Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hao Xu has a total of 172 co-authors. Here are the top co-authors by number of shared publications:

  • Jiang Wu

    Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu, China

    17 shared publications
  • Guifu Zou

    Soochow University

    6 shared publications
  • Huiyun Liu

    Department of Electronic and Electrical Engineering, University College London, London, UK

    6 shared publications
  • Juntong Zhu

    School of Physical Sciences CAS Key Laboratory of Vacuum Physics, University of the Chinese Academy of Sciences 3 , Beijing 100049, People's Republic of China

    6 shared publications
  • Xiao Li

    Department of Electronic and Electrical Engineering, University College London, London, UK

    6 shared publications
  • Zhengxiao Guo

    Department of Chemistry, University College London, London, UK

    6 shared publications

Latest Publications

  • Broadband optical readout based on S 11 reflection-valley modulation in an AlN film bulk acoustic resonator

    by Kexin Miao, Yuanhang Qu, Lei Liu, Chengxiao Mo, Gaohui Ge, Yan Liu, Tao Zhao, Hao Xu

    Here, we demonstrate a broadband optical readout strategy based on S11 reflection-valley modulation in an AlN film bulk acoustic resonator. Under optical illumination, the reflection valley progressively deepens and narrows with increasing optical power, corresponding to an increased loaded Q factor, while the resonance frequency changes only slightly. At a representative wavelength of 980 nm, the reflection-valley amplitude exhibits an approximately linear dependence on optical power density, with a responsivity of −57.95 dB/(mW/mm2). Similar amplitude modulation is observed over the measured wavelength range from 405 to 980 nm, demonstrating the broadband nature of the proposed readout. To clarify the electrical-port basis of this response, the measured S11 spectra are converted into the input impedance and admittance. The real part of the input admittance increases systematically with optical power density, whereas the imaginary part varies only weakly, indicating that the illumination-induced electrical-port modification is predominantly conductance-related. Layer-resolved optical simulations further show that the optical energy deposition occurs mainly near the top Mo electrode, while thermal simulations and reference-heating measurements indicate that significant global photothermal heating is unlikely to dominate the observed modulation. Modified Butterworth–Van Dyke analysis further reveals concurrent decreases in the effective static-branch resistance R0 and motional resistance Rm, providing an equivalent-circuit description consistent with the directly observed conductance enhancement. These results establish S11 reflection-valley modulation as a broadband amplitude-domain electrical-port optical readout strategy complementary to conventional frequency-shift-based resonant optical sensing.

  • Open Access

    CCD Pixel Miniaturization Technologies for Spatial Resolution Enhancement

    by Zhenyu Liu, Xiaowei Lyu, Zizhuo Liu, Hao Xu

    Charge-coupled device (CCD) image sensors stand out for their high sensitivity, low noise, and strong radiation tolerance, which have established them as core components in high-end imaging fields such as astronomical observation, remote sensing, and defense and security. With increasingly stringent requirements for imaging system performance in emerging applications, including ultra-high resolution, intelligent sensing, and multimodal information fusion, CCD technology continues to evolve toward higher levels of integration and improved performance. Within a fixed sensor area, one of the most straightforward ways to raise image resolution is to shrink pixel size, that is, CCD pixel miniaturization. In this review, we provide a systematic survey of the major advances in CCD pixel miniaturization achieved in recent years. We first detail four mainstream CCD architectures—linear-array, full-frame, frame-transfer, and interline-transfer—along with several newly developed architectures, and compare their performance characteristics and application constraints. We then summarize the key technologies that enable pixel miniaturization and examine several closely related technological directions. Finally, we look at the current state of CCD pixel miniaturization and discuss its future development trends.

  • Phase‐Change VO 2 Enabled Optoelectronic Devices With Switching Dynamics

    by Yanlin Wang, Xuebin Wang, Jiazhen Zhang, Qinhao Lin, Hao Xu

    Phase‐change materials (PCMs) exhibit reversible structural transformations and dramatic property changes in response to external stimuli, offering unprecedented opportunities for dynamically tunable optoelectronic devices. Vanadium dioxide (VO 2 ), a prototypical correlated oxide, displays a pronounced metal‐insulator transition. Its inherent multi‐stability and reversible phase transition enable innovative applications in information storage, dynamic modulation, and operational mode switching. This review outlines strategies for developing stable reconfigurable photonic components by exploiting the VO 2 phase transition, which can be precisely induced by external stimuli (light, electrical bias, heat). This approach bridges the gap between fundamental phase‐transition mechanisms and dynamic optoelectronic performance, paving the way for functional devices that transcend the limitations of conventional static components. It first clarifies the fundamental structural features of VO 2 and the corresponding evolution of its optical and electrical parameters during phase transition. Subsequently, it summarizes advanced synthesis techniques for high‐quality VO 2 films. Furthermore, a systematic analysis of state‐of‐the‐art VO 2 ‐based optoelectronic device architectures highlights their unique switching dynamics and non‐volatile phase transition mechanisms for optical response manipulation. These comprehensive discussions aim to inspire new design paradigms for multifunctional and reconfigurable optoelectronics, providing valuable insights for the development of next‐generation adaptive optoelectronic systems.


