Wei Sun Leong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Wei Sun Leong has a total of 91 co-authors. Here are the top co-authors by number of shared publications:
Jing Kong
Department of Electrical Engineering and Computer Sciences Massachusetts Institute of Technology Cambridge MA 02139 USA
3 shared publications- John Thiam-Leong Thong
Department of Electrical and Computer Engineering National University of Singapore Singapore 117583 Republic of Singapore
3 shared publications - Yida Li
Southern University of Science and Technology
3 shared publications Chang Tai Nai
Department of Chemistry, National University of Singapore, Singapore 117543
2 shared publications- Hao Gong
Department of Materials Science and Engineering, National University of Singapore, Singapore 117543, Singapore
2 shared publications Haozhe Wang
Department of Electrical Engineering and Computer Sciences Massachusetts Institute of Technology Cambridge MA 02139 USA
2 shared publications
Latest Publications
- Open Access
- 9 November 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (11) , 3008
Nanocellulose-Based Materials for Water Treatment: Adsorption, Photocatalytic Degradation, Disinfection, Antifouling, and Nanofiltration
Nanocelluloses are promising bio-nano-materials for use as water treatment materials in environmental protection and remediation. Over the past decades, they have been integrated via novel nanoengineering approaches for water treatment processes. This review aims at giving an overview of nanocellulose requirements concerning emerging nanotechnologies of waster treatments and purification, i.e., adsorption, absorption, flocculation, photocatalytic degradation, disinfection, antifouling, ultrafiltration, nanofiltration, and reverse osmosis. Firstly, the nanocellulose synthesis methods (mechanical, physical, chemical, and biological), unique properties (sizes, geometries, and surface chemistry) were presented and their use for capturing and removal of wastewater pollutants was explained. Secondly, different chemical modification approaches surface functionalization (with functional groups, polymers, and nanoparticles) for enhancing the surface chemistry of the nanocellulose for enabling the effective removal of specific pollutants (suspended particles, microorganisms, hazardous metals ions, organic dyes, drugs, pesticides fertilizers, and oils) were highlighted. Thirdly, new fabrication approaches (solution casting, thermal treatment, electrospinning, 3D printing) that integrated nanocelluloses (spherical nanoparticles, nanowhiskers, nanofibers) to produce water treatment materials (individual composite nanoparticles, hydrogels, aerogels, sponges, membranes, and nanopapers) were covered. Finally, the major challenges and future perspectives concerning the applications of nanocellulose based materials in water treatment and purification were highlighted.
- 9 November 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (11) , 3008
Open AccessNanocellulose-Based Materials for Water Treatment: Adsorption, Photocatalytic Degradation, Disinfection, Antifouling, and Nanofiltration
Nanocelluloses are promising bio-nano-materials for use as water treatment materials in environmental protection and remediation. Over the past decades, they have been integrated via novel nanoengineering approaches for water treatment processes. This review aims at giving an overview of nanocellulose requirements concerning emerging nanotechnologies of waster treatments and purification, i.e., adsorption, absorption, flocculation, photocatalytic degradation, disinfection, antifouling, ultrafiltration, nanofiltration, and reverse osmosis. Firstly, the nanocellulose synthesis methods (mechanical, physical, chemical, and biological), unique properties (sizes, geometries, and surface chemistry) were presented and their use for capturing and removal of wastewater pollutants was explained. Secondly, different chemical modification approaches surface functionalization (with functional groups, polymers, and nanoparticles) for enhancing the surface chemistry of the nanocellulose for enabling the effective removal of specific pollutants (suspended particles, microorganisms, hazardous metals ions, organic dyes, drugs, pesticides fertilizers, and oils) were highlighted. Thirdly, new fabrication approaches (solution casting, thermal treatment, electrospinning, 3D printing) that integrated nanocelluloses (spherical nanoparticles, nanowhiskers, nanofibers) to produce water treatment materials (individual composite nanoparticles, hydrogels, aerogels, sponges, membranes, and nanopapers) were covered. Finally, the major challenges and future perspectives concerning the applications of nanocellulose based materials in water treatment and purification were highlighted.
