Tung Chiong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Tung Chiong has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Sie Yon Lau
Department of Chemical and Energy Engineering, Faculty of Engineering and Science, Curtin University Malaysia, Miri, Malaysia
3 shared publications - Michael Kobina Danquah
Department of Chemical and Biomolecular Engineering University of Tennessee Knoxville Tennessee USA
2 shared publications - Jaison Jeevanandam
Division of Experimental Neurobiology, Preclinical Research Program, National Institute of Mental Health, Klecany, Czech Republic
1 shared publication - Jianhua Zhang
Institute for Sustainable Industries and Liveable Cities, Victoria University, Melbourne, VIC 3011, Australia
1 shared publication K.S.D. Premarathna
1 shared publication- Kehinde Shola Obayomi
Institute for Sustainable Industries and Liveable Cities, Victoria University, PO Box 14428, Melbourne, Victoria 8001, Australia
1 shared publication
Latest Publications
- Open Access
- 24 January 2026
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 14 (2)
Microalgae-based CuO nanoflowers and CuO/ZnO nanoflower composites for photocatalytic degradation of ciprofloxacin antibiotic residue in water
- 24 January 2026
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 14 (2)
Open AccessMicroalgae-based CuO nanoflowers and CuO/ZnO nanoflower composites for photocatalytic degradation of ciprofloxacin antibiotic residue in water
- Open Access
Novel Concepts for Graphene-Based Nanomaterials Synthesis for Phenol Removal from Palm Oil Mill Effluent (POME)
In recent years, the global population has increased significantly, resulting in elevated levels of pollution in waterways. Organic pollutants are a major source of water pollution in various parts of the world, with phenolic compounds being the most common hazardous pollutant. These compounds are released from industrial effluents, such as palm oil milling effluent (POME), and cause several environmental issues. Adsorption is known to be an efficient method for mitigating water contaminants, with the ability to eliminate phenolic contaminants even at low concentrations. Carbon-based materials have been reported to be effective composite adsorbents for phenol removal due to their excellent surface features and impressive sorption capability. However, the development of novel sorbents with higher specific sorption capabilities and faster contaminant removal rates is necessary. Graphene possesses exceptionally attractive chemical, thermal, mechanical, and optical properties, including higher chemical stability, thermal conductivity, current density, optical transmittance, and surface area. The unique features of graphene and its derivatives have gained significant attention in the application of sorbents for water decontamination. Recently, the emergence of graphene-based adsorbents with large surface areas and active surfaces has been proposed as a potential alternative to conventional sorbents. The aim of this article is to discuss novel synthesis approaches for producing graphene-based nanomaterials for the adsorptive uptake of organic pollutants from water, with a special focus on phenols associated with POME. Furthermore, this article explores adsorptive properties, experimental parameters for nanomaterial synthesis, isotherms and kinetic models, mechanisms of nanomaterial formation, and the ability of graphene-based materials as adsorbents of specific contaminants.
Open AccessNovel Concepts for Graphene-Based Nanomaterials Synthesis for Phenol Removal from Palm Oil Mill Effluent (POME)
In recent years, the global population has increased significantly, resulting in elevated levels of pollution in waterways. Organic pollutants are a major source of water pollution in various parts of the world, with phenolic compounds being the most common hazardous pollutant. These compounds are released from industrial effluents, such as palm oil milling effluent (POME), and cause several environmental issues. Adsorption is known to be an efficient method for mitigating water contaminants, with the ability to eliminate phenolic contaminants even at low concentrations. Carbon-based materials have been reported to be effective composite adsorbents for phenol removal due to their excellent surface features and impressive sorption capability. However, the development of novel sorbents with higher specific sorption capabilities and faster contaminant removal rates is necessary. Graphene possesses exceptionally attractive chemical, thermal, mechanical, and optical properties, including higher chemical stability, thermal conductivity, current density, optical transmittance, and surface area. The unique features of graphene and its derivatives have gained significant attention in the application of sorbents for water decontamination. Recently, the emergence of graphene-based adsorbents with large surface areas and active surfaces has been proposed as a potential alternative to conventional sorbents. The aim of this article is to discuss novel synthesis approaches for producing graphene-based nanomaterials for the adsorptive uptake of organic pollutants from water, with a special focus on phenols associated with POME. Furthermore, this article explores adsorptive properties, experimental parameters for nanomaterial synthesis, isotherms and kinetic models, mechanisms of nanomaterial formation, and the ability of graphene-based materials as adsorbents of specific contaminants.
