Bakthan Singaram
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Bakthan Singaram has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Scott R. J. Oliver
Department of Chemistry and Biochemistry, University of California, Santa Cruz, California 95064, United States
4 shared publications - Gabriella Amberchan
Department of Chemistry and Biochemistry, University of California, Santa Cruz, California 95064, United States
3 shared publications - Dominic-Luc Webb
Department of Medical Sciences, Gastroenterology and Hepatology, Rudbeck Lab, Uppsala University, Uppsala, Sweden
2 shared publications Josh H. Golden
Department of Chemistry and Biochemistry, University of California, Santa Cruz, 1156 High Street., Santa Cruz, California 95064, United States
2 shared publications- Kevin C. Lofgren
Department of Chemistry and Biochemistry, University of California, Santa Cruz, California 95064, United States
2 shared publications - Abdul Halim
Department of Medical Sciences, Gastroenterology and Hepatology Unit, Uppsala University, Uppsala, Sweden
1 shared publication
Latest Publications
- 3 October 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (20) , 19659-19667
Borate Pathway to FAMEs at Near-Ambient Conditions from Used Oil
- 3 October 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (20) , 19659-19667
Borate Pathway to FAMEs at Near-Ambient Conditions from Used Oil
- 30 October 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (21) , 20485-20492
Gallium Nanoparticle Formation and Doping of Nanocrystalline Alumina from a Ga–Al Liquid Metal Hydrogen Generating Reaction
- 30 October 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (21) , 20485-20492
Gallium Nanoparticle Formation and Doping of Nanocrystalline Alumina from a Ga–Al Liquid Metal Hydrogen Generating Reaction
- 14 February 2022
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 5 (2) , 2636-2643
Aluminum Nanoparticles from a Ga–Al Composite for Water Splitting and Hydrogen Generation
- 14 February 2022
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 5 (2) , 2636-2643
Aluminum Nanoparticles from a Ga–Al Composite for Water Splitting and Hydrogen Generation
- 20 April 2021
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 9 (17) , 6068-6078
Real-Time Monitoring of Aqueous Organic Reduction Reactions Using Ex Situ Fiber Optic Raman Spectroscopy
- 20 April 2021
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 9 (17) , 6068-6078
Real-Time Monitoring of Aqueous Organic Reduction Reactions Using Ex Situ Fiber Optic Raman Spectroscopy
- 12 April 2021
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 86 (9) , 6207-6227
Reaction of Diisobutylaluminum Borohydride, a Binary Hydride, with Selected Organic Compounds Containing Representative Functional Groups
The binary hydride, diisobutylaluminum borohydride [(iBu)2AlBH4], synthesized from diisobutylaluminum hydride (DIBAL) and borane dimethyl sulfide (BMS) has shown great potential in reducing a variety of organic functional groups. This unique binary hydride, (iBu)2AlBH4, is readily synthesized, versatile, and simple to use. Aldehydes, ketones, esters, and epoxides are reduced very fast to the corresponding alcohols in essentially quantitative yields. This binary hydride can reduce tertiary amides rapidly to the corresponding amines at 25 °C in an efficient manner. Furthermore, nitriles are converted into the corresponding amines in essentially quantitative yields. These reactions occur under ambient conditions and are completed in an hour or less. The reduction products are isolated through a simple acid–base extraction and without the use of column chromatography. Further investigation showed that (iBu)2AlBH4 has the potential to be a selective hydride donor as shown through a series of competitive reactions. Similarities and differences between (iBu)2AlBH4, DIBAL, and BMS are discussed.
