Huayu Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Huayu Hu has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Yanjuan Zhang
School of Chemistry and Chemical Engineering Guangxi University Nanning China
7 shared publications - Zuqiang Huang
School of Chemistry and Chemical Engineering Guangxi University Nanning China
6 shared publications Zuqiang Huang
School of Chemistry and Chemical Engineering, Guangxi University, Nanning, 530004, PR China
5 shared publicationsYanjuan Zhang
School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004, China
4 shared publications- Mei Yang
School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004, China
3 shared publications - Aimin Huang
School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004, China
2 shared publications
Latest Publications
- 13 June 2025
- Published by Elsevier in Journal of Environmental Management
- Vol. 389, 126147
Enhanced Fe3+/Fe2+ cycle by a novel 2D/2D FeS/ACN composite for rapid photo-Fenton degradation of tetracycline-based wastewater
- 13 June 2025
- Published by Elsevier in Journal of Environmental Management
- Vol. 389, 126147
Enhanced Fe3+/Fe2+ cycle by a novel 2D/2D FeS/ACN composite for rapid photo-Fenton degradation of tetracycline-based wastewater
- 26 December 2024
- Published by Elsevier in Food Chemistry
- Vol. 470, 142665
Effects of the addition of cassava starch and the size of water clusters on physicochemical and cooking properties of rice noodles
- 26 December 2024
- Published by Elsevier in Food Chemistry
- Vol. 470, 142665
Effects of the addition of cassava starch and the size of water clusters on physicochemical and cooking properties of rice noodles
- 30 July 2020
- Published by IWA Publishing in Water Science & Technology
- Vol. 82 (3) , 492-502
In-situ synthesis of poly(m-phenylenediamine) on chitin bead for Cr(VI) removal
In this work, a user-friendly chitin-based adsorbent (CT-PmPD) was synthesized by in-situ polymerization of m-phenylenediamine on chitin bead, which could effectively remove Cr(VI) from water. The structure and morphology of the CT-PmPD were characterized by FT-IR, XRD, SEM, zeta potential and XPS. Specifically, the effect of adsorbed dosage, pH, contact time, adsorption temperature and coexisting salt on the adsorption of Cr(VI) were studied. Besides, the adsorption mechanism of CT-PmPD toward Cr(VI) were also analyzed. Consequenlty, CT-PmPD exhibited a monolayer adsorption and the Langmuir model fitted a Cr(VI) adsorption capacity reaching 185.4 mg/g at 298 K. The high adsorption capacity was attributed to the abundant amino groups of CT-PmPD, which could be protonated to boost the electrostatic attraction of Cr(VI) oxyanions, thus providing electron to reduce Cr(VI). Additionally, the CT-PmPD revealed a good regeneration and reusability capacity, maintaining most of its adsorption capacity even after five cycles of adsorption-desorption. This high adsorption capacity and excellent regeneration performance highlighted the great potential of CT-PmPD for the removal of Cr(VI).
- 30 July 2020
- Published by IWA Publishing in Water Science & Technology
- Vol. 82 (3) , 492-502
In-situ synthesis of poly(m-phenylenediamine) on chitin bead for Cr(VI) removal
In this work, a user-friendly chitin-based adsorbent (CT-PmPD) was synthesized by in-situ polymerization of m-phenylenediamine on chitin bead, which could effectively remove Cr(VI) from water. The structure and morphology of the CT-PmPD were characterized by FT-IR, XRD, SEM, zeta potential and XPS. Specifically, the effect of adsorbed dosage, pH, contact time, adsorption temperature and coexisting salt on the adsorption of Cr(VI) were studied. Besides, the adsorption mechanism of CT-PmPD toward Cr(VI) were also analyzed. Consequenlty, CT-PmPD exhibited a monolayer adsorption and the Langmuir model fitted a Cr(VI) adsorption capacity reaching 185.4 mg/g at 298 K. The high adsorption capacity was attributed to the abundant amino groups of CT-PmPD, which could be protonated to boost the electrostatic attraction of Cr(VI) oxyanions, thus providing electron to reduce Cr(VI). Additionally, the CT-PmPD revealed a good regeneration and reusability capacity, maintaining most of its adsorption capacity even after five cycles of adsorption-desorption. This high adsorption capacity and excellent regeneration performance highlighted the great potential of CT-PmPD for the removal of Cr(VI).