- Open Access
- 14 July 2021
- Published by Springer Nature in MRS Bulletin
- Vol. 46 (7) , 650-654
The Magic Kingdom of imperfect graphene
- 14 July 2021
- Published by Springer Nature in MRS Bulletin
- Vol. 46 (7) , 650-654
Open AccessThe Magic Kingdom of imperfect graphene
- 14 February 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 30 (13) , 1908691
Fluidic Flow Assisted Deterministic Folding of Van der Waals Materials
Origami offers a distinct approach for designing and engineering new material structures and properties. The folding and stacking of atomically thin van der Waals (vdW) materials, for example, can lead to intriguing new physical properties including bandgap tuning, Van Hove singularity, and superconductivity. On the other hand, achieving well‐controlled folding of vdW materials with high spatial precision has been extremely challenging and difficult to scale toward large areas. Here, a deterministic technique is reported to fold vdW materials at a defined position and direction using microfluidic forces. Electron beam lithography (EBL) is utilized to define the folding area, which allows precise control of the folding geometry, direction, and position beyond 100 nm resolution. Using this technique, single‐atomic‐layer vdW materials or their heterostructures can be folded without the need for any external supporting layers in the final folded structure. In addition, arrays of patterns can be folded across a large area using this technique and electronic devices that can reconfigure device functionalities through folding are also demonstrated. Such scalable formation of folded vdW material structures with high precision can lead to the creation of new atomic‐scale materials and superlattices as well as opening the door to realizing foldable and reconfigurable electronics.
- 14 February 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 30 (13) , 1908691
Fluidic Flow Assisted Deterministic Folding of Van der Waals Materials
Origami offers a distinct approach for designing and engineering new material structures and properties. The folding and stacking of atomically thin van der Waals (vdW) materials, for example, can lead to intriguing new physical properties including bandgap tuning, Van Hove singularity, and superconductivity. On the other hand, achieving well‐controlled folding of vdW materials with high spatial precision has been extremely challenging and difficult to scale toward large areas. Here, a deterministic technique is reported to fold vdW materials at a defined position and direction using microfluidic forces. Electron beam lithography (EBL) is utilized to define the folding area, which allows precise control of the folding geometry, direction, and position beyond 100 nm resolution. Using this technique, single‐atomic‐layer vdW materials or their heterostructures can be folded without the need for any external supporting layers in the final folded structure. In addition, arrays of patterns can be folded across a large area using this technique and electronic devices that can reconfigure device functionalities through folding are also demonstrated. Such scalable formation of folded vdW material structures with high precision can lead to the creation of new atomic‐scale materials and superlattices as well as opening the door to realizing foldable and reconfigurable electronics.
- 22 January 2020
- Published by Springer Nature in Nature
- Vol. 577 (7791) , 477-478
Versatile strategy for making 2D materials
- 22 January 2020
- Published by Springer Nature in Nature
- Vol. 577 (7791) , 477-478
Versatile strategy for making 2D materials
- 6 January 2020
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 35 (2) , 025010
Modeling of inversion and centroid charges of long channel strained-silicon surrounding gate MOSFETs incorporating quantum effects
This paper presents a modeling approach for strained silicon surrounding gate MOSFETs. The main contribution of this work is the simplification of the charge model by using an explicit solution technique which includes the strained and quantum effects. Quantum effects are essential due to extreme scaling of radius and oxide thickness. These can be solved by integrating the quantum capacitance and threshold in the proposed model. The gate capacitance is formulated based on a centroid charge that can be applied for multiple doping levels and structural dimensions. Meanwhile, the quantum effect on the channel due to carrier confinement can be approximated based on the radius of the channel. For the simulator, the Bohm Quantum Model (BQP) is used to facilitate the quantum effect. Our explicit model is in good agreement with the numerical simulator, for various gate voltages, doping concentration and structural effects, based on the centroid and inversion charge. It is found that the doping level can contribute to the changes in the centroid charge position from the silicon-oxide interface to the center of the channel. In addition, the tensile strain shows a significant impact on the electrical properties of the strained silicon surrounding gate such as threshold voltage, inversion charge, and current. This technique holds the potential for implementation is owing to advantages such as fast data computing which can be directly integrated into the circuit simulator.
- 6 January 2020
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 35 (2) , 025010
Modeling of inversion and centroid charges of long channel strained-silicon surrounding gate MOSFETs incorporating quantum effects
This paper presents a modeling approach for strained silicon surrounding gate MOSFETs. The main contribution of this work is the simplification of the charge model by using an explicit solution technique which includes the strained and quantum effects. Quantum effects are essential due to extreme scaling of radius and oxide thickness. These can be solved by integrating the quantum capacitance and threshold in the proposed model. The gate capacitance is formulated based on a centroid charge that can be applied for multiple doping levels and structural dimensions. Meanwhile, the quantum effect on the channel due to carrier confinement can be approximated based on the radius of the channel. For the simulator, the Bohm Quantum Model (BQP) is used to facilitate the quantum effect. Our explicit model is in good agreement with the numerical simulator, for various gate voltages, doping concentration and structural effects, based on the centroid and inversion charge. It is found that the doping level can contribute to the changes in the centroid charge position from the silicon-oxide interface to the center of the channel. In addition, the tensile strain shows a significant impact on the electrical properties of the strained silicon surrounding gate such as threshold voltage, inversion charge, and current. This technique holds the potential for implementation is owing to advantages such as fast data computing which can be directly integrated into the circuit simulator.
