Gizele Celante
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gizele Celante has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Alcindo Aparecido dos Santos
Department of Fundamental Chemistry, Institute of Chemistry, University of São Paulo, São Paulo 05508-000, Brazil
3 shared publications - Alexandre Boari de Lima
Universidade Federal de Lavras, Lavras, Brazil
3 shared publications - Allana Cristina Faustino Martins
Department of Pharmaceutical Sciences North Dakota State University Fargo North Dakota USA
3 shared publications - Cynthia de Oliveira
Universidade Federal de Lavras, Lavras, Brazil
3 shared publications - Fábio Aurélio Dias Martins
Empresa de Pesquisa Agropecuária de Minas Gerais
3 shared publications - Katiana Simões Kittelson
Department of Pharmaceutical Sciences North Dakota State University Fargo North Dakota USA
3 shared publications
Latest Publications
- Open Access
- 11 September 2026
- Published by Springer Nature in Plant and Soil
- Vol. 527 (1) , 1043-1067
Optimizing grain sorghum selenium biofortification through foliar fertilization: integrating novel selenium sources, genotype, and contrasting tropical soils
Background and aims: Sorghum ( Sorghum bicolor L. Moench) is vital for more than 500 million people worldwide and is an essential component of animal feed, particularly in selenium (Se) deficient regions. Foliar Se fertilization is an efficient and environmentally safer strategy than traditional through the soil fertilization. This study evaluated the impact of novel Se sources on grain yield and nutritional quality across eight sorghum genotypes cultivated in tropical soils. Methods: The experimental design involved foliar Se fertilization at 10 g ha −1 using sodium selenate, potassium hydroxy-selenide, and acetylselenide, alongside a control treatment without Se. Experiments were conducted in two contrasting field environments: Lavras and Lambari, Brazil. Results: Selenium fertilization significantly increased Se concentration in both grains and shoots, primarily due to sodium selenate. In contrast, potassium hydroxy-selenide and acetylselenide resulted in Se concentrations in grains and shoots similar to the control. The response to Se depended on genotype and environment: K200, BRS310, and Enforcer showed the highest Se accumulation under selenate fertilization, while Enforcer and Nugrain420 showed increases in grain yield. Selenium treatments also affected macronutrient and micronutrient contents. Principal component analysis revealed strong interactions among Se sources, genotypes, and field environments that influenced both productivity and mineral composition. Conclusion: In summary, foliar Se fertilization is a promising biofortification strategy that enhances the nutritional quality of sorghum grains and increases grain yield in selected genotypes. Sodium selenate was primarily responsible for increases in grain and shoot Se concentration. Conversely, acetylselenide and potassium hydroxy-selenide contributed mainly through genotype-dependent effects on grain yield, mineral uptake, and crude protein content rather than Se-enrichment. These findings underscore the importance of source selection for successful biofortification strategies in Se-deficient regions.
- 11 September 2026
- Published by Springer Nature in Plant and Soil
- Vol. 527 (1) , 1043-1067
Open AccessOptimizing grain sorghum selenium biofortification through foliar fertilization: integrating novel selenium sources, genotype, and contrasting tropical soils
Background and aims: Sorghum ( Sorghum bicolor L. Moench) is vital for more than 500 million people worldwide and is an essential component of animal feed, particularly in selenium (Se) deficient regions. Foliar Se fertilization is an efficient and environmentally safer strategy than traditional through the soil fertilization. This study evaluated the impact of novel Se sources on grain yield and nutritional quality across eight sorghum genotypes cultivated in tropical soils. Methods: The experimental design involved foliar Se fertilization at 10 g ha −1 using sodium selenate, potassium hydroxy-selenide, and acetylselenide, alongside a control treatment without Se. Experiments were conducted in two contrasting field environments: Lavras and Lambari, Brazil. Results: Selenium fertilization significantly increased Se concentration in both grains and shoots, primarily due to sodium selenate. In contrast, potassium hydroxy-selenide and acetylselenide resulted in Se concentrations in grains and shoots similar to the control. The response to Se depended on genotype and environment: K200, BRS310, and Enforcer showed the highest Se accumulation under selenate fertilization, while Enforcer and Nugrain420 showed increases in grain yield. Selenium treatments also affected macronutrient and micronutrient contents. Principal component analysis revealed strong interactions among Se sources, genotypes, and field environments that influenced both productivity and mineral composition. Conclusion: In summary, foliar Se fertilization is a promising biofortification strategy that enhances the nutritional quality of sorghum grains and increases grain yield in selected genotypes. Sodium selenate was primarily responsible for increases in grain and shoot Se concentration. Conversely, acetylselenide and potassium hydroxy-selenide contributed mainly through genotype-dependent effects on grain yield, mineral uptake, and crude protein content rather than Se-enrichment. These findings underscore the importance of source selection for successful biofortification strategies in Se-deficient regions.
