Qiushi Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qiushi Huang has a total of 265 co-authors. Here are the top co-authors by number of shared publications:
- Zhanshan Wang
Tongji University
49 shared publications Zhong Zhang
33 shared publicationsRunze Qi
Tongji University
18 shared publicationsZhanshan Wang
13 shared publications- Zhong Zhang
Institute of Precision Optical Engineering, School of Physics Science and Engineering, Tongji University, Shanghai 200092, China
12 shared publications - Runze Qi
MOE Key Laboratory of Advanced Micro-Structured Materials, Institute of Precision Optical Engineering (IPOE), School of Physics Science and Engineering, Tongji University, Shanghai 200092, China
11 shared publications
Latest Publications
- 16 November 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (20)
Incoherent light-induced periodic surface structures on EUV Mo/Si multilayers
Conventional intense coherent laser radiation can induce periodic surface structures, offering a promising route for advanced nanofabrication. However, whether incoherent short-wavelength radiation can drive such self-organized pattern formation remains an open question. Here, we report incoherent light-induced periodic surface structures (ICLIPSSs) on Mo/Si multilayers irradiated by nanosecond 13.5 nm extreme ultraviolet (EUV) pulse from a laser-produced plasma source. The irradiated surface exhibits radially distributed nanostructures with a constant period of ∼58 nm over a broad fluence range, while the amplitude increases with fluence and the morphology evolves from sinusoidal wrinkles to asymmetric ridge-groove features. We attribute this behavior to transient thin-film wrinkling driven by compaction-induced in-plane compressive stress in a stiff surface layer. The Ru capping layer suppresses ICLIPSS by enhancing near-surface EUV absorption and affecting cross-plane heat transport, thereby altering the transient mechanical state required for wrinkling. These findings deepen our understanding of EUV-induced pattern formation in multilayers and suggest a new route for nanoscale surface structuring using incoherent short-wavelength light.
- 16 November 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (20)
Incoherent light-induced periodic surface structures on EUV Mo/Si multilayers
Conventional intense coherent laser radiation can induce periodic surface structures, offering a promising route for advanced nanofabrication. However, whether incoherent short-wavelength radiation can drive such self-organized pattern formation remains an open question. Here, we report incoherent light-induced periodic surface structures (ICLIPSSs) on Mo/Si multilayers irradiated by nanosecond 13.5 nm extreme ultraviolet (EUV) pulse from a laser-produced plasma source. The irradiated surface exhibits radially distributed nanostructures with a constant period of ∼58 nm over a broad fluence range, while the amplitude increases with fluence and the morphology evolves from sinusoidal wrinkles to asymmetric ridge-groove features. We attribute this behavior to transient thin-film wrinkling driven by compaction-induced in-plane compressive stress in a stiff surface layer. The Ru capping layer suppresses ICLIPSS by enhancing near-surface EUV absorption and affecting cross-plane heat transport, thereby altering the transient mechanical state required for wrinkling. These findings deepen our understanding of EUV-induced pattern formation in multilayers and suggest a new route for nanoscale surface structuring using incoherent short-wavelength light.
- 9 November 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (23) , 44286
Fabrication and characterization of multi-shell nested fully annular quasi-ellipsoidal focusing mirrors with m = 3 supermirrors for small-angle neutron scattering
Small-angle neutron scattering (SANS) measurements require sufficient neutron intensity, which remains a major limitation for instruments based on compact neutron sources. Grazing-incidence focusing optics provide a potential means of improving neutron utilization, thereby enabling compact sources to complement large-scale reactor and spallation facilities more effectively. In this study, a seven-shell nested fully annular quasi-ellipsoidal focusing mirror system with m = 3 Ni/Ti neutron supermirrors was developed for the CPHS grazing-incidence focusing SANS spectrometer. The system comprises 168 thin-glass mirror segments fabricated through thermal forming, magnetron sputtering and mandrel-referenced integrated assembly. Optical metrology and virtual mounting simulations were performed to evaluate the effects of fabrication and assembly errors. Under point-source illumination, the simulated half-power diameter increased from 1.334 mm for ideal surfaces to 2.352 mm when the in situ measured surface errors were included, while simulations with source diameters of 10-50 mm demonstrated good adaptability to different source sizes. Beamline measurements using a 29 mm diameter source aperture yielded D(W50), D(W90) and D(W99) values of 22.62, 33.41 and 47.24 mm, respectively. The wavelength-dependent spectral intensity gain, evaluated within a 25.0 mm diameter region centred on the nominal detector, reached a plateau of approximately 250 at longer wavelengths. In addition, five post-collimation aperture blades reduced the off-axis stray-neutron flux by approximately one order of magnitude. These results demonstrate that multi-shell fully annular focusing mirrors can substantially improve neutron collection while maintaining acceptable focal-spot dimensions, providing a practical route for compact SANS instruments to complement large neutron facilities through more flexible access and efficient use of limited neutron flux.
