Juping Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Juping Xu has a total of 103 co-authors. Here are the top co-authors by number of shared publications:
Jiandang Liu
5 shared publicationsWen Yin
Spallation Neutron Source Science Center, Dongguan
5 shared publicationsBangjiao Ye
4 shared publicationsQiang Li
4 shared publications- Wen Yin
Spallation Neutron Source Science Center Dongguan China
4 shared publications - Bao-Tian Wang
Institute of High Energy Physics, Chinese Academy of Sciences, Beijing, China
2 shared publications
Latest Publications
- 16 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (42) , 46004-46016
A High-Nickel Cathode Material for Lithium-Ion Batteries Integrating a Proposed 3D Ionic Percolation Network and Interwoven Layered/Rock-Salt Nanodomains
High-nickel single-crystal cathodes effectively address the poor mechanical stability and severe side reactions that plague their polycrystalline counterparts. However, they introduce new structural challenges, including extended Li+ diffusion pathways, which in turn lead to structural slips, lattice distortions, and phase transformations, ultimately compromising both electrochemical capacity and structural stability. Herein, we report a state-of-the-art cathode architecture for high-nickel materials, derived from high-energy neutron irradiation of single-crystal LiNi0.92Co0.06Mn0.02O2 particles. This process induces long-range Li/Ni antisite disorder and short-range metal–oxygen octahedral distortions, concurrently yielding a nanostructure of abundant grain boundaries and interwoven layered/rock-salt nanodomains within the single-crystalline particles. These grain boundaries are proposed to constitute a 3D percolation network for rapid Li+ transport, whereas the interwoven nanodomains may act as local structural reinforcing units that help suppress irreversible phase transitions and the propagation of interfacial side reactions during cycling. These characteristics are favorable for sustaining continuous Li+ deintercalation/intercalation and reversible electrochemistry, thereby preserving the structural stability of the single-crystal framework while simultaneously shortening diffusion pathways. As a result, the engineered cathode delivers a high specific discharge capacity of 213.9 mAh/g at 0.2 C and 152.2 mAh/g at 10 C (within 4.5 V). Moreover, it retains 80.0% of its initial capacity after 450 cycles at 5 C, significantly outperforming the reference single-crystal cathode (64.2%). This work establishes high-energy neutron irradiation as an effective cathode reconstruction strategy, offering a viable route toward robust, high-energy cathodes.
- 16 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (42) , 46004-46016
A High-Nickel Cathode Material for Lithium-Ion Batteries Integrating a Proposed 3D Ionic Percolation Network and Interwoven Layered/Rock-Salt Nanodomains
High-nickel single-crystal cathodes effectively address the poor mechanical stability and severe side reactions that plague their polycrystalline counterparts. However, they introduce new structural challenges, including extended Li+ diffusion pathways, which in turn lead to structural slips, lattice distortions, and phase transformations, ultimately compromising both electrochemical capacity and structural stability. Herein, we report a state-of-the-art cathode architecture for high-nickel materials, derived from high-energy neutron irradiation of single-crystal LiNi0.92Co0.06Mn0.02O2 particles. This process induces long-range Li/Ni antisite disorder and short-range metal–oxygen octahedral distortions, concurrently yielding a nanostructure of abundant grain boundaries and interwoven layered/rock-salt nanodomains within the single-crystalline particles. These grain boundaries are proposed to constitute a 3D percolation network for rapid Li+ transport, whereas the interwoven nanodomains may act as local structural reinforcing units that help suppress irreversible phase transitions and the propagation of interfacial side reactions during cycling. These characteristics are favorable for sustaining continuous Li+ deintercalation/intercalation and reversible electrochemistry, thereby preserving the structural stability of the single-crystal framework while simultaneously shortening diffusion pathways. As a result, the engineered cathode delivers a high specific discharge capacity of 213.9 mAh/g at 0.2 C and 152.2 mAh/g at 10 C (within 4.5 V). Moreover, it retains 80.0% of its initial capacity after 450 cycles at 5 C, significantly outperforming the reference single-crystal cathode (64.2%). This work establishes high-energy neutron irradiation as an effective cathode reconstruction strategy, offering a viable route toward robust, high-energy cathodes.
