Jaeho Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jaeho Lee has a total of 77 co-authors. Here are the top co-authors by number of shared publications:
- Ziqi Yu
Toyota Research Institute of North America, Toyota Motor North America, Ann Arbor, USA
10 shared publications - Zongqing Ren
Department of Mechanical and Aerospace Engineering, University of California at Irvine, Irvine, CA, USA
10 shared publications - Laia Ferrer-Argemi
Department of Mechanical and Aerospace Engineering, University of California , Irvine, California 92697, USA
7 shared publications - Youngjae Yoo
Department of Advanced Materials Engineering Chung‐Ang University Anseong‐si Republic of Korea
5 shared publications - Jae Choon Kim
Samsung Electronics Co., Ltd
4 shared publications Jonathan Sullivan
Department of Mechanical and Aerospace Engineering, University of California, Irvine, USA
4 shared publications
Latest Publications
- Open Access
Polymer‐Based Passive Radiative Cooling A Structural Design Perspective
Passive radiative cooling (PRC) offers a sustainable pathway for heat dissipation to outer space without energy input. Polymers have emerged as attractive platforms owing to their lightweight, flexibility, low cost, and structural tunability. This review highlights structure‐oriented strategies for polymer‐based PRC, categorized into fibrous, porous, photonic/meta, and hybrid composite designs. Fibrous networks enhance solar scattering while maintaining breathability; porous systems utilize multi‐scale pores for strong reflectance and broadband infrared emission; photonic/meta‐structures enable spectral selectivity and color control; and hybrids integrate inorganic fillers to achieve robustness and multifunctionality. Representative studies report solar reflectance above 98%, emissivity above 97%, and net cooling powers exceeding 100 W·m −2 under daytime conditions. Beyond performance, advances in eco‐friendly polymers, humidity‐tolerant structures, and scalable fabrication are emphasized. General design principles are summarized within a structure–property–performance framework, stressing broadband solar scattering, efficient IR emission, scalable processing, and interfacial engineering. Remaining challenges include balancing color with cooling efficiency, establishing standardized evaluation protocols, and ensuring durability for practical applications. This review outlines pathways for transitioning polymer‐based PRC from laboratory research to large‐scale deployment in buildings, textiles, and emerging technologies. image
Open AccessPolymer‐Based Passive Radiative Cooling A Structural Design Perspective
Passive radiative cooling (PRC) offers a sustainable pathway for heat dissipation to outer space without energy input. Polymers have emerged as attractive platforms owing to their lightweight, flexibility, low cost, and structural tunability. This review highlights structure‐oriented strategies for polymer‐based PRC, categorized into fibrous, porous, photonic/meta, and hybrid composite designs. Fibrous networks enhance solar scattering while maintaining breathability; porous systems utilize multi‐scale pores for strong reflectance and broadband infrared emission; photonic/meta‐structures enable spectral selectivity and color control; and hybrids integrate inorganic fillers to achieve robustness and multifunctionality. Representative studies report solar reflectance above 98%, emissivity above 97%, and net cooling powers exceeding 100 W·m −2 under daytime conditions. Beyond performance, advances in eco‐friendly polymers, humidity‐tolerant structures, and scalable fabrication are emphasized. General design principles are summarized within a structure–property–performance framework, stressing broadband solar scattering, efficient IR emission, scalable processing, and interfacial engineering. Remaining challenges include balancing color with cooling efficiency, establishing standardized evaluation protocols, and ensuring durability for practical applications. This review outlines pathways for transitioning polymer‐based PRC from laboratory research to large‐scale deployment in buildings, textiles, and emerging technologies. image
- Top Cited PapersOpen Access
- 30 October 2024
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 46 (3) , e2400770
Enhancing Passive Radiative Cooling Films with Hollow Yttrium‐Oxide Spheres Insights from FDTD Simulation
Passive daytime radiative cooling (PDRC) presents a promising avenue for efficient thermal management without relying on electrical power. In this study, the potential of integrating Hollow Yttrium‐Oxide Spheres (HYSs) within a Polydimethylsiloxane (PDMS) matrix to enhance PDRC is investigated. Through a combination of experimental characterization and computational analysis, the optical properties and radiative cooling performance of PDMS films embedded with HYSs are evaluated. These results demonstrate that HYSs significantly improve both solar reflectivity and long‐wave infrared (LWIR) emissivity of the PDMS matrix. Finite‐Difference Time‐Domain (FDTD) simulations confirm the scattering efficiency of HYSs across various wavelength ranges, highlighting their effectiveness as additives for enhancing the radiative properties of passive cooling materials. Experimental validation reveals enhanced reflectivity and emissivity of PDMS films with embedded HYSs, resulting in superior cooling performance compared to non‐HYS counterparts. Overall, this study underscores the potential of HYS‐infused PDMS films as a promising solution for passive radiative cooling, with broad applicability in diverse domains requiring efficient thermal management solutions. Additionally, these research insights pave the way for establishing an AI database for passive radiative cooling research, offering new avenues for further exploration and application in this field.
