Songzhu Luo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Songzhu Luo has a total of 97 co-authors. Here are the top co-authors by number of shared publications:
- Zhichuan Jason Xu
School of Materials Science and Engineering Nanyang Technological University Singapore Singapore
10 shared publications - Chencheng Dai
School of Material Science and Engineering, Nanyang Technological University, Singapore, Singapore
6 shared publications - Qian Wu
School of Material Science and Engineering, Nanyang Technological University, Singapore, Singapore
5 shared publications Shibo Xi
Institute of Sustainability for Chemicals, Energy and Environment (ISCE2), Agency for Science, Technology and Research (A*STAR), Singapore 627833, Singapore
5 shared publications- Fanxu Meng
School of Material Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore
4 shared publications Jiarui Wang
School of Materials Science and Engineering Nanyang Technological University 50 Nanyang Avenue Singapore 639798 Singapore
4 shared publications
Latest Publications
- 18 June 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (14) , 4640-4650
Breaking the performance trade-offs in ammonia synthesis via spontaneous proton supply
Anodic activation creates a specific CoFe-(oxy)hydroxide interface on spinel CoFe 0.25 Cr 1.75 O 4 , enabling spontaneous lattice-proton supply for fast nitrate hydrogenation and broad-window ammonia electrosynthesis.
- 18 June 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (14) , 4640-4650
Breaking the performance trade-offs in ammonia synthesis via spontaneous proton supply
Anodic activation creates a specific CoFe-(oxy)hydroxide interface on spinel CoFe 0.25 Cr 1.75 O 4 , enabling spontaneous lattice-proton supply for fast nitrate hydrogenation and broad-window ammonia electrosynthesis.
- 21 October 2025
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 114, 116-125
Magnetic field mediated oxygen radical mechanism for enhanced water oxidation
- 21 October 2025
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 114, 116-125
Magnetic field mediated oxygen radical mechanism for enhanced water oxidation
- Open Access
- 1 July 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Remote Iron dynamics of NiFe (oxy)hydroxides toward robust active sites in water oxidation
Ni(Fe) (oxy)hydroxides have long been recognized as benchmark electrocatalysts for water oxidation in alkaline media. Maximizing their activity and longevity will be vital for facilitating scalable water electrolysis. However, progress is hindered by insufficient understandings of surface Fe dynamics and by the absence of effective regulatory approach. Here we show the surface Fe dynamics beyond the immediate vicinity of Ni(Fe) oxyhydroxides on working electrode but being remotely influenced by Fe diffusion and deposition on the counter electrode. While Fe could be highly active in reversible dynamics, disruptions in this process can result in significant activity decay due to the loss or deactivation of surface Fe species. On-site regulation of Fe dynamics is inspired by pre-catalysts. [Ni0.75Fe0.25]0.6Zn0.4Clx derives Ni(Fe) oxyhydroxide with enhanced performance due to Zn leaching and cation defects that improve Fe site accommodation. Theoretical studies suggest that Fe dissolution occurs when cation defects are lacking but shifts to Fe capture as defects increase, underscoring on-site defect manipulation to maintain the abundance of active Fe sites.
- 1 July 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Open AccessRemote Iron dynamics of NiFe (oxy)hydroxides toward robust active sites in water oxidation
Ni(Fe) (oxy)hydroxides have long been recognized as benchmark electrocatalysts for water oxidation in alkaline media. Maximizing their activity and longevity will be vital for facilitating scalable water electrolysis. However, progress is hindered by insufficient understandings of surface Fe dynamics and by the absence of effective regulatory approach. Here we show the surface Fe dynamics beyond the immediate vicinity of Ni(Fe) oxyhydroxides on working electrode but being remotely influenced by Fe diffusion and deposition on the counter electrode. While Fe could be highly active in reversible dynamics, disruptions in this process can result in significant activity decay due to the loss or deactivation of surface Fe species. On-site regulation of Fe dynamics is inspired by pre-catalysts. [Ni0.75Fe0.25]0.6Zn0.4Clx derives Ni(Fe) oxyhydroxide with enhanced performance due to Zn leaching and cation defects that improve Fe site accommodation. Theoretical studies suggest that Fe dissolution occurs when cation defects are lacking but shifts to Fe capture as defects increase, underscoring on-site defect manipulation to maintain the abundance of active Fe sites.
