Eric Schreiber
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Eric Schreiber has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
- Ellen M. Matson
University of Rochester
13 shared publications - Amymarie K. Bartholomew
Department of Chemistry, Yale University, New Haven, Connecticut 06520, USA
7 shared publications - William W. Brennessel
University of Rochester
7 shared publications - Madison E. Logelin
Department of Chemistry, Yale University, New Haven, Connecticut 06520, USA
6 shared publications - Madeleine Y. Popofsky
Department of Chemistry, Yale University, New Haven, Connecticut 06520, USA
5 shared publications Aleksa Banki
2 shared publications
Latest Publications
- Open Access
- 15 October 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Crystal-to-crystal solar energy storage in a hydrogen bonded dianthracene lattice retrocyclized by heat or e-beam
Solid-state (SS) systems for molecular solar thermal (MOST) energy storage are desirable for their simplicity and higher energy storage density compared to solution-based MOST systems, but it is difficult to design systems that both achieve high conversion to the metastable photoproduct and undergo thermally-driven release of the stored heat without melting. Anthracene (An) photocycloaddition to dianthracene (diAn) can proceed to high conversion in the solid state, but few crystalline Ans are appropriately aligned for dimerization, and even fewer diAns thermally retrocyclize without melting. By combining 9-pyridyl anthracene and 9-anthracenecarboxylic acid, we form hydrogen-bonded (H-bonded) and π-stacked chains that undergo high-conversion single-crystal-to-single-crystal photocycloaddition under simulated sunlight. Disordered packing in the lattice produces a mixture of the pyridyl-carboxylate “heterodimer,” the pyridyl homodimer, and the carboxylic acid homodimer. Calorimetry reveals that the H-bonded diAn product has a large separation between its thermal retrocyclization and melting temperatures, allowing the material to be cycled in the solid state. The H-bonded diAn lattice is also shown to undergo crystal-to-crystal retrocyclization under e-beam exposure. This work presents an easily-assembled all-SS crystal-to-crystal cyclable MOST system and demonstrates that H-bonding can be leveraged to increase the gap between thermal retrocyclization and melting.
- 15 October 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessCrystal-to-crystal solar energy storage in a hydrogen bonded dianthracene lattice retrocyclized by heat or e-beam
Solid-state (SS) systems for molecular solar thermal (MOST) energy storage are desirable for their simplicity and higher energy storage density compared to solution-based MOST systems, but it is difficult to design systems that both achieve high conversion to the metastable photoproduct and undergo thermally-driven release of the stored heat without melting. Anthracene (An) photocycloaddition to dianthracene (diAn) can proceed to high conversion in the solid state, but few crystalline Ans are appropriately aligned for dimerization, and even fewer diAns thermally retrocyclize without melting. By combining 9-pyridyl anthracene and 9-anthracenecarboxylic acid, we form hydrogen-bonded (H-bonded) and π-stacked chains that undergo high-conversion single-crystal-to-single-crystal photocycloaddition under simulated sunlight. Disordered packing in the lattice produces a mixture of the pyridyl-carboxylate “heterodimer,” the pyridyl homodimer, and the carboxylic acid homodimer. Calorimetry reveals that the H-bonded diAn product has a large separation between its thermal retrocyclization and melting temperatures, allowing the material to be cycled in the solid state. The H-bonded diAn lattice is also shown to undergo crystal-to-crystal retrocyclization under e-beam exposure. This work presents an easily-assembled all-SS crystal-to-crystal cyclable MOST system and demonstrates that H-bonding can be leveraged to increase the gap between thermal retrocyclization and melting.
- Open Access
- 22 June 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Single-crystal-to-single-crystal solar energy storage by a hydrogen-bonded anthracene lattice
Solid-state (SS) systems for molecular solar thermal (MOST) energy storage are desirable for their simplicity and higher energy storage density compared to solution-based MOST systems, but it is diTicult to design systems that both achieve high conversion to the metastable photoproduct and undergo thermally-driven release of the stored heat without melting. Anthracene (An) photocycloaddition to dianthracene (diAn) can proceed to high conversion in the solid state, but few crystalline Ans are appropriately aligned for dimerization, and even fewer diAns thermally retrocyclize without melting. By combining 9-pyridyl anthracene and 9-anthracenecarboxylic acid, we form hydrogen-bonded and π-stacked chains that undergo high-conversion single-crystal-to-single-crystal photocycloaddition under simulated sunlight. Disordered packing in the lattice produces a mixture of the pyridyl-carboxylate “heterodimer,” the pyridyl homodimer, and the carboxylic acid homodimer. Calorimetry reveals that the crystalline photocycloaddition product has a large separation between its thermal retrocyclization and melting temperatures. As a result, the material can be cycled entirely in the solid state. This work both presents an easily-assembled all-SS crystal-to-crystal cyclable MOST system and demonstrates that hydrogen bonding can be leveraged to increase the temperature gap between retrocyclization and melting.
