Longfei Wu

Disentangling the roles of nitrogen dopants and vacancy defects (VG) in metal-free carbon catalysts for the oxygen reduction reaction (ORR) ideally requires studying both the dopants and defects separately. Here, we systematically introduced nitrogen dopants and VGs via plasma treatment into the basal plane of monolayer graphene as a model carbon catalyst to investigate their specific roles in ORR catalysis. An increased defect density including dopants is positively associated with boosted ORR activity. Nitrogen dopants are responsible for an improved current via a 2e^- pathway generating hydroperoxide, while VGs result in enhanced kinetics and water production. We therefore infer that VGs in graphene are responsible for the improved ORR kinetics, while nitrogen dopants majorly influence the selectivity of ORR reaction products. The nitrogen dopants without VGs lead to a higher overpotential compared with the pristine graphene. Instead of the attribution of the ORR active site to only nitrogen species in carbon materials, the improved ORR activity in nitrogen-doped carbon materials should be attributed to the active sites constituted of VGs, oxygen dopants, and nitrogen dopants. Through this work, we provide important insights into the intertwined roles of nitrogen and VGs as well as oxygen dopants in nitrogen-doped metal-free catalysts for a more efficient ORR.

Controlling the selectivity of the electrocatalytic reduction of carbon dioxide into value-added chemicals continues to be a major challenge. Bulk and surface lattice strain in nanostructured electrocatalysts affect catalytic activity and selectivity. Here, we unravel the complex dynamics of synergistic lattice strain and stability effects of Cu-Ag tandem catalysts through a previously unexplored combination of in situ nanofocused X-ray absorption spectroscopy and Bragg coherent diffraction imaging. Three-dimensional strain maps reveal the lattice dynamics inside individual nanoparticles as a function of applied potential and product yields. Dynamic relations between strain, redox state, catalytic activity and selectivity are derived. Moderate Ag contents effectively reduce the competing evolution of H₂ and, concomitantly, lead to an enhanced corrosion stability. Findings from this study evidence the power of advanced nanofocused spectroscopy techniques to provide new insights into the chemistry and structure of nanostructured catalysts.

The activity and selectivity of a copper electrocatalyst during the electrochemical CO₂ reduction reaction (eCO₂RR) are largely dominated by the interplay between local reaction environment, the catalyst surface, and the adsorbed intermediates. In situ characterization studies have revealed many aspects of this intimate relationship between surface reactivity and adsorbed species, but these investigations are often limited by the spatial and temporal resolution of the analytical technique of choice. Here, Raman spectroscopy with both space and time resolution was used to reveal the distribution of adsorbed species and potential reaction intermediates on a copper electrode during eCO₂RR. Principal component analysis (PCA) of the in situ Raman spectra revealed that a working electrocatalyst exhibits spatial heterogeneities in adsorbed species, and that the electrode surface can be divided into CO-dominant (mainly located at dendrite structures) and C-C dominant regions (mainly located at the roughened electrode surface). Our spectral evaluation further showed that in the CO-dominant regions, linear CO was observed (as characterized by a band at ∼2090 cm^-1), accompanied by the more classical Cu-CO bending and stretching vibrations located at ∼280 and ∼360 cm^-1, respectively. In contrast, in the C-C directing region, these three Raman bands are suppressed, while at the same time a band at ∼495 cm^-1 and a broad Cu-CO band at ∼2050 cm^-1 dominate the Raman spectra. Furthermore, PCA revealed that anodization creates more C-C dominant regions, and labeling experiments confirmed that the 495 cm^-1 band originates from the presence of a Cu-C intermediate. These results indicate that a copper electrode at work is very dynamic, thereby clearly displaying spatiotemporal heterogeneities, and that in situ micro-spectroscopic techniques are crucial for understanding the eCO₂RR mechanism of working electrocatalyst materials.

At the nanoscale, the properties of materials depend critically on the presence of crystal defects. However, imaging and characterizing the structure of defects in three dimensions inside a crystal remain a challenge. Here, by using Bragg coherent diffraction imaging, we observe an unexpected anomalous {110} glide plane in two Pt submicrometer crystals grown by very different processes and having very different morphologies. The structure of the defects (type, associated glide plane, and lattice displacement) is imaged in these faceted Pt crystals. Using this noninvasive technique, both plasticity and unusual defect behavior can be probed at the nanoscale.

