wang, X. Jiang, K. Zhu, P. Liu

    TETPIX is a hybrid pixel detector designed for dynamic synchrotron radiation applications. It is based on hit-driven readout scheme. 4D information of every incoming photon, including 2D position, timing, and energy, can be detected at the same time. The chip consists of a 64 × 32 pixel array with a pixel size of 150 μm × 150 μm. A module system is designed with a sensitive area of 2 cm × 2 cm, and tested at synchrotron radiation beamlines. The results show an energy resolution better than 16% over a range of 10–15 keV, and a capability of fine timing structure detection.

  • Open Access

    Membrane–Fresnel Diffractive Lenses with High-Optical Quality and High-Thermal Stability

    by Xin Liu, Min Li, Bincheng Li, Bin Fan

    The membrane–Fresnel diffractive lens (M-FDL) has great potential in the field of high-resolution and lightweight imaging in orbit. However, the M-FDL with high-optical quality and high-thermal stability cannot be fabricated to a standard by the existing processing methods. In this paper, we propose a method for fabricating an M-FDL composed of three steps: the improved repeated spin-coating of the polyimide (PI) membrane, the secondary mucosal method of silica-framed membrane mirror, and the high-precision fabrication of a multi-level microstructure on a flexible, ultrathin membrane substrate. The results show that the root mean square (RMS) of the wave-front error for M-FDL obtained by the above method is 1/28λ (F# = 8.7 at 632.8 nm) with an 80 mm clear aperture, the average diffraction efficiency is more than 70%, the silica-framed membrane mirror possesses approximately 40 times the overall thermal stability of the traditional metal-framed mirror, and the weight is less than 40 g. The measurement results indicate that the M-FDL has high-optical quality and high-thermal stability and can satisfy the imaging requirements.


  • Open Access

    A Novel Fabricating Method of Micro Lens-on-Lens Arrays with Two Focal Lengths

    by Xin Liu, Min Li, Jiang Bian, Junfeng Du, Bincheng Li, Bin Fan

    Micro lens-on-lens array (MLLA) is a novel 3D structure with unique optical properties that cannot be fabricated accurately and quickly by existing processing methods. In this paper, a new fabricating method of MLLAs with two focal lengths is proposed. By introducing the soft lithography technology, nano-imprint technology and mask alignment exposure technology, MLLAs with high precisions can be obtained. A MLLA is successfully fabricated with two focal lengths of 58 μm and 344 μm, and an experiment is carried out. The results show that the MLLA has excellent two-level focusing and imaging abilities. Furthermore, the fabricated profiles of the MLLA agree well with the designed profiles, and the morphology deviation of the MLLA is better than 2%, satisfying the application requirements. The results verify the feasibility and validity of the novel fabricating method. By adjusting mask patterns and processing parameters, MLLAs with both changeable sizes and focal lengths can be obtained.


  • Open Access

    Wide-Field Telescope Alignment Using the Model-Based Method Combined with the Stochastic Parallel Gradient Descent Algorithm

    by Min Li, Ang Zhang, Junbo Zhang, Hao Xian

    To acquire images with higher accuracy of wide-field telescopes, deformable mirrors with more than 100 actuators are used, making the telescope alignment more complex and time-consuming. Furthermore, the position of the obscuration caused by the secondary mirror in the experiment system is changed with the difference of fields of view, making the response matrix of the deformable mirror different in various fields of view. To solve this problem, transfer functions corresponding to different fields of view are calculated according to the wavefront edge check and boundary conditions. In this paper, a model-based method combined with the stochastic parallel gradient descent (SPGD) algorithm is used. The experiment results show that our method can correct the aberrations with a high accuracy in both on-axis and off-axis fields, indicating that the effective actuators are well chosen corresponding to different fields of view.


  • Testing of the stochastic parallel radient descent algorithm for the alignment of a two-mirror telescope

    by Min Li, Xin Liu, Ang Zhang, Hao Xian

    The precise alignment of a high-performance, wide-field telescope is a key factor to ensure its imaging quality. The sharpness function of far-field images combined with an optimization algorithm is one of the most commonly used telescope alignment methods because of its advantages of having a concise measurement system, a simple calculation process, and wide application fields. In this paper, a Cassegrain telescope with two mirrors is aligned by maximizing the sharpness function of far-field images using the stochastic parallel gradient descent algorithm. To verify the effects of this method, both numerical simulations and experiments are implemented. The misalignments are corrected only after a few iterations, indicating that the stochastic parallel gradient descent algorithm can align the telescope rapidly. What's more, wavefront errors are measured using a Shack-Hartmann wavefront sensor to confirm the accuracy. The results show that this method can align a telescope that is in a misaligned working state with large misalignment errors rapidly and accurately, and the image quality after correction is improved greatly. (C) 2020 Optical Society of America


  • Novel black phosphorus saturable absorber based all-fiber lasers generating cylindrical vector beam pulses

    by Huaqing Song, Rumao Tao, Shan Huang, Xi Feng, Min Li, Xuan Tang, Benjian Shen, Li Li, Jianjun Wang

    In this paper, we demonstrated an all fiber laser passively Q-switched by black phosphorus saturable absorber with cylindrical vector beam output. A piece of few-mode fiber Bragg grating was used as the mode-selective output coupler. The repetition rate of the pulse trains increased from 16kHz to 24.9kHz when the pump power tuned from 364mW to 460mW. The maximum pulse energy was 305.2nJ with the shortest pulse duration of 7.5μs under the pump power of 460mW.Both radial polarized and azimuthal polarized pulse output could be achieved by adjusting the polarization controllers. The purity of the cylindrical vector beam output was estimated to be over 95%.

  • Open Access

    Telescopes Alignment Using the Sharpness Function Method Based on Undersampled Images

    by Min Li, Xin Liu, Ang Zhang, Hao Xian

    In astronomy, the images are sometimes under-sampled. In the previous researches, image reconstructions have to be employed to recover the lost information from a set of under-sampled images to achieve a high resolution image using dithering or drizzle methods, which increase the complexity of alignment processes and make the real-time correction impossible. In this paper, the telescope is aligned by changing the positions of the secondary mirror using sharpness function method combined with the stochastic parallel gradient descent (SPGD) algorithm based on both well-sampled and under-sampled images without image reconstructions. To improve the accuracy and robustness of the alignment, a new metric called relative RMS error is proposed. Both numerical simulations and experiments are implemented, and the alignment precisions are measured by wavefront residual errors using Shack-Hartmann wavefront sensors. The results show that the correction processes can converge stably and quickly whether the images are well-sampled or under-sampled. In experiments, the average wavefront error is 0.0595 λ for under-sampled images and 0.0548 λ for well-sampled images after the telescope alignment, indicating that the misalignments are well compensated for both well-sampled and under-sampled images.