Tomasz Nowakowski
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tomasz Nowakowski has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Paweł Komorski
Poznań University of Technology, Poland
7 shared publications - Grzegorz Marek Szymański
Institute of Transport, Poznan University of Technology, 60-965 Poznan, Poland
6 shared publications - Franciszek Tomaszewski
Poznan University of Technology, Faculty of Civil and Transport Engineering, Poznan, Poland
3 shared publications B. Czechyra
Department of Rail Vehicles, Poznan University of Technology, Poland
2 shared publications- Daniel Mokrzan
Institute of Transport, Poznan University of Technology, 60-965 Poznan, Poland
2 shared publications Franciszek Tomaszewski
Poznan University of Technology
2 shared publications
Latest Publications
- Open Access
- 10 November 2026
- Published by Springer Nature in Production Engineering
- Vol. 21 (1)
Integration of acoustic resonance testing for accelerated and cost-effective quality control of pins in screw coupling manufacturing
Modern railway manufacturing is under increasing pressure to reduce quality-control (QC) costs without compromising safety. This study investigates Acoustic Resonance Testing (ART) as a fast, non-destructive pre-screening method for detecting structural and material non-conformities in screw coupling pins, which are safety–critical components of 850 kN railway couplers. Eighteen heat-treated steel pins were evaluated using standard QC results and frequency response functions (FRFs), with rule-based and Random Forest classification. The rule-based classifier achieved 88.9% accuracy and detected six of eight NOK pins (NOK recall = 0.75). In a single six-pin test split, the Random Forest correctly classified five pins (83.3% accuracy), detecting both NOK pins and generating one false-positive NOK decision. These results provide preliminary pilot-scale evidence; 90 features and only 12 training pins pose a substantial overfitting risk and preclude reliable assessment of model stability. Economic modelling of Standard, ART, Hybrid and Full Skip strategies showed operational cost reductions of approximately 96.7% and processing-time reductions of 49.5% for Full Skip. Including initial investment, expenditure fell by 81.5% and 87.1% over 3 and 5 years. The scenarios assume that validated ART screening permits omission of routine hardness and laboratory testing; batch-level sensitivity analysis quantifies the effect of classification-error consequences. ART shows promise for pre-screening when combined with controlled excitation, independent validation, and risk-informed quality management.
- 10 November 2026
- Published by Springer Nature in Production Engineering
- Vol. 21 (1)
Open AccessIntegration of acoustic resonance testing for accelerated and cost-effective quality control of pins in screw coupling manufacturing
Modern railway manufacturing is under increasing pressure to reduce quality-control (QC) costs without compromising safety. This study investigates Acoustic Resonance Testing (ART) as a fast, non-destructive pre-screening method for detecting structural and material non-conformities in screw coupling pins, which are safety–critical components of 850 kN railway couplers. Eighteen heat-treated steel pins were evaluated using standard QC results and frequency response functions (FRFs), with rule-based and Random Forest classification. The rule-based classifier achieved 88.9% accuracy and detected six of eight NOK pins (NOK recall = 0.75). In a single six-pin test split, the Random Forest correctly classified five pins (83.3% accuracy), detecting both NOK pins and generating one false-positive NOK decision. These results provide preliminary pilot-scale evidence; 90 features and only 12 training pins pose a substantial overfitting risk and preclude reliable assessment of model stability. Economic modelling of Standard, ART, Hybrid and Full Skip strategies showed operational cost reductions of approximately 96.7% and processing-time reductions of 49.5% for Full Skip. Including initial investment, expenditure fell by 81.5% and 87.1% over 3 and 5 years. The scenarios assume that validated ART screening permits omission of routine hardness and laboratory testing; batch-level sensitivity analysis quantifies the effect of classification-error consequences. ART shows promise for pre-screening when combined with controlled excitation, independent validation, and risk-informed quality management.