- 9 June 2026
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 29 (22)
Front Cover: Maleimides Revisited: Reactivity, Selectivity, and Emerging Synthetic Strategies (Eur. J. Org. Chem. 22/2026)
- 9 June 2026
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 29 (22)
Front Cover: Maleimides Revisited: Reactivity, Selectivity, and Emerging Synthetic Strategies (Eur. J. Org. Chem. 22/2026)
- Top Cited PapersOpen Access
- 1 June 2026
- Published by Springer Nature in Journal of Computer-Aided Molecular Design
- Vol. 40 (1) , 137
Reproducibility, validation, and failure modes across classical and AI-driven molecular docking
Molecular docking is indispensable across computer‑aided discovery. However, its conclusions often hinge more on modeling choices than on software brand or nominal score. In this review, we argue that docking should be treated explicitly as conditional modeling whose interpretability depends on structural provenance, ligand‑state definition, search‑space design, and validation under deployment‑relevant conditions. This framework is intended as a practical reference for evaluating docking rigor across both academic and applied workflows. We highlight recurrent failure modes, cross‑target score comparisons under non‑comparable states, over‑read scores as affinities, under‑modeled solvation/flexibility, and uncritical use of predicted structures, and show how AI both exacerbates and mitigates these risks. We then propose best practices for modern validation (self‑docking as necessary but insufficient; cross‑docking, decoys, apo/predicted structures, and out‑of‑distribution tests as essential complements) and offer a concise FAIR reporting checklist enabling reuse and audit. Looking forward, we contend that the most valuable advances are those that improve deployment‑relevant reliability, pose plausibility, enrich screening, and enhance robustness across receptor uncertainty, rather than tool novelty alone. This review reframes docking success from “obtaining a pose and a score” to earning confidence through transparent workflows and evaluation aligned with real use. In this context, the term “AI-driven” does not imply replacing physics-based docking, but rather expanding the workflow landscape in which classical and machine learning approaches coexist. This review, therefore, treats docking as a unified decision framework spanning both paradigms, with emphasis on how validation, generalization, and reproducibility requirements evolve in AI-assisted workflows. Graphical abstract The alternative text for this image may have been generated using AI.
- 1 June 2026
- Published by Springer Nature in Journal of Computer-Aided Molecular Design
- Vol. 40 (1) , 137
Top Cited PapersOpen AccessReproducibility, validation, and failure modes across classical and AI-driven molecular docking
Molecular docking is indispensable across computer‑aided discovery. However, its conclusions often hinge more on modeling choices than on software brand or nominal score. In this review, we argue that docking should be treated explicitly as conditional modeling whose interpretability depends on structural provenance, ligand‑state definition, search‑space design, and validation under deployment‑relevant conditions. This framework is intended as a practical reference for evaluating docking rigor across both academic and applied workflows. We highlight recurrent failure modes, cross‑target score comparisons under non‑comparable states, over‑read scores as affinities, under‑modeled solvation/flexibility, and uncritical use of predicted structures, and show how AI both exacerbates and mitigates these risks. We then propose best practices for modern validation (self‑docking as necessary but insufficient; cross‑docking, decoys, apo/predicted structures, and out‑of‑distribution tests as essential complements) and offer a concise FAIR reporting checklist enabling reuse and audit. Looking forward, we contend that the most valuable advances are those that improve deployment‑relevant reliability, pose plausibility, enrich screening, and enhance robustness across receptor uncertainty, rather than tool novelty alone. This review reframes docking success from “obtaining a pose and a score” to earning confidence through transparent workflows and evaluation aligned with real use. In this context, the term “AI-driven” does not imply replacing physics-based docking, but rather expanding the workflow landscape in which classical and machine learning approaches coexist. This review, therefore, treats docking as a unified decision framework spanning both paradigms, with emphasis on how validation, generalization, and reproducibility requirements evolve in AI-assisted workflows. Graphical abstract The alternative text for this image may have been generated using AI.
