Dionatan Ketzer Krysczun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dionatan Ketzer Krysczun has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Alessandro Dal'Col Lúcio
Universidade Federal de Santa Maria
7 shared publications - Maria Inês Diel
Universidade Federal de Santa Maria - UFSM
5 shared publications - Bruno Giacomini Sari
Universidade Federal de Santa Maria, Brazil
4 shared publications - Denise Schmidt
Departamento de Agronomia e Ciências Ambientais, Universidade Federal de Santa Maria (UFSM), Frederico Westphalen 98400-000, RS, Brazil
3 shared publications - Marcos Vinícius Marques Pinheiro
Campus Frederico Westphalen (URI-FW), Universidade Regional Integrada do Alto Uruguai e das Missões, Frederico Westphalen 98400-000, RS, Brazil
3 shared publications - Tiago Olivoto
Universidade Federal de Santa Catarina
3 shared publications
Latest Publications
- Open Access
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Bragantia
- Vol. 81
Onion culture: experimental techniques for carrying out high precision experiments
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Bragantia
- Vol. 81
Open AccessOnion culture: experimental techniques for carrying out high precision experiments
- 23 December 2020
- Published by Wiley in Agronomy Journal
- Vol. 113 (2) , 1394-1406
Experimental plan for tests with pea
Correct experimental planning is important to obtain more reliable data with high experimental precision. In this way, the results obtained and the technical recommendations generated are more reliable and representative. Thus, the objective of this work is to estimate the plot and sample sizes and the number of repetitions for the variables (a) number of pods per plant and (b) mass of pods per plant for pea (Pisum sativum L.) cultivation. Uniformity tests were carried in the years 2016, 2017, and 2018 in the experimental area of the Crop Science Department at Federal University of Santa Maria. The cultivar used was Pea Grain 40, which has an indeterminate growth habit, with a cycle of 75–90 d and a cylindrical pod. The plot size for evaluating the number of pods per plant and the mass of pods per plant for pea cultivation is eight and nine plants, respectively. The sample size for evaluating the number of pods per plant and the mass of pods per plant is eight plants in the direction of the line with a half‐width of the 20% confidence interval of the mean. For the variables number of pods per plant and pod mass per pea plant, 10 and 12 repetitions are required, respectively, to evaluate up to 20 treatments in a randomized block design and in the incomplete blocks design with up to 100 treatments for significant differences of 35% between treatment averages.
- 23 December 2020
- Published by Wiley in Agronomy Journal
- Vol. 113 (2) , 1394-1406
Experimental plan for tests with pea
Correct experimental planning is important to obtain more reliable data with high experimental precision. In this way, the results obtained and the technical recommendations generated are more reliable and representative. Thus, the objective of this work is to estimate the plot and sample sizes and the number of repetitions for the variables (a) number of pods per plant and (b) mass of pods per plant for pea (Pisum sativum L.) cultivation. Uniformity tests were carried in the years 2016, 2017, and 2018 in the experimental area of the Crop Science Department at Federal University of Santa Maria. The cultivar used was Pea Grain 40, which has an indeterminate growth habit, with a cycle of 75–90 d and a cylindrical pod. The plot size for evaluating the number of pods per plant and the mass of pods per plant for pea cultivation is eight and nine plants, respectively. The sample size for evaluating the number of pods per plant and the mass of pods per plant is eight plants in the direction of the line with a half‐width of the 20% confidence interval of the mean. For the variables number of pods per plant and pod mass per pea plant, 10 and 12 repetitions are required, respectively, to evaluate up to 20 treatments in a randomized block design and in the incomplete blocks design with up to 100 treatments for significant differences of 35% between treatment averages.