- 30 October 2024
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 46 (3) , e2400770
Top Cited PapersOpen AccessEnhancing Passive Radiative Cooling Films with Hollow Yttrium‐Oxide Spheres Insights from FDTD Simulation
Passive daytime radiative cooling (PDRC) presents a promising avenue for efficient thermal management without relying on electrical power. In this study, the potential of integrating Hollow Yttrium‐Oxide Spheres (HYSs) within a Polydimethylsiloxane (PDMS) matrix to enhance PDRC is investigated. Through a combination of experimental characterization and computational analysis, the optical properties and radiative cooling performance of PDMS films embedded with HYSs are evaluated. These results demonstrate that HYSs significantly improve both solar reflectivity and long‐wave infrared (LWIR) emissivity of the PDMS matrix. Finite‐Difference Time‐Domain (FDTD) simulations confirm the scattering efficiency of HYSs across various wavelength ranges, highlighting their effectiveness as additives for enhancing the radiative properties of passive cooling materials. Experimental validation reveals enhanced reflectivity and emissivity of PDMS films with embedded HYSs, resulting in superior cooling performance compared to non‐HYS counterparts. Overall, this study underscores the potential of HYS‐infused PDMS films as a promising solution for passive radiative cooling, with broad applicability in diverse domains requiring efficient thermal management solutions. Additionally, these research insights pave the way for establishing an AI database for passive radiative cooling research, offering new avenues for further exploration and application in this field.
- Open Access
- 27 June 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (24)
Machine learning-assisted thermoelectric cooling for on-demand multi-hotspot thermal management
Thermoelectric coolers (TECs) offer a promising solution for direct cooling of local hotspots and active thermal management in advanced electronic systems. However, TECs present significant trade-offs among spatial cooling, heating, and power consumption. The optimization of TECs requires extensive simulations, which are impractical for managing actual systems with multiple hotspots under spatial and temporal variations. In this study, we present a novel machine learning-assisted optimization algorithm for thermoelectric coolers that can achieve global optimal temperature by individually controlling TEC units based on real-time multi-hotspot conditions across the entire domain. We train a convolutional neural network with a combination of the inception module and multi-task learning approach to comprehend the coupled thermal-electrical physics underlying the system and attain accurate predictions for both temperature and power consumption with and without TECs. Due to the intricate interaction among passive thermal gradient, Peltier effect and Joule effect, a local optimal TEC control experiences spatial temperature trade-off which may not lead to a global optimal solution. To address this issue, we develop a backtracking-based optimization algorithm using the machine learning model to iterate all possible TEC assignments for attaining global optimal solutions. For any m × n matrix with NHS hotspots (n, m ≤ 10, 1 ≤ NHS ≤ 20), our algorithm is capable of providing 52.4% peak temperature reduction and its corresponding TEC array control within an average of 1.64 s while iterating through tens of temperature predictions behind-the-scenes. This represents a speed increase of over three orders of magnitude compared to traditional finite element method strategies which take approximately 27 min.