- 9 November 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (23) , 44286
Fabrication and characterization of multi-shell nested fully annular quasi-ellipsoidal focusing mirrors with m = 3 supermirrors for small-angle neutron scattering
Small-angle neutron scattering (SANS) measurements require sufficient neutron intensity, which remains a major limitation for instruments based on compact neutron sources. Grazing-incidence focusing optics provide a potential means of improving neutron utilization, thereby enabling compact sources to complement large-scale reactor and spallation facilities more effectively. In this study, a seven-shell nested fully annular quasi-ellipsoidal focusing mirror system with m = 3 Ni/Ti neutron supermirrors was developed for the CPHS grazing-incidence focusing SANS spectrometer. The system comprises 168 thin-glass mirror segments fabricated through thermal forming, magnetron sputtering and mandrel-referenced integrated assembly. Optical metrology and virtual mounting simulations were performed to evaluate the effects of fabrication and assembly errors. Under point-source illumination, the simulated half-power diameter increased from 1.334 mm for ideal surfaces to 2.352 mm when the in situ measured surface errors were included, while simulations with source diameters of 10-50 mm demonstrated good adaptability to different source sizes. Beamline measurements using a 29 mm diameter source aperture yielded D(W50), D(W90) and D(W99) values of 22.62, 33.41 and 47.24 mm, respectively. The wavelength-dependent spectral intensity gain, evaluated within a 25.0 mm diameter region centred on the nominal detector, reached a plateau of approximately 250 at longer wavelengths. In addition, five post-collimation aperture blades reduced the off-axis stray-neutron flux by approximately one order of magnitude. These results demonstrate that multi-shell fully annular focusing mirrors can substantially improve neutron collection while maintaining acceptable focal-spot dimensions, providing a practical route for compact SANS instruments to complement large neutron facilities through more flexible access and efficient use of limited neutron flux.
- Open Access
- 9 September 2026
- Published by IOP Publishing in Materials Research Express
- Vol. 13 (17) , 176401
Effects of Ar and Kr sputtering gas on the interfaces and micro-structure of Ni/Ti multilayer
The effect of sputtering gas, particularly the generation of energetic recoil particles, is crucial in determining interfaces and microstructural evolution of magnetron-sputtered thin films. This is especially critical for nanoscale Ni/Ti multilayers, which are core components in advanced neutron mirrors. In this work, the modulation of the interface and layer structure in Ni/Ti multilayers was comparatively investigated by varying the sputtering gas using Ar and Kr. TRIM simulations reveal that using a heavier sputtering gas (Kr) significantly reduces the energy and number of recoil particles. Comprehensive characterizations using GIXRR, diffuse scattering, XRD, and TEM demonstrate a physical trade-off: the Ar-sputtered multilayer is found to exhibit approximately 1.5 times lower interface roughness (RMS), while it shows stronger Ni (111) crystallization and larger interdiffusion. Conversely, replacing Ar with Kr reduced the crystallization and atomic intermixing, despite the relatively larger interface roughness. These findings provide useful guidance for mitigating interface defects and optimizing the fabrication of high-performance multilayer optics.
