Sondre Hilmar Hopen Eliasson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Sondre Hilmar Hopen Eliasson has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Vidar R. Jensen
Department of Chemistry, University of Bergen, Allegaten 41, Bergen N-5007, Norway
7 shared publications - Anamitra Chatterjee
Department of Chemistry, University of Bergen, Allégaten 41, N-5007 Bergen, Norway
4 shared publications - Giovanni Occhipinti
Department of Chemistry, University of Bergen, Allégaten 41, N-5007 Bergen, Norway
3 shared publications - Marco Foscato
Department of Chemistry, University of Bergen, Allegaten 41, Bergen N-5007, Norway
3 shared publications - Marinella de Giovanetti
Department of Chemistry and Hylleraas Centre for Quantum Molecular Sciences, University of Oslo, 0315 Oslo, Norway
3 shared publications - Michele Cascella
University of Oslo
3 shared publications
Latest Publications
- Open Access
- 12 November 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 15 (48) , 20355-20364
Morphology of lithium halides in tetrahydrofuran from molecular dynamics with machine learning potentials
Using machine-learning potentials with ab initio accuracy, molecular dynamics simulations predict a diversity of structures for lithium halogen salts dissolved in tetrahydrofuran – from more compact LiCl, to more dispersed LiI.
- 12 November 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 15 (48) , 20355-20364
Open AccessMorphology of lithium halides in tetrahydrofuran from molecular dynamics with machine learning potentials
Using machine-learning potentials with ab initio accuracy, molecular dynamics simulations predict a diversity of structures for lithium halogen salts dissolved in tetrahydrofuran – from more compact LiCl, to more dispersed LiI.
- Open Access
- 7 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Morphology of Lithium Halides in Tetrahydrofuran from Molecular Dynamics with Machine Learning Potentials
The preferred structures of lithium halides (LiX, with X = Cl, Br, I) in organic solvents have been the subject of a wide scientific debate, and a large variety of forms has been isolated and characterized by X-ray diffraction. The identified molecular scaffolds for LiX are diverse, often built on (LiX)n rings with a prevalence of rhomboidal arrangements and an appropriate number of solvent or Lewis base molecules coordinating the lithium ions. Much less is known about the structures of LiX in solution, limiting the understanding of the synergistic role of LiX in reactions with various organometallic complexes, as prominently represented by the turbo Grignard reaction. Here, we trained a machine learning potential on ab initio data to explore the complex conformational landscape for systems comprising 4 LiX moieties in tetrahydrofuran (THF). For all the considered halogens a large number of scaffolds were found at thermally accessible free energy values, indicating that LiX in solution are a diverse ensemble constituted by (LiX)n moieties of various size, completed by the appropriate number of coordinating THF. LiCl shows preference for compact, pseudo-cubane [(LiCl)(THF)]4 structures, coexisting with open rings. At concen- trations close to the solubility limit, LiCl forms hexagonal structures, in analogy with literature observations on pre-nucleating NaCl. LiBr tends to favor less compact, more solvated aggregates. LiI significantly differs from the two other cases, producing highly solvated, monomeric, dimeric or linear structures. This study provides a comprehensive view of LiX in organic solvent, revealing dynamical polymorphism that is not easily experimentally observable.
- 7 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMorphology of Lithium Halides in Tetrahydrofuran from Molecular Dynamics with Machine Learning Potentials
The preferred structures of lithium halides (LiX, with X = Cl, Br, I) in organic solvents have been the subject of a wide scientific debate, and a large variety of forms has been isolated and characterized by X-ray diffraction. The identified molecular scaffolds for LiX are diverse, often built on (LiX)n rings with a prevalence of rhomboidal arrangements and an appropriate number of solvent or Lewis base molecules coordinating the lithium ions. Much less is known about the structures of LiX in solution, limiting the understanding of the synergistic role of LiX in reactions with various organometallic complexes, as prominently represented by the turbo Grignard reaction. Here, we trained a machine learning potential on ab initio data to explore the complex conformational landscape for systems comprising 4 LiX moieties in tetrahydrofuran (THF). For all the considered halogens a large number of scaffolds were found at thermally accessible free energy values, indicating that LiX in solution are a diverse ensemble constituted by (LiX)n moieties of various size, completed by the appropriate number of coordinating THF. LiCl shows preference for compact, pseudo-cubane [(LiCl)(THF)]4 structures, coexisting with open rings. At concen- trations close to the solubility limit, LiCl forms hexagonal structures, in analogy with literature observations on pre-nucleating NaCl. LiBr tends to favor less compact, more solvated aggregates. LiI significantly differs from the two other cases, producing highly solvated, monomeric, dimeric or linear structures. This study provides a comprehensive view of LiX in organic solvent, revealing dynamical polymorphism that is not easily experimentally observable.