- 12 April 2021
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 86 (9) , 6207-6227
Reaction of Diisobutylaluminum Borohydride, a Binary Hydride, with Selected Organic Compounds Containing Representative Functional Groups
The binary hydride, diisobutylaluminum borohydride [(iBu)2AlBH4], synthesized from diisobutylaluminum hydride (DIBAL) and borane dimethyl sulfide (BMS) has shown great potential in reducing a variety of organic functional groups. This unique binary hydride, (iBu)2AlBH4, is readily synthesized, versatile, and simple to use. Aldehydes, ketones, esters, and epoxides are reduced very fast to the corresponding alcohols in essentially quantitative yields. This binary hydride can reduce tertiary amides rapidly to the corresponding amines at 25 °C in an efficient manner. Furthermore, nitriles are converted into the corresponding amines in essentially quantitative yields. These reactions occur under ambient conditions and are completed in an hour or less. The reduction products are isolated through a simple acid–base extraction and without the use of column chromatography. Further investigation showed that (iBu)2AlBH4 has the potential to be a selective hydride donor as shown through a series of competitive reactions. Similarities and differences between (iBu)2AlBH4, DIBAL, and BMS are discussed.
- 8 February 2019
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 2 (3) , 1472-1483
A Mesoporous Aluminosilicate Nanoparticle-Supported Nickel–Boron Composite for the Catalytic Reduction of Nitroarenes
- 8 February 2019
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 2 (3) , 1472-1483
A Mesoporous Aluminosilicate Nanoparticle-Supported Nickel–Boron Composite for the Catalytic Reduction of Nitroarenes
- 17 January 2018
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 83 (3) , 1431-1440
Stabilization of NaBH4 in Methanol Using a Catalytic Amount of NaOMe. Reduction of Esters and Lactones at Room Temperature without Solvent-Induced Loss of Hydride
Rapid reaction of NaBH4 with MeOH precludes its use as a solvent for large-scale ester reductions. We have now learned that a catalytic amount of NaOMe (5 mol %) stabilizes NaBH4 solutions in methanol at 25 °C and permits the use of these solutions for the reduction of esters to alcohols. The generality of this reduction method was demonstrated using 22 esters including esters of naturally occurring chiral γ-butyrolactone containing dicarboxylic acids. This method permits the chemoselective reductions of esters in the presence of cyano and nitro groups and the reductive cyclization of a pyrrolidinedione ester to a fused five-membered furo[2,3-b]pyrrole and a (−)-crispine A analogue in high optical and chemical yields. Lactones, aliphatic esters, aromatic esters containing electron-withdrawing groups, and heteroaryl esters are reduced more rapidly than aryl esters containing electron-donating groups. The 11B NMR spectrum of the NaOMe-stabilized NaBH4 solutions showed a minor quartet due to monomethoxyborohydride (NaBH3OMe) that persisted up to 18 h at 25 °C. We postulate that NaBH3OMe is probably the active reducing agent. In support of this hypothesis, the activation barrier for hydride transfer from BH3(OMe)− onto benzoic acid methyl ester was calculated as 18.3 kcal/mol.
- 17 January 2018
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 83 (3) , 1431-1440
Stabilization of NaBH4 in Methanol Using a Catalytic Amount of NaOMe. Reduction of Esters and Lactones at Room Temperature without Solvent-Induced Loss of Hydride
Rapid reaction of NaBH4 with MeOH precludes its use as a solvent for large-scale ester reductions. We have now learned that a catalytic amount of NaOMe (5 mol %) stabilizes NaBH4 solutions in methanol at 25 °C and permits the use of these solutions for the reduction of esters to alcohols. The generality of this reduction method was demonstrated using 22 esters including esters of naturally occurring chiral γ-butyrolactone containing dicarboxylic acids. This method permits the chemoselective reductions of esters in the presence of cyano and nitro groups and the reductive cyclization of a pyrrolidinedione ester to a fused five-membered furo[2,3-b]pyrrole and a (−)-crispine A analogue in high optical and chemical yields. Lactones, aliphatic esters, aromatic esters containing electron-withdrawing groups, and heteroaryl esters are reduced more rapidly than aryl esters containing electron-donating groups. The 11B NMR spectrum of the NaOMe-stabilized NaBH4 solutions showed a minor quartet due to monomethoxyborohydride (NaBH3OMe) that persisted up to 18 h at 25 °C. We postulate that NaBH3OMe is probably the active reducing agent. In support of this hypothesis, the activation barrier for hydride transfer from BH3(OMe)− onto benzoic acid methyl ester was calculated as 18.3 kcal/mol.