- Open Access
- 22 April 2026
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 29 (22) , e70423
Maleimides Revisited: Reactivity, Selectivity, and Emerging Synthetic Strategies
Maleimides are α,β‐unsaturated cyclic imides that serve as electronically tunable α,β‐unsaturated scaffolds enabling controlled bond construction. Recent advances have redefined maleimides from simple Michael acceptors into programmable electrophilic platforms that enable controlled regio‐, stereo‐, and chemoselective bond formation. Over the past 5 years, this versatile scaffold has seen renewed attention in forming CC, CN, and CS bonds through transition‐metal‐catalyzed alkylation, alkenylation, organocatalytic and metal‐catalyzed conjugate additions, and diverse cycloaddition reactions. This review summarizes recent synthetic approaches to maleimide construction and functionalization, with particular focus on nucleophilic additions involving carbon and heteroatom pronucleophiles, enantioselective metal‐catalyzed transformations including C–H activation, and [4 + 2], [3 + 2], and [2 + 2] cycloaddition strategies leading to structurally complex frameworks. Emphasis is placed on methodologies that address long‐standing challenges in maleimide chemistry, including control of selectivity, retention of unsaturation, and expansion of post‐functionalization through emerging and hybrid catalytic strategies.
- 22 April 2026
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 29 (22) , e70423
Open AccessMaleimides Revisited: Reactivity, Selectivity, and Emerging Synthetic Strategies
Maleimides are α,β‐unsaturated cyclic imides that serve as electronically tunable α,β‐unsaturated scaffolds enabling controlled bond construction. Recent advances have redefined maleimides from simple Michael acceptors into programmable electrophilic platforms that enable controlled regio‐, stereo‐, and chemoselective bond formation. Over the past 5 years, this versatile scaffold has seen renewed attention in forming CC, CN, and CS bonds through transition‐metal‐catalyzed alkylation, alkenylation, organocatalytic and metal‐catalyzed conjugate additions, and diverse cycloaddition reactions. This review summarizes recent synthetic approaches to maleimide construction and functionalization, with particular focus on nucleophilic additions involving carbon and heteroatom pronucleophiles, enantioselective metal‐catalyzed transformations including C–H activation, and [4 + 2], [3 + 2], and [2 + 2] cycloaddition strategies leading to structurally complex frameworks. Emphasis is placed on methodologies that address long‐standing challenges in maleimide chemistry, including control of selectivity, retention of unsaturation, and expansion of post‐functionalization through emerging and hybrid catalytic strategies.