- Open Access
- 10 January 2024
- Published by American Chemical Society (ACS) in Journal of Chemical Information and Modeling
- Vol. 64 (2) , 412-424
Automated de Novo Design of Olefin Metathesis Catalysts: Computational and Experimental Analysis of a Simple Thermodynamic Design Criterion
Methods for computational de novo design of inorganic molecules have paved the way for automated design of homogeneous catalysts. Such studies have so far relied on correlation-based prediction models as fitness functions (figures of merit), but the soundness of these approaches has yet to be tested by experimental verification of de novo-designed catalysts. Here, a previously developed criterion for the optimization of dative ligands L in ruthenium-based olefin metathesis catalysts RuCl2(L)(L')(═CHAr), where Ar is an aryl group and L' is a phosphine ligand dissociating to activate the catalyst, was used in de novo design experiments. These experiments predicted catalysts bearing an N-heterocyclic carbene (L = 9) substituted by two N-bound mesityls and two tert-butyl groups at the imidazolidin-2-ylidene backbone to be promising. Whereas the phosphine-stabilized precursor assumed by the prediction model could not be made, a pyridine-stabilized ruthenium alkylidene complex (17) bearing carbene 9 was less active than a known leading pyridine-stabilized Grubbs-type catalyst (18, L = H2IMes). A density functional theory-based analysis showed that the unsubstituted metallacyclobutane (MCB) intermediate generated in the presence of ethylene is the likely resting state of both 17 and 18. Whereas the design criterion via its correlation between the stability of the MCB and the rate-determining barrier indeed seeks to stabilize the MCB, it relies on RuCl2(L)(L')(═CH2) adducts as resting states. The change in resting state explains the discrepancy between the prediction and the actual performance of catalyst 17. To avoid such discrepancies and better address the multifaceted challenges of predicting catalytic performance, future de novo catalyst design studies should explore and test design criteria incorporating information from more than a single relative energy or intermediate.
- 10 January 2024
- Published by American Chemical Society (ACS) in Journal of Chemical Information and Modeling
- Vol. 64 (2) , 412-424
Open AccessAutomated de Novo Design of Olefin Metathesis Catalysts: Computational and Experimental Analysis of a Simple Thermodynamic Design Criterion
Methods for computational de novo design of inorganic molecules have paved the way for automated design of homogeneous catalysts. Such studies have so far relied on correlation-based prediction models as fitness functions (figures of merit), but the soundness of these approaches has yet to be tested by experimental verification of de novo-designed catalysts. Here, a previously developed criterion for the optimization of dative ligands L in ruthenium-based olefin metathesis catalysts RuCl2(L)(L')(═CHAr), where Ar is an aryl group and L' is a phosphine ligand dissociating to activate the catalyst, was used in de novo design experiments. These experiments predicted catalysts bearing an N-heterocyclic carbene (L = 9) substituted by two N-bound mesityls and two tert-butyl groups at the imidazolidin-2-ylidene backbone to be promising. Whereas the phosphine-stabilized precursor assumed by the prediction model could not be made, a pyridine-stabilized ruthenium alkylidene complex (17) bearing carbene 9 was less active than a known leading pyridine-stabilized Grubbs-type catalyst (18, L = H2IMes). A density functional theory-based analysis showed that the unsubstituted metallacyclobutane (MCB) intermediate generated in the presence of ethylene is the likely resting state of both 17 and 18. Whereas the design criterion via its correlation between the stability of the MCB and the rate-determining barrier indeed seeks to stabilize the MCB, it relies on RuCl2(L)(L')(═CH2) adducts as resting states. The change in resting state explains the discrepancy between the prediction and the actual performance of catalyst 17. To avoid such discrepancies and better address the multifaceted challenges of predicting catalytic performance, future de novo catalyst design studies should explore and test design criteria incorporating information from more than a single relative energy or intermediate.
- Open Access
- 20 July 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (30) , 16305-16309
Morphological Plasticity of LiCl Clusters Interacting with Grignard Reagent in Tetrahydrofuran
Ab initio molecular dynamics simulations are used to explore tetrahydrofuran (THF) solutions containing pure LiCl and LiCl with CH3MgCl, as model constituents of the turbo Grignard reagent. LiCl aggregates as Li4Cl4, which preferentially assumes compact cubane-like conformations. In particular, an open-edge pseudotetrahedral frame is promoted by solvent-assisted Li-Cl bond cleavage. Among the Grignard species involved in the Schlenk equilibrium, LiCl prefers to coordinate MgCl2 through μ2-Cl bridges. Using a 1:1 Li:Mg ratio, the plastic tetranuclear LiCl cluster decomposes to a highly solvated mixed LiCl·MgCl2 aggregate with prevalent Li-(μ2-Cl)2-Mg rings and linear LiCl entities. The MgCl2-assisted disaggregation of Li4Cl4 occurs through transient structures analogous to those detected for pure LiCl in THF, also corresponding to moieties observed in the solid state. This study identifies a synergistic role of LiCl for the determination of the compounds present in turbo Grignard solutions. LiCl shifts the Schlenk equilibrium promoting a higher concentration of dialkylmagnesium, while decomposing into smaller, more soluble, mixed Li:Mg:Cl clusters.