Oxide-derived copper electrodes have displayed a boost in activity and selectivity toward valuable base chemicals in the electrochemical carbon dioxide reduction reaction (CO2RR), but the exact interplay between the dynamic restructuring of copper oxide electrodes and their activity and selectivity is not fully understood. In this work, we have utilized time-resolved surface-enhanced Raman spectroscopy (TR-SERS) to study the dynamic restructuring of the copper (oxide) electrode surface and the adsorption of reaction intermediates during cyclic voltammetry (CV) and pulsed electrolysis (PE). By coupling the electrochemical data to the spectral features in TR-SERS, we study the dynamic activation of and reactions on the electrode surface and find that CO₂ is already activated to carbon monoxide (CO) during PE (10% Faradaic efficiency, 1% under static applied potential) at low overpotentials (-0.35 V_RHE). PE at varying cathodic bias on different timescales revealed that stochastic CO is dominant directly after the cathodic bias onset, whereas no CO intermediates were observed after prolonged application of low overpotentials. An increase in cathodic bias (-0.55 V_RHE) resulted in the formation of static adsorbed CO intermediates, while the overall contribution of stochastic CO decreased. We attribute the low-overpotential CO₂-to-CO activation to a combination of selective Cu(111) facet exposure, partially oxidized surfaces during PE, and the formation of copper-carbonate-hydroxide complex intermediates during the anodic pulses. This work sheds light on the restructuring of oxide-derived copper electrodes and low-overpotential CO formation and highlights the power of the combination of electrochemistry and time-resolved vibrational spectroscopy to elucidate CO2RR mechanisms.

The presence of defects and chemical dopants in metal-free carbon materials plays an important role in the electrocatalysis of the oxygen reduction reaction (ORR). The precise control and design of defects and dopants in carbon electrodes will allow the fundamental understanding of activity-structure correlations for tailoring catalytic performance of carbon-based, most particularly graphene-based, electrode materials. Herein, we adopted monolayer graphene – a model carbon-based electrode – for systematical introduction of nitrogen and oxygen dopants, together with vacancy defects, and studied their roles in catalyzing ORR. Compared to pristine graphene, nitrogen doping exhibited a limited effect on ORR activity. In contrast, nitrogen doping in graphene predoped with vacancy defects or oxygen enhanced the activities at 0.4 V vs the reversible hydrogen electrode (RHE) by 1.2 and 2.0 times, respectively. The optimal activity was achieved for nitrogen doping in graphene functionalized with oxygenated defects, 12.8 times more than nitrogen-doped and 7.7 times more than pristine graphene. More importantly, oxygenated defects are highly related to the 4e^– pathway instead of nitrogen dopants. This work indicates a non-negligible contribution of oxygen and especially oxygenated vacancy defects for the catalytic activity of nitrogen-doped graphene.

At the nanoscale, elastic strain and crystal defects largely influence the properties and functionalities of materials. The ability to predict the structural evolution of catalytic nanocrystals during the reaction is of primary importance for catalyst design. However, to date, imaging and characterising the structure of defects inside a nanocrystal in three-dimensions and in situ during reaction has remained a challenge. We report here an unusual twin boundary migration process in a single platinum nanoparticle during CO oxidation using Bragg coherent diffraction imaging as the characterisation tool. Density functional theory calculations show that twin migration can be correlated with the relative change in the interfacial energies of the free surfaces exposed to CO. The x-ray technique also reveals particle reshaping during the reaction. In situ and non-invasive structural characterisation of defects during reaction opens new avenues for understanding defect behaviour in confined crystals and paves the way for strain and defect engineering.

The electrocatalytic carbon dioxide (CO₂) reduction reaction (CO₂RR) into hydrocarbons is a promising approach for greenhouse gas mitigation, but many details of this dynamic reaction remain elusive. Here, time‐resolved surface‐enhanced Raman spectroscopy (TR‐SERS) is employed to successfully monitor the dynamics of CO₂RR intermediates and Cu surfaces with sub‐second time resolution. Anodic treatment at 1.55 V vs. RHE and subsequent surface oxide reduction (below −0.4 V vs. RHE) induced roughening of the Cu electrode surface, which resulted in hotspots for TR‐SERS, enhanced time resolution (down to ≈0.7 s) and fourfold improved CO₂RR efficiency toward ethylene. With TR‐SERS, the initial restructuring of the Cu surface was followed (−1, is related to C−C coupling and ethylene production (−0.9 V vs. RHE), whereas lower cathodic bias (−0.7 V vs. RHE) resulted in gaseous CO production from isolated and static CO surface species with a distinct vibration at 2092 cm⁻¹.

The electrocatalytic carbon dioxide (CO₂) reduction reaction (CO₂RR) into hydrocarbons is a promising approach for greenhouse gas mitigation, but many details of this dynamic reaction remain elusive. Here, time‐resolved surface‐enhanced Raman spectroscopy (TR‐SERS) is employed to successfully monitor the dynamics of CO₂RR intermediates and Cu surfaces with sub‐second time resolution. Anodic treatment at 1.55 V vs. RHE and subsequent surface oxide reduction (below −0.4 V vs. RHE) induced roughening of the Cu electrode surface, which resulted in hotspots for TR‐SERS, enhanced time resolution (down to ≈0.7 s) and fourfold improved CO₂RR efficiency toward ethylene. With TR‐SERS, the initial restructuring of the Cu surface was followed (−1, is related to C−C coupling and ethylene production (−0.9 V vs. RHE), whereas lower cathodic bias (−0.7 V vs. RHE) resulted in gaseous CO production from isolated and static CO surface species with a distinct vibration at 2092 cm⁻¹.