Shouyan Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shouyan Chen has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
Lin Cui
National Engineering Laboratory for Reducing Emissions from Coal Combustion, Engineering Research Center of Environmental Thermal Technology of Ministry of Education, Shandong Key Laboratory of Green Thermal Power and Carbon Reduction, School of Energy and Power Engineering, Shandong University, Jinan 250061, China
4 shared publications- Yong Dong
Shandong University
3 shared publications Chunyuan Ma
National Engineering Laboratory for Reducing Emissions from Coal Combustion, Engineering Research Center of Environmental Thermal Technology of Ministry of Education, Shandong Key Laboratory of Energy Carbon Reduction and Resource Utilization, School of Energy and Power Engineering, Shandong University, Jinan, China
2 shared publications- Guifang Chen
National Engineering Laboratory for Reducing Emissions from Coal Combustion, Engineering Research Center of Environmental Thermal Technology, Ministry of Education, Shandong Key Laboratory of Green Thermal Power and Carbon Reduction, School of Energy and Power Engineering, Shandong University, Jinan 250061, China
2 shared publications Guojie Qi
Shandong Beichen Mechanical & Electrical Equipment Co. Jinan, Shandong 250061, China; Shanxi Research Institute for Clean Energy, Tsinghua University, Taiyan 030000, China
2 shared publications- Jing Sun
National Engineering Laboratory for Reducing Emissions from Coal Combustion, Engineering Research Center of Environmental Thermal Technology of Ministry of Education, Shandong Key Laboratory of Green Thermal Power and Carbon Reduction, Shandong University, Jinan 250061, China
2 shared publications
Latest Publications
- 30 April 2026
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 720, 140652
Ni-Ce synergistic enhancement enabling NiCe@F bifunctional material for integrated CO2 capture and methanation
- 30 April 2026
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 720, 140652
Ni-Ce synergistic enhancement enabling NiCe@F bifunctional material for integrated CO2 capture and methanation
- Open Access
Catalytic Ozonation of Ammonia Nitrogen to Nitrogen by Manganese-Loaded Powdered Activated Coke
Activated carbon has shown good catalytic performance in water treatment, but its wide application is limited by its high price. Activated coke exhibits functional groups and is low-cost. However, there is limited research on activated coke as a catalyst. In our previous study, powdered activated coke (PAC) exhibited good catalytic performance in NH3-N treatment with ozonation. Increasing nitrogen selectivity is the key to harmless degradation of NH3-N, which has received little attention. In this paper, manganese-loaded powdered coke (Mn–PAC) was prepared, aiming to further improve the nitrogen selectivity. Under the same conditions, the PAC/O3 system achieved 92.16% NH3-N removal and 49.46% nitrogen selectivity, while the Mn–PAC/O3 system achieved almost 100% NH3-N removal and 79.31% N2 selectivity. When Mn–PAC was reused for the sixth time, the system achieved about 70% and 46% NH3-N removal and N2 selectivity, both of which were about 10% higher than those of PAC. Complex redox and synergistic interactions existed in the Mn–PAC/O3 system. The Mn–PAC surface contains reactive sites such as C=C, C=O, π–π bonds, ArOH, and various MnOx. These components collectively facilitate ozone decomposition into ·OH, ·O2−, and 1O2. The 1O2 may play a significant role in converting NH3-N to N2.
Open AccessCatalytic Ozonation of Ammonia Nitrogen to Nitrogen by Manganese-Loaded Powdered Activated Coke
Activated carbon has shown good catalytic performance in water treatment, but its wide application is limited by its high price. Activated coke exhibits functional groups and is low-cost. However, there is limited research on activated coke as a catalyst. In our previous study, powdered activated coke (PAC) exhibited good catalytic performance in NH3-N treatment with ozonation. Increasing nitrogen selectivity is the key to harmless degradation of NH3-N, which has received little attention. In this paper, manganese-loaded powdered coke (Mn–PAC) was prepared, aiming to further improve the nitrogen selectivity. Under the same conditions, the PAC/O3 system achieved 92.16% NH3-N removal and 49.46% nitrogen selectivity, while the Mn–PAC/O3 system achieved almost 100% NH3-N removal and 79.31% N2 selectivity. When Mn–PAC was reused for the sixth time, the system achieved about 70% and 46% NH3-N removal and N2 selectivity, both of which were about 10% higher than those of PAC. Complex redox and synergistic interactions existed in the Mn–PAC/O3 system. The Mn–PAC surface contains reactive sites such as C=C, C=O, π–π bonds, ArOH, and various MnOx. These components collectively facilitate ozone decomposition into ·OH, ·O2−, and 1O2. The 1O2 may play a significant role in converting NH3-N to N2.