- 13 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (42) , 45738-45748
Giant Baromagnetic Effect Induced by Spin Engineering in Mn3(Zn0.25Sn0.25Ga0.25Ge0.25)C
Baromagnetic effect (BME), arising from pressure-induced spin reorientation, holds great potential for next-generation information technologies owing to its strong multifield coupling characteristics. However, the practical implementation of BME is hindered by the small magnetization change and the large driving pressure required in conventional materials. Guided by spin-polarized calculations, this work successfully obtains a giant BME material Mn3(Zn0.25Sn0.25Ga0.25Ge0.25)C, which exhibits a remarkable pressure-induced maximum magnetization change (|ΔMmax|) of 2.63 μB·f.u.–1 and an exceptionally large baromagnetic coefficient (BMC, d) of 15.0 μB·f.u.–1·GPa–1. Temperature-dependent neutron powder diffraction (NPD) measurements reveal a clear evolution from the nearly collinear antiferromagnetic (cAFM) configuration with k = (1/2, 1/2, 1/2) to the ferromagnetic (FM) configuration, indicating that the spins are highly susceptible to reorientation under external perturbations. First-principles calculations further clarify that pressure modulates the energy difference (ΔE) between the cAFM and FM configurations via the Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction, elucidating the microscopic origin of the giant BME. This demonstration establishes spin engineering, achieved through precise control of spin configurations via targeted element selection, as an effective strategy for realizing high-performance baromagnetic systems. It further provides clear guidance for designing materials with superior functional properties.
- 13 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (42) , 45738-45748
Giant Baromagnetic Effect Induced by Spin Engineering in Mn3(Zn0.25Sn0.25Ga0.25Ge0.25)C
Baromagnetic effect (BME), arising from pressure-induced spin reorientation, holds great potential for next-generation information technologies owing to its strong multifield coupling characteristics. However, the practical implementation of BME is hindered by the small magnetization change and the large driving pressure required in conventional materials. Guided by spin-polarized calculations, this work successfully obtains a giant BME material Mn3(Zn0.25Sn0.25Ga0.25Ge0.25)C, which exhibits a remarkable pressure-induced maximum magnetization change (|ΔMmax|) of 2.63 μB·f.u.–1 and an exceptionally large baromagnetic coefficient (BMC, d) of 15.0 μB·f.u.–1·GPa–1. Temperature-dependent neutron powder diffraction (NPD) measurements reveal a clear evolution from the nearly collinear antiferromagnetic (cAFM) configuration with k = (1/2, 1/2, 1/2) to the ferromagnetic (FM) configuration, indicating that the spins are highly susceptible to reorientation under external perturbations. First-principles calculations further clarify that pressure modulates the energy difference (ΔE) between the cAFM and FM configurations via the Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction, elucidating the microscopic origin of the giant BME. This demonstration establishes spin engineering, achieved through precise control of spin configurations via targeted element selection, as an effective strategy for realizing high-performance baromagnetic systems. It further provides clear guidance for designing materials with superior functional properties.