- 27 June 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (24)
Open AccessMachine learning-assisted thermoelectric cooling for on-demand multi-hotspot thermal management
Thermoelectric coolers (TECs) offer a promising solution for direct cooling of local hotspots and active thermal management in advanced electronic systems. However, TECs present significant trade-offs among spatial cooling, heating, and power consumption. The optimization of TECs requires extensive simulations, which are impractical for managing actual systems with multiple hotspots under spatial and temporal variations. In this study, we present a novel machine learning-assisted optimization algorithm for thermoelectric coolers that can achieve global optimal temperature by individually controlling TEC units based on real-time multi-hotspot conditions across the entire domain. We train a convolutional neural network with a combination of the inception module and multi-task learning approach to comprehend the coupled thermal-electrical physics underlying the system and attain accurate predictions for both temperature and power consumption with and without TECs. Due to the intricate interaction among passive thermal gradient, Peltier effect and Joule effect, a local optimal TEC control experiences spatial temperature trade-off which may not lead to a global optimal solution. To address this issue, we develop a backtracking-based optimization algorithm using the machine learning model to iterate all possible TEC assignments for attaining global optimal solutions. For any m × n matrix with NHS hotspots (n, m ≤ 10, 1 ≤ NHS ≤ 20), our algorithm is capable of providing 52.4% peak temperature reduction and its corresponding TEC array control within an average of 1.64 s while iterating through tens of temperature predictions behind-the-scenes. This represents a speed increase of over three orders of magnitude compared to traditional finite element method strategies which take approximately 27 min.
- Open Access
- 26 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (4) , 2577-2584
Dynamic Thermal Management in SOI Transistors Using Holey Silicon-Based Thermoelectric Cooling
Silicon-on-insulator (SOI) technology offers many advantages for transistors while also presenting significant challenges in thermal management. The buried oxide (BOX) layer impedes vertical heat dissipation, rendering conventional cooling solutions based on air and liquid coolers inefficient. In this study, we propose a novel theoretical design of a holey silicon-based lateral thermoelectric cooler (TEC) that provides a unique cooling solution for SOI transistors. By redistributing heat laterally, this TEC overcomes the limitation of poor vertical heat dissipation caused by the BOX layer, meanwhile taking advantage of the sustained temperature gradient in the device layer. In addition, we present a novel precooling strategy which utilizes a long-time, optimal-voltage TEC cooling pulse to cool down a short-time, high-power-density heating pulse. We evaluate the cooling performance through simulation of two devices: an SOI transistor-TEC device and a 5 $\times$ 5 SOI transistor-TEC array device. Under a 10 1.s transient heat pulse with high-power density of 11 000 W/cm $^\text{2}$ (1.6 W), the SOI transistor-TEC device with a 10 3.m thick BOX layer can be cooled from 465.7 $^{\circ}$ C down to 407.4 $^{\circ}$ C (6. $\textit{T}$ $=$ 58.3 $^{\circ}$ C) in peak hotspot temperature when precooled with a 1000 10.s TEC pulse, consuming 0.20 W of TEC power. Furthermore, the SOI transistor-TEC array device provides spatial temperature control by incorporating multiple coolers which enable selective cooling for individual transistor units without significant loss of cooling performance. In summary, our TEC design exhibits great potential in offering dynamic thermal management for a wide range of advanced SOI devices.
