KKKseniya Kovaleva

Kseniya Kovaleva

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Kseniya Kovaleva has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    GOLDEN HORDE BRACELETS FROM THE LOWER VOLGA REGION MONUMENTS (PRODUCTION TECHNIQUE AND ELEMENTAL COMPOSITION)

    by Kseniya Kovaleva

    A series of 13 bracelets from the Golden Horde period (second half of the 13th – 14th century AD) originating from urban and burial monuments of the Lower Volga region was studied using X-ray fluorescence (XRF) analysis to determine their elemental composition; the main manufacturing techniques were also identified. The items presented in the sample belong to the common types of Golden Horde bracelets – wire and plate, with variations of ornaments and their combinations characteristic of the Golden Horde monuments of the Lower Volga and Bulgarian regions, as well as among the Mordvin population of this period. The following main technological schemes were identified: casting with minor mechanical deformation (bending), casting with pressure finishing (forging, drawing, cutting), and forging. The decoration of the bracelets was either cast together with the body or applied by chasing (traces of three types of chasing were identified) and/or engraving. The majority (11 out of 13) of the bracelets were made of brass; the average zinc content in these suggests a likely intent to preserve the golden color of the alloy, imitating precious metal. Two items were made of other metals – unalloyed copper and high-grade two-component silver. Comparison with samples of rural monuments in the Ukek area and another, Bulgarian, region of the Golden Horde showed a close relationship between the composition and type of the product – most bracelets are also made of brass with medium and high zinc content; bronze and copper are present to a lesser extent. Such a pronounced role for brass in bracelet production is absent in contemporaneous Old Russian samples. This study of a single artifact category allows us to assume that the Golden Horde craftsmen had at their disposal a sufficient amount of zinc-containing raw materials to maintain the composition of the alloy and, accordingly, control the color imitating the precious metal. However, the question of the source of brass entering the territory of the Ulus of Jochi remains open.

  • Open Access

    Lead “Contamination / Ligature” Threshold Evaluation in Copper-Based Alloys of the Golden Horde Monuments from the Lower Volga Region

    by Kseniya Kovaleva

    The article presents a study of the Golden Horde copper-based alloys to evaluate the threshold that would allow separating contaminated copper and purposefully alloyed with lead. Being a component of some types of ores, lead passed into insufficiently purified dry copper. The lead content can be overestimated in the surface corroded layer and incorrectly recorded during the analytical study of the metal composition. Thus, the contamination threshold, set for other metals at 1%, should additionally be specified for lead. Lead physical properties determine its effect on alloys of which it is a component. Its additive improves copper casting alloys properties, but in general, lead is a harmful impurity, since it contributes to the appearance of brittleness during hot forging. According to written sources, copper unrefined from lead and alloys with lead had limited application and were used for casting medium- and large-sized utensils. A study of 647 copper and copper-based alloy utensil showed that unrefined contaminated copper and its alloys with tin and zinc with a 2–3% average lead content were used for forging in addition to refined copper during the Golden Horde period in the Lower Volga region. Tin bronze and triple, multicoponent bronzes with a 3.5% average lead content were the main casting alloys. Alloys with medium and high lead content (Pb > 10) were used to a limited extent mainly for casting mass-produced objects such as belt fittings, mirrors, connecting rings, etc. It is assumed that in these cases, lead based improver had both technological benefits aimed at improving casting properties, and economic ones, reducing metal production costs. The threshold higher than 2.5–3% of the lead can be considered artificially additions in the Golden Horde alloys of the Lower Volga since these concentrations are stably recorded in forged metal that was not artificially alloyed.


  • 11th All-Russian Scientific Conference “Problems of Sarmatian Archaeology and History”

    by Mikhail Krivosheev, Volgograd State University, Kseniya Kovaleva, Vladimir Moiseev, Alexander Dyachenko

    The article summarizes the results of the All-Russian Scientific Conference with International Participation “Problems of Sarmatian Archeology and History” dedicated to the memory of Prof. Anatoly S. Skripkin. The leading theme of the conference is “Chronology and periodization of the Sauromat and Sarmatian cultures: Regional features”. The conference was held in Volgograd in May 2023 on the base of Volgograd State University.

  • Manufacturing Complexes for the Non-Ferrous Metals Processing of the Golden Horde Cities: Search for Analogies

    by Kseniya Kovaleva

    The article is devoted to the Golden Horde complexes associated with the processing of non-ferrous metals and the organization of handicraft production. Historiography has repeatedly voiced the significant role of the masters of the conquered territories in the formation of the metalworking production of the Golden Horde. In the article the characteristic features of the Golden Horde craft complexes are considered in comparison with similar complexes of Kievan Rus cities, as well as with some traditions of the organization of Central Asian craft. Data from workshops of Tsarevskoe, Uvekskoe, Bolgarskoe settlements, Staryy Orhey were brought in. The complexes are considered in terms of such parameters as location in the city planning system, type of structure, presence of smelting furnaces and hydraulic structures, set of production, range of products and coexistence with other industries. It is noted that in the cities of the Golden Horde there are various forms of organization of metalworking crafts, small workshops in craft districts and complex workshops functioning within household plots. The workshops location is not clearly defined; in general, they do not form specialized areas. The structures in which the workshops operate have no design features and may not contain heat engineering structures. Workshops for the processing of non-ferrous metals most often function in conjunction with bone carving and pottery production, less often in a composition with leather, glass making, and gemstone processing. This is significantly different from the situation in Kievan Rus cities, where the processing of non-ferrous metals is most often combined in various forms with the processing of ferrous metals. The handicraft complexes of the Golden Horde cities demonstrate a wide variety of forms, and most of them find their analogies in the materials of ancient Russian cities, therefore, it is difficult to single out specific features indicating possible genetic connections.


