HWHeng Wang

Heng Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Heng Wang has a total of 271 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Encoding metal coordination pathways and nuclearity by molecular knotting

    by Guanyu Chi, Bo Li, Hai-Na Feng, Zhi-Hui Zhang, Heng Wang, Xiaopeng Li, Liang Zhang

    Precise control over the nuclearity and spatial organization of metal ions is a central objective in coordination chemistry. Knotting imposes severe geometric constraints on frameworks but has rarely been exploited to organize inequivalent metal-binding sites within a single ligand. Here we report that a molecular cinquefoil knot containing both bidentate and tridentate chelating sites enables programmed metal-ion coordination pathways. Direct metalation affords Mn(II) 5 -, Fe(II) 5 -, Co(II) 5 -, and Cd(II) 5 -knots through a dinuclear intermediate and an unusual 2-to-5 metal nuclearity progression, even though these metals do not template knot formation. Crystallization of a Mn(II) 2 -intermediate reveals partial demetalation but retains a Mn(II) center displaying a “3 + 3” coordination mode, whereas all Fe(II) ions in the fully metalated Fe(II) 5 -knot adopt a “3 + 2” binding geometry. Together with computational simulations, these observations support a stepwise metalation mechanism in which the dinuclear “3 + 3” coordination environment evolves into the “3 + 2” motif of the pentanuclear knot. Although the Ni(II) 5 - knot cannot be obtained by direct metalation because of slow incorporation, it forms readily via transmetalation from a Zn(II) 5 -knot. Circular dichroism measurements show that chiral expression is dictated by the overall ligand arrangement rather than the identity of the metal ions. The work demonstrates molecular knotting as a strategy for pathway-controlled multi-metallic assembly.

  • NDI‐Based Chiral Covalent Porphyrin Cages Constructed by Imine Condensation Reaction

    by Xiaoyan Dong, Yi Li, Zhenqi Shi, Yangyang Wang, Minjian Liao, Zibin Zhang, Yingbo Lu, Yongshu Xie, Heng Wang, Shuping Wang, et al.

    Chiral imine cages featuring an aromatic cavity are developed employing naphthalene diimide and porphyrin subunits via imine condensation reaction. The structures are characterized by NMR, MALDI‐TOF mass spectrometry, UV–vis and, circular dichroism (CD) spectroscopy. Furthermore, the configuration of one type of the imine cage was confirmed by single‐crystal x‐ray diffraction. Self‐sorting studies were further performed. When different‐sized porphyrin monomers of equal molar amounts and naphthalene diimide ligands are mixed and subjected to self‐assembly reactions, two distinct types of porphyrin imine cages can be obtained. Aromatic guest coronene can be efficiently encapsulated within the imine cages, where coronene engages in supramolecular π–π interactions with the two porphyrin planes. This work constructs complex NDI‐based chiral covalent porphyrin cages using relatively simple precursor units, which are anticipated to find applications in fields like host–guest recognition and catalysis.

  • Open Access

    Iterative Exponential Growth Syntheses of Gear-Like Porphyrin Arrays for Photocatalysis

    by Minjian Liao, Yufei Liu, Yinzhi Zhu, Xinghao Li, Mingyi Yang, Mianling Huang, Fuying Wang, Xiaoxuan Su, Xiaopeng Mei, Desheng Li, et al.

    Porphyrin arrays are attractive owing to their discrete structures and tunable photoelectronic properties. The scalable synthesis of large and size‑defined covalent bonds linked porphyrin arrays, however, remains a longstanding challenge, which indeed hampers their applications. Herein, we report a synthetic approach based on macrocyclic scaffold construction followed by porphyrin installation and metalation. By integrating iterative exponential growth, pseudo‑high‑dilution cyclization, and one‑step multi‑porphyrin installation, three macrocycles containing 8, 16, or 32 porphyrin units (C‑8P, C‑16P, and C‑32P) are prepared on a gram scale over 10–14 steps. After metalation, the Co‑metalated porphyrin arrays are further employed as molecular catalysts for light‑driven acetylene semi‑hydrogenation to ethylene. Among them, C‑32Co exhibits the strongest photocurrent response and highest photocatalytic activity, revealing a distinct size-dependent effect in the photoinduced response and catalytic performance. As such, this work provides a scalable route to precisely‑defined porphyrin arrays and reveals their size‑dependent cooperativity in photoelectronic and catalytic functions.