- 26 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (4) , 2577-2584
Open AccessDynamic Thermal Management in SOI Transistors Using Holey Silicon-Based Thermoelectric Cooling
Silicon-on-insulator (SOI) technology offers many advantages for transistors while also presenting significant challenges in thermal management. The buried oxide (BOX) layer impedes vertical heat dissipation, rendering conventional cooling solutions based on air and liquid coolers inefficient. In this study, we propose a novel theoretical design of a holey silicon-based lateral thermoelectric cooler (TEC) that provides a unique cooling solution for SOI transistors. By redistributing heat laterally, this TEC overcomes the limitation of poor vertical heat dissipation caused by the BOX layer, meanwhile taking advantage of the sustained temperature gradient in the device layer. In addition, we present a novel precooling strategy which utilizes a long-time, optimal-voltage TEC cooling pulse to cool down a short-time, high-power-density heating pulse. We evaluate the cooling performance through simulation of two devices: an SOI transistor-TEC device and a 5 $\times$ 5 SOI transistor-TEC array device. Under a 10 1.s transient heat pulse with high-power density of 11 000 W/cm $^\text{2}$ (1.6 W), the SOI transistor-TEC device with a 10 3.m thick BOX layer can be cooled from 465.7 $^{\circ}$ C down to 407.4 $^{\circ}$ C (6. $\textit{T}$ $=$ 58.3 $^{\circ}$ C) in peak hotspot temperature when precooled with a 1000 10.s TEC pulse, consuming 0.20 W of TEC power. Furthermore, the SOI transistor-TEC array device provides spatial temperature control by incorporating multiple coolers which enable selective cooling for individual transistor units without significant loss of cooling performance. In summary, our TEC design exhibits great potential in offering dynamic thermal management for a wide range of advanced SOI devices.
- Open Access
- 19 February 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (8)
Highly tailorable thermomechanical properties of nanograined silicon: Importance of grain size and grain anisotropy
Nanocrystalline silicon can have unique thermal transport and mechanical properties governed by its constituent grain microstructure. Here, we use phonon ray-tracing and molecular dynamics simulations to demonstrate the largely tunable thermomechanical behaviors with varying grain sizes (a0) and aspect ratios (ξ). Our work shows that, by selectively increasing the grain size along the heat transfer direction while keeping the grain area constant, the in-plane lattice thermal conductivity (kx) increases more significantly than the cross-plane lattice thermal conductivity (ky) due to anisotropic phonon–grain boundary scattering. While kx generally increases with increasing ξ, a critical value exists for ξ at which kx reaches its maximum. Beyond this transition point, further increases in ξ result in a decrease in kx due to substantial scattering of low-frequency phonons with anisotropic grain boundaries. Moreover, we observe reductions in the elastic and shear modulus with decreasing grain size, and this lattice softening leads to significant reductions in phonon group velocity and thermal conductivity. By considering both thermal and mechanical size effects, we identify two distinct regimes of thermal transport, in which anisotropic phonon–grain boundary scattering becomes more appreciable at low temperatures and lattice softening becomes more pronounced at high temperatures. Through phonon spectral analysis, we attribute the significant thermal conductivity anisotropy in nanograined silicon to grain boundary scattering of low-frequency phonons and the softening-driven thermal conductivity reduction to Umklapp scattering of high-frequency phonons. These findings offer insights into the manipulation of thermomechanical properties of nanocrystalline silicon via microstructure engineering, carrying profound implications for the development of future nanomaterials.
- 19 February 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (8)
Open AccessHighly tailorable thermomechanical properties of nanograined silicon: Importance of grain size and grain anisotropy
Nanocrystalline silicon can have unique thermal transport and mechanical properties governed by its constituent grain microstructure. Here, we use phonon ray-tracing and molecular dynamics simulations to demonstrate the largely tunable thermomechanical behaviors with varying grain sizes (a0) and aspect ratios (ξ). Our work shows that, by selectively increasing the grain size along the heat transfer direction while keeping the grain area constant, the in-plane lattice thermal conductivity (kx) increases more significantly than the cross-plane lattice thermal conductivity (ky) due to anisotropic phonon–grain boundary scattering. While kx generally increases with increasing ξ, a critical value exists for ξ at which kx reaches its maximum. Beyond this transition point, further increases in ξ result in a decrease in kx due to substantial scattering of low-frequency phonons with anisotropic grain boundaries. Moreover, we observe reductions in the elastic and shear modulus with decreasing grain size, and this lattice softening leads to significant reductions in phonon group velocity and thermal conductivity. By considering both thermal and mechanical size effects, we identify two distinct regimes of thermal transport, in which anisotropic phonon–grain boundary scattering becomes more appreciable at low temperatures and lattice softening becomes more pronounced at high temperatures. Through phonon spectral analysis, we attribute the significant thermal conductivity anisotropy in nanograined silicon to grain boundary scattering of low-frequency phonons and the softening-driven thermal conductivity reduction to Umklapp scattering of high-frequency phonons. These findings offer insights into the manipulation of thermomechanical properties of nanocrystalline silicon via microstructure engineering, carrying profound implications for the development of future nanomaterials.