- 13 November 2017
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 15 (45) , 9727-9733
Boronic acid recognition of non-interacting carbohydrates for biomedical applications: increasing fluorescence signals of minimally interacting aldoses and sucralose
To address carbohydrates that are commonly used in biomedical applications with low binding affinities for boronic acid based detection systems, two chemical modification methods were utilized to increase sensitivity. Modified carbohydrates were analyzed using a two component fluorescent probe based on boronic acid-appended viologen–HPTS (4,4′-o-BBV). Carbohydrates normally giving poor signals (fucose, L-rhamnose, xylose) were subjected to sodium borohydride (NaBH4) reduction in ambient conditions for 1 h yielding the corresponding sugar alcohols from fucose, L-rhamnose and xylose in essentially quantitative yields. Compared to original aldoses, apparent binding affinities were increased 4–25-fold. The chlorinated sweetener and colon permeability marker sucralose (Splenda), otherwise undetectable by boronic acids, was dechlorinated to a detectable derivative by reactive oxygen and hydroxide intermediates by the Fenton reaction or by H2O2 and UV light. This method is specific to sucralose as other common sugars, such as sucrose, do not contain any carbon–chlorine bonds. Significant fluorescence response was obtained for chemically modified sucralose with the 4,4′-o-BBV–HPTS probe system. This proof of principle can be applied to biomedical applications, such as gut permeability, malabsorption, etc.
- 13 November 2017
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 15 (45) , 9727-9733
Boronic acid recognition of non-interacting carbohydrates for biomedical applications: increasing fluorescence signals of minimally interacting aldoses and sucralose
To address carbohydrates that are commonly used in biomedical applications with low binding affinities for boronic acid based detection systems, two chemical modification methods were utilized to increase sensitivity. Modified carbohydrates were analyzed using a two component fluorescent probe based on boronic acid-appended viologen–HPTS (4,4′-o-BBV). Carbohydrates normally giving poor signals (fucose, L-rhamnose, xylose) were subjected to sodium borohydride (NaBH4) reduction in ambient conditions for 1 h yielding the corresponding sugar alcohols from fucose, L-rhamnose and xylose in essentially quantitative yields. Compared to original aldoses, apparent binding affinities were increased 4–25-fold. The chlorinated sweetener and colon permeability marker sucralose (Splenda), otherwise undetectable by boronic acids, was dechlorinated to a detectable derivative by reactive oxygen and hydroxide intermediates by the Fenton reaction or by H2O2 and UV light. This method is specific to sucralose as other common sugars, such as sucrose, do not contain any carbon–chlorine bonds. Significant fluorescence response was obtained for chemically modified sucralose with the 4,4′-o-BBV–HPTS probe system. This proof of principle can be applied to biomedical applications, such as gut permeability, malabsorption, etc.