  • Open Access

    Tapered Quantum Cascade Laser Achieving Low Divergence Angle and High Output Power

    by Zizhuo Liu, Hongxiao Li, Jiagang Chen, Anlan Chen, Shan Niu, Changlei Wu, Yongqiang Sun, Xingli Zhong, Hui Su, Hao Xu, et al.

    In this work, we present a high-performance tapered quantum cascade laser (QCL) designed to achieve both high output power and low divergence angle. By integrating a tapered waveguide with a Fabry–Perot structure, significant improvements of tapered QCL devices in both output power and beam quality are demonstrated. The optimized 50 µm wide tapered QCL achieved a maximum output power of 2.76 W in pulsed operation with a slope efficiency of 3.52 W/A and a wall-plug efficiency (WPE) of 16.2%, while reducing the divergence angle to 13.01°. The device maintained a maximum power of 1.34 W with a WPE exceeding 8.2%, measured under room temperature and continuous wave (CW) operation. Compared to non-tapered Fabry–Perot QCLs, the tapered devices exhibited a nearly 10-fold increase in output power and over 200% improvement in WPE. This work provides a promising pathway for advancing mid-infrared laser technology, particularly for applications requiring high power, low divergence, and temperature stability.

  • Open Access

    2D/3D Perovskite Surface Passivation-Enabled High-Detectivity Near-Infrared Photodiodes

    by Xuefeng Huangfu, Junyu Chen, Gaohui Ge, Jianyu Li, Jiazhen Zhang, Qinhao Lin, Hao Xu, Shu Min Wang

    Due to high responsivity and wide spectral sensitivity, metal halide perovskite photodiodes have a wide range of applications in the fields of visible light and near-infrared photodetection. Specific detectivity is an important quality factor for high-performance perovskite-based photodiodes, while one of the keys to achieving high detectivity is to reduce dark current. Here, 3-fluoro phenethylammonium iodide (3F-PEAI) was used to passivate the perovskite surface and form the two-dimensional (2D) perovskite on the three-dimensional (3D) perovskite surface. The as-fabricated passivated perovskite photodiodes with 2D/3D hybrid-dimensional perovskite heterojunctions showed two orders of magnitude smaller dark current, larger open circuit voltage and faster photoresponse, when compared to the control perovskite photodiodes. Meanwhile, it maintained almost identical photocurrent, achieving a high specific detectivity up to 2.4 × 1012 Jones and over the visible-near-infrared broadband photodetection. Notably, the champion photoresponsivity value of 0.45 A W−1 was achieved at 760 nm. It was verified that the 2D capping layers were able to suppress trap states and accelerate photocarrier collection. This work demonstrates strategic passivation of surface iodine vacancies, offering a promising pathway for developing ultrasensitive and low-power consumption photodetectors based on metal halide perovskites.


  • Enhancing carrier dynamics via phase manipulation of dual-phase all-inorganic perovskites for high-performance photodetectors

    by Gaohui Ge, Kai Shen, Fan Cui, Jian Guo, Qiushi Wu, Hao Xu, Shu Min Wang

    Cesium lead bromide perovskites have demonstrated enormous potential in detecting applications, benefitting from their excellent optoelectronic properties and environmental stability. However, their intrinsic properties of photoluminescence intensity and carrier lifetime, key to photodetector performance, are still limited with conventional approaches (e.g., material purification and defect passivation). Here, we propose an efficient ultrasound-assisted growth method to manipulate the crystal phase of all-inorganic perovskites. Morphological, structural, and elemental characteristics of perovskites are comprehensively investigated, confirming the formation of CsPb2Br5–CsPbBr3 dual-phase (DP) perovskites. The fabricated DP perovskites exhibit enhanced carrier dynamics compared to CsPbBr3 quantum dots (QDs), including over a tenfold increase in photoluminescence intensity and an extended carrier lifetime of 656 ns. Such impressive improvements originate from the repeated radiative recombination introduced by the hierarchical phase of DP perovskites. As a result, the DP perovskite-based photodetector also demonstrates improved photoresponse, including a larger on/off ratio exceeding 103 and a higher detectivity of 1.48 × 1010 Jones, especially in the absence of conventional transporting layers. These results offer strong competitiveness for state-of-the-art perovskite photodetectors and deliver important implications for the widespread use of DP perovskites in assembling high-performance optoelectronic devices.

