Afonso Filipe João has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evaluation of Heavy Metal Content in Plastic Bags Used as Improvised Food Cooking Covers: A Case Study from the Mozambican Community

    by Manença Cristiano Nhanga, Dulce Geraldo, Sérgio Leonardo Nhapulo, Afonso Filipe João, Joaquim Carneiro, Manuel F. M. Costa

    The widespread use of plastic bags as improvised food cooking covers in Mozambican communities has raised public health concerns, increasing interest in studying these plastic bags, which contain heavy metals additives used to improve their physical and chemical properties. This study aims to evaluate the levels of heavy metals commonly used in plastic bags used as improvised food cooking covers, focused on Mozambican communities that have this habit. Using spectroscopic techniques, Fourier Transform Infrared Spectroscopy (FTIR) and Atomic Absorption Spectroscopy (AAS), we analyzed plastic bag samples to identify polymer types, chemical composition, and heavy metal concentrations. FTIR analysis confirmed low- and high-density polyethylene (LDPE and HDPE) as the primary materials, with spectra peaks between 2800 and 3000 cm−1, indicating stretching vibrations characteristic of LDPE and HDPE. The density measurements varied between 0.04 and 0.08 g/cm3 with very low uncertainty values (0.27% and 0.098%). The heavy metal analysis revealed concentrations higher than those stipulated in international standards. The results in terms of the percentage of LDPE samples in relation to the HDPE samples are as follows: Cd: 69.71% (LDPE < HDPE); Cu: 220.44% (LDPE > HDPE); Pb: 24% (LDPE < HDPE); and Zn: 51.53% (LDPE < HDPE). These findings highlight the potential public health risks associated with the use of plastic bags in cooking and underscore the need for regulatory intervention.


  • Additive-manufactured sensors for biofuel analysis: copper determination in bioethanol using a 3D-printed carbon black/polylactic electrode

    by Afonso F. João, André L. Squissato, Eduardo M. Richter, Rodrigo A. A. Muñoz

    We show that fused deposition modelling (FDM) 3D-printed electrodes can be used for quality control of fuel bioethanol. 3D-printing using carbon black/polylactic acid (CB-PLA) filaments resulted in conductive and biodegradable electrodes for biofuel analysis. As a proof-of-concept, copper determination in fuel bioethanol was performed, as such ions catalyse oxidation processes during storage and transport. Square-wave anodic-stripping voltammetry (SWASV) of copper was achieved after sample dilution in 0.1 mol L−1 HCl as supporting electrolyte (resulting in 30:70% v/v ethanol:water). The linear responses were in the range between 10 and 300 μg L−1 (R = 0.999), inter-day precision was lower than 8% (n = 10, for 20 μg L−1) and limits of detection (LOD) and quantification (LOQ) using 180 s as deposition time were 0.097 μg L−1 and 0.323 μg L−1, respectively. Recovery values between 95 and 103% for the analysis of bioethanol spiked with known amounts of copper were obtained. These results show great promise of the application of 3D-printed sensors for the quality control of biofuels. Graphical abstract


  • Potential of Mafura seed oil as a feedstock for biodiesel production

    by Afonso F. João, André L. Squissato, Michelle M. A. C. Ribeiro, Eduardo M. Richter, Anízio M. Faria, Rodrigo A. A. Muñoz

    Environmental concerns caused by the constant use of fossil fuels can be solved by the use of biofuels. This work shows the application of the oil of Trichilia emetica Vahl (Mafura) seeds originating from Mozambique as a feedstock for biodiesel production. The high oil acidity required a two-step reaction involving esterification using sulphuric acid (H2SO4) as catalyst followed by for the conversion of Mafura oil to fatty acid methyl ester (FAME). The acid value was reduced from 27.58 to 0.36 (mg KOH g−1). Other physicochemical properties (moisture content, density, free glycerol) of FAME attended the established limits of EN14214 and Brazilian norms. The low induction-period (IP) was surpassed after the addition of 500 ppm of the synthetic antioxidant tert-butylhydroquinone (TBHQ) resulting in 10.8 h. The conversion of the feedstock (99.1%wt) was confirmed by gas chromatograph with flame ionization detector (GC-FID). The fatty-acid methyl ester contents of the Mafura biodiesel presented palmitic acid (39.32%wt), linoleic acid (31.09%wt), oleic acid (25.77%wt), stearic acid (2.29%wt), meristic acid (0.78%wt), linolenic acid (0.61%wt) and lauric acid (0.14%wt). These results show that the biodiesel produced from Mafura oil met most of the quality standards required by American, Brazilian and European regulatory agencies.


  • Iron (III) determination in bioethanol fuel using a smartphone-based device

    by Afonso Filipe João, André Luiz Squissato, Gabriel M. Fernandes, Rafael M. Cardoso, Alex D. Batista, Rodrigo A.A. Muñoz