- 10 August 2019
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (7) , 48375
Graphene incorporated poly(vinyl chloride) composites prepared by mechanical activation with enhanced electrical and thermo–mechanical properties
This study reports the improvement in electrical and thermomechanical properties of pristine poly(vinyl chloride) (PVC) by the incorporation of graphene (GN) resulting in GN/PVC composites 137 mechanical activation (MA) using dioctyl phthalate (DOP) as dispersant. Microstructure, electrical, and thermomechanical properties of GN/PVC were systematically investigated. Scanning electron microscopy, mercury intrusion porosimetry, and particle size distribution analysis revealed that high‐energy ball milling destroyed the structure of pristine PVC and GN, without any visible agglomeration of GN in the resulting GN/PVC composites. At 0.13 wt% GN loading, the surface resistivity of GN/PVC composites was less than 3 × 108 Ω/square, meeting requirements of commercial antistatic PVC materials. Moreover, GN/PVC composites showed enhanced mechanical properties, thermal stability, and glass transition temperature than pristine PVC. Credited to enhanced thermomechanical and electrical properties of the newly designed GN/PVC composites, they could be deemed as potential alternative to classical PVC‐based antistatic materials in targeted applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48375.
- 10 August 2019
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (7) , 48375
Graphene incorporated poly(vinyl chloride) composites prepared by mechanical activation with enhanced electrical and thermo–mechanical properties
This study reports the improvement in electrical and thermomechanical properties of pristine poly(vinyl chloride) (PVC) by the incorporation of graphene (GN) resulting in GN/PVC composites 137 mechanical activation (MA) using dioctyl phthalate (DOP) as dispersant. Microstructure, electrical, and thermomechanical properties of GN/PVC were systematically investigated. Scanning electron microscopy, mercury intrusion porosimetry, and particle size distribution analysis revealed that high‐energy ball milling destroyed the structure of pristine PVC and GN, without any visible agglomeration of GN in the resulting GN/PVC composites. At 0.13 wt% GN loading, the surface resistivity of GN/PVC composites was less than 3 × 108 Ω/square, meeting requirements of commercial antistatic PVC materials. Moreover, GN/PVC composites showed enhanced mechanical properties, thermal stability, and glass transition temperature than pristine PVC. Credited to enhanced thermomechanical and electrical properties of the newly designed GN/PVC composites, they could be deemed as potential alternative to classical PVC‐based antistatic materials in targeted applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48375.
- Open Access
- 1 June 2019
- Published by MDPI AG in Nanomaterials
- Vol. 9 (6) , 839
Preparation of a Stable Nanoscale Manganese Residue-Derived FeS@Starch-Derived Carbon Composite for the Adsorption of Safranine T
To develop a novel, low-cost adsorbent with natural material and industrial waste as raw materials, nanoscale manganese residue-derived FeS@starch-derived carbon (MR–FeS@SC) composite was prepared by the carbonization of starch–manganese residue gel. Manganese residue-derived FeS (MR–FeS) and starch-derived carbon (SC) were also prepared as contrasts for comparative studies. The MR–FeS@SC nanocomposite exhibited relatively large specific surface area and micropore volume, appropriate pore size, abundant functional groups, strong interaction between the functional groups of SC and MR–FeS, and the immobilization and uniform distribution of MR–FeS nanoparticles onto SC support material, which contributed to better adsorption properties for the removal of Safranine T (ST) from the aqueous solution compared with those of MR–FeS and SC. The adsorption could be conducted at a wide range of pH and temperature to achieve a satisfy removal efficiency of ST with MR–FeS@SC nanocomposite as adsorbent. The adsorption kinetics well followed the pseudo-second-order model, and the dominant mechanism was chemisorption. The adsorption behavior was well described by the Langmuir isotherm model. Due to the strong interaction between MR–FeS nanoparticles and SC support, MR–FeS@SC nanocomposite exhibited better reusability and stability even after fifteen cycles. This study provides a facile method of preparing effective and stable adsorbents for the treatment of dye wastewater.