- Open Access
- 29 September 2026
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 45, 2688-2707
Towards split Hopkinson pressure bar standardization — Interlaboratory comparison of experimental variability across routine practice
- 29 September 2026
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 45, 2688-2707
Open AccessTowards split Hopkinson pressure bar standardization — Interlaboratory comparison of experimental variability across routine practice
- Open Access
- 13 August 2026
- Published by Polish Scientific Society of Combustion Engines in Combustion Engines
- Vol. 207 (4) , 169-179
Analysis of the variability of daily and monthly exposure to aircraft noise depending on the fleet structure – example of the 737-800 and 737 MAX 8
Aircraft noise is one of the most significant environmental concerns around airports, generating both social conflicts and financial consequences. This study examined how the fleet composition influences daily exposure to aircraft noise in the vicinity of Poznań-Ławica Airport, focusing on two widely operated aircraft types: the Boeing 737-800 and the newer 737 MAX 8. Measurements were carried out at six monitoring points during 78 operations, and the analysis was based on the sound exposure level expressed on the physical scale and in decibels. The results show that the 737-800 consistently produces higher noise levels than the MAX 8, with mean LASel values of 0.89 Pa²·s (94.5 dB) compared to 0.57 Pa²·s (92.6 dB), a difference of 56%. The gap is particularly evident during take-off, where the 737-800 exceeds the MAX 8 by 137% (2.7 dB). Regression analysis confirmed a decreasing trend in SEL with increasing altitude; in the revised analysis, this dependence is modeled using a log-distance function in dB units, with altitude treated as a proxy for source–receiver distance. The simulation of nine fleet composition scenarios for a representative month showed that increasing the share of MAX 8 aircraft substantially reduces the number of days when the daily equivalent sound level (LAeqD) exceeds the legal threshold of 60 dB. Economic analysis using official Polish penalty tariffs for 2025 also showed that monthly environmental fines could be reduced by up to 69% if the fleet were fully modernised to MAX 8. Even partial renewal, with a 60–70% share of MAX 8, reduced costs by 60–70% relative to a fleet dominated by the 737-800. These findings highlight that fleet modernisation is a highly effective strategy for reducing community exposure to aircraft noise and mitigating the financial burden on airports, although the analysis was limited to daytime operations and one seasonal period.
- 13 August 2026
- Published by Polish Scientific Society of Combustion Engines in Combustion Engines
- Vol. 207 (4) , 169-179
Open AccessAnalysis of the variability of daily and monthly exposure to aircraft noise depending on the fleet structure – example of the 737-800 and 737 MAX 8
Aircraft noise is one of the most significant environmental concerns around airports, generating both social conflicts and financial consequences. This study examined how the fleet composition influences daily exposure to aircraft noise in the vicinity of Poznań-Ławica Airport, focusing on two widely operated aircraft types: the Boeing 737-800 and the newer 737 MAX 8. Measurements were carried out at six monitoring points during 78 operations, and the analysis was based on the sound exposure level expressed on the physical scale and in decibels. The results show that the 737-800 consistently produces higher noise levels than the MAX 8, with mean LASel values of 0.89 Pa²·s (94.5 dB) compared to 0.57 Pa²·s (92.6 dB), a difference of 56%. The gap is particularly evident during take-off, where the 737-800 exceeds the MAX 8 by 137% (2.7 dB). Regression analysis confirmed a decreasing trend in SEL with increasing altitude; in the revised analysis, this dependence is modeled using a log-distance function in dB units, with altitude treated as a proxy for source–receiver distance. The simulation of nine fleet composition scenarios for a representative month showed that increasing the share of MAX 8 aircraft substantially reduces the number of days when the daily equivalent sound level (LAeqD) exceeds the legal threshold of 60 dB. Economic analysis using official Polish penalty tariffs for 2025 also showed that monthly environmental fines could be reduced by up to 69% if the fleet were fully modernised to MAX 8. Even partial renewal, with a 60–70% share of MAX 8, reduced costs by 60–70% relative to a fleet dominated by the 737-800. These findings highlight that fleet modernisation is a highly effective strategy for reducing community exposure to aircraft noise and mitigating the financial burden on airports, although the analysis was limited to daytime operations and one seasonal period.