- Open Access
- 26 June 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1
Author Correction: Support-free iridium hydroxide for high-efficiency proton-exchange membrane water electrolysis
- 26 June 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1
Open AccessAuthor Correction: Support-free iridium hydroxide for high-efficiency proton-exchange membrane water electrolysis
- Open Access
- 19 March 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-10
Support-free iridium hydroxide for high-efficiency proton-exchange membrane water electrolysis
The large-scale implementation of proton-exchange membrane water electrolyzers relies on high-performance membrane-electrode assemblies that use minimal iridium (Ir). In this study, we present a support-free Ir catalyst developed through a metal-oxide-based molecular self-assembly strategy. The unique self-assembly of densely isolated single IrO6H8 octahedra leads to the formation of μm-sized hierarchically porous Ir hydroxide particles. The support-free Ir catalyst exhibits a high turnover frequency of 5.31 s⁻¹ at 1.52 V in the membrane-electrode assembly. In the corresponding proton-exchange membrane water electrolyzer, notable performance with a cell voltage of less than 1.75 V at 4.0 A cm⁻² (Ir loading of 0.375 mg cm⁻²) is achieved. This metal-oxide-based molecular self-assembly strategy may provide a general approach for the development of advanced support-free catalysts for high-performance membrane-electrode assemblies.
- 19 March 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-10
Open AccessSupport-free iridium hydroxide for high-efficiency proton-exchange membrane water electrolysis
The large-scale implementation of proton-exchange membrane water electrolyzers relies on high-performance membrane-electrode assemblies that use minimal iridium (Ir). In this study, we present a support-free Ir catalyst developed through a metal-oxide-based molecular self-assembly strategy. The unique self-assembly of densely isolated single IrO6H8 octahedra leads to the formation of μm-sized hierarchically porous Ir hydroxide particles. The support-free Ir catalyst exhibits a high turnover frequency of 5.31 s⁻¹ at 1.52 V in the membrane-electrode assembly. In the corresponding proton-exchange membrane water electrolyzer, notable performance with a cell voltage of less than 1.75 V at 4.0 A cm⁻² (Ir loading of 0.375 mg cm⁻²) is achieved. This metal-oxide-based molecular self-assembly strategy may provide a general approach for the development of advanced support-free catalysts for high-performance membrane-electrode assemblies.
- 26 June 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (31)
Elevated Water Oxidation by Cation Leaching Enabled Tunable Surface Reconstruction
Water electrolysis is one promising and eco‐friendly technique for energy storage, yet its overall efficiency is hindered by the sluggish kinetics of oxygen evolution reaction (OER). Therefore, developing strategies to boost OER catalyst performance is crucial. With the advances in characterization techniques, an extensive phenomenon of surface structure evolution into an active amorphous layer was uncovered. Surface reconstruction in a controlled fashion was then proposed as an emerging strategy to elevate water oxidation efficiency. In this work, Cr substitution induces the reconstruction of NiFexCr2‐xO4 during cyclic voltammetry (CV) conditioning by Cr leaching, which leads to a superior OER performance. The best‐performed NiFe0.25Cr1.75O4 shows a ~1500 % current density promotion at overpotential η=300 mV, which outperforms many advanced NiFe‐based OER catalysts. It is also found that their OER activities are mainly determined by Ni : Fe ratio rather than considering the contribution of Cr. Meanwhile, the turnover frequency (TOF) values based on redox peak and total mass were obtained and analysed, and their possible limitations in the case of NiFexCr2‐xO4 are discussed. Additionally, the high activity and durability were further verified in a membrane electrode assembly (MEA) cell, highlighting its potential for practical large‐scale and sustainable hydrogen gas generation.
- 26 June 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (31)
Elevated Water Oxidation by Cation Leaching Enabled Tunable Surface Reconstruction
Water electrolysis is one promising and eco‐friendly technique for energy storage, yet its overall efficiency is hindered by the sluggish kinetics of oxygen evolution reaction (OER). Therefore, developing strategies to boost OER catalyst performance is crucial. With the advances in characterization techniques, an extensive phenomenon of surface structure evolution into an active amorphous layer was uncovered. Surface reconstruction in a controlled fashion was then proposed as an emerging strategy to elevate water oxidation efficiency. In this work, Cr substitution induces the reconstruction of NiFexCr2‐xO4 during cyclic voltammetry (CV) conditioning by Cr leaching, which leads to a superior OER performance. The best‐performed NiFe0.25Cr1.75O4 shows a ~1500 % current density promotion at overpotential η=300 mV, which outperforms many advanced NiFe‐based OER catalysts. It is also found that their OER activities are mainly determined by Ni : Fe ratio rather than considering the contribution of Cr. Meanwhile, the turnover frequency (TOF) values based on redox peak and total mass were obtained and analysed, and their possible limitations in the case of NiFexCr2‐xO4 are discussed. Additionally, the high activity and durability were further verified in a membrane electrode assembly (MEA) cell, highlighting its potential for practical large‐scale and sustainable hydrogen gas generation.