- 6 May 2016
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 88 (10) , 5444-5452
Multiwell Assay for the Analysis of Sugar Gut Permeability Markers: Discrimination of Sugar Alcohols with a Fluorescent Probe Array Based on Boronic Acid Appended Viologens
With the aim of discerning between different sugar and sugar alcohols of biomedical relevance, such as gut permeability, arrays of 2-component probes were assembled with up to six boronic acid-appended viologens (BBVs): 4,4′-o-BBV, 3,3′-o-BBV, 3,4′-o-BBV, 4,4′-o,m-BBV, 4,7′-o-PBBV, and pBoB, each coupled to the fluorophore 8-hydroxypyrene, 1,3,6-trisulfonic acid trisodium salt (HPTS). These probes were screened for their ability to discriminate between lactulose, l-rhamnose, 3-O-methyl-d-glucose, and xylose. Binding studies of sugar alcohols mannitol, sorbitol, erythritol, adonitol, arabitol, galactitol, and xylitol revealed that diols containing threo-1,2-diol units have higher affinity for BBVs relative diols containing erythro-1,2 units. Those containing both threo-1,2- and 1,3-syn diol motifs showed high affinity for boronic acid binding. Fluorescence from the arrays were examined by principle component analysis (PCA) and linear discriminant analysis (LDA). Arrays with only three BBVs sufficed to discriminate between sugars (e.g., lactulose) and sugar alcohols (e.g., mannitol), establishing a differential probe. Compared with 4,4′-o-BBV, 2-fold reductions in lower limits of detection (LOD) and quantification (LOQ) were achieved for lactulose with 4,7-o-PBBV (LOD 41 μM, LOQ 72 μM). Using a combination of 4,4′-o-BBV, 4,7-o-PBBV, and pBoB, LDA statistically segregated lactulose/mannitol (L/M) ratios from 0.1 to 0.5, consistent with values encountered in small intestinal permeability tests. Another triad containing 3,3′-o-BBV, 4,4′-o-BBV, and 4,7-o-PBBV also discerned similar L/M ratios. This proof-of-concept demonstrates the potential for BBV arrays as an attractive alternate to HPLC to analyze mixtures of sugars and sugar alcohols in biomedical applications and sheds light on structural motifs that make this possible.
- 6 May 2016
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 88 (10) , 5444-5452
Multiwell Assay for the Analysis of Sugar Gut Permeability Markers: Discrimination of Sugar Alcohols with a Fluorescent Probe Array Based on Boronic Acid Appended Viologens
With the aim of discerning between different sugar and sugar alcohols of biomedical relevance, such as gut permeability, arrays of 2-component probes were assembled with up to six boronic acid-appended viologens (BBVs): 4,4′-o-BBV, 3,3′-o-BBV, 3,4′-o-BBV, 4,4′-o,m-BBV, 4,7′-o-PBBV, and pBoB, each coupled to the fluorophore 8-hydroxypyrene, 1,3,6-trisulfonic acid trisodium salt (HPTS). These probes were screened for their ability to discriminate between lactulose, l-rhamnose, 3-O-methyl-d-glucose, and xylose. Binding studies of sugar alcohols mannitol, sorbitol, erythritol, adonitol, arabitol, galactitol, and xylitol revealed that diols containing threo-1,2-diol units have higher affinity for BBVs relative diols containing erythro-1,2 units. Those containing both threo-1,2- and 1,3-syn diol motifs showed high affinity for boronic acid binding. Fluorescence from the arrays were examined by principle component analysis (PCA) and linear discriminant analysis (LDA). Arrays with only three BBVs sufficed to discriminate between sugars (e.g., lactulose) and sugar alcohols (e.g., mannitol), establishing a differential probe. Compared with 4,4′-o-BBV, 2-fold reductions in lower limits of detection (LOD) and quantification (LOQ) were achieved for lactulose with 4,7-o-PBBV (LOD 41 μM, LOQ 72 μM). Using a combination of 4,4′-o-BBV, 4,7-o-PBBV, and pBoB, LDA statistically segregated lactulose/mannitol (L/M) ratios from 0.1 to 0.5, consistent with values encountered in small intestinal permeability tests. Another triad containing 3,3′-o-BBV, 4,4′-o-BBV, and 4,7-o-PBBV also discerned similar L/M ratios. This proof-of-concept demonstrates the potential for BBV arrays as an attractive alternate to HPLC to analyze mixtures of sugars and sugar alcohols in biomedical applications and sheds light on structural motifs that make this possible.