- Open Access
- 27 May 2020
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Agronomy
- Vol. 42, e43357
Repeatability coefficients and number of measurements for evaluating traits in strawberry
The objective of this study was to estimate the coefficient of repeatability and the number of measurements required for production and quality variables in a strawberry crop. An experiment was conducted with two strawberry cultivars from two origins grown in four substrate mixtures, totaling 16 treatments, evaluated in a randomized block design with four replications. Mass (MF) and number (NF) of fruits per plant were evaluated as measures of production, and total soluble solids (SST), titratable acidity (AT) and firmness (FIR) of fruits during the crop cycle were evaluated as measures of quality. Subsequently, the repeatability coefficient was estimated by the following methods: analysis of variance (ANOVA), principal component analysis using a correlation matrix (PCcor), principal component analysis using a variance-covariance matrix (PCcov) and structural analysis (SA). The number of measurements was adjusted for each studied variable based on determination coefficients of 0.80, 0.85, 0.90, and 0.95. The repeatability coefficients ranged from low to medium. The ANOVA method gave the lowest r values, while the PCcov method presented the highest values of r. When using the PCcov method, 3.6, 2.9, 6.2, 3.2, and 3.8 measurements were needed to reach 80% confidence for the variables MF, NF, SST, AT, and FIR, respectively, and this increased to 7.3, 14.0, 29.6, 15.4, and 18.1 for 95% confidence in the results for MF, NF, SST, AT, and FIR, respectively.
- 27 May 2020
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Agronomy
- Vol. 42, e43357
Open AccessRepeatability coefficients and number of measurements for evaluating traits in strawberry
The objective of this study was to estimate the coefficient of repeatability and the number of measurements required for production and quality variables in a strawberry crop. An experiment was conducted with two strawberry cultivars from two origins grown in four substrate mixtures, totaling 16 treatments, evaluated in a randomized block design with four replications. Mass (MF) and number (NF) of fruits per plant were evaluated as measures of production, and total soluble solids (SST), titratable acidity (AT) and firmness (FIR) of fruits during the crop cycle were evaluated as measures of quality. Subsequently, the repeatability coefficient was estimated by the following methods: analysis of variance (ANOVA), principal component analysis using a correlation matrix (PCcor), principal component analysis using a variance-covariance matrix (PCcov) and structural analysis (SA). The number of measurements was adjusted for each studied variable based on determination coefficients of 0.80, 0.85, 0.90, and 0.95. The repeatability coefficients ranged from low to medium. The ANOVA method gave the lowest r values, while the PCcov method presented the highest values of r. When using the PCcov method, 3.6, 2.9, 6.2, 3.2, and 3.8 measurements were needed to reach 80% confidence for the variables MF, NF, SST, AT, and FIR, respectively, and this increased to 7.3, 14.0, 29.6, 15.4, and 18.1 for 95% confidence in the results for MF, NF, SST, AT, and FIR, respectively.
- Open Access
- 1 April 2020
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 38 (2) , 112-116
Experimental planning for conducting experiments with cucumber
In order to be considered highly reliable (showing very accurate results), an experiment needs to be very well planned. Defining the experimental plot size and number of replicates is fundamental to control the experimental error at the beginning of the experiment. The aim of this study was to estimate the plot size and the number of replicates sufficient to perform experiments with Cucumis sativus. A uniformity trial was installed in the first week of January 2017. The spacing used was 0.3 m between plants and 1 m between rows, resulting in 12 plants in each of the 12 cultivation rows and each basic experimental unit was composed of one plant. The variables observed in 18 harvests were average fruit mass (MMF, in g), average fruit length (CMF, in cm) and average fruit diameter (DMF, in cm). The harvests were analyzed individually and grouped to reduce experimental variability. The number of replicates and the plot size were estimated using the method of maximum curvature of the coefficient of variation. The plot size and the number of replicates were influenced by the variability in the rows and between the harvests. We recommend plots consisting of four plants per cultivation row with six replicates for the minimum significant difference by Tukey’s test, expressed in 25% the means percentage.
- 1 April 2020
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 38 (2) , 112-116
Open AccessExperimental planning for conducting experiments with cucumber
In order to be considered highly reliable (showing very accurate results), an experiment needs to be very well planned. Defining the experimental plot size and number of replicates is fundamental to control the experimental error at the beginning of the experiment. The aim of this study was to estimate the plot size and the number of replicates sufficient to perform experiments with Cucumis sativus. A uniformity trial was installed in the first week of January 2017. The spacing used was 0.3 m between plants and 1 m between rows, resulting in 12 plants in each of the 12 cultivation rows and each basic experimental unit was composed of one plant. The variables observed in 18 harvests were average fruit mass (MMF, in g), average fruit length (CMF, in cm) and average fruit diameter (DMF, in cm). The harvests were analyzed individually and grouped to reduce experimental variability. The number of replicates and the plot size were estimated using the method of maximum curvature of the coefficient of variation. The plot size and the number of replicates were influenced by the variability in the rows and between the harvests. We recommend plots consisting of four plants per cultivation row with six replicates for the minimum significant difference by Tukey’s test, expressed in 25% the means percentage.
