RBRobert H. Bischof

Robert H. Bischof

*This is an algorithmically generated author record based on publicly available information.

Robert H. Bischof has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Bioelectrorefinery of furfural to furfuryl alcohol in aqueous media

    by Maria Wolfsgruber, Robert Bischof, Christian Paulik, Adam Slabon, Bruno Rodrigues

    Electrocatalytic hydrogenation of furfural to furfuryl alcohol represents a sustainable approach to utilizing renewable energy for producing bio-based platform chemicals. However, low Faraday efficiencies (FEs) and the use of organic solvents with high environmental impacts often render the process less sustainable than classical catalytic hydrogenation. In this study, a two-compartment and three-electrode setup at ambient temperature and atmospheric pressure, featuring various electrodes (Ag, Au, CP, Cu, Pt, Sn, and a gold-coated silver wire (AucAg)), and biomass-derived electrolytes (acetic acid, levulinic acid, and sodium acetate), was tested. AucAg, serving as an electrocatalyst with 1 M sodium acetate as electrolyte, exhibited the best combination of FE and furfuryl alcohol yield with 82% and 37%, respectively. The optimum conditions were achieved at 100 rpm and −0.8 V vs. RHE. Scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) analyzes indicated no significant influence of the substances on the working electrode during the reaction. Since the identity of the cation of the electrolyte influences the electrode-electrolyte microenvironment, multiple alkali metals were trialed. Sodium ion as the counter ion emerged on top, surpassing potassium, and cesium ions for the electroreduction of furfural to furfuryl alcohol. This preference could be attributed to the competing hydrogen evolution reaction favored by Cs over K and Na. In this perspective, the highlights of a bioelectrorefinery concept for creating a bio-derived platform chemical in a sustainable solvent with green electrons are demonstrated and optimized.

  • Open Access

    Simultaneous posthydrolysis and liquid–liquid extraction: a SIMPLLE process to detoxify eucalyptus prehydrolysis liquor

    by Lukas Almhofer, Christian Paulik, Robert H. Bischof

    The prehydrolysis liquor from the prehydrolysis Kraft process is rich in sugars and could thus serve as a sustainable feedstock for the production of various chemicals. However, its industrial utilization is impeded by the presence of fermentation inhibitors and extensive lignin precipitation, the latter receiving only little attention in the literature.In order to provide a feedstock suitable for biotechnological or chemical conversion, the prehydrolysis liquor from eucalyptus wood must be detoxified whilst preventing the precipitation of lignin. To increase the yield of monomeric sugars, acid posthydrolysis should be investigated.Various solvents and solvent mixtures were screened for the high temperature liquid–liquid extraction of isothermally separated prehydrolysis liquor. Their capability to prevent lignin precipitation and to extract fermentation inhibitors was assessed using mass balances and size-exclusion chromatography. Based on the solvent screening, a process for simultaneous posthydrolysis and liquid–liquid extraction of eucalyptus prehydrolysis liquor was proposed and investigated using statistic experimental design.Liquid–liquid extraction using aliphatic alcohols effectively prevents lignin precipitation, and the addition of 25% (w/w) tri-n-octylamine was found to increase the overall inhibitor extraction efficiency. The conditions for the simultaneous posthydrolysis were investigated using a Box-Behnken experimental design, allowing for a maximum monomeric sugar yield of 83.0% at a sugar purity of 91.6%.The simultaneous posthydrolysis and liquid-liquid extraction (SIMPLLE) process thus avoids industrial-level problems associated with lignin precipitation. It provides a carbohydrate-rich stream with low levels of fermentation inhibitors, enabling further conversion to value added products.


  • Open Access

    Intermolecular Interactions in the Membrane Filtration of Highly Alkaline Steeping Lye

    by Klaus Schlackl, Richard Herchl, Lukas Almhofer, Robert H. Bischof, Karin Fackler, Wolfgang Samhaber

    The reuse of steeping lye is crucial for the sustainable production of viscose fibers. Steeping lye contains hemicellulose and many alkaline degradation products, such as organic acids, so that its purification can be evaluated in terms of total organic carbon removal. When considering purification by membrane filtration, intermolecular interactions between hemicellulose and organic acids can strongly affect their retention efficiency. Herein, we give more insights into the ultrafiltration and nanofiltration of steeping lye and corresponding model solutions. Furthermore, we studied the impact of total organic carbon concentration, hemicellulose concentration and sodium hydroxide concentration on the membrane performance. Hydrogen bonds between hemicellulose and certain types of hydroxy acids increased the retention of the latter. In contrast, charge based repulsion forces led to a decreased retention of a certain type of hydroxy acids. It can be clearly shown that taking intermolecular interactions into account is highly important for the description of complex multicomponent mixtures. In addition, the results can be extended to other, highly alkaline process streams with organic content, such as Kraft pulping liquors.


  • A solid-phase extraction method that eliminates matrix effects of complex pulp mill effluents for the analysis of lipophilic wood extractives

    by Sebastian España Orozco, Philipp Zeitlinger, Karin Fackler, Robert H. Bischof, Antje Potthast

    The extraction of lipophilic wood extractives from pulp and paper process waters proves to be a challenging task, due to harsh and alternating process and sample conditions. This study has determined the potential use of polymeric sorbents for solid-phase extraction (SPE) and compared to classical silica-based reversed-phase packed columns, with polymeric hydrophilic-lipophilic balanced (HLB) cartridges being the sorbent with the most potential. Recovery functions were obtained with an internal standard mixture representative for the main lipophilic wood extractive groups, which are fatty acids and alcohols, sterols, sterol esters and triglycerides. The impact of pH, sample volume and sample matrix, expressed as TOC and cations, on the retention behavior of lipophilic extractives during SPE of industrial samples were determined with polymeric HLB sorbent. High variations in the composition of pulp mill matrices led to different optimal extraction conditions. Thus, a new SPE protocol was developed, which bypasses matrix interferences and omits the loss of analytes due to sample preparation. The method is applicable to different pulp mill effluents with large discrepancies in pH and sample matrices, resulting in recoveries >90 % with RSD <5 % for all lipophilic wood extractives.


  • Open Access

    Effects of Caustic Extraction on Properties of Viscose Grade Dissolving Pulp

    by Cindy Friebel, Robert H. Bischof, Gabriele Schild, Karin Fackler, Ireen Gebauer

    Viscose, a cellulose-based commodity fibre, is produced by pulping and bleaching of wood, yielding a high quality “dissolving pulp” which is then spun. During pulping and bleaching, effective hemicellulose extraction is required to allow fibre production. We present a design of experiments (DoE) approach to optimise caustic extraction in a total chlorine free (TCF) bleaching sequence (O-CE-Z-P) of beech wood sulphite pulp. Temperature and sodium hydroxide concentration were varied to identify highest xylan extraction yield, and a maximum xylan removal of 83% was achieved at 20 °C and 120 g/L NaOH. Additionally, caustic extraction conditions were derived from the DoE model that led to pulps with high yield, high alpha cellulose content or uniform cellulose molecular weight distribution. Pulps from verification experiments exhibited good reactivity in viscose application tests. Hence, the presented O-CE-Z-P bleaching sequence can be considered as suitable for integrated viscose fibre production. We assume that the presented caustic extraction model will be useful for pulp and biorefinery researchers who work on caustic biorefinery processes involving hardwood feedstocks.