- 27 June 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (27) , 28838-28847
Gate-Tailoring with Protons and Metal Cations in a Flexible Zeolite for High-Efficiency Ethylene/Ethane Separation
Ethylene/ethane separation underpins global polyolefin production but remains one of the most energy-intensive processes in the chemical industry because it relies on cryogenic distillation. Adsorptive separation using porous materials offers a promising alternative to conventional cryogenic distillation, potentially reducing energy consumption. However, the nearly identical physical properties of ethylene and ethane make the development of highly selective adsorbents exceptionally challenging. Herein, we report a lithium-exchanged silicoaluminophosphate RHO zeolite (Li-SAPO-RHO) that achieves unprecedented ethylene/ethane separation by exploiting a cooperative gating mechanism in a flexible framework. A synergistic proton-Li+ gating effect at the flexible 8-ring apertures differentially modulates molecular transport barriers. Brønsted protons selectively facilitate ethylene diffusion, while Li+ cations create a trapdoor barrier that preferentially suppresses ethane transport, thereby amplifying kinetic discrimination. As a result, Li-SAPO-RHO exhibits excellent ethylene-selective adsorption performance, enabling the direct production of polymer-grade ethylene (>99.9%) from refinery dry gas with a productivity of 238.6 mmol/L. Structural analyses combined with ab initio molecular dynamics simulations reveal how proton-cation synergy amplifies kinetic discrimination between closely related molecules. These findings establish gate cooperativity as a powerful design principle for energy-efficient adsorptive separations. Due to its low cost, exceptional hydrothermal stability, and excellent cycling performance, Li-SAPO-RHO offers a promising platform for industrial light-olefin separations.
- 27 June 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (27) , 28838-28847
Gate-Tailoring with Protons and Metal Cations in a Flexible Zeolite for High-Efficiency Ethylene/Ethane Separation
Ethylene/ethane separation underpins global polyolefin production but remains one of the most energy-intensive processes in the chemical industry because it relies on cryogenic distillation. Adsorptive separation using porous materials offers a promising alternative to conventional cryogenic distillation, potentially reducing energy consumption. However, the nearly identical physical properties of ethylene and ethane make the development of highly selective adsorbents exceptionally challenging. Herein, we report a lithium-exchanged silicoaluminophosphate RHO zeolite (Li-SAPO-RHO) that achieves unprecedented ethylene/ethane separation by exploiting a cooperative gating mechanism in a flexible framework. A synergistic proton-Li+ gating effect at the flexible 8-ring apertures differentially modulates molecular transport barriers. Brønsted protons selectively facilitate ethylene diffusion, while Li+ cations create a trapdoor barrier that preferentially suppresses ethane transport, thereby amplifying kinetic discrimination. As a result, Li-SAPO-RHO exhibits excellent ethylene-selective adsorption performance, enabling the direct production of polymer-grade ethylene (>99.9%) from refinery dry gas with a productivity of 238.6 mmol/L. Structural analyses combined with ab initio molecular dynamics simulations reveal how proton-cation synergy amplifies kinetic discrimination between closely related molecules. These findings establish gate cooperativity as a powerful design principle for energy-efficient adsorptive separations. Due to its low cost, exceptional hydrothermal stability, and excellent cycling performance, Li-SAPO-RHO offers a promising platform for industrial light-olefin separations.
- Open Access
- 15 May 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 114 (2)
Phase transition and negative thermal expansion in copper pyrophosphate Cu 2 P 2 O 7 studied by neutron total scattering and the reverse Monte Carlo method
The phase transition in copper pyrophosphate, Cu 2 P 2 O 7 , has been studied using neutron total scattering and the reverse Monte Carlo method. The results show the growth of disorder of the orientations of the PO 4 tetrahedra and of the positions of the copper atoms along the long O–Cu–O linkage in the CuO 6 octahedra distorted by the Jahn–Teller effect. These two types of disorder are coupled, and neither show the preference for distinct sites of partial atomic occupancy in the high-temperature phase. The origin of the negative thermal expansion identified in Cu 2 P 2 O 7 can be understood as arising from the ordering of the copper atoms leading to one Cu–O bond expanding more than the other contracts.
- 15 May 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 114 (2)
Open AccessPhase transition and negative thermal expansion in copper pyrophosphate Cu 2 P 2 O 7 studied by neutron total scattering and the reverse Monte Carlo method
The phase transition in copper pyrophosphate, Cu 2 P 2 O 7 , has been studied using neutron total scattering and the reverse Monte Carlo method. The results show the growth of disorder of the orientations of the PO 4 tetrahedra and of the positions of the copper atoms along the long O–Cu–O linkage in the CuO 6 octahedra distorted by the Jahn–Teller effect. These two types of disorder are coupled, and neither show the preference for distinct sites of partial atomic occupancy in the high-temperature phase. The origin of the negative thermal expansion identified in Cu 2 P 2 O 7 can be understood as arising from the ordering of the copper atoms leading to one Cu–O bond expanding more than the other contracts.