- 22 June 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessSingle-crystal-to-single-crystal solar energy storage by a hydrogen-bonded anthracene lattice
Solid-state (SS) systems for molecular solar thermal (MOST) energy storage are desirable for their simplicity and higher energy storage density compared to solution-based MOST systems, but it is diTicult to design systems that both achieve high conversion to the metastable photoproduct and undergo thermally-driven release of the stored heat without melting. Anthracene (An) photocycloaddition to dianthracene (diAn) can proceed to high conversion in the solid state, but few crystalline Ans are appropriately aligned for dimerization, and even fewer diAns thermally retrocyclize without melting. By combining 9-pyridyl anthracene and 9-anthracenecarboxylic acid, we form hydrogen-bonded and π-stacked chains that undergo high-conversion single-crystal-to-single-crystal photocycloaddition under simulated sunlight. Disordered packing in the lattice produces a mixture of the pyridyl-carboxylate “heterodimer,” the pyridyl homodimer, and the carboxylic acid homodimer. Calorimetry reveals that the crystalline photocycloaddition product has a large separation between its thermal retrocyclization and melting temperatures. As a result, the material can be cycled entirely in the solid state. This work both presents an easily-assembled all-SS crystal-to-crystal cyclable MOST system and demonstrates that hydrogen bonding can be leveraged to increase the temperature gap between retrocyclization and melting.
- 13 February 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (7) , 7941-7950
Photopatternable Thermochromism Enabled by an Anthracene Heterodimer Ligand
Shortwave ultraviolet light retrocyclizes anthracene dimers (dianthracenes) to their corresponding monomers in the solid state, changing their solubility, fluorescence, geometry, conjugation, covalency, and more. Dianthracenes are thus an ideal building block for intrinsically photopatternable functional materials with bespoke optical, electronic, and magnetic properties. Here we present a new strategy to prepare such materials based on a "heterodimer" of anthracene and 9,10-anthracenedicarboxylic acid that allows us to photopattern the thermochromic phase of a Cu MOF in a two-dimensional (2D)-to-2D transformation, i.e., without dimensional reduction. The thermochromic phase can also be accessed by thermal annealing, as the 2D-to-2D nature of the structural transformation prevents melting. Upon retrocyclization, the parent anthracene released from our heterodimer deintercalates from between the 2D sheets, resulting in a massive, highly anisotropic structural rearrangement and remarkable 44% mass loss without crystal destruction. Furthermore, we demonstrate that 4-substituents on the pyridine ligands can be used to tune the thermochromism, which is based on thermal population of the triplet excited state of a Cu paddlewheel dimer.
- 13 February 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (7) , 7941-7950
Photopatternable Thermochromism Enabled by an Anthracene Heterodimer Ligand
Shortwave ultraviolet light retrocyclizes anthracene dimers (dianthracenes) to their corresponding monomers in the solid state, changing their solubility, fluorescence, geometry, conjugation, covalency, and more. Dianthracenes are thus an ideal building block for intrinsically photopatternable functional materials with bespoke optical, electronic, and magnetic properties. Here we present a new strategy to prepare such materials based on a "heterodimer" of anthracene and 9,10-anthracenedicarboxylic acid that allows us to photopattern the thermochromic phase of a Cu MOF in a two-dimensional (2D)-to-2D transformation, i.e., without dimensional reduction. The thermochromic phase can also be accessed by thermal annealing, as the 2D-to-2D nature of the structural transformation prevents melting. Upon retrocyclization, the parent anthracene released from our heterodimer deintercalates from between the 2D sheets, resulting in a massive, highly anisotropic structural rearrangement and remarkable 44% mass loss without crystal destruction. Furthermore, we demonstrate that 4-substituents on the pyridine ligands can be used to tune the thermochromism, which is based on thermal population of the triplet excited state of a Cu paddlewheel dimer.