- 20 July 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (30) , 16305-16309
Open AccessMorphological Plasticity of LiCl Clusters Interacting with Grignard Reagent in Tetrahydrofuran
Ab initio molecular dynamics simulations are used to explore tetrahydrofuran (THF) solutions containing pure LiCl and LiCl with CH3MgCl, as model constituents of the turbo Grignard reagent. LiCl aggregates as Li4Cl4, which preferentially assumes compact cubane-like conformations. In particular, an open-edge pseudotetrahedral frame is promoted by solvent-assisted Li-Cl bond cleavage. Among the Grignard species involved in the Schlenk equilibrium, LiCl prefers to coordinate MgCl2 through μ2-Cl bridges. Using a 1:1 Li:Mg ratio, the plastic tetranuclear LiCl cluster decomposes to a highly solvated mixed LiCl·MgCl2 aggregate with prevalent Li-(μ2-Cl)2-Mg rings and linear LiCl entities. The MgCl2-assisted disaggregation of Li4Cl4 occurs through transient structures analogous to those detected for pure LiCl in THF, also corresponding to moieties observed in the solid state. This study identifies a synergistic role of LiCl for the determination of the compounds present in turbo Grignard solutions. LiCl shifts the Schlenk equilibrium promoting a higher concentration of dialkylmagnesium, while decomposing into smaller, more soluble, mixed Li:Mg:Cl clusters.
- 5 June 2019
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 220, 231-248
Benefit of a hemilabile ligand in deoxygenation of fatty acids to 1-alkenes
One of the most important tasks for chemistry in our time is to contribute to sustainable chemical production. A green industrial process for linear α-olefins, the arguably most important class of petrochemical intermediates, from renewable resources would be a major contribution to this end. Plant oils are attractive renewable feedstocks for this purpose because their triglycerides can be hydrolyzed to fatty acids that contain valuable long-chain hydrocarbons (C16–C22). These hydrocarbons may, in turn, be converted to α-olefins by the deoxygenation of the fatty acids. For the most selective of these deoxygenation reactions, transition-metal catalyzed decarbonylative dehydration, the density functional theory (DFT) calculations have just started to offer valuable mechanistic insight, and the use of this insight in rational catalyst design has been facilitated by the arrival of the first well-defined precatalyst for this reaction, Pd(cinnamyl)Cl(DPEphos) (1). Here, we present DFT calculations showing how, in 1, the hemilability of DPEphos, a classical P–O–P diphosphine, contributes to a low overall barrier and high α-selectivity. DPEphos facilitates decarbonylation by first switching from bidentate to monodentate binding to create a coordination site for CO. The recoordination of the dangling phosphine displaces the Pd-bound CO, a co-product that must leave the reactor for the reaction to proceed, and the escaping CO is here modelled using a low pressure in the calculation of its thermochemical corrections. Finally, the role of the hemilabile ligand suggests that further improvements in the decarbonylative dehydration of fatty acids to α-olefins might be achieved by exploring new, potentially asymmetric, hemilabile ligands.
- 5 June 2019
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 220, 231-248
Benefit of a hemilabile ligand in deoxygenation of fatty acids to 1-alkenes
One of the most important tasks for chemistry in our time is to contribute to sustainable chemical production. A green industrial process for linear α-olefins, the arguably most important class of petrochemical intermediates, from renewable resources would be a major contribution to this end. Plant oils are attractive renewable feedstocks for this purpose because their triglycerides can be hydrolyzed to fatty acids that contain valuable long-chain hydrocarbons (C16–C22). These hydrocarbons may, in turn, be converted to α-olefins by the deoxygenation of the fatty acids. For the most selective of these deoxygenation reactions, transition-metal catalyzed decarbonylative dehydration, the density functional theory (DFT) calculations have just started to offer valuable mechanistic insight, and the use of this insight in rational catalyst design has been facilitated by the arrival of the first well-defined precatalyst for this reaction, Pd(cinnamyl)Cl(DPEphos) (1). Here, we present DFT calculations showing how, in 1, the hemilability of DPEphos, a classical P–O–P diphosphine, contributes to a low overall barrier and high α-selectivity. DPEphos facilitates decarbonylation by first switching from bidentate to monodentate binding to create a coordination site for CO. The recoordination of the dangling phosphine displaces the Pd-bound CO, a co-product that must leave the reactor for the reaction to proceed, and the escaping CO is here modelled using a low pressure in the calculation of its thermochemical corrections. Finally, the role of the hemilabile ligand suggests that further improvements in the decarbonylative dehydration of fatty acids to α-olefins might be achieved by exploring new, potentially asymmetric, hemilabile ligands.