- Open Access
- 2 April 2026
- Published by Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne in Eksploatacja i Niezawodność – Maintenance and Reliability
Condition-Based Maintenance of Traction Motor Cooling Fans in EMUs: Case Study and Implementation Challenges
The transition from Time-Based Maintenance (TBM) to Condition-Based Maintenance (CBM) remains a challenge for the railway sector due to stringent safety regulations. This paper addresses this gap by presenting a framework for diagnostic monitoring of traction motor cooling fans in Electric Multiple Units. Using vibration analysis and adaptive statistical thresholds, the study demonstrates increased sensitivity compared to ISO 10816-3 limits. Research on 42 fans revealed that the proposed method achieved a 92.9% agreement with normative classifications while identifying early-stage degradations. A crucial part of the study is the formal analysis of change significance in accordance with the 402/2013 (CSM RA) regulation, providing a systematic approach to managing safety risks during technology implementation. The article provides a practical roadmap for integrating this 19-minute procedure into routine light maintenance, offering a scalable solution to overcome formal and technical barriers in adopting predictive maintenance for safety-critical systems.
- 2 April 2026
- Published by Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne in Eksploatacja i Niezawodność – Maintenance and Reliability
Open AccessCondition-Based Maintenance of Traction Motor Cooling Fans in EMUs: Case Study and Implementation Challenges
The transition from Time-Based Maintenance (TBM) to Condition-Based Maintenance (CBM) remains a challenge for the railway sector due to stringent safety regulations. This paper addresses this gap by presenting a framework for diagnostic monitoring of traction motor cooling fans in Electric Multiple Units. Using vibration analysis and adaptive statistical thresholds, the study demonstrates increased sensitivity compared to ISO 10816-3 limits. Research on 42 fans revealed that the proposed method achieved a 92.9% agreement with normative classifications while identifying early-stage degradations. A crucial part of the study is the formal analysis of change significance in accordance with the 402/2013 (CSM RA) regulation, providing a systematic approach to managing safety risks during technology implementation. The article provides a practical roadmap for integrating this 19-minute procedure into routine light maintenance, offering a scalable solution to overcome formal and technical barriers in adopting predictive maintenance for safety-critical systems.
- Open Access
- 18 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (4) , 2017
Vibroacoustic Methods for Wheel-Flat Detection: Toward Safer and More Energy-Efficient Rail Transport—A Review
Flat spots on railway wheels critically threaten operational safety, accelerating track damage, noise pollution, and energy waste. Their repetitive, high-magnitude impacts dissipate mechanical energy as ground vibration and noise, directly reducing traction efficiency. This paper presents a comprehensive review of recent vibration and acoustic detection methods, comparing onboard and stationary wayside systems. The literature from 2019 to 2025 shows a trend toward machine learning and deep learning, often reaching nearly 100% accuracy in laboratory or simulated settings. However, most studies lack real-world validation with naturally occurring defects. Bridging this gap requires industry–academic collaboration for operational data and testing. Crucially, systems must classify defect severity in line with maintenance thresholds rather than focus on minor, non-actionable faults. Integrating these technologies into condition-based maintenance and predictive digital twins will enable optimization of scheduling and work orders. Future efforts should leverage edge computing for real-time analysis, federated learning for data scarcity, and energy harvesting for sensor autonomy. The goal is to develop field-validated, integrated systems that enhance safety, reduce energy loss, and improve reliability.
- 18 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (4) , 2017
Open AccessVibroacoustic Methods for Wheel-Flat Detection: Toward Safer and More Energy-Efficient Rail Transport—A Review
Flat spots on railway wheels critically threaten operational safety, accelerating track damage, noise pollution, and energy waste. Their repetitive, high-magnitude impacts dissipate mechanical energy as ground vibration and noise, directly reducing traction efficiency. This paper presents a comprehensive review of recent vibration and acoustic detection methods, comparing onboard and stationary wayside systems. The literature from 2019 to 2025 shows a trend toward machine learning and deep learning, often reaching nearly 100% accuracy in laboratory or simulated settings. However, most studies lack real-world validation with naturally occurring defects. Bridging this gap requires industry–academic collaboration for operational data and testing. Crucially, systems must classify defect severity in line with maintenance thresholds rather than focus on minor, non-actionable faults. Integrating these technologies into condition-based maintenance and predictive digital twins will enable optimization of scheduling and work orders. Future efforts should leverage edge computing for real-time analysis, federated learning for data scarcity, and energy harvesting for sensor autonomy. The goal is to develop field-validated, integrated systems that enhance safety, reduce energy loss, and improve reliability.