- 1 June 2019
- Published by MDPI AG in Nanomaterials
- Vol. 9 (6) , 839
Open AccessPreparation of a Stable Nanoscale Manganese Residue-Derived FeS@Starch-Derived Carbon Composite for the Adsorption of Safranine T
To develop a novel, low-cost adsorbent with natural material and industrial waste as raw materials, nanoscale manganese residue-derived FeS@starch-derived carbon (MR–FeS@SC) composite was prepared by the carbonization of starch–manganese residue gel. Manganese residue-derived FeS (MR–FeS) and starch-derived carbon (SC) were also prepared as contrasts for comparative studies. The MR–FeS@SC nanocomposite exhibited relatively large specific surface area and micropore volume, appropriate pore size, abundant functional groups, strong interaction between the functional groups of SC and MR–FeS, and the immobilization and uniform distribution of MR–FeS nanoparticles onto SC support material, which contributed to better adsorption properties for the removal of Safranine T (ST) from the aqueous solution compared with those of MR–FeS and SC. The adsorption could be conducted at a wide range of pH and temperature to achieve a satisfy removal efficiency of ST with MR–FeS@SC nanocomposite as adsorbent. The adsorption kinetics well followed the pseudo-second-order model, and the dominant mechanism was chemisorption. The adsorption behavior was well described by the Langmuir isotherm model. Due to the strong interaction between MR–FeS nanoparticles and SC support, MR–FeS@SC nanocomposite exhibited better reusability and stability even after fifteen cycles. This study provides a facile method of preparing effective and stable adsorbents for the treatment of dye wastewater.
- Open Access
- 16 February 2019
- Published by MDPI AG in Nanomaterials
- Vol. 9 (2) , 275
In Situ Synthesis of a Stable Fe3O4@Cellulose Nanocomposite for Efficient Catalytic Degradation of Methylene Blue
To rapidly obtain a stable Fe3O4@cellulose heterogeneous Fenton catalyst, a novel in situ chemical co-precipitation method was developed. Compared with mechanical activation (MA)-pretreated cellulose (MAC), MA + FeCl3 (MAFC)-pretreated cellulose (MAFCC) was more easily dissolved and uniformly distributed in NaOH/urea solvent. MAFCC and MAC solutions were used as precipitators to prepare Fe3O4@MAFCC and Fe3O4@MAC nanocomposites, respectively. MAFCC showed stronger interaction and more uniform combination with Fe3O4 nanoparticles than MAC, implying that MAFC pretreatment enhanced the accessibility, reactivity, and dissolving capacity of cellulose thus, provided reactive sites for the in situ growth of Fe3O4 nanoparticles on the regenerated cellulose. Additionally, the catalytic performance of Fe3O4@MAFCC nanocomposite was evaluated by using for catalytic degradation of methylene blue (MB), and Fe3O4@MAC nanocomposite and Fe3O4 nanoparticles were used for comparative studies. Fe3O4@MAFCC nanocomposite exhibited superior catalytic activity for the degradation and mineralization of MB in practical applications. After ten cycles, the structure of Fe3O4@MAFCC nanocomposite was not significantly changed owing to the strong interaction between MAFCC and Fe3O4 nanoparticles. This study provides a green pathway to the fabrication of a stable nanocomposite catalyst with high catalytic performance and reusability for the degradation of organic pollutants.
- 16 February 2019
- Published by MDPI AG in Nanomaterials
- Vol. 9 (2) , 275
Open AccessIn Situ Synthesis of a Stable Fe3O4@Cellulose Nanocomposite for Efficient Catalytic Degradation of Methylene Blue
To rapidly obtain a stable Fe3O4@cellulose heterogeneous Fenton catalyst, a novel in situ chemical co-precipitation method was developed. Compared with mechanical activation (MA)-pretreated cellulose (MAC), MA + FeCl3 (MAFC)-pretreated cellulose (MAFCC) was more easily dissolved and uniformly distributed in NaOH/urea solvent. MAFCC and MAC solutions were used as precipitators to prepare Fe3O4@MAFCC and Fe3O4@MAC nanocomposites, respectively. MAFCC showed stronger interaction and more uniform combination with Fe3O4 nanoparticles than MAC, implying that MAFC pretreatment enhanced the accessibility, reactivity, and dissolving capacity of cellulose thus, provided reactive sites for the in situ growth of Fe3O4 nanoparticles on the regenerated cellulose. Additionally, the catalytic performance of Fe3O4@MAFCC nanocomposite was evaluated by using for catalytic degradation of methylene blue (MB), and Fe3O4@MAC nanocomposite and Fe3O4 nanoparticles were used for comparative studies. Fe3O4@MAFCC nanocomposite exhibited superior catalytic activity for the degradation and mineralization of MB in practical applications. After ten cycles, the structure of Fe3O4@MAFCC nanocomposite was not significantly changed owing to the strong interaction between MAFCC and Fe3O4 nanoparticles. This study provides a green pathway to the fabrication of a stable nanocomposite catalyst with high catalytic performance and reusability for the degradation of organic pollutants.