- Open Access
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
Crystal-to-crystal solar energy storage in a hydrogen bonded dianthracene lattice retrocyclized by heat or e-beam
A 1D H-bonded lattice of 9-anthracenecarboxylic acid and 9-pyridyl anthracene undergoes [4 + 4]-photocycloaddition in the solid-state. Thermal and e-beam-induced retrocyclization proceeds in a crystal-to-crystal fashion.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
Open AccessCrystal-to-crystal solar energy storage in a hydrogen bonded dianthracene lattice retrocyclized by heat or e-beam
A 1D H-bonded lattice of 9-anthracenecarboxylic acid and 9-pyridyl anthracene undergoes [4 + 4]-photocycloaddition in the solid-state. Thermal and e-beam-induced retrocyclization proceeds in a crystal-to-crystal fashion.
- 28 October 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (44) , 38544-38552
Unraveling Ligand-Driven Isomerism in Redox-Active Mixed-Ligand Polyoxometalates Using Ion Mobility Spectrometry
Redox-active metal-oxide clusters that combine atomic precision with tunable solubility and electronic structure are emerging as functional components for energy storage, catalysis, and quantum materials. Polyoxovanadate (POV)-alkoxides, in particular, offer a modular platform where ligand shell composition can be tailored without disrupting the core structure. However, structural characterization of mixed-ligand POV-alkoxides is hindered by the presence of compositional and isomeric heterogeneity. Here, we report the structural investigation of mixed-ligand Lindqvist-type POV-alkoxides using ion mobility-mass spectrometry (IM-MS) coupled with density functional theory (DFT) and collision cross section (CCS) simulations. We examine two series of clusters, [V6O7(OR1)12-x(OR2)x] (x = 0-8), with ligands of varying steric bulk: methoxy/ethoxy (MeO/EtO) and ethoxy/ethoxyethyl (EtO/EOE). While the MeO/EtO series shows a linear increase in CCS with ligand substitution, the EtO/EOE series exhibits a curved trend and broadened CCS distributions, indicating the formation of multiple low-energy isomers. DFT results reveal that this behavior arises from the preferential extension and clustering of bulky EOE ligands on one side of the core. Comparison of experimental and simulated CCS distributions further indicates that high-CCS isomers are not formed under solvothermal conditions. Instead, the as-synthesized solution contains isomers in which the bulky EOE ligands cluster on one side of the hexavanadate core. These findings demonstrate the power of gas-phase structural analysis to resolve subtle isomeric preferences in complex molecular assemblies and offer a framework for understanding ligand-directed assembly in redox-active metal-oxide clusters.
- 28 October 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (44) , 38544-38552
Unraveling Ligand-Driven Isomerism in Redox-Active Mixed-Ligand Polyoxometalates Using Ion Mobility Spectrometry
Redox-active metal-oxide clusters that combine atomic precision with tunable solubility and electronic structure are emerging as functional components for energy storage, catalysis, and quantum materials. Polyoxovanadate (POV)-alkoxides, in particular, offer a modular platform where ligand shell composition can be tailored without disrupting the core structure. However, structural characterization of mixed-ligand POV-alkoxides is hindered by the presence of compositional and isomeric heterogeneity. Here, we report the structural investigation of mixed-ligand Lindqvist-type POV-alkoxides using ion mobility-mass spectrometry (IM-MS) coupled with density functional theory (DFT) and collision cross section (CCS) simulations. We examine two series of clusters, [V6O7(OR1)12-x(OR2)x] (x = 0-8), with ligands of varying steric bulk: methoxy/ethoxy (MeO/EtO) and ethoxy/ethoxyethyl (EtO/EOE). While the MeO/EtO series shows a linear increase in CCS with ligand substitution, the EtO/EOE series exhibits a curved trend and broadened CCS distributions, indicating the formation of multiple low-energy isomers. DFT results reveal that this behavior arises from the preferential extension and clustering of bulky EOE ligands on one side of the core. Comparison of experimental and simulated CCS distributions further indicates that high-CCS isomers are not formed under solvothermal conditions. Instead, the as-synthesized solution contains isomers in which the bulky EOE ligands cluster on one side of the hexavanadate core. These findings demonstrate the power of gas-phase structural analysis to resolve subtle isomeric preferences in complex molecular assemblies and offer a framework for understanding ligand-directed assembly in redox-active metal-oxide clusters.