  • Open Access

    Recent Progress in Surface Acoustic Wave Sensors Based on Low-Dimensional Materials and Their Applications

    by Qinhao Lin, Chunxia Zhao, Mingyu Li, Hao Xu

    Benefitting from high sensitivity, rapid response, and cost-effectiveness, surface acoustic wave (SAW) sensors have found extensive applications across various fields, including biomedical diagnostics, environmental monitoring, and industrial automation. Recently, low-dimensional materials have shown great potential in enhancing the performance of SAW sensors due to their exceptional physical, optical, and electronic properties. This review explores recent advancements in the fundamental mechanisms, design, fabrication and applications of SAW sensors based on low-dimensional materials. Specifically, the utilization of low-dimensional materials, including zero-, one- and two-dimensional materials, as sensing materials in SAW sensors are summarized. Their applications in SAW-based gas sensing, ultraviolet light sensing, humidity sensing, as well as biosensing are discussed. Furthermore, major challenges and future perspectives regarding employing low-dimensional materials to enhance SAW sensors are highlighted, providing valuable insights for future research and development in this field.


  • Open Access

    Wavelength-Stable Metal Grating Distributed Feedback Quantum Cascade Laser Emitting at λ ~ 7.2 μm

    by Kedi Ma, Zizhuo Liu, Fengmin Cheng, Pengchang Yang, Hongxiao Li, Shan Niu, Gaohui Ge, Hao Xu, Ning Zhuo, Hui Su, et al.

    In this research, we demonstrate a wavelength-stable continuous wave (CW) distributed feedback (DFB) quantum cascade laser (QCL) emitting at 7.2 μm using a surface metal grating approach without epitaxial regrowth. The deep metal grating provides an appropriate DFB coupling coefficient and enhanced thermal extraction, resulting in improved lasing performance and the realization of impressive wavelength stability. Quantitatively, the temperature tuning coefficient of the single-mode emission is only 0.54 nm/°C from 20 °C to 70 °C, and the current tuning coefficient of the single-mode emission is 3.2 nm/A from 1.0 A to 1.6 A. A DFB-QCL with a 2 mm cavity length exhibits a low threshold current of 0.6 A and a power of 1.1 W with a slope efficiency of 1 W/A in the CW mode at 300 K. A single-mode operation with a side mode suppression ratio of 33 dB and a single-lobed far-field without beam steering is obtained in the working temperature range of 20–70 °C The improved wavelength stability using a deep surface metal grating approach promises simplified fabrication, which is meaningful for the commercial applications of QCLs.


  • Open Access

    High external quantum efficiency monolayer MoS2(1−x)Se2x phototransistor with alloying-induced near-infrared absorption

    by Yuhan Li, Qiaoqiao Li, Zichen Wang, Zhiyu Huang, Juntong Zhu, Ali Imran Channa, Fan Cui, Hao Xu, Xiao Li, Liujiang Zhou, et al.

    Due to intriguing electrical and optical properties, two-dimensional MoS2 has gained significant attention and emerged as a promising material in photonic and optoelectronic fields. Nevertheless, the intrinsic optical absorption of monolayer MoS2 is limited in the visible region only, restricting applications toward near-infrared (NIR) photodetection. Herein, we engineered the optical properties of MoS2 via alloying with Se to extend its optical absorption to the NIR region, and the phototransistor was fabricated based on monolayer MoS2(1−x)Se2x (x = ∼0.1). When under 780 nm (∼1.59 eV) illumination, the device delivered a photoresponsivity of 75.38 A/W, a specific detectivity of ∼1012 Jones, and an external quantum efficiency up to 11 230%. Additionally, it was revealed by density functional theory calculations that NIR absorption originated from the transition of valence states of sulfur vacancy (Vs) interband energy states between +1 and 0, providing an interband energy level of 1.58 eV away from the conduction band minima. Moreover, alloying of Se can suppress deep-level defects formed via Vs, further boosting device performance. This work has demonstrated high-performance NIR phototransistors based on ternary monolayer MoS2(1−x)Se2x, providing both a viable solution and fundamental mechanisms for NIR-blind MoS2 with extended optical absorption.


  • A Heterosynapse-Inspired Photodetector for Spatiotemporal Feature Fusion

    by Wen Du, Caihong Li, Yuxuan Hu, Yisen Yao, Yixuan Huang, Jihua Zou, Hao Xu, Jiang Wu, Zhiming Wang

    The increasing amount of data puts enormous pressure on data center. Therefore, the edge visual system is required to extract and process information more efficiently. Despite the development of neuromorphic visual systems, it has remained a challenge to process spatiotemporal information in the hardware-implemented visual system. Here, a heterosynapse-inspired photodetector is proposed for the intelligent edge visual system to process spatiotemporal information. The persistent photoconductivity (PPC) effect enables the photodetector to process temporal information, and the heterosynapse-inspired structure allows the visual system based on this photodetector to deal with spatial patterns. The proposed bionic photodetector provides a strategy for spatiotemporal feature fusion, which enables the target with spatiotemporal features recognized by the classifier composed of voltage comparators. Moreover, it is demonstrated that the visual system based on this design is able to conduct spatiotemporal pattern recognition and motion direction recognition tasks. This design within pixels paves a novel route for the intelligent edge visual system to extract, fuse, and recognize spatiotemporal information.