- Open Access
- 15 January 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (4) , 2116-2124
Fabrication of graphite/MgO-reinforced poly(vinyl chloride) composites by mechanical activation with enhanced thermal properties
In this study, a mechanical activation (MA) approach was developed to fabricate graphite/MgO-reinforced poly(vinyl chloride) (PVC) composites with superior thermal properties. The composites were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and differential thermogravimetric (DTG) analysis. SEM results revealed uniformly dispersed graphite and MgO flakes in a PVC matrix and the successful formation of a thermal network by MA, which led to enhanced thermal conductivity. DSC and TGA results of the composites showed enhancement in the glass transition temperature (Tg) from 82.81 °C to 88.60 °C and decomposition temperature from 287.61 °C to 305.59 °C as compared to pristine PVC. The thermal conductivity of the graphite/MgO/PVC composite at optimum conditions was 0.8791 W m−1 K−1, which was 6.27 times higher than that of pristine PVC. The mechanical properties such as the tensile strength and bending strength of graphite/MgO/PVC composites were also augmented as compared to pristine PVC, graphite/PVC and MgO/PVC composites. Due to the enhanced thermal properties of the newly designed graphite/MgO/PVC composites, they have potential as alternatives to classical PVC-based materials in thermal and many other target field-based applications.
- 15 January 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (4) , 2116-2124
Open AccessFabrication of graphite/MgO-reinforced poly(vinyl chloride) composites by mechanical activation with enhanced thermal properties
In this study, a mechanical activation (MA) approach was developed to fabricate graphite/MgO-reinforced poly(vinyl chloride) (PVC) composites with superior thermal properties. The composites were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and differential thermogravimetric (DTG) analysis. SEM results revealed uniformly dispersed graphite and MgO flakes in a PVC matrix and the successful formation of a thermal network by MA, which led to enhanced thermal conductivity. DSC and TGA results of the composites showed enhancement in the glass transition temperature (Tg) from 82.81 °C to 88.60 °C and decomposition temperature from 287.61 °C to 305.59 °C as compared to pristine PVC. The thermal conductivity of the graphite/MgO/PVC composite at optimum conditions was 0.8791 W m−1 K−1, which was 6.27 times higher than that of pristine PVC. The mechanical properties such as the tensile strength and bending strength of graphite/MgO/PVC composites were also augmented as compared to pristine PVC, graphite/PVC and MgO/PVC composites. Due to the enhanced thermal properties of the newly designed graphite/MgO/PVC composites, they have potential as alternatives to classical PVC-based materials in thermal and many other target field-based applications.
- Open Access
- 10 January 2019
- Published by Springer Nature in Biotechnology for Biofuels
- Vol. 12 (1) , 1-15
Overcoming biomass recalcitrance by synergistic pretreatment of mechanical activation and metal salt for enhancing enzymatic conversion of lignocellulose
Due to biomass recalcitrance, including complexity of lignocellulosic matrix, crystallinity of cellulose, and inhibition of lignin, the bioconversion of lignocellulosic biomass is difficult and inefficient. The aim of this study is to investigate an effective and green pretreatment method for overcoming biomass recalcitrance of lignocellulose. An effective mechanical activation (MA) + metal salt (MAMS) technology was applied to pretreat sugarcane bagasse (SCB), a typical kind of lignocellulosic biomass, in a stirring ball mill. Chlorides and nitrates of Al and Fe showed better synergistic effect with MA, especially AlCl3, ascribing to the interaction between metal salt and oxygen-containing groups induced by MA. Comparative studies showed that MAMS pretreatment effectively changed the recalcitrant structural characteristics of lignocellulosic matrix and reduced the inhibitory action of lignin on enzymatic conversion of SCB. The increase in hydroxyl and carboxyl groups of lignin induced by MAMS pretreatment led to the increase of its hydrophilicity, which could weaken the binding force between cellulase and lignin and reduce the nonproductive binding of cellulase enzymes to lignin. MAMS pretreatment significantly enhanced the enzymatic digestibility of polysaccharides substrate by overcoming biomass recalcitrance without the removal of lignin from enzymatic hydrolysis system.