- Open Access
- 17 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Intrinsically Photopatternable Thermochromism of an Anthracene Heterodimer Framework
Shortwave ultraviolet light retrocyclizes anthracene dimers (dianthracenes) to their corresponding monomers in the solid state, changing their solubility, fluorescence, geometry, conjugation, covalency, and more. Dianthracenes are thus an ideal building block for intrinsically photopatternable functional materials with bespoke optical, electronic, and magnetic properties. Here we present a new strategy to prepare such materials based on a “heterodimer” of anthracene and 9,10- anthra-cenedicarboxylic acid that allows us to photopattern the thermochromic phase of a Cu MOF in a two-dimensional (2D)-to-2D transformation, i.e. without dimensional reduction. The thermochromic phase can also be accessed by thermal annealing, as the 2D-to-2D nature of the structural transformation prevents melting. Upon retrocyclization, the parent anthracene released from our heterodimer deintercalates from between the 2D sheets, resulting in a massive, highly anisotropic structural rearrangement and remarkable 44% mass loss without crystal destruction. Furthermore, we demonstrate that the 4-substituent on the pyridine ligands can be used to tune the thermochromism, which is based on thermal population of the triplet excited state of a Cu paddlewheel dimer.
- 17 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessIntrinsically Photopatternable Thermochromism of an Anthracene Heterodimer Framework
Shortwave ultraviolet light retrocyclizes anthracene dimers (dianthracenes) to their corresponding monomers in the solid state, changing their solubility, fluorescence, geometry, conjugation, covalency, and more. Dianthracenes are thus an ideal building block for intrinsically photopatternable functional materials with bespoke optical, electronic, and magnetic properties. Here we present a new strategy to prepare such materials based on a “heterodimer” of anthracene and 9,10- anthra-cenedicarboxylic acid that allows us to photopattern the thermochromic phase of a Cu MOF in a two-dimensional (2D)-to-2D transformation, i.e. without dimensional reduction. The thermochromic phase can also be accessed by thermal annealing, as the 2D-to-2D nature of the structural transformation prevents melting. Upon retrocyclization, the parent anthracene released from our heterodimer deintercalates from between the 2D sheets, resulting in a massive, highly anisotropic structural rearrangement and remarkable 44% mass loss without crystal destruction. Furthermore, we demonstrate that the 4-substituent on the pyridine ligands can be used to tune the thermochromism, which is based on thermal population of the triplet excited state of a Cu paddlewheel dimer.
- Open Access
- 20 August 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 15 (37) , 15198-15204
Exfoliation of a metal–organic framework enabled by post-synthetic cleavage of a dipyridyl dianthracene ligand
A three-dimensional MOF featuring an anthracene dimer ligand analogous to 4,4′-bipyridine undergoes selective dimensional reduction into a two-dimensional framework that can be mechanically exfoliated.
- 20 August 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 15 (37) , 15198-15204
Open AccessExfoliation of a metal–organic framework enabled by post-synthetic cleavage of a dipyridyl dianthracene ligand
A three-dimensional MOF featuring an anthracene dimer ligand analogous to 4,4′-bipyridine undergoes selective dimensional reduction into a two-dimensional framework that can be mechanically exfoliated.
- Open Access
- 18 July 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Exfoliation of a Metal-Organic Framework Enabled by Post-Synthetic Cleavage of a Dipyridyl Dianthracene Ligand
The synthetic tunability and porosity of two-dimensional (2D) metal-organic frameworks (MOFs) renders them a promising class of materials for ultrathin and nanoscale applications. Conductive 2D MOFs are of particular interest for applications in nanoelectronics, chemo-sensing, and memory storage. However, the lack of covalency along the stacking axis typically leads to poor crystallinity in 2D MOFs, limiting structural analysis and precluding exfoliation. One strategy to improve crystal growth is to increase order along the stacking direction. Here, we demonstrate the synthesis of mechanically exfoliatable macroscopic crystals of a 2D zinc MOF by selective dimensional reduction of a 3D zinc MOF bearing a dianthracene (diAn) ligand along the stacking axis. The diAn ligand, a thermally cleavable analogue of 4,4’ bipyridine, is synthesized by the direct functionalization of dianthraldehyde in a novel “dianthracene-first” approach. This work presents a new strategy for the growth of macroscopic crystals of 2D materials while introducing the functionalization of dianthraldehyde as a means to access new stimuli-responsive ligands.