- 30 December 2014
- Published by Royal Society of Chemistry (RSC) in Organic Chemistry Frontiers
- Vol. 2 (2) , 133-140
Binary reducing agents containing dichloroindium hydride for the selective, partial, or tandem reductions of bifunctional compounds consisting of halo-nitriles, halo-esters and halo-carboxylic acids
The selective, partial, or tandem reductions of bifunctional compounds containing primary alkyl or benzyl bromides can generate a variety of different products using a mixture of dichloroindium hydride (HInCl2) and an additional hydride, such as borane–tetrahydrofuran (BH3 : THF) or diisobutylaluminum hydride (DIBAL-H). Binary metal hydride systems, containing HInCl2 and BH3 : THF, are readily generated from anhydrous indium trichloride (InCl3) and sodium borohydride (NaBH4) in THF. Dichloroindium hydride can reduce primary halides and in the presence of another hydride, either generated in situ or added to the single-pot reaction, can perform tandem reductions of a variety of bifunctional bromides. Together, the hydrides reduce carbon–halogen bonds as well as an electrophilic group, such as a nitrile, an ester, or a carboxylic acid. The reduction of 4-(bromomethyl)benzonitrile using the HInCl2 and BH3 : THF binary metal hydride system affords 4-methylbenzylamine in an excellent yield under ambient conditions and short reaction times. By using the binary metal hydride system consisting of HInCl2 and DIBAL-H, the tandem reduction of 4-(bromomethyl)benzonitrile was achieved affording para-tolualdehyde in an excellent yield, also under ambient conditions. The reduction of 4-(bromomethyl)phenyl acetic acid by HInCl2 selectively reduced the carbon–halogen bond generating para-tolylacetic acid. When using either of the binary hydride systems, both functional groups were reduced generating 4-methylphenethyl alcohol. Methyl 4-(bromomethyl) benzoate underwent a selective or tandem reduction to generate [4-(bromomethyl)phenyl]methanol, methyl 4-methyl benzoate or para-tolylmethanol depending on the hydride system used. Consequently, a single bifunctional compound was transformed into a variety of different compounds by the simple manipulation of the binary hydride system used without the need for protecting groups, and in most cases, by a one-pot procedure.
- 30 December 2014
- Published by Royal Society of Chemistry (RSC) in Organic Chemistry Frontiers
- Vol. 2 (2) , 133-140
Binary reducing agents containing dichloroindium hydride for the selective, partial, or tandem reductions of bifunctional compounds consisting of halo-nitriles, halo-esters and halo-carboxylic acids
The selective, partial, or tandem reductions of bifunctional compounds containing primary alkyl or benzyl bromides can generate a variety of different products using a mixture of dichloroindium hydride (HInCl2) and an additional hydride, such as borane–tetrahydrofuran (BH3 : THF) or diisobutylaluminum hydride (DIBAL-H). Binary metal hydride systems, containing HInCl2 and BH3 : THF, are readily generated from anhydrous indium trichloride (InCl3) and sodium borohydride (NaBH4) in THF. Dichloroindium hydride can reduce primary halides and in the presence of another hydride, either generated in situ or added to the single-pot reaction, can perform tandem reductions of a variety of bifunctional bromides. Together, the hydrides reduce carbon–halogen bonds as well as an electrophilic group, such as a nitrile, an ester, or a carboxylic acid. The reduction of 4-(bromomethyl)benzonitrile using the HInCl2 and BH3 : THF binary metal hydride system affords 4-methylbenzylamine in an excellent yield under ambient conditions and short reaction times. By using the binary metal hydride system consisting of HInCl2 and DIBAL-H, the tandem reduction of 4-(bromomethyl)benzonitrile was achieved affording para-tolualdehyde in an excellent yield, also under ambient conditions. The reduction of 4-(bromomethyl)phenyl acetic acid by HInCl2 selectively reduced the carbon–halogen bond generating para-tolylacetic acid. When using either of the binary hydride systems, both functional groups were reduced generating 4-methylphenethyl alcohol. Methyl 4-(bromomethyl) benzoate underwent a selective or tandem reduction to generate [4-(bromomethyl)phenyl]methanol, methyl 4-methyl benzoate or para-tolylmethanol depending on the hydride system used. Consequently, a single bifunctional compound was transformed into a variety of different compounds by the simple manipulation of the binary hydride system used without the need for protecting groups, and in most cases, by a one-pot procedure.