LYLiang Yue

Liang Yue

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Liang Yue has a total of 76 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Elucidating Photochemical Conversion Mechanism of PDMS to Silica under Deep UV Light and Ozone

    by Harikrishna Sahu, Mingzhe Li, Madhubanti Mukherjee, Liang Yue, H. Jerry Qi, Rampi Ramprasad

    Photochemistry-based silica formation offers a pathway toward energy-efficient and controlled fabrication processes. While the transformation of poly(dimethylsiloxane) (PDMS) to silica (often referred to as SiOx due to incomplete conversion) under deep ultraviolet (DUV) irradiation in the presence of oxygen/ozone has experimentally been validated, the detailed mechanism remains elusive. This study demonstrates the underlying molecular-level mechanism of PDMS-to-silica conversion using density functional theory (DFT) calculations. Our findings reveal that atomic oxygen plays a key role in converting PDMS to silica by catalyzing the replacement of -CH3 groups to -OH groups, with a barrier-less insertion into Si-C and C-H bonds, eventually leading to condensation reactions that produce silica and formaldehyde and/or formic acid as byproducts. The proposed molecular pathway has further been validated through controlled experiments, which confirm the successive -CH3 to -OH replacements and identify gaseous byproducts such as formaldehyde. These findings offer insights into the fundamental processes involved in photochemistry-based silica fabrication and could pave the way for advancements in energy-efficient materials synthesis.


  • Open Access

    Computational synthesis of locomotive soft robots by topology optimization

    by Hiroki Kobayashi, Farzad Gholami, S. Macrae Montgomery, Masato Tanaka, Liang Yue, Changyoung Yuhn, Yuki Sato, Atsushi Kawamoto, H. Jerry Qi, Tsuyoshi Nomura

    Locomotive soft robots (SoRos) have gained prominence due to their adaptability. Traditional locomotive SoRo design is based on limb structures inspired by biological organisms and requires human intervention. Evolutionary robotics, designed using evolutionary algorithms (EAs), have shown potential for automatic design. However, EA-based methods face the challenge of high computational cost when considering multiphysics in locomotion, including materials, actuations, and interactions with environments. Here, we present a design approach for pneumatic SoRos that integrates gradient-based topology optimization with multiphysics material point method (MPM) simulations. This approach starts with a simple initial shape (a cube with a central cavity). The topology optimization with MPM then automatically and iteratively designs the SoRo shape. We design two SoRos, one for walking and one for climbing. These SoRos are 3D printed and exhibit the same locomotion features as in the simulations. This study presents an efficient strategy for designing SoRos, demonstrating that a purely mathematical process can produce limb-like structures seen in biological organisms.


  • Top Cited Papers
    Open Access

    Machine learning-enabled forward prediction and inverse design of 4D-printed active plates

    by Xiaohao Sun, Liang Yue, Luxia Yu, Connor T. Forte, Connor D. Armstrong, Kun Zhou, Frédéric Demoly, Ruike Renee Zhao, H. Jerry Qi

    Shape transformations of active composites (ACs) depend on the spatial distribution of constituent materials. Voxel-level complex material distributions can be encoded by 3D printing, offering enormous freedom for possible shape-change 4D-printed ACs. However, efficiently designing the material distribution to achieve desired 3D shape changes is significantly challenging yet greatly needed. Here, we present an approach that combines machine learning (ML) with both gradient-descent (GD) and evolutionary algorithm (EA) to design AC plates with 3D shape changes. A residual network ML model is developed for the forward shape prediction. A global-subdomain design strategy with ML-GD and ML-EA is then used for the inverse material-distribution design. For a variety of numerically generated target shapes, both ML-GD and ML-EA demonstrate high efficiency. By further combining ML-EA with a normal distance-based loss function, optimized designs are achieved for multiple irregular target shapes. Our approach thus provides a highly efficient tool for the design of 4D-printed active composites.