- Open Access
- 15 July 2025
- Published by Elsevier in Measurement
- Vol. 256
A new roller rig for real-time wheel-rail wear measurement using infrared imaging
- 15 July 2025
- Published by Elsevier in Measurement
- Vol. 256
Open AccessA new roller rig for real-time wheel-rail wear measurement using infrared imaging
- Open Access
- 4 May 2024
- Published by Lukasiewicz Research Network - Poznan Technology Institute in Rail Vehicles/Pojazdy Szynowe
- No. 1-2,p. 30-38
Concept for an innovative screw coupling system production process
The article presents the concept of an innovative approach to the production of a screw coupling system, a key element in rail vehicles. The use of ready-made components from various subsuppliers, combined with new quality control methods, offers an opportunity for a significant reduction in cost and production time while increasing the efficiency and flexibility of the process. Key stages of the production process are highlighted, from the selection of semifinished products, through quality control, to the final assembly and validation. The applied strategies can minimise waste, increase material efficiency, and have a positive impact on the environment. This study constitutes a significant contribution to the development of sustainable production in the railway industry, with an emphasis on organisational, process, and product innovations.
- 4 May 2024
- Published by Lukasiewicz Research Network - Poznan Technology Institute in Rail Vehicles/Pojazdy Szynowe
- No. 1-2,p. 30-38
Open AccessConcept for an innovative screw coupling system production process
The article presents the concept of an innovative approach to the production of a screw coupling system, a key element in rail vehicles. The use of ready-made components from various subsuppliers, combined with new quality control methods, offers an opportunity for a significant reduction in cost and production time while increasing the efficiency and flexibility of the process. Key stages of the production process are highlighted, from the selection of semifinished products, through quality control, to the final assembly and validation. The applied strategies can minimise waste, increase material efficiency, and have a positive impact on the environment. This study constitutes a significant contribution to the development of sustainable production in the railway industry, with an emphasis on organisational, process, and product innovations.
- Open Access
- 20 March 2024
- Published by Universiti Malaysia Pahang Al-Sultan Abdullah Press (UMPSA Press) in International Journal of Automotive and Mechanical Engineering
- Vol. 21 (1) , 10953-10967
Application of Multiresolution Analysis Wavelet Decomposition of Vibration Signals in the Condition Monitoring of Car Suspension
The article addresses the issue of increasing the diagnostic capabilities of the car's suspension in the EUSAMA test. A new, quantitative approach was proposed to enable the assessment of the degree of wear and clearance of the lower suspension mount. An active diagnostic experiment was performed to model the clearance in the lower suspension mounting. During the research, bolts with different diameters were used. In the signal analysis, wavelet decomposition into 12 levels was performed using the Db4 wavelet. The resonance area of the system was extracted from an approximate signal, which contained 43.5% of the relative energy. From these signals, a number of point vibration measures were calculated. Finally, the maximum value was selected due to its sensitivity to the condition, which was 48% more than the original EUSAMA results. Based on the selected diagnostic parameter, a clearance model allowing for an assessment of the clearance with statistically significant coefficients was developed.
- 20 March 2024
- Published by Universiti Malaysia Pahang Al-Sultan Abdullah Press (UMPSA Press) in International Journal of Automotive and Mechanical Engineering
- Vol. 21 (1) , 10953-10967
Open AccessApplication of Multiresolution Analysis Wavelet Decomposition of Vibration Signals in the Condition Monitoring of Car Suspension
The article addresses the issue of increasing the diagnostic capabilities of the car's suspension in the EUSAMA test. A new, quantitative approach was proposed to enable the assessment of the degree of wear and clearance of the lower suspension mount. An active diagnostic experiment was performed to model the clearance in the lower suspension mounting. During the research, bolts with different diameters were used. In the signal analysis, wavelet decomposition into 12 levels was performed using the Db4 wavelet. The resonance area of the system was extracted from an approximate signal, which contained 43.5% of the relative energy. From these signals, a number of point vibration measures were calculated. Finally, the maximum value was selected due to its sensitivity to the condition, which was 48% more than the original EUSAMA results. Based on the selected diagnostic parameter, a clearance model allowing for an assessment of the clearance with statistically significant coefficients was developed.