- 18 July 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessExfoliation of a Metal-Organic Framework Enabled by Post-Synthetic Cleavage of a Dipyridyl Dianthracene Ligand
The synthetic tunability and porosity of two-dimensional (2D) metal-organic frameworks (MOFs) renders them a promising class of materials for ultrathin and nanoscale applications. Conductive 2D MOFs are of particular interest for applications in nanoelectronics, chemo-sensing, and memory storage. However, the lack of covalency along the stacking axis typically leads to poor crystallinity in 2D MOFs, limiting structural analysis and precluding exfoliation. One strategy to improve crystal growth is to increase order along the stacking direction. Here, we demonstrate the synthesis of mechanically exfoliatable macroscopic crystals of a 2D zinc MOF by selective dimensional reduction of a 3D zinc MOF bearing a dianthracene (diAn) ligand along the stacking axis. The diAn ligand, a thermally cleavable analogue of 4,4’ bipyridine, is synthesized by the direct functionalization of dianthraldehyde in a novel “dianthracene-first” approach. This work presents a new strategy for the growth of macroscopic crystals of 2D materials while introducing the functionalization of dianthraldehyde as a means to access new stimuli-responsive ligands.
- 30 April 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (43) , 5610-5613
O2 reduction via proton-coupled electron transfer by a V(iii) aquo on a polyoxovanadate-alkoxide cluster
We report the reduction of O2 to H2O2via concerted proton–electron transfer from the terminal V(iii)–OH2 moiety of a reduced polyoxovanadate-alkoxide cluster.
- 30 April 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (43) , 5610-5613
O2 reduction via proton-coupled electron transfer by a V(iii) aquo on a polyoxovanadate-alkoxide cluster
We report the reduction of O2 to H2O2via concerted proton–electron transfer from the terminal V(iii)–OH2 moiety of a reduced polyoxovanadate-alkoxide cluster.
- Open Access
- 19 January 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (4) , 2364-2369
Heterometal Dopant Changes the Mechanism of Proton-Coupled Electron Transfer at the Polyoxovanadate-Alkoxide Surface
The transfer of two H-atom equivalents to the titanium-doped polyoxovanadate-alkoxide, [TiV5O6(OCH3)13], results in the formation of a V(III)-OH2 site at the surface of the assembly. Incorporation of the group (IV) metal ion results in a weakening of the O-H bonds of [TiV5O5(OH2)(OCH3)13] in comparison to its homometallic congener, [V6O6(OH2)(OCH3)12], resembling more closely the thermodynamics reported for the one-electron reduced derivative, [V6O6(OH2)(OCH3)12]1-. An analysis of early time points of the reaction of [TiV5O6(OCH3)13] and 5,10-dihydrophenazine reveals the formation of an oxidized substrate, suggesting that proton-coupled electron transfer proceeds via initial electron transfer from substrate to cluster prior to proton transfer. These results demonstrate the profound influence of heterometal dopants on the mechanism of PCET with respect to the surface of the assembly.
- 19 January 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (4) , 2364-2369
Open AccessHeterometal Dopant Changes the Mechanism of Proton-Coupled Electron Transfer at the Polyoxovanadate-Alkoxide Surface
The transfer of two H-atom equivalents to the titanium-doped polyoxovanadate-alkoxide, [TiV5O6(OCH3)13], results in the formation of a V(III)-OH2 site at the surface of the assembly. Incorporation of the group (IV) metal ion results in a weakening of the O-H bonds of [TiV5O5(OH2)(OCH3)13] in comparison to its homometallic congener, [V6O6(OH2)(OCH3)12], resembling more closely the thermodynamics reported for the one-electron reduced derivative, [V6O6(OH2)(OCH3)12]1-. An analysis of early time points of the reaction of [TiV5O6(OCH3)13] and 5,10-dihydrophenazine reveals the formation of an oxidized substrate, suggesting that proton-coupled electron transfer proceeds via initial electron transfer from substrate to cluster prior to proton transfer. These results demonstrate the profound influence of heterometal dopants on the mechanism of PCET with respect to the surface of the assembly.