- 24 January 2019
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 7 (5) , 4903-4911
Green Solvent for the Synthesis of Linear α-Olefins from Fatty Acids
- 24 January 2019
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 7 (5) , 4903-4911
Green Solvent for the Synthesis of Linear α-Olefins from Fatty Acids
- 7 February 2018
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 8 (6) , 1487-1499
Selective production of linear α-olefins via catalytic deoxygenation of fatty acids and derivatives
Various homogeneous, heterogeneous, and enzyme catalysis strategies for the selective synthesis of linear α-olefins from fatty acids and their derivatives are reviewed.
- 7 February 2018
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 8 (6) , 1487-1499
Selective production of linear α-olefins via catalytic deoxygenation of fatty acids and derivatives
Various homogeneous, heterogeneous, and enzyme catalysis strategies for the selective synthesis of linear α-olefins from fatty acids and their derivatives are reviewed.
- Open Access
- 4 December 2017
- Published by MDPI AG in Inorganics
- Vol. 5 (4) , 87
The Mechanism of Rh-Catalyzed Transformation of Fatty Acids to Linear Alpha olefins
Linear alpha olefins (LAOs) are key commodity chemicals and petrochemical intermediates that are currently produced from fossil resources. Fatty acids are the obvious renewable starting material for LAOs, which can be obtained via transition-metal-catalyzed decarbonylative dehydration. However, even the best catalysts that have been obtained to date, which are based on palladium, are not active and stable enough for industrial use. To provide insight for design of better catalysts, we here present the first computationally derived mechanism for another attractive transition-metal for this reaction, rhodium. By comparing the calculated mechanisms and free energy profiles for the two metals, Pd and Rh, we single out important factors for a facile, low-barrier reaction and for a stable catalyst. While the olefin formation is rate limiting for both of the metals, the rate-determining intermediate for Rh is, in contrast to Pd, the starting complex, (PPh3)2Rh(CO)Cl. This complex largely draws its stability from the strength of the Rh(I)–CO bond. CO is a much less suitable ligand for the high-oxidation state Rh(III). However, for steric reasons, rhodium dissociates a bulkier triphenylphosphine and keeps the carbonyl during the oxidative addition, which is less favorable than for Pd. When compared to Pd, which dissociates two phosphine ligands at the start of the reaction, the catalytic activity of Rh also appears to be hampered by its preference for high coordination numbers. The remaining ancillary ligands leave less space for the metal to mediate the reaction.
- 4 December 2017
- Published by MDPI AG in Inorganics
- Vol. 5 (4) , 87
Open AccessThe Mechanism of Rh-Catalyzed Transformation of Fatty Acids to Linear Alpha olefins
Linear alpha olefins (LAOs) are key commodity chemicals and petrochemical intermediates that are currently produced from fossil resources. Fatty acids are the obvious renewable starting material for LAOs, which can be obtained via transition-metal-catalyzed decarbonylative dehydration. However, even the best catalysts that have been obtained to date, which are based on palladium, are not active and stable enough for industrial use. To provide insight for design of better catalysts, we here present the first computationally derived mechanism for another attractive transition-metal for this reaction, rhodium. By comparing the calculated mechanisms and free energy profiles for the two metals, Pd and Rh, we single out important factors for a facile, low-barrier reaction and for a stable catalyst. While the olefin formation is rate limiting for both of the metals, the rate-determining intermediate for Rh is, in contrast to Pd, the starting complex, (PPh3)2Rh(CO)Cl. This complex largely draws its stability from the strength of the Rh(I)–CO bond. CO is a much less suitable ligand for the high-oxidation state Rh(III). However, for steric reasons, rhodium dissociates a bulkier triphenylphosphine and keeps the carbonyl during the oxidative addition, which is less favorable than for Pd. When compared to Pd, which dissociates two phosphine ligands at the start of the reaction, the catalytic activity of Rh also appears to be hampered by its preference for high coordination numbers. The remaining ancillary ligands leave less space for the metal to mediate the reaction.
- 17 October 2016
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 6 (11) , 7784-7789
Palladium Precatalysts for Decarbonylative Dehydration of Fatty Acids to Linear Alpha Olefins
- 17 October 2016
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 6 (11) , 7784-7789
Palladium Precatalysts for Decarbonylative Dehydration of Fatty Acids to Linear Alpha Olefins