Tao Liang
Tao Liang has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
Jincan Chen
3 shared publicationsGuozhen Su
2 shared publications- Jincan Chen
Xiamen University
2 shared publications Juan-Fang Han
Chinese Academy of Sciences
2 shared publications- Shanhe Su
Xiamen University
2 shared publications Wen-Shan Duan
Chinese Academy of Sciences
2 shared publications
Latest Publications
- Open Access
- 23 May 2026
- Published by Elsevier in SSRN Electronic Journal
Multi-Parameter Co-Tuning of Polariton Coupling for Giant Enhancement of Near-Field Radiative Heat Transfer in Asymmetric hBN/SiC Heterostructures
When the emitter and receiver are made of dissimilar materials with asymmetric configurations, mismatches in their intrinsic polaritonic response modes severely limit near-field radiative heat transfer (NFRHT). Previous efforts have largely focused on symmetric structures or single-parameter modulation, leaving effective strategies to bridge mode mismatch between two distinct polaritonic media—such as hexagonal boron nitride (hBN) and silicon carbide (SiC)—currently unclear. Here, we propose an asymmetric hBN/graphene – porous SiC/graphene heterostructure, where monolayer graphene films on both terminals serve as dynamically tunable bridges. By simultaneously tuning the displacement frequency of hBN ( Ω ) and the porosity of SiC ( f ), we achieve frequency band overlap among three polariton species: surface plasmon polaritons (SPPs) from graphene, surface phonon polaritons (SPhPs) and hyperbolic phonon polaritons (HPhPs) from porous SiC, and HPhPs from hBN.Theoretical calculations based on fluctuational electrodynamics show that under optimal conditions (f=0.5, Ω=1×10^14 rad s-1, graphene chemical potential μ=0.1 eV , vacuum gap d=10 nm), the heat flux reaches 3.69×105 W m-2—two to three orders of magnitude higher than the unregulated asymmetric hBN-SiC structure f=0, Ω=0). We further elucidate the physical mechanisms governing multi-polariton coupling and the non-monotonic dependence of heat flux on Ω, f, and μ. This work establishes a multi-parameter co-tuning framework to overcome mode mismatch in heterogeneous near-field systems, providing new pathways for nanoscale thermal management and energy conversion.
- 23 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMulti-Parameter Co-Tuning of Polariton Coupling for Giant Enhancement of Near-Field Radiative Heat Transfer in Asymmetric hBN/SiC Heterostructures
When the emitter and receiver are made of dissimilar materials with asymmetric configurations, mismatches in their intrinsic polaritonic response modes severely limit near-field radiative heat transfer (NFRHT). Previous efforts have largely focused on symmetric structures or single-parameter modulation, leaving effective strategies to bridge mode mismatch between two distinct polaritonic media—such as hexagonal boron nitride (hBN) and silicon carbide (SiC)—currently unclear. Here, we propose an asymmetric hBN/graphene – porous SiC/graphene heterostructure, where monolayer graphene films on both terminals serve as dynamically tunable bridges. By simultaneously tuning the displacement frequency of hBN ( Ω ) and the porosity of SiC ( f ), we achieve frequency band overlap among three polariton species: surface plasmon polaritons (SPPs) from graphene, surface phonon polaritons (SPhPs) and hyperbolic phonon polaritons (HPhPs) from porous SiC, and HPhPs from hBN.Theoretical calculations based on fluctuational electrodynamics show that under optimal conditions (f=0.5, Ω=1×10^14 rad s-1, graphene chemical potential μ=0.1 eV , vacuum gap d=10 nm), the heat flux reaches 3.69×105 W m-2—two to three orders of magnitude higher than the unregulated asymmetric hBN-SiC structure f=0, Ω=0). We further elucidate the physical mechanisms governing multi-polariton coupling and the non-monotonic dependence of heat flux on Ω, f, and μ. This work establishes a multi-parameter co-tuning framework to overcome mode mismatch in heterogeneous near-field systems, providing new pathways for nanoscale thermal management and energy conversion.
- Open Access
- 23 July 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (4)
Role of dipole engineering in in-plane phonon thermal transport of BlueP/MXY (M = Mo, W; X/Y = S, Se) van der Waals heterostructures
Dipole engineering serves as a crucial non-destructive approach for modulating the electronic properties and interfacial coupling in two-dimensional layered materials and heterostructures. Here, the modulation of electronic properties and phonon transport in BlueP/MXY (M = Mo, W; X/Y = S, Se) heterostructures via dipole engineering is systematically investigated. We quantitatively evaluate the in-plane thermal conductivity to elucidate the role of dipole moment coupling, which is intrinsically controlled by the stacking order. Among the optical phonons, modes with interlayer vibrational characteristics (shear modes) are the dominant contributors to the in-plane thermal conductivity. Their overall contribution is important, ranking second only to that of the three acoustic phonon modes. Interestingly, dipole moment coupling governs the interlayer charge transfer, a mechanism that gives rise to the variations in phonon anharmonicity observed for different stacking orders. This work presents a paradigm for the manipulation of thermal transport in vdW heterostructures enabled by dipole engineering, which is of great significance for physical and engineering applications, including electronics, thermoelectrics, and thermal management.