- 9 September 2026
- Published by IOP Publishing in Materials Research Express
- Vol. 13 (17) , 176401
Open AccessEffects of Ar and Kr sputtering gas on the interfaces and micro-structure of Ni/Ti multilayer
The effect of sputtering gas, particularly the generation of energetic recoil particles, is crucial in determining interfaces and microstructural evolution of magnetron-sputtered thin films. This is especially critical for nanoscale Ni/Ti multilayers, which are core components in advanced neutron mirrors. In this work, the modulation of the interface and layer structure in Ni/Ti multilayers was comparatively investigated by varying the sputtering gas using Ar and Kr. TRIM simulations reveal that using a heavier sputtering gas (Kr) significantly reduces the energy and number of recoil particles. Comprehensive characterizations using GIXRR, diffuse scattering, XRD, and TEM demonstrate a physical trade-off: the Ar-sputtered multilayer is found to exhibit approximately 1.5 times lower interface roughness (RMS), while it shows stronger Ni (111) crystallization and larger interdiffusion. Conversely, replacing Ar with Kr reduced the crystallization and atomic intermixing, despite the relatively larger interface roughness. These findings provide useful guidance for mitigating interface defects and optimizing the fabrication of high-performance multilayer optics.
- Open Access
- 1 September 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (9)
Damage study on B4C mirrors induced by single-shot x-ray free electron laser at SXFEL
Boron carbide (B4C) is widely used as a coating material for x-ray optics in X-ray Free Electron Laser (XFEL) beamlines. In this study, single-shot damage experiments were conducted on B4C/Si-sub and B4C/Cr/Si-sub mirrors at 517 eV using the Shanghai Soft x-ray free electron laser. The damage thresholds were determined to be 0.49 ± 0.13 and 0.32 ± 0.08 J/cm2 for B4C/Si-sub and B4C/Cr/Si-sub, respectively. Morphological and microstructural characterizations reveal that XFEL-induced damage in both samples is closely related to thermal melting of the Si substrate. Based on the silicon melting criterion, the theoretical damage threshold simulated by the finite element method for B4C/Si-sub is in good agreement with the experimental result. The bump damage morphology observed at a fluence of 0.66 J/cm2 for this sample is attributed to the volumetric expansion of the molten Si substrate. In contrast, the silicon melting criterion overestimates the damage threshold for the B4C mirror with a Cr adhesive layer. The lower experimental threshold of B4C/Cr/Si-sub is attributed to the interfacial diffusion reaction and the femtosecond XFEL-induced cavitation, which leads to a more readily observable damage morphology.
- 1 September 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (9)
Open AccessDamage study on B4C mirrors induced by single-shot x-ray free electron laser at SXFEL
Boron carbide (B4C) is widely used as a coating material for x-ray optics in X-ray Free Electron Laser (XFEL) beamlines. In this study, single-shot damage experiments were conducted on B4C/Si-sub and B4C/Cr/Si-sub mirrors at 517 eV using the Shanghai Soft x-ray free electron laser. The damage thresholds were determined to be 0.49 ± 0.13 and 0.32 ± 0.08 J/cm2 for B4C/Si-sub and B4C/Cr/Si-sub, respectively. Morphological and microstructural characterizations reveal that XFEL-induced damage in both samples is closely related to thermal melting of the Si substrate. Based on the silicon melting criterion, the theoretical damage threshold simulated by the finite element method for B4C/Si-sub is in good agreement with the experimental result. The bump damage morphology observed at a fluence of 0.66 J/cm2 for this sample is attributed to the volumetric expansion of the molten Si substrate. In contrast, the silicon melting criterion overestimates the damage threshold for the B4C mirror with a Cr adhesive layer. The lower experimental threshold of B4C/Cr/Si-sub is attributed to the interfacial diffusion reaction and the femtosecond XFEL-induced cavitation, which leads to a more readily observable damage morphology.
- 22 July 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (4)
Experimental protocol for single-shot irradiation studies on optical materials at the SXFEL facility
Ultra-intense and ultra-short x-ray free-electron lasers (XFELs) impose rigorous requirements on the damage resistance of optical materials. The investigations of interactions between XFELs and optical materials are vital for both evaluating the durability of optical components applied in XFEL beamlines and elucidating the fundamental physics of light–matter interaction under extreme conditions. In this paper, we report an experimental protocol for single-shot irradiation studies on optical materials at the Shanghai Soft X-ray Free-Electron Laser (SXFEL) facility, including detailed descriptions of the XFEL beamline layout, experimental setup, incident angle calibration, pulse-energy measurement, focused FEL spot size characterization, and irradiation procedures. Following this experimental protocol, single-shot irradiation was performed on a Si wafer at the SXFEL under normal incidence. A damage threshold of 0.22 ± 0.06 J/cm2 was determined at a photon energy of 517 eV. It is in good agreement with the fluence calculated based on the melting dose of Si, confirming thermal ablation as the dominant damage mechanism.