- 12 August 2025
- Published by Elsevier in Journal of Food Composition and Analysis
- Vol. 148
Foliar fertilization for biofortification of grain sorghum with selenium
- 12 August 2025
- Published by Elsevier in Journal of Food Composition and Analysis
- Vol. 148
Foliar fertilization for biofortification of grain sorghum with selenium
- Open Access
Sodium Selenate, Potassium Hydroxy-Selenide, Acetylselenide and Their Effect on Antioxidant Metabolism and Plant Nutrition and Yield in Sorghum Genotypes
Agronomic biofortification with selenium (Se) effectively reduces hidden hunger and increases the nutritional intake of Se in people and animals. Because sorghum is a staple diet for millions of people and is used in animal feed, it becomes a crop with biofortification potential. Consequently, this study aimed to compare organoselenium compounds with selenate, which is effective in numerous crops, and to assess grain yield, the effect in the antioxidant system, and macronutrient/micronutrient contents of different sorghum genotypes treated with Se, via foliar spray. The trials used a 4 × 8 factorial design, with four Se sources (control—without Se supply, sodium selenate, potassium hydroxy-selenide, acetylselenide) and eight genotypes (BM737, BRS310, Enforcer, K200, Nugrain320, Nugrain420, Nugrain430, and SHS410). The Se rate used was 0.125 mg plant−1. All genotypes reacted effectively to foliar fertilization with Se through sodium selenate. In this experiment, potassium hydroxy-selenide and acetylselenide showed low Se levels and lower Se uptake and absorption efficiency than selenate. Selenium fertilization increased grain yield and altered lipid peroxidation by malondialdehyde content, hydrogen peroxide content, catalase activity, ascorbate peroxidase, superoxide dismutase, and macronutrients and micronutrients content of the studied genotypes. In sum, biofortification with selenium led to an overall yield increase of sorghum plants and supplementation with selenium through sodium selenate was more efficient than organoselenium compounds, yet acetylselenide had a positive effect on the antioxidant system. Sorghum can be effectively biofortified through the foliar application of sodium selenate; however, studying the interaction between organic and inorganic Se compounds in plants is necessary.
Open AccessSodium Selenate, Potassium Hydroxy-Selenide, Acetylselenide and Their Effect on Antioxidant Metabolism and Plant Nutrition and Yield in Sorghum Genotypes
Agronomic biofortification with selenium (Se) effectively reduces hidden hunger and increases the nutritional intake of Se in people and animals. Because sorghum is a staple diet for millions of people and is used in animal feed, it becomes a crop with biofortification potential. Consequently, this study aimed to compare organoselenium compounds with selenate, which is effective in numerous crops, and to assess grain yield, the effect in the antioxidant system, and macronutrient/micronutrient contents of different sorghum genotypes treated with Se, via foliar spray. The trials used a 4 × 8 factorial design, with four Se sources (control—without Se supply, sodium selenate, potassium hydroxy-selenide, acetylselenide) and eight genotypes (BM737, BRS310, Enforcer, K200, Nugrain320, Nugrain420, Nugrain430, and SHS410). The Se rate used was 0.125 mg plant−1. All genotypes reacted effectively to foliar fertilization with Se through sodium selenate. In this experiment, potassium hydroxy-selenide and acetylselenide showed low Se levels and lower Se uptake and absorption efficiency than selenate. Selenium fertilization increased grain yield and altered lipid peroxidation by malondialdehyde content, hydrogen peroxide content, catalase activity, ascorbate peroxidase, superoxide dismutase, and macronutrients and micronutrients content of the studied genotypes. In sum, biofortification with selenium led to an overall yield increase of sorghum plants and supplementation with selenium through sodium selenate was more efficient than organoselenium compounds, yet acetylselenide had a positive effect on the antioxidant system. Sorghum can be effectively biofortified through the foliar application of sodium selenate; however, studying the interaction between organic and inorganic Se compounds in plants is necessary.
- 1 January 2019
- Published by Elsevier in Dyes and Pigments
- Vol. 160, 208-216
Oxidation of tellurium dyes induced by mercury: More insights on the naked-eye and fluorescent Hg2+ detection
- 1 January 2019
- Published by Elsevier in Dyes and Pigments
- Vol. 160, 208-216
Oxidation of tellurium dyes induced by mercury: More insights on the naked-eye and fluorescent Hg2+ detection
- 1 December 2018
- Published by Elsevier in Dyes and Pigments
- Vol. 159, 121-127
Formation of an emissive telluroxide promoted by Hg2+ in aqueous environment: A new naked-eye and ratiometric rhodamine dimer fluorescent mercury(II) probe
- 1 December 2018
- Published by Elsevier in Dyes and Pigments
- Vol. 159, 121-127
Formation of an emissive telluroxide promoted by Hg2+ in aqueous environment: A new naked-eye and ratiometric rhodamine dimer fluorescent mercury(II) probe