  • The Chemical Composition of the Medieval Mirrors from Golden Horde Time Settlements

    by Kseniya Kovaleva

    Introduction. The paper discussed the results of the study concerning the chemical composition of 16 mirrors from the Golden Horde period originating from the settlements Selitrennoe, Vodyanskoe, Uvekskoe Khmelevskoe I, Shirokiy Buerak and stored in the State Historical Museum (Moscow) and Saratov Regional Museum of Local Lore (Saratov). Method. The visual inspection of the items was carried out using the traceology method, XRF and SEM/EDS were used as a method of determining the elemental composition. To compare the results, data on the chemical composition of mirrors originating from other medieval sites in Eastern Europe were used. Analysis and Results. All but one mirror, made with a stone casting mold, were cast using the impression method. Some of the mirrors show traces of post-casting processing. Several types of alloys have been identified. Most of the mirrors were made of tin-lead bronze (7 items) with an increased (more than 20 %) tin content, which correlates with the results obtained on samples from other settlements of the pre-Horde and Horde times. Other large groups are mirrors made from multicomponent (3 items) and tin bronze (4 items). One mirror each is made of tin brass and lead bronze with the addition of arsenic. Mirrors with arsenic in their composition are also known from other samples from a nomadic cemetery of the Golden Horde period and settlement monuments, which indicates a sufficiently active existence of a more archaic metal in the 14th century.


  • MATERIALS FOR THE STUDY OF ITEMS FROM NON-FERROUS AND PRECIOUS METALS OF SELITRENNOE SETTLEMENT: CHEMICAL COMPOSITION

    by Kseniya Kovaleva

    Introduction. This paper presents the results of the study of the chemical composition of nonferrous and precious metal items from the excavations of the Selitrennoe settlement by the Volga Region Archaeological Expedition in 1986-1989 stored in the State Historical Museum. Methods and materials. XRF was used as a method of determining the elemental composition; the main technological operations were determined using the trasology method. A total of 63 subjects were analyzed, including domestic items, jewelry and items related to production. Analysis and Results. The alloys have been distinguished depending on the presence and concentration of alloying elements: brass (two-component, tin, lead, multicomponent), bronzes (tin, lead, leadarsenic, tin-lead, tin-zinc, and multicomponent) and silver alloys (multicomponent high silver bronzes and gold-silver alloy). Inclusions of soldering with silver in the solder and gilding according to the amalgamation have been also recorded. The results of the analysis show the prevalence of two-component brass and multicomponent alloys, a small amount of tin bronzes and the complete absence of items from "pure" metals - copper, tin and lead. The common practice of using recycled metal can be judged by the relatively low content of zinc in brass and a large proportion of multicomponent alloys. Despite the presence of distinguishable stable groups, a wide range of concentrations suggests the absence of clear recipes, including for certain categories of objects. The dependence of the applied technology on the composition of metal is also revealed. The sample of the Selitrennoe settlement is significantly different from other large series of analyses of the Golden Horde time (Bolgar Region, Uvek and its neighborhood).

  • Open Access

    The Results of Studying the Technique of Making Golden Horde Products Made of Non-Ferrous Metals (from the Collection of the Volgograd Regional Museum of Local Lore)

    by Kseniya Kovaleva

    Introduction. The article is devoted to the results of tracing research of things made of non-ferrous metals from the collections of Tsarevskoe, Vodyanskoe, and Mechetnoe settlements, stored in the funds of the Volgograd regional museum of local lore. Method. The author used the method of tracing. The digital microscope DigiMicro 2.0. was used to record the results of observation. Analysis. The author studied 63 products and allocated two large groups: 1) cast products and 2) forged products. The study fixed the following operations for cast products: the use of open and closed molds, casting in composite forms, casting by the smelted model, by the impression, liner casting. In group 2, the following methods of forging were singled out: forming forging, punching, drawing and forging of wire, bending, drawing, twisting, hacking, cutting. Soldering was used to connect the elements. After forming, most of the products passed the subsequent processing associated with the removal of defects (primarily post-casting) and the application of decor (hammering, engraving, stamping, polishing). In addition, the decor could be formed during the creation of the mold (cast decor). Results. As a result of the study, it was noted the use of a wide range of techniques and operations with a comparative technological simplicity for most products. It was also noticed that a few things have been specially prepared for the processing, and it demonstrates the use of secondary raw materials.