- 22 July 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (4)
Experimental protocol for single-shot irradiation studies on optical materials at the SXFEL facility
Ultra-intense and ultra-short x-ray free-electron lasers (XFELs) impose rigorous requirements on the damage resistance of optical materials. The investigations of interactions between XFELs and optical materials are vital for both evaluating the durability of optical components applied in XFEL beamlines and elucidating the fundamental physics of light–matter interaction under extreme conditions. In this paper, we report an experimental protocol for single-shot irradiation studies on optical materials at the Shanghai Soft X-ray Free-Electron Laser (SXFEL) facility, including detailed descriptions of the XFEL beamline layout, experimental setup, incident angle calibration, pulse-energy measurement, focused FEL spot size characterization, and irradiation procedures. Following this experimental protocol, single-shot irradiation was performed on a Si wafer at the SXFEL under normal incidence. A damage threshold of 0.22 ± 0.06 J/cm2 was determined at a photon energy of 517 eV. It is in good agreement with the fluence calculated based on the melting dose of Si, confirming thermal ablation as the dominant damage mechanism.
- 23 June 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (13) , 24155-24166
Ultimate spectral purity of the tender X-ray radiation diffracted from a wideband multilayer coated blazed grating
What we believe to be a novel approach is proposed and theoretically justified to achieve the extremely high spectral purity and high diffraction efficiency of a wideband multilayer-coated blazed grating (BMG) in the tender X-ray range (2.5-3 keV photon energy). The key feature consists of depositing a 70 nm thick B 4 C film on the BMG surface with subsequent removal of the saw-tooth relief by polishing. Such a design allows suppressing the low-energy parasitic radiation intensity by a factor exceeding 10 4 on the grating surface through reflection from the film in the total external reflection conditions. A high diffraction efficiency of 8-21% for the -2 nd order can be achieved at the same time.
- 23 June 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (13) , 24155-24166
Ultimate spectral purity of the tender X-ray radiation diffracted from a wideband multilayer coated blazed grating
What we believe to be a novel approach is proposed and theoretically justified to achieve the extremely high spectral purity and high diffraction efficiency of a wideband multilayer-coated blazed grating (BMG) in the tender X-ray range (2.5-3 keV photon energy). The key feature consists of depositing a 70 nm thick B 4 C film on the BMG surface with subsequent removal of the saw-tooth relief by polishing. Such a design allows suppressing the low-energy parasitic radiation intensity by a factor exceeding 10 4 on the grating surface through reflection from the film in the total external reflection conditions. A high diffraction efficiency of 8-21% for the -2 nd order can be achieved at the same time.
- 13 April 2026
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (12) , 3895-3901
Characterization and fabrication of high-performance B 4 C-coated mirrors for X-ray free-electron lasers
The internal layer structure and optical performance of B 4 C coating for X-ray free-electron laser (XFEL) applications were studied. Surface morphology analysis shows that the B 4 C layer growth at 5 mTorr replicates the substrate morphology at low and mid frequencies but adds slight high-frequency roughness, with the RMS value increasing from 0.13 to 0.33 nm. To investigate the internal physical and chemical structure of B 4 C, angle-resolved X-ray photoelectron spectroscopy (ARXPS) and depth profiling were performed. Together with soft X-ray (SXR) and hard X-ray (HXR) reflectivity measurements and the fitted results, a three-sublayer model with different composition and density was built for the 50 nm B 4 C coating. The developed B 4 C coating was further deposited on a 600 mm length mirror with a thickness variation of 0.7 nm (peak-to-valley). The radius of curvature changed slightly from 181 km before coating to 128 km after coating, and the slope errors were maintained at around 0.07 µrad, indicating a high-performance and large-size B 4 C coating for the XFEL.