- Open Access
Study of Properties of Composite Cementitious Materials with Sulfoaluminate Cement and Solid Waste Based on Compaction Forming Process
The traditional cement compaction process boasts notable advantages such as high strength, durability, and aesthetic appeal. However, compaction forming technology for cement products results in high carbon emissions. Consequently, it is imperative to develop low-carbon strategies for these products. This study investigates the modification of solid waste-based low-carbon sulfoaluminate cementitious material (SSCM) using mineral powder (MP) and steel slag micro powder (SSMP) under compaction forming technology. The results indicate that higher compaction pressure leads to higher early-stage strength, while the later-stage strength is primarily influenced by the degree of hydration. At a compaction pressure of 40 MPa, the one-day compressive strength of the material exceeded 70 MPa, representing a 48.31% increase compared to the control group. Under compaction forming, the hydration reaction rate decreased, but the compaction process significantly reduced porosity. Moreover, higher pressure correlated with a reduction in the proportion of harmful pores. Incorporating 25% MP and 20% SSMP increased the compressive strength by 10.66% to 113.5 MPa. According to orthogonal experimental results, the optimal molding conditions entail a 20% MP content, a 20% SSMP content, and a molding pressure of 40 MPa. The research findings can serve as a theoretical foundation for the widespread application of SSCM and compaction forming technology in practical engineering.
Open AccessStudy of Properties of Composite Cementitious Materials with Sulfoaluminate Cement and Solid Waste Based on Compaction Forming Process
The traditional cement compaction process boasts notable advantages such as high strength, durability, and aesthetic appeal. However, compaction forming technology for cement products results in high carbon emissions. Consequently, it is imperative to develop low-carbon strategies for these products. This study investigates the modification of solid waste-based low-carbon sulfoaluminate cementitious material (SSCM) using mineral powder (MP) and steel slag micro powder (SSMP) under compaction forming technology. The results indicate that higher compaction pressure leads to higher early-stage strength, while the later-stage strength is primarily influenced by the degree of hydration. At a compaction pressure of 40 MPa, the one-day compressive strength of the material exceeded 70 MPa, representing a 48.31% increase compared to the control group. Under compaction forming, the hydration reaction rate decreased, but the compaction process significantly reduced porosity. Moreover, higher pressure correlated with a reduction in the proportion of harmful pores. Incorporating 25% MP and 20% SSMP increased the compressive strength by 10.66% to 113.5 MPa. According to orthogonal experimental results, the optimal molding conditions entail a 20% MP content, a 20% SSMP content, and a molding pressure of 40 MPa. The research findings can serve as a theoretical foundation for the widespread application of SSCM and compaction forming technology in practical engineering.
- Open Access
Performance of Powdered Activated Coke Produced by One-Step Rapid Process from Lignite: Phenol Adsorption from Synthetic Wastewater and Hydrothermal Regeneration
Low-cost powdered activated coke (PAC) produced by a one-step rapid method with lignite was used as an adsorbent for the advanced treatment of phenol-containing wastewater to evaluate the feasibility of replacing high-cost commercial powdered activated carbon. Characterization using infrared spectral analysis, SEM, and BET showed that the PAC mesopores were well developed. PAC exhibited a high adsorption performance for phenol in static experiments. The adsorption was almost in equilibrium within 20 min, and the removal efficiency reached 85.4% with 1.5 g L−1 PAC and 99.9% with 4 g L−1 PAC. As common components in wastewater, NaCl and Na2SO4 did not exhibit significant competitive adsorption with phenol in PAC. The adsorption process occurred in accordance with the Langmuir model and the pseudo-second order kinetic model. Furthermore, the effects of hydrothermal regeneration on PAC adsorbing phenol were studied, and the adsorption capacity of PAC after five regeneration cycles was 86.1% of that of the new PAC, which still had good adsorption performance. PAC offers significant advantages in terms of adsorption capacity, economic feasibility, regeneration, and recycling, providing a practical solution to the problem of phenol-containing wastewater pollution.