- 23 July 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (4)
Open AccessRole of dipole engineering in in-plane phonon thermal transport of BlueP/MXY (M = Mo, W; X/Y = S, Se) van der Waals heterostructures
Dipole engineering serves as a crucial non-destructive approach for modulating the electronic properties and interfacial coupling in two-dimensional layered materials and heterostructures. Here, the modulation of electronic properties and phonon transport in BlueP/MXY (M = Mo, W; X/Y = S, Se) heterostructures via dipole engineering is systematically investigated. We quantitatively evaluate the in-plane thermal conductivity to elucidate the role of dipole moment coupling, which is intrinsically controlled by the stacking order. Among the optical phonons, modes with interlayer vibrational characteristics (shear modes) are the dominant contributors to the in-plane thermal conductivity. Their overall contribution is important, ranking second only to that of the three acoustic phonon modes. Interestingly, dipole moment coupling governs the interlayer charge transfer, a mechanism that gives rise to the variations in phonon anharmonicity observed for different stacking orders. This work presents a paradigm for the manipulation of thermal transport in vdW heterostructures enabled by dipole engineering, which is of great significance for physical and engineering applications, including electronics, thermoelectrics, and thermal management.
- 28 November 2023
- Published by World Scientific Pub Co Pte Ltd in Modern Physics Letters B
- Vol. 38 (17)
Two innovative derivation methods of the Nernst equation without any additional assumptions
It is found that without any additional assumptions, Nernst’s equation can be re-deduced from the experimental data obtained from the thermodynamic systems at ultra-low temperatures, which is different from the derivation processes in textbooks and literature, and consequently, the physical content included by Nernst’s equation should not be referred to as Nernst’s postulate or Nernst’s theorem. It should be renamed as the Nernst statement. This discovery will play an important role in improving the theoretical framework of thermodynamics. It can effectively prevent some artificial assumptions into the third law of thermodynamics, making it a true reflection of the objective world. It solves the awkward problem caused by using a thermodynamic theorem as the core contents of a thermodynamic law for over one hundred years.
- 28 November 2023
- Published by World Scientific Pub Co Pte Ltd in Modern Physics Letters B
- Vol. 38 (17)
Two innovative derivation methods of the Nernst equation without any additional assumptions
It is found that without any additional assumptions, Nernst’s equation can be re-deduced from the experimental data obtained from the thermodynamic systems at ultra-low temperatures, which is different from the derivation processes in textbooks and literature, and consequently, the physical content included by Nernst’s equation should not be referred to as Nernst’s postulate or Nernst’s theorem. It should be renamed as the Nernst statement. This discovery will play an important role in improving the theoretical framework of thermodynamics. It can effectively prevent some artificial assumptions into the third law of thermodynamics, making it a true reflection of the objective world. It solves the awkward problem caused by using a thermodynamic theorem as the core contents of a thermodynamic law for over one hundred years.
- 22 February 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 118 (8) , 083901
Graphene-anode thermionic converter demonstrating total photon reflection
An updated thermionic converter was established through the introduction of a graphene anode and an optical reflector, significantly decreasing the irreversible losses inside the device and enhancing the device performances. At 1940 K, the maximum efficiency and power output density of the converter reached and . The optimum performances of the proposed model were obviously better than those achieved using a graphene-anode thermionic converter without a reflector and a traditional thermionic converter with a metal anode. Importantly, the optimal regions of the key parameters were determined for the different temperatures of the heat source and the parametric selection criteria and design strategies for the proposed model are also provided. These are extremely important as they may facilitate the implementation of the device.- 22 February 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 118 (8) , 083901
Graphene-anode thermionic converter demonstrating total photon reflection
An updated thermionic converter was established through the introduction of a graphene anode and an optical reflector, significantly decreasing the irreversible losses inside the device and enhancing the device performances. At 1940 K, the maximum efficiency and power output density of the converter reached and . The optimum performances of the proposed model were obviously better than those achieved using a graphene-anode thermionic converter without a reflector and a traditional thermionic converter with a metal anode. Importantly, the optimal regions of the key parameters were determined for the different temperatures of the heat source and the parametric selection criteria and design strategies for the proposed model are also provided. These are extremely important as they may facilitate the implementation of the device.- 1 February 2021
- Published by Elsevier in Energy Conversion and Management
- Vol. 229
One of the most efficient methods to utilize full-spectrum solar energy: A photovoltaic-thermoradiative coupled system
- 1 February 2021
- Published by Elsevier in Energy Conversion and Management
- Vol. 229
One of the most efficient methods to utilize full-spectrum solar energy: A photovoltaic-thermoradiative coupled system
- 8 November 2019
- Published by Springer Nature in The European Physical Journal E
- Vol. 42 (11) , 140
Scattering of shock wave by impurities in a viscoelastic granular chain
The transmission and the reflection of a shock wave by one or several impurities in viscoelastic bead chains is studied in the present paper. There is only one reflected wave for a single...
- 8 November 2019
- Published by Springer Nature in The European Physical Journal E
- Vol. 42 (11) , 140
Scattering of shock wave by impurities in a viscoelastic granular chain
The transmission and the reflection of a shock wave by one or several impurities in viscoelastic bead chains is studied in the present paper. There is only one reflected wave for a single...