  • Open Access

    Coaxial‐Spun Hollow Liquid Crystal Elastomer Fiber as a Versatile Platform for Functional Composites

    by Mingzhe Li, Farzad Gholami, Liang Yue, Marcus R. Fratarcangeli, Elias Black, Shinnosuke Shimokawa, Tsuyoshi Nomura, Masato Tanaka, Hiroki Kobayashi, Yuyang Song, et al.

    The design and engineering of liquid crystal elastomers (LCE) composites for enhanced multifunctionality and responsiveness is highly desired. Here, a hollow LCE (h‐LCE) fiber fabricated via coaxial spinning, enabling the straightforward yet effective creation of functional LCE composites, is reported. Inspired by the fiber‐tubule architecture in skeletal muscles, the hollow fiber features an LCE outer shell for programmable actuation and an inner channel allowing for the integration of a variety of functional media. Thus, the h‐LCE fiber can serve as a versatile platform for multifunctionalities in LCE composites. With this unique design strategy, h‐LCE fibers are fabricated with lengths exceeding 3 meters in the lab with outer and inner diameters as small as 250 mm and 120 µm, respectively. The versatility of these h‐LCE fibers across various applications are further demonstrated, from fast‐response stiffness‐tunable actuators by integrating water flow as triggering media and shape memory polymer (SMP) for enhanced mechanical properties, to electrically driven actuating systems through the incorporation of liquid metal, and actuating light‐guides by combining SMP and PDMS optical fiber. The conception of h‐LCE fiber not only advances the design of multifunctional LCE composites but also paves the way for their application in soft robotics, artificial muscles, and beyond.


  • Open Access

    Chemical Circularity in 3D Printing with Biobased Δ‐Valerolactone

    by Liang Yue, Yong‐Liang Su, Mingzhe Li, Luxia Yu, Xiaohao Sun, Jaehyun Cho, Blair Brettmann, Will R. Gutekunst, Rampi Ramprasad, H. Jerry Qi

    Digital Light Processing (DLP) is a vat photopolymerization‐based 3D printing technology that fabricates parts typically made of chemically crosslinked polymers. The rapidly growing DLP market has an increasing demand for polymer raw materials, along with growing environmental concerns. Therefore, circular DLP printing with a closed‐loop recyclable ink is of great importance for sustainability. The low‐ceiling temperature alkyl‐substituted δ‐valerolactone (VL) is an industrially accessible biorenewable feedstock for developing recyclable polymers. In this work, acrylate‐functionalized poly(δ‐valerolactone) (PVLA), synthesized through the ring‐opening transesterification polymerization of VL, is used as a platform photoprecursor to improve the chemical circularity in DLP printing. A small portion of photocurable reactive diluent (RD) turns the unprintable PVLA into DLP printable ink. Various photocurable monomers can serve as RDs to modulate the properties of printed structures for applications like sacrificial molds, soft actuators, sensors, etc. The intrinsic depolymerizability of PVLA is well preserved, regardless of whether the printed polymer is a thermoplastic or thermoset. The recovery yield of virgin quality VL monomer is 93% through direct bulk thermolysis of the printed structures. This work proposes the utilization of depolymerizable photoprecursors and highlights the feasibility of biorenewable VL as a versatile material platform toward circular DLP printing.


  • Open Access

    Analyze the Importance of Animal Mental Health - Take Captive Animals as an Example

    by Yue Liang

    Animals, like humans, can also experience mental health problems, a viewpoint that has been previously overlooked or denied. In the context of societal development, there is a growing trend of keeping animals in captivity for various reasons. However, regrettably, there have been minimal efforts made towards enhancing the mental well-being of these captive animals. This essay aims to comprehensively explore the significance of animal mental health and its profound impact on both animal welfare and different aspects of human society. Furthermore, it provides compelling scientific justifications for prioritizing the promotion of animal mental health, with a specific focus on the detrimental effects of captivity on their psychological well-being. The essay also emphasizes the crucial role of animal mental health in fostering harmonious coexistence between humans and animals, promoting environmental conservation, and driving social progress. By shedding light on these interconnected domains, this essay aims to contribute to a more holistic understanding of the importance of animal mental health and advocate for its prioritization in various societal, ethical, and scientific contexts.