- 13 April 2026
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (12) , 3895-3901
Characterization and fabrication of high-performance B 4 C-coated mirrors for X-ray free-electron lasers
The internal layer structure and optical performance of B 4 C coating for X-ray free-electron laser (XFEL) applications were studied. Surface morphology analysis shows that the B 4 C layer growth at 5 mTorr replicates the substrate morphology at low and mid frequencies but adds slight high-frequency roughness, with the RMS value increasing from 0.13 to 0.33 nm. To investigate the internal physical and chemical structure of B 4 C, angle-resolved X-ray photoelectron spectroscopy (ARXPS) and depth profiling were performed. Together with soft X-ray (SXR) and hard X-ray (HXR) reflectivity measurements and the fitted results, a three-sublayer model with different composition and density was built for the 50 nm B 4 C coating. The developed B 4 C coating was further deposited on a 600 mm length mirror with a thickness variation of 0.7 nm (peak-to-valley). The radius of curvature changed slightly from 181 km before coating to 128 km after coating, and the slope errors were maintained at around 0.07 µrad, indicating a high-performance and large-size B 4 C coating for the XFEL.
- 8 March 2026
- Published by Springer Nature in Advances in Manufacturing
- Vol. 14 (4) , 791-808
High-precision two-dimensional figuring of X-ray mirrors using an elliptical ion beam in a single-axis motion system
- 8 March 2026
- Published by Springer Nature in Advances in Manufacturing
- Vol. 14 (4) , 791-808
High-precision two-dimensional figuring of X-ray mirrors using an elliptical ion beam in a single-axis motion system
- Open Access
- 21 January 2026
- Published by Springer Nature in Light: Science & Applications
- Vol. 15 (1) , 76
TRIXS: a multilayer grating solution towards highly efficient resonant inelastic tender X-ray scattering
Resonant inelastic X-ray scattering (RIXS) is a photon-in/photon-out spectroscopic technique which has become increasingly important for the condensed matter physics community. The development of the RIXS instrumentation in soft X-ray and hard X-ray range facilitated the research in 3 d and 5 d transition metal (TM)-based materials, respectively. However, the tender X-ray (2000–3000 eV) RIXS covering most of 4 d TM-based materials severely falls behind due to the lack of high-performance energy dispersive optics. Here, we demonstrate the design and fabrication of a laterally graded multilayer grating (MLG) optics for the establishment of the tender RIXS at the I21 RIXS beamline in Diamond Light Source. The successful implementation of the MLG boosts the photon flux by more than an order of magnitude at the Sulfur K -edge (2475 eV) and the Ru L 3 -edge (2838 eV) in comparison to the solution of a single-layer coated grating (SLG). More importantly, MLG retains the high energy resolution of the SLG design (~10,000) and works continuously across the full range of 2000–3000 eV. It renders the I21 beamline as the very first RIXS facility in the world that covers both soft and tender X-rays (280–3000 eV) using a grating-based spectrometer for a wide range of science applications.
- 21 January 2026
- Published by Springer Nature in Light: Science & Applications
- Vol. 15 (1) , 76
Open AccessTRIXS: a multilayer grating solution towards highly efficient resonant inelastic tender X-ray scattering
Resonant inelastic X-ray scattering (RIXS) is a photon-in/photon-out spectroscopic technique which has become increasingly important for the condensed matter physics community. The development of the RIXS instrumentation in soft X-ray and hard X-ray range facilitated the research in 3 d and 5 d transition metal (TM)-based materials, respectively. However, the tender X-ray (2000–3000 eV) RIXS covering most of 4 d TM-based materials severely falls behind due to the lack of high-performance energy dispersive optics. Here, we demonstrate the design and fabrication of a laterally graded multilayer grating (MLG) optics for the establishment of the tender RIXS at the I21 RIXS beamline in Diamond Light Source. The successful implementation of the MLG boosts the photon flux by more than an order of magnitude at the Sulfur K -edge (2475 eV) and the Ru L 3 -edge (2838 eV) in comparison to the solution of a single-layer coated grating (SLG). More importantly, MLG retains the high energy resolution of the SLG design (~10,000) and works continuously across the full range of 2000–3000 eV. It renders the I21 beamline as the very first RIXS facility in the world that covers both soft and tender X-rays (280–3000 eV) using a grating-based spectrometer for a wide range of science applications.
- 17 January 2026
- Published by Elsevier in Applied Surface Science
- Vol. 727
Evolution of ultrasmooth Si surface under scanning Ar ion beam etching with contamination
- 17 January 2026
- Published by Elsevier in Applied Surface Science
- Vol. 727
Evolution of ultrasmooth Si surface under scanning Ar ion beam etching with contamination