  • Open Access

    Adaptive Coordination Engineering for Efficient and Robust H 2 Release

    by Xiaolin Jiang, Xiaoyang Yan, Shenglong Jiang, Hongdan Zhu, Heng Wang, Xiaopeng Li, Xiaochun Zhou, Mingdong Zhou, Qian Peng

    Efficient regulation of β‐H activation and its subsequent elimination remains a notorious challenge owing to stringent inherent geometric and electronic constraints. To overcome the high kinetic barriers, it necessitates a precise catalyst to effectively orchestrate the metal‐substrate interaction. Herein, we report a molecular Pd 1 ‐Ag 2 model using a tridentate phosphine ligand ( L2 ) and formate bridges, which integrates the effect of double silver synergy and nitrate anion regulation, and serves as the core origin to facilitate efficient β‐H elimination. Such bimetallic cooperation optimizes the reaction pathway and realizes rapid hydrogen production with complete CO‐free characteristics, endowing prominent industrial advantages over monometallic counterparts. Under ambient air at 60°C, this catalyst delivers excellent activity and satisfactory recyclability. DFT calculations confirm that the rate‐determining β‐H elimination step of monometallic Pd systems is effectively optimized, and in situ spectroscopic measurements further verify the stable proximal Pd‐Ag synergistic coordination throughout the reaction.

  • Cooperative Sulfate Binding Drives Hierarchical Assembly of Supramolecular Trimers

    by Cheng Jin, Ji Wang, Na Li, Le Dai, Zhiwen Sun, Li Yan, Kanglei Liu, Fang Fang, Heng Wang, Wei Zhao, et al.

    Metallosupramolecular assembly traditionally employs rigid ligands to ensure structural predictability, yet flexible ligands‐based assembly remains a formidable challenge due to their conformational indeterminacy. In this study, we report a unique supramolecular trimer assembled from a flexible tripodal ligand, where each arm features a bis(urea) anion‐binding site and a terminal pyridine metal‐binding site. Upon coordination with sulfate and Pd 2+ or Pt 2+ , sulfate–bis(urea) hydrogen‐bonding directs the spatial arrangement of pyridine units. Single‐crystal x‐ray diffraction reveals racemic mixtures of supramolecular trimers with clockwise ( M ) or counterclockwise ( P ) helicity, composed of three stacked figure‐eight subunits and resembling the morphology of a Calochortus venustus tulip. Such assembly is co‐stabilized by metal–pyridine coordination (first‐sphere coordination), N–H···O/C–H···O H‐bonding with sulfates (second‐sphere coordination), and sulfate–Pd 2+ electrostatic attraction. The trimer remains stable in solution, as confirmed by NMR, DOSY, and ESI‐MS experiments. Concentration‐dependent NMR studies elucidate a multistep assembly pathway from a 1:1 sulfate complex, through a figure‐eight subunit, to the final architecture. Moreover, replacing the non‐coordinating pyridine unit with a chiral group successfully induces enantiopure trimers. This work establishes a paradigm of anion‐dictated assembly through cooperative first‐ and second‐sphere coordination, offering a new avenue for supramolecular assemblies.


  • Cooperative Sulfate Binding Drives Hierarchical Assembly of Supramolecular Trimers

    by Cheng Jin, Ji Wang, Na Li, Le Dai, Zhiwen Sun, Li Yan, Kanglei Liu, Fang Fang, Heng Wang, Wei Zhao, et al.

    Metallosupramolecular assembly traditionally employs rigid ligands to ensure structural predictability, yet flexible ligands‐based assembly remains a formidable challenge due to their conformational indeterminacy. In this study, we report a unique supramolecular trimer assembled from a flexible tripodal ligand, where each arm features a bis(urea) anion‐binding site and a terminal pyridine metal‐binding site. Upon coordination with sulfate and Pd 2+ or Pt 2+ , sulfate–bis(urea) hydrogen‐bonding directs the spatial arrangement of pyridine units. Single‐crystal x‐ray diffraction reveals racemic mixtures of supramolecular trimers with clockwise ( M ) or counterclockwise ( P ) helicity, composed of three stacked figure‐eight subunits and resembling the morphology of a Calochortus venustus tulip. Such assembly is co‐stabilized by metal–pyridine coordination (first‐sphere coordination), N–H···O/C–H···O H‐bonding with sulfates (second‐sphere coordination), and sulfate–Pd 2+ electrostatic attraction. The trimer remains stable in solution, as confirmed by NMR, DOSY, and ESI‐MS experiments. Concentration‐dependent NMR studies elucidate a multistep assembly pathway from a 1:1 sulfate complex, through a figure‐eight subunit, to the final architecture. Moreover, replacing the non‐coordinating pyridine unit with a chiral group successfully induces enantiopure trimers. This work establishes a paradigm of anion‐dictated assembly through cooperative first‐ and second‐sphere coordination, offering a new avenue for supramolecular assemblies.