- Open Access
- 11 May 2023
- Published by Elsevier in Materials & Design
- Vol. 231
Tunable thermal transport in 4D printed mechanical metamaterials
- 11 May 2023
- Published by Elsevier in Materials & Design
- Vol. 231
Open AccessTunable thermal transport in 4D printed mechanical metamaterials
- Open Access
- 6 May 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-17
Deep learning-based inverse design of microstructured materials for optical optimization and thermal radiation control
Microstructures with engineered properties are critical to thermal management in aerospace and space applications. Due to the overwhelming number of microstructure design variables, traditional approaches to material optimization can have time-consuming processes and limited use cases. Here, we combine a surrogate optical neural network with an inverse neural network and dynamic post-processing to form an aggregated neural network inverse design process. Our surrogate network emulates finite-difference time-domain simulations (FDTD) by developing a relationship between the microstructure’s geometry, wavelength, discrete material properties, and the output optical properties. The surrogate optical solver works in tandem with an inverse neural network to predict a microstructure’s design properties that will match an input optical spectrum. As opposed to conventional approaches that are constrained by material selection, our network can identify new material properties that best optimize the input spectrum and match the output to an existing material. The output is evaluated using critical design constraints, simulated in FDTD, and used to retrain the surrogate—forming a self-learning loop. The presented framework is applicable to the inverse design of various optical microstructures, and the deep learning-derived approach will allow complex and user-constrained optimization for thermal radiation control in future aerospace and space systems.
- 6 May 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-17
Open AccessDeep learning-based inverse design of microstructured materials for optical optimization and thermal radiation control
Microstructures with engineered properties are critical to thermal management in aerospace and space applications. Due to the overwhelming number of microstructure design variables, traditional approaches to material optimization can have time-consuming processes and limited use cases. Here, we combine a surrogate optical neural network with an inverse neural network and dynamic post-processing to form an aggregated neural network inverse design process. Our surrogate network emulates finite-difference time-domain simulations (FDTD) by developing a relationship between the microstructure’s geometry, wavelength, discrete material properties, and the output optical properties. The surrogate optical solver works in tandem with an inverse neural network to predict a microstructure’s design properties that will match an input optical spectrum. As opposed to conventional approaches that are constrained by material selection, our network can identify new material properties that best optimize the input spectrum and match the output to an existing material. The output is evaluated using critical design constraints, simulated in FDTD, and used to retrain the surrogate—forming a self-learning loop. The presented framework is applicable to the inverse design of various optical microstructures, and the deep learning-derived approach will allow complex and user-constrained optimization for thermal radiation control in future aerospace and space systems.
- 29 November 2022
- Published by Wiley in ChemSusChem
- Vol. 15 (24)
Front Cover: Passive Daytime Radiative Cooling by Thermoplastic Polyurethane Wrapping Films with Controlled Hierarchical Porous Structures (ChemSusChem 24/2022)
- 29 November 2022
- Published by Wiley in ChemSusChem
- Vol. 15 (24)
Front Cover: Passive Daytime Radiative Cooling by Thermoplastic Polyurethane Wrapping Films with Controlled Hierarchical Porous Structures (ChemSusChem 24/2022)