  • Open Access

    Low-temperature 3D printing of transparent silica glass microstructures

    by Mingzhe Li, Liang Yue, Arunkumar Chitteth Rajan, Luxia Yu, Harikrishna Sahu, S. Macrae Montgomery, Rampi Ramprasad, H. Jerry Qi

    Transparent silica glass is one of the most essential materials used in society and industry, owing to its exceptional optical, thermal, and chemical properties. However, glass is extremely difficult to shape, especially into complex and miniaturized structures. Recent advances in three-dimensional (3D) printing have allowed for the creation of glass structures, but these methods involve time-consuming and high-temperature processes. Here, we report a photochemistry-based strategy for making glass structures of micrometer size under mild conditions. Our technique uses a photocurable polydimethylsiloxane resin that is 3D printed into complex structures and converted to silica glass via deep ultraviolet (DUV) irradiation in an ozone environment. The unique DUV-ozone conversion process for silica microstructures is low temperature (~220°C) and fast (<5 hours). The printed silica glass is highly transparent with smooth surface, comparable to commercial fused silica glass. This work enables the creation of arbitrary structures in silica glass through photochemistry and opens opportunities in unexplored territories for glass processing techniques.


  • Open Access

    Cold-programmed shape-morphing structures based on grayscale digital light processing 4D printing

    by Liang Yue, Xiaohao Sun, Luxia Yu, Mingzhe Li, S. Macrae Montgomery, Yuyang Song, Tsuyoshi Nomura, Masato Tanaka, H. Jerry Qi

    Shape-morphing structures that can reconfigure their shape to adapt to diverse tasks are highly desirable for intelligent machines in many interdisciplinary fields. Shape memory polymers are one of the most widely used stimuli-responsive materials, especially in 3D/4D printing, for fabricating shape-morphing systems. They typically go through a hot-programming step to obtain the shape-morphing capability, which possesses limited freedom of reconfigurability. Cold-programming, which directly deforms the structure into a temporary shape without increasing the temperature, is simple and more versatile but has stringent requirements on material properties. Here, we introduce grayscale digital light processing (g-DLP) based 3D printing as a simple and effective platform for fabricating shape-morphing structures with cold-programming capabilities. With the multimaterial-like printing capability of g-DLP, we develop heterogeneous hinge modules that can be cold-programmed by simply stretching at room temperature. Different configurations can be encoded during 3D printing with the variable distribution and direction of the modular-designed hinges. The hinge module allows controllable independent morphing enabled by cold programming. By leveraging the multimaterial-like printing capability, multi-shape morphing structures are presented. The g-DLP printing with cold-programming morphing strategy demonstrates enormous potential in the design and fabrication of shape-morphing structures.


  • One‐Pot Synthesis of Depolymerizable δ‐Lactone Based Vitrimers

    by Liang Yue, Yong‐Liang Su, Mingzhe Li, Luxia Yu, S. Macrae Montgomery, Xiaohao Sun, M. G. Finn, Will R. Gutekunst, Rampi Ramprasad, H. Jerry Qi

    A depolymerizable vitrimer that allows both reprocessability and monomer recovery by a simple and scalable one‐pot two‐step synthesis of vitrimers from cyclic lactones is reported. Biobased δ‐valerolactone with alkyl substituents (δ‐lactone) has low ceiling temperature; thus, their ring‐opening‐polymerized aliphatic polyesters are capable of depolymerizing back to monomers. In this work, the amorphous poly(δ‐lactone) is solidified into an elastomer (i.e., δ‐lactone vitrimer) by a vinyl ether cross‐linker with dynamic acetal linkages, giving the merits of reprocessing and healing. Thermolysis of the bulk δ‐lactone vitrimer at 200 °C can recover 85–90 wt% of the material, allowing reuse without losing value and achieving a successful closed‐loop life cycle. It further demonstrates that the new vitrimer has excellent properties, with the potential to serve as a biobased and sustainable replacement of conventional soft elastomers for various applications such as lenses, mold materials, soft robots, and microfluidic devices.