Open AccessPerformance of Powdered Activated Coke Produced by One-Step Rapid Process from Lignite: Phenol Adsorption from Synthetic Wastewater and Hydrothermal Regeneration
Low-cost powdered activated coke (PAC) produced by a one-step rapid method with lignite was used as an adsorbent for the advanced treatment of phenol-containing wastewater to evaluate the feasibility of replacing high-cost commercial powdered activated carbon. Characterization using infrared spectral analysis, SEM, and BET showed that the PAC mesopores were well developed. PAC exhibited a high adsorption performance for phenol in static experiments. The adsorption was almost in equilibrium within 20 min, and the removal efficiency reached 85.4% with 1.5 g L−1 PAC and 99.9% with 4 g L−1 PAC. As common components in wastewater, NaCl and Na2SO4 did not exhibit significant competitive adsorption with phenol in PAC. The adsorption process occurred in accordance with the Langmuir model and the pseudo-second order kinetic model. Furthermore, the effects of hydrothermal regeneration on PAC adsorbing phenol were studied, and the adsorption capacity of PAC after five regeneration cycles was 86.1% of that of the new PAC, which still had good adsorption performance. PAC offers significant advantages in terms of adsorption capacity, economic feasibility, regeneration, and recycling, providing a practical solution to the problem of phenol-containing wastewater pollution.
- 5 April 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 692, 137509
Design of Ni-FAU Zeolite Bifunctional Materials for Integrated Carbon Dioxide Capture and Methanation: Construction of ultrafine NiO nanoparticles
- 5 April 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 692, 137509
Design of Ni-FAU Zeolite Bifunctional Materials for Integrated Carbon Dioxide Capture and Methanation: Construction of ultrafine NiO nanoparticles
- 12 November 2024
- Published by Elsevier in Journal of Cleaner Production
- Vol. 482
Electrochemically mediated amine Regeneration-CO2 mineralization: Mechanism and influencing factors
- 12 November 2024
- Published by Elsevier in Journal of Cleaner Production
- Vol. 482
Electrochemically mediated amine Regeneration-CO2 mineralization: Mechanism and influencing factors
- Open Access
Progress on the Microwave-Assisted Recycling of Spent Lithium Battery Graphite
The robust development of electric vehicles has driven a surging decommission stream of lithium-ion batteries (LIBs) owing to their limited service life. The recycling of spent LIBs has become an urgent and essential task for the sustainable development of the LIB industry. However, the prevailing recycling methods focus only on recycling valuable metal, whilst the graphite anode materials are usually discarded or burned as fuels, leading to great waste of valuable carbon material. A facile strategy to obtain value-added products in an efficient manner is of great significance for the recycling of spent graphite. As graphite has excellent microwave absorption capability and electrical conductivity, microwave radiation on spent graphite can induce a Joule heat–discharge–plasma coupled effect, leading to a rapid heating process, especially when discharge occurs, exhibiting a thermal shock effect with the generation of a large number of high-energy electrons and active materials. This special feature facilitates microwave heating that is tailored for assisting the removal of impurities, structure repair, and graphite intercalation and exfoliation in an efficient manner. Therefore, different from the conventional graphite recycling route that is associated with energy/solution-intensive processes, this paper reviews the progress on microwave-assisted removal of impurities, repair of damaged graphite structure, and innovatively discusses the breakthroughs in microwave-assisted preparation of graphite intercalation compounds, expanded graphite, graphene and graphene-based materials, and porous graphene, with an aim to provide a scientific reference for the value-added resource utilization of spent graphite and preparation of new energy storage materials.