  • Constructing Metallo-Supramolecular Cuboctahedra Incorporating Flexible Alkyl-Diamines via Postassembly Ligand Exchange

    by Yu Qiu, Yaqi Hu, Yunpeng Cui, Xiaoxuan Su, Lingang Zhao, Na Li, Xiujun Yu, Zhi Chen, Heng Wang, Xiaopeng Li

    Coordination-driven self-assembly offers a powerful toolkit for constructing sophisticated functional architectures. Rigid ligands are widely employed as building blocks in metallo-supramolecular chemistry due to their structural predictability during self-assembly. In contrast, flexible building blocks─though capable of offering greater structural diversity and stimuli-responsiveness─are rarely used, as their conformational freedom often complicates structural control. Consequently, the integration of flexible ligands into metallo-supramolecular systems remains underexplored. To address this challenge, we employ a postassembly ligand-exchange approach to construct a series of heteroleptic metallo-supramolecular cuboctahedra incorporating both rigid and flexible ligands. Investigations of chain length dependence reveal that flexible alkyl-diamine incorporation affects cage hydrodynamic size and stability, with optimal stability achieved at 8 units. This combined bottom-up and top-down synthetic approach offers a promising strategy for engineering complex architectures from flexible building blocks for further exploration of chemistry within a confined space.


  • Open Access

    Axial‐Chiral Vertex Integration Strategy for the Construction of a High‐Affinity, Homochiral Pd 4 L 2 Cage

    by Haiting Di, Yi Zhou, Han Han, Rong Fu, Zi‐Hang Song, Si‐Dan Guo, Qing‐Yu Zhao, Tingting Zhang, Fang‐Yuan Chen, Heng Wang, et al.

    Metal–organic cages (MOCs) are versatile supramolecular platforms, but their modest binding affinities in aqueous solution limit practical utility. Chiral MOCs with enhanced binding capabilities are highly desirable for diverse applications, yet their synthesis remains challenging. Here, we report an “Axial‐Chiral Vertex Integration” (ACVI) strategy, which enables the construction of an enantiopure chiral cage ( MOC‐2 ) from a non‐chiral Pd 6 L 4 MOC ( MOC‐1 ) by substituting two axial Pd vertices with axially chiral BINOL units. This design strengthened the hydrophobic effect of the confined cavity, delivering ultrahigh aqueous binding affinity (up to 10 9 M −1 ) for MOCs. At the same time, the integration of a well‐defined chiral microenvironment endows MOC‐2 with notable enantioselectivity (up to 9.2) and the ability to transfer chirality to achiral guests, producing significant circularly polarized luminescence (| g lum | up to 10 −3 ). This strategy provides a powerful blueprint for designing high‐affinity chiral MOCs, unlocking opportunities in molecular recognition and advanced chiral functional materials.


  • Rapid and highly sensitive mass spectrometric detection of n-alkanes via a novel photoionization-induced nitrogen dioxide cation chemical ionization source

    by Baimao Zhang, Bo Li, Lei Hua, Zhigang Fan, Guolong Wang, Hang Li, Heng Wang, Xiaopeng Li, Jichun Jiang, Haiyang Li


  • Open Access

    Synergistic regulation of metal–organic cage architectures via temperature- and solvent-driven atropisomerism

    by Jiaqi Liang, Li-Jun Peng, Ke-Lin Zhu, Zhi-Ao Li, Xu-Lang Chen, Yu-Dong Yang, Qian Li, Qian-Nan Bi, Jie Cui, Ai-Jiao Guan, et al.

    Regulating multistimulus responses in artificial systems remains a challenge in smart material development. We present a versatile chemical switching system that precisely controls the self-assembly of metal–organic cages via temperature and solvent changes. The key component, cyclo[2](1,3-(4,6-dimethyl)benzene) (4-pyridine)[6](1,3-(4,6-dimethyl)benzene) ( CP2 ), was generated as three atropisomers ( 1 , 2 , and 3 ) with C s , C 1 , and C 2v symmetries. Thermally, metastable isomers ( 1 and 2 ) convert into the stable isomer ( 3 ), which reacts with Pd 2+ to form specific molecular cages. Depending on the solvent, either rectangular M 2 L 2 cages ( 5′ and 5 ) form in 1,4-dioxane or hexagonal M 3 L 3 cages ( 6 ) in 1,1′,2,2′-tetrachloroethane. The solvent dictates the cage type and enables reversible transformation between cages 5 and 6 . Additionally, cage 5 ′, formed from metastable isomer 1 , can switch to other cage types (i.e., 5 or 6 ) depending on temperature and solvent conditions. This multipathway system offers a precise strategy for controlling self-assembly in smart materials.