- 26 June 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (31) , e202402184
Elevated Water Oxidation by Cation Leaching Enabled Tunable Surface Reconstruction
Water electrolysis is one promising and eco‐friendly technique for energy storage, yet its overall efficiency is hindered by the sluggish kinetics of oxygen evolution reaction (OER). Therefore, developing strategies to boost OER catalyst performance is crucial. With the advances in characterization techniques, an extensive phenomenon of surface structure evolution into an active amorphous layer was uncovered. Surface reconstruction in a controlled fashion was then proposed as an emerging strategy to elevate water oxidation efficiency. In this work, Cr substitution induces the reconstruction of NiFexCr2‐xO4 during cyclic voltammetry (CV) conditioning by Cr leaching, which leads to a superior OER performance. The best‐performed NiFe0.25Cr1.75O4 shows a ~1500 % current density promotion at overpotential η=300 mV, which outperforms many advanced NiFe‐based OER catalysts. It is also found that their OER activities are mainly determined by Ni : Fe ratio rather than considering the contribution of Cr. Meanwhile, the turnover frequency (TOF) values based on redox peak and total mass were obtained and analysed, and their possible limitations in the case of NiFexCr2‐xO4 are discussed. Additionally, the high activity and durability were further verified in a membrane electrode assembly (MEA) cell, highlighting its potential for practical large‐scale and sustainable hydrogen gas generation.
- 26 June 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (31) , e202402184
Elevated Water Oxidation by Cation Leaching Enabled Tunable Surface Reconstruction
Water electrolysis is one promising and eco‐friendly technique for energy storage, yet its overall efficiency is hindered by the sluggish kinetics of oxygen evolution reaction (OER). Therefore, developing strategies to boost OER catalyst performance is crucial. With the advances in characterization techniques, an extensive phenomenon of surface structure evolution into an active amorphous layer was uncovered. Surface reconstruction in a controlled fashion was then proposed as an emerging strategy to elevate water oxidation efficiency. In this work, Cr substitution induces the reconstruction of NiFexCr2‐xO4 during cyclic voltammetry (CV) conditioning by Cr leaching, which leads to a superior OER performance. The best‐performed NiFe0.25Cr1.75O4 shows a ~1500 % current density promotion at overpotential η=300 mV, which outperforms many advanced NiFe‐based OER catalysts. It is also found that their OER activities are mainly determined by Ni : Fe ratio rather than considering the contribution of Cr. Meanwhile, the turnover frequency (TOF) values based on redox peak and total mass were obtained and analysed, and their possible limitations in the case of NiFexCr2‐xO4 are discussed. Additionally, the high activity and durability were further verified in a membrane electrode assembly (MEA) cell, highlighting its potential for practical large‐scale and sustainable hydrogen gas generation.
- Open Access
- 22 February 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (10) , 5668-5678
ALD-made noble metal high entropy alloy nanofilm with sub-surface amorphization for enhanced hydrogen evolution
Noble metal-based high entropy alloys (NM-HEAs) have been shown to have optimized catalytic properties through compositional adjustments. Recently, an amorphous HEA, known as high-entropy metallic glass (HEMG), has gained attention for its potential in surface modification and atomic rearrangement. In this work, RhRuPtPdIr HEA thin films (Rh : Ru : Pt : Pd : Ir = 26.1 : 28.7 : 8.6 : 16.3 : 20.3) were synthesized on glassy carbon (GC) electrodes using precisely controlled sequential atomic layer deposition (ALD) process of each noble metal layer, followed by electrical Joule heating (EJH) alloying at 1000 °C for 5 seconds. Cross-sectional HR-TEM imaging revealed a thickness of 20 nm and the surface microstructure composed of nanocrystallites and amorphous structures, suggesting explosive crystallization during the EJH process. The HEA thin film achieved outstanding HER performance, exhibiting overpotentials of 13, 77, and 65 mV at a current density of 10 mA cm−2 and Tafel slopes of 14, 45, and 78 mV dec−1 in 0.5 M H2SO4, 1.0 M PBS, and 1.0 M KOH electrolytes, respectively. Remarkably, HEA/GC in an acidic environment reached strikingly top-level kinetics, which was mainly contributed by intrinsic activity and surface amorphization. The corresponding DFT study revealed a modified electronic structure of the HEA surface that facilitates surface–hydrogen interaction. The study demonstrates the potential of NM-HEA nanofilm as catalysts for highly efficient HER in harsh environments. This study also demonstrates that ALD-EJH is a novel and reliable method for synthesizing, manipulating, and tuning complex high-entropy nanomaterials.