- 12 February 2019
- Published by Elsevier in Tribology International
- Vol. 134, 335-340
Investigation about tribological behavior of ABS and PC-ABS polymers coated with graphene
- 12 February 2019
- Published by Elsevier in Tribology International
- Vol. 134, 335-340
Investigation about tribological behavior of ABS and PC-ABS polymers coated with graphene
- Open Access
- 18 September 2018
- Published by Springer Nature in Breast Cancer Research
- Vol. 20 (1) , 1-13
Efficient and tumor-specific knockdown of MTDH gene attenuates paclitaxel resistance of breast cancer cells both in vivo and in vitro
Drug resistance of paclitaxel (TAX), the first-line chemotherapy drug for breast cancer, was reported to develop in 90% of patients with breast cancer, especially metastatic breast cancer. Investigating the mechanism of TAX resistance of breast cancer cells and developing the strategy improving its therapeutic efficiency are crucial to breast cancer cure. We here report an elegant nanoparticle (NP)-based technique that realizes efficient breast cancer treatment of TAX. Using lentiviral vector-mediated gene knockdown, we first demonstrated that TAX therapeutic efficiency was closely correlated with metadherin (MTDH) gene expression in breast cancer cell lines. This finding was also supported by efficacy of TAX treatment in breast cancer patients from our clinical studies. Specifically, TAX treatment became more effective when MTDH expression was decreased in MCF-7 cancer cells by the blocking nuclear factor-kappa B (NF-κB) pathway. Based on these findings, we subsequently synthesized a polymeric NP that could co-deliver MTDH-small interfering RNA (MTDH–siRNA) and TAX into the breast cancer tumors in tumor-bearing mice. The NPs were composed of a cationic copolymer, which wrapped TAX in the inside and adsorbed the negatively charged siRNA on their surface with high drug-loading efficiency and good stability. NP-based co-delivery approach can effectively knock down the MTDH gene both in vitro and in vivo, which dramatically inhibits breast tumor growth, achieving effective TAX chemotherapy treatment without overt side effects. This study provides a potential therapeutic strategy for the treatment of a wide range of solid tumors highly expressing MTDH.
- 18 September 2018
- Published by Springer Nature in Breast Cancer Research
- Vol. 20 (1) , 1-13
Open AccessEfficient and tumor-specific knockdown of MTDH gene attenuates paclitaxel resistance of breast cancer cells both in vivo and in vitro
Drug resistance of paclitaxel (TAX), the first-line chemotherapy drug for breast cancer, was reported to develop in 90% of patients with breast cancer, especially metastatic breast cancer. Investigating the mechanism of TAX resistance of breast cancer cells and developing the strategy improving its therapeutic efficiency are crucial to breast cancer cure. We here report an elegant nanoparticle (NP)-based technique that realizes efficient breast cancer treatment of TAX. Using lentiviral vector-mediated gene knockdown, we first demonstrated that TAX therapeutic efficiency was closely correlated with metadherin (MTDH) gene expression in breast cancer cell lines. This finding was also supported by efficacy of TAX treatment in breast cancer patients from our clinical studies. Specifically, TAX treatment became more effective when MTDH expression was decreased in MCF-7 cancer cells by the blocking nuclear factor-kappa B (NF-κB) pathway. Based on these findings, we subsequently synthesized a polymeric NP that could co-deliver MTDH-small interfering RNA (MTDH–siRNA) and TAX into the breast cancer tumors in tumor-bearing mice. The NPs were composed of a cationic copolymer, which wrapped TAX in the inside and adsorbed the negatively charged siRNA on their surface with high drug-loading efficiency and good stability. NP-based co-delivery approach can effectively knock down the MTDH gene both in vitro and in vivo, which dramatically inhibits breast tumor growth, achieving effective TAX chemotherapy treatment without overt side effects. This study provides a potential therapeutic strategy for the treatment of a wide range of solid tumors highly expressing MTDH.