- 25 February 2019
- Published by Wiley in Asia-Pacific Journal of Chemical Engineering
- Vol. 14 (2)
Synthesis of peroxidase‐encapsulated sodium cellulose sulphate/poly‐dimethyl‐diallyl‐ammonium chloride biopolymer via polyelectrolyte complexation for enhanced removal of phenol
Peroxidases have attracted significant interests in enzymatic wastewater treatment strategies. In this work, jicama peroxidase (JP) was extracted from jicama skin peels and used for the degradation of phenol under free and immobilized conditions. The crude enzyme extract demonstrated enzymatic activity of 1.6 ± 0.1 U mL−1. Sodium cellulose sulphate/poly‐dimethyl‐diallyl‐ammonium chloride (NaCS‐PDMDAAC) spherical capsules were synthesized and immobilized with crude JP to generate JP beaded capsules with an average diameter of 5.05 mm ± 0.16 mm. Phenol biodegradation analysis showed that the free and immobilized JP capsules demonstrated optimum working pH values of 7 and 6, respectively, and both systems maintained JP catalytic functionalities over a broad range of H2O2 concentration before H2O2 inhibition. The optimal temperature range for phenol removal was from 25°C to 40°C for both free and immobilized JP with lower removal efficiency above 45°C due to thermal denaturation. Due to diffusive mass transfer limitation, immobilized JP capsules required a longer reaction time of 15 hr for optimal phenol removal efficiency of >95%, whereas free JP achieved the same efficiency in 13 hr. The first order kinetic rate constants for free and immobilized JP capsules were determined to be 1.21 hr−1 and 1.02 hr−1, respectively. JP capsules maintained reusability up to 4 cycles at the highest removal efficiency of >95% with no regeneration.
- 25 February 2019
- Published by Wiley in Asia-Pacific Journal of Chemical Engineering
- Vol. 14 (2)
Synthesis of peroxidase‐encapsulated sodium cellulose sulphate/poly‐dimethyl‐diallyl‐ammonium chloride biopolymer via polyelectrolyte complexation for enhanced removal of phenol
Peroxidases have attracted significant interests in enzymatic wastewater treatment strategies. In this work, jicama peroxidase (JP) was extracted from jicama skin peels and used for the degradation of phenol under free and immobilized conditions. The crude enzyme extract demonstrated enzymatic activity of 1.6 ± 0.1 U mL−1. Sodium cellulose sulphate/poly‐dimethyl‐diallyl‐ammonium chloride (NaCS‐PDMDAAC) spherical capsules were synthesized and immobilized with crude JP to generate JP beaded capsules with an average diameter of 5.05 mm ± 0.16 mm. Phenol biodegradation analysis showed that the free and immobilized JP capsules demonstrated optimum working pH values of 7 and 6, respectively, and both systems maintained JP catalytic functionalities over a broad range of H2O2 concentration before H2O2 inhibition. The optimal temperature range for phenol removal was from 25°C to 40°C for both free and immobilized JP with lower removal efficiency above 45°C due to thermal denaturation. Due to diffusive mass transfer limitation, immobilized JP capsules required a longer reaction time of 15 hr for optimal phenol removal efficiency of >95%, whereas free JP achieved the same efficiency in 13 hr. The first order kinetic rate constants for free and immobilized JP capsules were determined to be 1.21 hr−1 and 1.02 hr−1, respectively. JP capsules maintained reusability up to 4 cycles at the highest removal efficiency of >95% with no regeneration.