- 2 January 2026
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 2 (2) , 519-528
Oxygen Evolution Reaction and Its Competition with Chlorine Oxidation Reaction on Electrode/Electrolyte Interfaces
- 2 January 2026
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 2 (2) , 519-528
Oxygen Evolution Reaction and Its Competition with Chlorine Oxidation Reaction on Electrode/Electrolyte Interfaces
- 1 October 2024
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 610
Dilution induced magnetic localization in Rb(CoNi)2Se2 single crystals- 1 October 2024
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 610
Dilution induced magnetic localization in Rb(CoNi)2Se2 single crystalsEnhancing Ionic Transport and Structural Stability of Lithium‐Rich Layered Oxide Cathodes via Local Structure Regulation
Lithium‐rich manganese‐based layered oxides (LRM) have garnered considerable attention as cathode materials due to their superior performance. However, the inherent structural degradation and obstruction of ion transport during cycling lead to capacity and voltage decay, impeding their practical applications. Herein, an Sb‐doped LRM material with local spinel phase is reported, which has good compatibility with the layered structure and provides 3D Li+ diffusion channels to accelerate Li+ transport. Additionally, the strong Sb‐O bond enhances the stability of the layered structure. Differential electrochemical mass spectrometry indicates that highly electronegative Sb doping effectively suppresses the release of oxygen in the crystal structure and mitigates successive electrolyte decomposition, thereby reducing structural degradation of the material. As a result of this dual‐functional design, the 0.5 Sb‐doped material with local spinel phases exhibits favorable cycling stability, retaining 81.7% capacity after 300 cycles at 1C, and an average discharge voltage of 1.87 mV per cycle, which is far superior to untreated material with retention values of 28.8% and 3.43 mV, respectively. This study systematically introduces Sb doping and regulates local spinel phases to facilitate ion transport and alleviate structural degradation of LRM, thereby suppressing capacity and voltage fading, and improving the electrochemical performance of batteries.
Enhancing Ionic Transport and Structural Stability of Lithium‐Rich Layered Oxide Cathodes via Local Structure Regulation
Lithium‐rich manganese‐based layered oxides (LRM) have garnered considerable attention as cathode materials due to their superior performance. However, the inherent structural degradation and obstruction of ion transport during cycling lead to capacity and voltage decay, impeding their practical applications. Herein, an Sb‐doped LRM material with local spinel phase is reported, which has good compatibility with the layered structure and provides 3D Li+ diffusion channels to accelerate Li+ transport. Additionally, the strong Sb‐O bond enhances the stability of the layered structure. Differential electrochemical mass spectrometry indicates that highly electronegative Sb doping effectively suppresses the release of oxygen in the crystal structure and mitigates successive electrolyte decomposition, thereby reducing structural degradation of the material. As a result of this dual‐functional design, the 0.5 Sb‐doped material with local spinel phases exhibits favorable cycling stability, retaining 81.7% capacity after 300 cycles at 1C, and an average discharge voltage of 1.87 mV per cycle, which is far superior to untreated material with retention values of 28.8% and 3.43 mV, respectively. This study systematically introduces Sb doping and regulates local spinel phases to facilitate ion transport and alleviate structural degradation of LRM, thereby suppressing capacity and voltage fading, and improving the electrochemical performance of batteries.
- Open Access
- 1 December 2019
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 51 (8) , 1998-2004
Monte Carlo shielding evaluation of a CSNS Multi-Physics instrument
- 1 December 2019
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 51 (8) , 1998-2004
Open AccessMonte Carlo shielding evaluation of a CSNS Multi-Physics instrument