Open AccessProgress on the Microwave-Assisted Recycling of Spent Lithium Battery Graphite
The robust development of electric vehicles has driven a surging decommission stream of lithium-ion batteries (LIBs) owing to their limited service life. The recycling of spent LIBs has become an urgent and essential task for the sustainable development of the LIB industry. However, the prevailing recycling methods focus only on recycling valuable metal, whilst the graphite anode materials are usually discarded or burned as fuels, leading to great waste of valuable carbon material. A facile strategy to obtain value-added products in an efficient manner is of great significance for the recycling of spent graphite. As graphite has excellent microwave absorption capability and electrical conductivity, microwave radiation on spent graphite can induce a Joule heat–discharge–plasma coupled effect, leading to a rapid heating process, especially when discharge occurs, exhibiting a thermal shock effect with the generation of a large number of high-energy electrons and active materials. This special feature facilitates microwave heating that is tailored for assisting the removal of impurities, structure repair, and graphite intercalation and exfoliation in an efficient manner. Therefore, different from the conventional graphite recycling route that is associated with energy/solution-intensive processes, this paper reviews the progress on microwave-assisted removal of impurities, repair of damaged graphite structure, and innovatively discusses the breakthroughs in microwave-assisted preparation of graphite intercalation compounds, expanded graphite, graphene and graphene-based materials, and porous graphene, with an aim to provide a scientific reference for the value-added resource utilization of spent graphite and preparation of new energy storage materials.
- Open Access
- 4 November 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7  (45) , 41107-41119
SO2 Adsorption and Kinetics Analysis during Supported Triethanolamine Acetate Ionic Liquid Desulfurization
Ionic liquid desulfurization is an effective method for achieving green and circulating desulfurization. To overcome the negative impact of the high viscosity of ionic liquids on the desulfurization process, an economical and efficient supported ionic liquidî—¸triethanolamine acetate ionic liquid/silica (TAIL/SiO2) was prepared in this study. TAIL is synthesized using triethanolamine and acetic acid and subsequently loaded onto silica gel particles. The effects of the reaction temperature, humidity, silica particle size, and loading ratio on SO2 adsorption are investigated using a fixed-bed reactor. The results indicate that the surface of the silica gel loaded with ionic liquid formed uneven spherical clusters, and the aggregate volume increased with an increase in the loading ratio. The TAIL/SiO2 sulfur capacity could be effectively increased by increasing the loading ratio (exceeding 0.74 is unfavorable), decreasing the silica particle size, and reducing the reaction temperature and moisture content. The maximum sulfur capacity can reach 124.98 mg SO2/(g TAIL/SiO2) under experimental conditions, which is higher than that of activated carbon. The Bangham rate model effectively predicts the kinetics of the adsorption process of SO2.
- 4 November 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7  (45) , 41107-41119
Open AccessSO2 Adsorption and Kinetics Analysis during Supported Triethanolamine Acetate Ionic Liquid Desulfurization
Ionic liquid desulfurization is an effective method for achieving green and circulating desulfurization. To overcome the negative impact of the high viscosity of ionic liquids on the desulfurization process, an economical and efficient supported ionic liquidî—¸triethanolamine acetate ionic liquid/silica (TAIL/SiO2) was prepared in this study. TAIL is synthesized using triethanolamine and acetic acid and subsequently loaded onto silica gel particles. The effects of the reaction temperature, humidity, silica particle size, and loading ratio on SO2 adsorption are investigated using a fixed-bed reactor. The results indicate that the surface of the silica gel loaded with ionic liquid formed uneven spherical clusters, and the aggregate volume increased with an increase in the loading ratio. The TAIL/SiO2 sulfur capacity could be effectively increased by increasing the loading ratio (exceeding 0.74 is unfavorable), decreasing the silica particle size, and reducing the reaction temperature and moisture content. The maximum sulfur capacity can reach 124.98 mg SO2/(g TAIL/SiO2) under experimental conditions, which is higher than that of activated carbon. The Bangham rate model effectively predicts the kinetics of the adsorption process of SO2.
- 4 November 2022
- Published by Elsevier in Science of The Total Environment
- Vol. 858  (Pt 2) , 159877
Distribution of the existence forms of condensable particulate matter during condensation: The surface collection and the space suspension forms
- 4 November 2022
- Published by Elsevier in Science of The Total Environment
- Vol. 858  (Pt 2) , 159877
Distribution of the existence forms of condensable particulate matter during condensation: The surface collection and the space suspension forms
- 6 September 2021
- Published by Springer Nature in Waste Disposal & Sustainable Energy
- Vol. 3  (3) , 185-200
Numerical study on the role of microwave–metal discharge in microwave pyrolysis of WPCBs
- 6 September 2021
- Published by Springer Nature in Waste Disposal & Sustainable Energy
- Vol. 3  (3) , 185-200
Numerical study on the role of microwave–metal discharge in microwave pyrolysis of WPCBs