- 10 January 2019
- Published by Springer Nature in Biotechnology for Biofuels
- Vol. 12 (1) , 1-15
Open AccessOvercoming biomass recalcitrance by synergistic pretreatment of mechanical activation and metal salt for enhancing enzymatic conversion of lignocellulose
Due to biomass recalcitrance, including complexity of lignocellulosic matrix, crystallinity of cellulose, and inhibition of lignin, the bioconversion of lignocellulosic biomass is difficult and inefficient. The aim of this study is to investigate an effective and green pretreatment method for overcoming biomass recalcitrance of lignocellulose. An effective mechanical activation (MA) + metal salt (MAMS) technology was applied to pretreat sugarcane bagasse (SCB), a typical kind of lignocellulosic biomass, in a stirring ball mill. Chlorides and nitrates of Al and Fe showed better synergistic effect with MA, especially AlCl3, ascribing to the interaction between metal salt and oxygen-containing groups induced by MA. Comparative studies showed that MAMS pretreatment effectively changed the recalcitrant structural characteristics of lignocellulosic matrix and reduced the inhibitory action of lignin on enzymatic conversion of SCB. The increase in hydroxyl and carboxyl groups of lignin induced by MAMS pretreatment led to the increase of its hydrophilicity, which could weaken the binding force between cellulase and lignin and reduce the nonproductive binding of cellulase enzymes to lignin. MAMS pretreatment significantly enhanced the enzymatic digestibility of polysaccharides substrate by overcoming biomass recalcitrance without the removal of lignin from enzymatic hydrolysis system.
- Open Access
Solid-Phase Synthesis of Cellulose Acetate Butyrate as Microsphere Wall Materials for Sustained Release of Emamectin Benzoate
Emamectin benzoate (EB), a widely used pesticide, is prone to decomposition by ultraviolet light and suffers from the corresponding loss of efficacy. The timed release of EB based on microspheres is one of the effective methods to solve this issue. As a non-toxic cellulose ester, cellulose acetate butyrate (CAB) is regarded as one of the best wall-forming materials for microcapsules with a good controlled release performance. Herein, two methods—mechanical activation (MA) technology and a conventional liquid phase (LP) method—were employed to synthesize different CABs, namely CAB-MA and CAB-LP, respectively. The molecular structure, rheological property, and thermal stability of these CABs were investigated. The two CABs were used to prepare microspheres for the loading and release of EB via an o/w (oil-in-water) solvent evaporation method. Moreover, the performances such as drug loading, drug entrapment, and anti-photolysis of the drug for these microspheres were studied. The results showed that both CABs were available as wall materials for loading and releasing EB. Compared with CAB-LP, CAB-MA presented a lower molecular weight and a narrower molecular weight distribution. Moreover, the MA method endowed the CAB with more ester substituent groups and less crystalline structure in comparison to the LP method, which had benefits including pelletizing and drug loading.
Open AccessSolid-Phase Synthesis of Cellulose Acetate Butyrate as Microsphere Wall Materials for Sustained Release of Emamectin Benzoate
Emamectin benzoate (EB), a widely used pesticide, is prone to decomposition by ultraviolet light and suffers from the corresponding loss of efficacy. The timed release of EB based on microspheres is one of the effective methods to solve this issue. As a non-toxic cellulose ester, cellulose acetate butyrate (CAB) is regarded as one of the best wall-forming materials for microcapsules with a good controlled release performance. Herein, two methods—mechanical activation (MA) technology and a conventional liquid phase (LP) method—were employed to synthesize different CABs, namely CAB-MA and CAB-LP, respectively. The molecular structure, rheological property, and thermal stability of these CABs were investigated. The two CABs were used to prepare microspheres for the loading and release of EB via an o/w (oil-in-water) solvent evaporation method. Moreover, the performances such as drug loading, drug entrapment, and anti-photolysis of the drug for these microspheres were studied. The results showed that both CABs were available as wall materials for loading and releasing EB. Compared with CAB-LP, CAB-MA presented a lower molecular weight and a narrower molecular weight distribution. Moreover, the MA method endowed the CAB with more ester substituent groups and less crystalline structure in comparison to the LP method, which had benefits including pelletizing and drug loading.