- Open Access
- 1 January 2019
- Published by Universidad Pedagogica y Tecnologica de Colombia in Revista Colombiana de Ciencias Hortícolas
- Vol. 13 (1) , e7967
Relationship between morpho-agronomic traits in tomato hybrids
The objective of this study was to identify and estimate the relationships between production component variables and fruit yields in tomatoes. This experiment was conducted in a randomized block design with a 2×3×3 factorial arrangement, with two tomato hybrids (Netuno and San Vito), three doses of boron (H3BO3 - 0, 2, 4 g pit1) and three calcium floral applications (no application; application every 7 days; and application every 14 days), totaling 18 treatments with four replications and 20 plants per plot. Pearson correlation coefficients were estimated between the measured variables and, after that, those with greater significance were selected for productivity with the Stepwise method and verification of multicollinearity using the number of condition and inflation factor of the variance. The correlations of the selected variables were decomposed into direct and indirect effects on fruit productivity with path analysis. There was a strong correlation between the variables, excluding the variables height, diameter and average mass of the fruits. Thus, there were cause and effect relationships between the independent variable total mass of the fruits and the principal variable total fruit yield. The variables diameter and total number of fruits did not contribute to an increased tomato production.
- 1 January 2019
- Published by Universidad Pedagogica y Tecnologica de Colombia in Revista Colombiana de Ciencias Hortícolas
- Vol. 13 (1) , e7967
Open AccessRelationship between morpho-agronomic traits in tomato hybrids
The objective of this study was to identify and estimate the relationships between production component variables and fruit yields in tomatoes. This experiment was conducted in a randomized block design with a 2×3×3 factorial arrangement, with two tomato hybrids (Netuno and San Vito), three doses of boron (H3BO3 - 0, 2, 4 g pit1) and three calcium floral applications (no application; application every 7 days; and application every 14 days), totaling 18 treatments with four replications and 20 plants per plot. Pearson correlation coefficients were estimated between the measured variables and, after that, those with greater significance were selected for productivity with the Stepwise method and verification of multicollinearity using the number of condition and inflation factor of the variance. The correlations of the selected variables were decomposed into direct and indirect effects on fruit productivity with path analysis. There was a strong correlation between the variables, excluding the variables height, diameter and average mass of the fruits. Thus, there were cause and effect relationships between the independent variable total mass of the fruits and the principal variable total fruit yield. The variables diameter and total number of fruits did not contribute to an increased tomato production.
- 22 May 2018
- Published by Taylor & Francis in The Journal of Horticultural Science and Biotechnology
- Vol. 94 (2) , 259-273
Nonlinear regression for description of strawberry (Fragaria x ananassa) production
The aim of this study was to select growth models to describe strawberry (Fragaria x ananassa)fruit production. To do this, data on 16 treatments (combination of 2 cultivars [Albion and Camarosa], 2 origins [National and Imported], and 4 organic substrates mixed [70% crushed sugar cane residue + 30% organic compost, 70% crushed sugar cane residue + 30% commercial substrate, 70% burnt rice husk + 30% organic compost, and 70% burnt rice husk + 30% commercial substrate]) conducted in a Randomized Complete Block Design (RCBD) with 4 replicates were used. Different parameterizations of the Logistic, Gompertz, and von Bertalanffy models were adjusted for number and weight of fruits per plant (g) accumulated in multiple harvests. The model adjustment and parameter estimation were obtained by ordinary least squares, using a Gauss Newton algorithm. The selection of the best model was chosen by intrinsic and parametric nonlinearity. Among the adjusted nonlinear models, the best adjustment for both variables was achieved by the parameterization 2 of the Logistic model and parameterization 1 of the Gompertz model, because they had lower results with less parametric and intrinsic nonlinearity. However, care should be taken when using the Gompertz model because it tends to overestimate the production estimate and may cause misunderstandings in interpretation.