- 28 February 2024
- Published by Elsevier in Applied Acoustics
- Vol. 219
Tram noise annoyance: The role of different psychoacoustic measures in the assessment of noise
- 28 February 2024
- Published by Elsevier in Applied Acoustics
- Vol. 219
Tram noise annoyance: The role of different psychoacoustic measures in the assessment of noise
- Open Access
- 24 November 2023
- Published by Politechnika Warszawska - Warsaw University of Technology in Archives of Transport
- Vol. 68 (4) , 55-75
The application of time-frequency methods of acoustic signal processing in the diagnostics of tram drive components
The paper presents the course of investigations and the analysis of the possibility of applying selected methods of time-frequency processing of non-stationary acoustic signals in the assessment of the technical condition of tram drive components, as well as a new combined method proposed by the authors. An experiment was performed in the form of a pass-by test of the acoustic pressure generated by a Solaris Tramino S105p tram. A comparative analysis has been carried out for an efficient case and a case with damage to the traction gear of the third bogie in the form of broken gear teeth. The recorded signal was analyzed using short-time Fourier transform (STFT) and continuous wavelet transform (CWT). It was found that the gear failure causes an increase in the sound level generated by a given bogie for frequencies within the range of characteristic frequencies of the tested device. Due to the limitations associated with the fixed window resolution in STFT and the inability to directly translate scales to frequencies in CWT, it was found that these methods can be helpful in determining suspected damage, but are too imprecise and prone to errors when the parameters of both transforms are poorly chosen. A new CWT-Cepstrum method was proposed as a solution, using the wavelet transform as a pre-filter before cepstrum signal processing. With a sampling rate of 8192 Hz, a db6 mother wavelet, and a scale range of 1:200, the new method was found to infer the occurrence of damage in an interpretation-free manner. The results were validated on an independent pair of trams of the same model with identical damage and as a reference on a pair of undamaged trams demonstrating that the method can be successfully replicated for different vehicles.
- 24 November 2023
- Published by Politechnika Warszawska - Warsaw University of Technology in Archives of Transport
- Vol. 68 (4) , 55-75
Open AccessThe application of time-frequency methods of acoustic signal processing in the diagnostics of tram drive components
The paper presents the course of investigations and the analysis of the possibility of applying selected methods of time-frequency processing of non-stationary acoustic signals in the assessment of the technical condition of tram drive components, as well as a new combined method proposed by the authors. An experiment was performed in the form of a pass-by test of the acoustic pressure generated by a Solaris Tramino S105p tram. A comparative analysis has been carried out for an efficient case and a case with damage to the traction gear of the third bogie in the form of broken gear teeth. The recorded signal was analyzed using short-time Fourier transform (STFT) and continuous wavelet transform (CWT). It was found that the gear failure causes an increase in the sound level generated by a given bogie for frequencies within the range of characteristic frequencies of the tested device. Due to the limitations associated with the fixed window resolution in STFT and the inability to directly translate scales to frequencies in CWT, it was found that these methods can be helpful in determining suspected damage, but are too imprecise and prone to errors when the parameters of both transforms are poorly chosen. A new CWT-Cepstrum method was proposed as a solution, using the wavelet transform as a pre-filter before cepstrum signal processing. With a sampling rate of 8192 Hz, a db6 mother wavelet, and a scale range of 1:200, the new method was found to infer the occurrence of damage in an interpretation-free manner. The results were validated on an independent pair of trams of the same model with identical damage and as a reference on a pair of undamaged trams demonstrating that the method can be successfully replicated for different vehicles.