- 22 February 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (10) , 5668-5678
Open AccessALD-made noble metal high entropy alloy nanofilm with sub-surface amorphization for enhanced hydrogen evolution
Noble metal-based high entropy alloys (NM-HEAs) have been shown to have optimized catalytic properties through compositional adjustments. Recently, an amorphous HEA, known as high-entropy metallic glass (HEMG), has gained attention for its potential in surface modification and atomic rearrangement. In this work, RhRuPtPdIr HEA thin films (Rh : Ru : Pt : Pd : Ir = 26.1 : 28.7 : 8.6 : 16.3 : 20.3) were synthesized on glassy carbon (GC) electrodes using precisely controlled sequential atomic layer deposition (ALD) process of each noble metal layer, followed by electrical Joule heating (EJH) alloying at 1000 °C for 5 seconds. Cross-sectional HR-TEM imaging revealed a thickness of 20 nm and the surface microstructure composed of nanocrystallites and amorphous structures, suggesting explosive crystallization during the EJH process. The HEA thin film achieved outstanding HER performance, exhibiting overpotentials of 13, 77, and 65 mV at a current density of 10 mA cm−2 and Tafel slopes of 14, 45, and 78 mV dec−1 in 0.5 M H2SO4, 1.0 M PBS, and 1.0 M KOH electrolytes, respectively. Remarkably, HEA/GC in an acidic environment reached strikingly top-level kinetics, which was mainly contributed by intrinsic activity and surface amorphization. The corresponding DFT study revealed a modified electronic structure of the HEA surface that facilitates surface–hydrogen interaction. The study demonstrates the potential of NM-HEA nanofilm as catalysts for highly efficient HER in harsh environments. This study also demonstrates that ALD-EJH is a novel and reliable method for synthesizing, manipulating, and tuning complex high-entropy nanomaterials.
- 7 December 2023
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 17 (2) , 704-716
Optimizing electronic synergy of atomically dispersed dual-metal Ni–N 4 and Fe–N 4 sites with adjacent Fe nanoclusters for high-efficiency oxygen electrocatalysis
The electronic synergy of Fe nanoclusters and Ni/Fe–N 4 single-atomic sites optimizes the adsorption/desorption of oxygenated intermediates and reduces the energy barrier of the oxygen electrocatalysis, boosting the Zn–air batteries performance.
- 7 December 2023
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 17 (2) , 704-716
Optimizing electronic synergy of atomically dispersed dual-metal Ni–N 4 and Fe–N 4 sites with adjacent Fe nanoclusters for high-efficiency oxygen electrocatalysis
The electronic synergy of Fe nanoclusters and Ni/Fe–N 4 single-atomic sites optimizes the adsorption/desorption of oxygenated intermediates and reduces the energy barrier of the oxygen electrocatalysis, boosting the Zn–air batteries performance.
- Open Access
- 25 August 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (34) , eadh9487
Essential role of lattice oxygen in methanol electrochemical refinery toward formate
Developing technologies based on the concept of methanol electrochemical refinery (e-refinery) is promising for carbon-neutral chemical manufacturing. However, a lack of mechanism understanding and material properties that control the methanol e-refinery catalytic performances hinders the discovery of efficient catalysts. Here, using 18 O isotope–labeled catalysts, we find that the oxygen atoms in formate generated during the methanol e-refinery reaction can originate from the catalysts’ lattice oxygen and the O-2p-band center levels can serve as an effective descriptor to predict the catalytic performance of the catalysts, namely, the formate production rates and Faradaic efficiencies. Moreover, the identified descriptor is consolidated by additional catalysts and theoretical mechanisms from density functional theory. This work provides direct experimental evidence of lattice oxygen participation and offers an efficient design principle for the methanol e-refinery reaction to formate, which may open up new research directions in understanding and designing electrified conversions of small molecules.
- 25 August 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (34) , eadh9487
Open AccessEssential role of lattice oxygen in methanol electrochemical refinery toward formate
Developing technologies based on the concept of methanol electrochemical refinery (e-refinery) is promising for carbon-neutral chemical manufacturing. However, a lack of mechanism understanding and material properties that control the methanol e-refinery catalytic performances hinders the discovery of efficient catalysts. Here, using 18 O isotope–labeled catalysts, we find that the oxygen atoms in formate generated during the methanol e-refinery reaction can originate from the catalysts’ lattice oxygen and the O-2p-band center levels can serve as an effective descriptor to predict the catalytic performance of the catalysts, namely, the formate production rates and Faradaic efficiencies. Moreover, the identified descriptor is consolidated by additional catalysts and theoretical mechanisms from density functional theory. This work provides direct experimental evidence of lattice oxygen participation and offers an efficient design principle for the methanol e-refinery reaction to formate, which may open up new research directions in understanding and designing electrified conversions of small molecules.