- 22 May 2018
- Published by Taylor & Francis in The Journal of Horticultural Science and Biotechnology
- Vol. 94 (2) , 259-273
Nonlinear regression for description of strawberry (Fragaria x ananassa) production
The aim of this study was to select growth models to describe strawberry (Fragaria x ananassa)fruit production. To do this, data on 16 treatments (combination of 2 cultivars [Albion and Camarosa], 2 origins [National and Imported], and 4 organic substrates mixed [70% crushed sugar cane residue + 30% organic compost, 70% crushed sugar cane residue + 30% commercial substrate, 70% burnt rice husk + 30% organic compost, and 70% burnt rice husk + 30% commercial substrate]) conducted in a Randomized Complete Block Design (RCBD) with 4 replicates were used. Different parameterizations of the Logistic, Gompertz, and von Bertalanffy models were adjusted for number and weight of fruits per plant (g) accumulated in multiple harvests. The model adjustment and parameter estimation were obtained by ordinary least squares, using a Gauss Newton algorithm. The selection of the best model was chosen by intrinsic and parametric nonlinearity. Among the adjusted nonlinear models, the best adjustment for both variables was achieved by the parameterization 2 of the Logistic model and parameterization 1 of the Gompertz model, because they had lower results with less parametric and intrinsic nonlinearity. However, care should be taken when using the Gompertz model because it tends to overestimate the production estimate and may cause misunderstandings in interpretation.
- Open Access
- 1 December 2017
- Published by FapUNIFESP (SciELO) in Revista Brasileira de Engenharia Agrícola E Ambiental
- Vol. 21 (12) , 828-833
Growth regulator on oat yield indicators
Growth regulator in oat can reduce lodging with effects on yield indicators. The objective of the study is to define the optimum dose of growth regulator to reduce lodging in oats under different conditions of nitrogen (N) fertilization (reduced, high and very high) and the effects on yield indicators in the succession systems. In each succession system (soybean/oats and corn/oats), two experiments were conducted, one to quantify biomass yield and the other to estimate grain yield and lodging. In the four experiments, the design was randomized blocks with four replicates in 3 x 4 factorial scheme, for N-fertilizer doses (30, 90 and 150 kg ha-1) and growth regulator doses (0, 200, 400 and 600 mL ha-1), respectively. Growth regulator reduces lodging in oat plants, with the ideal doses of 500 mL ha-1 in the soybean/oat system and 400 mL ha-1 in the corn/oat system, regardless of the reduced, high and very high N doses. There is a linear reduction of biological and straw yields, and a quadratic trend in the expression of grain yield and harvest index as a function of the growth regulator doses, regardless of succession systems (soybean/oats and corn/oats).
- 1 December 2017
- Published by FapUNIFESP (SciELO) in Revista Brasileira de Engenharia Agrícola E Ambiental
- Vol. 21 (12) , 828-833
Open AccessGrowth regulator on oat yield indicators
Growth regulator in oat can reduce lodging with effects on yield indicators. The objective of the study is to define the optimum dose of growth regulator to reduce lodging in oats under different conditions of nitrogen (N) fertilization (reduced, high and very high) and the effects on yield indicators in the succession systems. In each succession system (soybean/oats and corn/oats), two experiments were conducted, one to quantify biomass yield and the other to estimate grain yield and lodging. In the four experiments, the design was randomized blocks with four replicates in 3 x 4 factorial scheme, for N-fertilizer doses (30, 90 and 150 kg ha-1) and growth regulator doses (0, 200, 400 and 600 mL ha-1), respectively. Growth regulator reduces lodging in oat plants, with the ideal doses of 500 mL ha-1 in the soybean/oat system and 400 mL ha-1 in the corn/oat system, regardless of the reduced, high and very high N doses. There is a linear reduction of biological and straw yields, and a quadratic trend in the expression of grain yield and harvest index as a function of the growth regulator doses, regardless of succession systems (soybean/oats and corn/oats).