- 1 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Uniformity of Multilayer Hexagonal Boron Nitride Dielectric Stacks Grown by Chemical Vapor Deposition on Platinum and Copper Substrates
Large-area multilayer hexagonal boron nitride (h-BN) dielectric stacks can be grown on different metallic substrates by chemical vapor deposition (CVD). The high temperatures used during the growth produce the polycrystallization of the metallic substrates (leading to different crystallographic orientations at the surface of each grain), which may influence the catalytic activity of the CVD process on different grains, as well as the properties of the h-BN stacks grown on them. In this work we compare the uniformity of multilayer h-BN dielectric stacks grown via CVD on two different metallic substrates: Pt and Cu. Our study reveals that using Pt substrates leads to h-BN thickness fluctuations from one Pt grain to another, while this effect remarkably reduced when the h-BN is grown on Cu substrates. Therefore, the use of Cu substrates seems to be more convenient for h-BN production and integration at the wafer level.
- 1 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Uniformity of Multilayer Hexagonal Boron Nitride Dielectric Stacks Grown by Chemical Vapor Deposition on Platinum and Copper Substrates
Large-area multilayer hexagonal boron nitride (h-BN) dielectric stacks can be grown on different metallic substrates by chemical vapor deposition (CVD). The high temperatures used during the growth produce the polycrystallization of the metallic substrates (leading to different crystallographic orientations at the surface of each grain), which may influence the catalytic activity of the CVD process on different grains, as well as the properties of the h-BN stacks grown on them. In this work we compare the uniformity of multilayer h-BN dielectric stacks grown via CVD on two different metallic substrates: Pt and Cu. Our study reveals that using Pt substrates leads to h-BN thickness fluctuations from one Pt grain to another, while this effect remarkably reduced when the h-BN is grown on Cu substrates. Therefore, the use of Cu substrates seems to be more convenient for h-BN production and integration at the wafer level.
- 9 January 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (3) , 2347-2353
Suppression of Tumor Energy Supply by Liposomal Nanoparticle-Mediated Inhibition of Aerobic Glycolysis
Aerobic glycolysis enables cancer cells to rapidly take up nutrients (e.g., nucleotides, amino acids, and lipids) and incorporate them into the biomass needed to produce a new cell. In contrast to existing chemotherapy/radiotherapy strategies, inhibiting aerobic glycolysis to limit the adenosine 5′-triphosphate (ATP) yield is a highly efficient approach for suppressing tumor cell proliferation. However, most, if not all, current inhibitors of aerobic glycolysis cause significant adverse effects because of their nonspecific delivery and distribution to nondiseased organs, low bioavailability, and a narrow therapeutic window. New strategies to enhance the biosafety and efficacy of these inhibitors are needed for moving them into clinical applications. To address this need, we developed a liposomal nanocarrier functionalized with a well-validated tumor-targeting peptide to specifically deliver the aerobic glycolysis inhibitor 3-bromopyruvate (3-BP) into the tumor tissue. The nanoparticles effectively targeted tumors after systemic administration into tumor-bearing mice and suppressed tumor growth by locally releasing 3-BP to inhibit the ATP production of the tumor cells. No overt side effects were observed in the major organs. This report demonstrates the potential utility of the nanoparticle-enabled delivery of an aerobic glycolysis inhibitor as an anticancer therapeutic agent.
- 9 January 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (3) , 2347-2353
Suppression of Tumor Energy Supply by Liposomal Nanoparticle-Mediated Inhibition of Aerobic Glycolysis
Aerobic glycolysis enables cancer cells to rapidly take up nutrients (e.g., nucleotides, amino acids, and lipids) and incorporate them into the biomass needed to produce a new cell. In contrast to existing chemotherapy/radiotherapy strategies, inhibiting aerobic glycolysis to limit the adenosine 5′-triphosphate (ATP) yield is a highly efficient approach for suppressing tumor cell proliferation. However, most, if not all, current inhibitors of aerobic glycolysis cause significant adverse effects because of their nonspecific delivery and distribution to nondiseased organs, low bioavailability, and a narrow therapeutic window. New strategies to enhance the biosafety and efficacy of these inhibitors are needed for moving them into clinical applications. To address this need, we developed a liposomal nanocarrier functionalized with a well-validated tumor-targeting peptide to specifically deliver the aerobic glycolysis inhibitor 3-bromopyruvate (3-BP) into the tumor tissue. The nanoparticles effectively targeted tumors after systemic administration into tumor-bearing mice and suppressed tumor growth by locally releasing 3-BP to inhibit the ATP production of the tumor cells. No overt side effects were observed in the major organs. This report demonstrates the potential utility of the nanoparticle-enabled delivery of an aerobic glycolysis inhibitor as an anticancer therapeutic agent.
- 1 June 2015
- Published by IOP Publishing in Materials Research Express
- Vol. 2 (6)
Raman analysis of gold on WSe2 single crystal film
- 1 June 2015
- Published by IOP Publishing in Materials Research Express
- Vol. 2 (6)
Raman analysis of gold on WSe2 single crystal film