Bruno Marques Ferreira da Silva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bruno Marques Ferreira da Silva has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Luiz Marcos Garcia Gonçalves
Federal University of Rio Grande do Norte
8 shared publications - Luis Enrique Ortiz
Federal Univ. of Rio Grande do Norte,Electr. and Comp. Eng. Grad. Program,Natal,Brazil
3 shared publications - Alysson Nascimento De Lucena
Graduate Program in Mechanical Engineering, Federal University of Rio Grande do Norte (UFRN), Natal, Brazil
2 shared publications - Elizabeth V. Cabrera-Avila
Natalnet Associate Laboratories, Campus Universitário, Federal University of Rio Grande do Norte, Natal RN 59078-970, Brazil
2 shared publications - Carla da C. F. Curvelo
Jundiaí Agricultural School, Universidade Federal do Rio Grande do Norte, Macaíba, Brazil
1 shared publication - Eduardo Todt
Federal University of Parana
1 shared publication
Latest Publications
- Open Access
- 7 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 140719-140732
Design Challenges for an Autonomous Unmanned Aerial Vehicle With Hybrid Lift and Propulsion
Minimization of energy consumption with the longest flight time and distance is one of the main challenges in the development of unmanned aerial vehicles (UAV). Vertical take-off and landing (VTOL) is another feature that makes handling such platforms easier. Considering these requirements, we propose the architectural design of a double-hybrid UAV, conceptualized and built as a flying wing with tractor configuration with a combustion engine propeller and an electric multirotor with 3 propeller sets. We performed several tests to validate the proposed UAV model, including take-off, horizontal flight, transition tests, and also tests on autonomy (flight time and distance). As a verification of the tool usefulness, the architectural sketch of our proposal has been granted a patent from the Intellectual Property Institute (Brazil) under the number BR-10-2015-032525-8. The main contribution is the architectural design and conceptualization of the double-hybrid UAV, which consists of easy-to-follow procedural steps that can be reproduced in a simple fashion anywhere.
- 7 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 140719-140732
Open AccessDesign Challenges for an Autonomous Unmanned Aerial Vehicle With Hybrid Lift and Propulsion
Minimization of energy consumption with the longest flight time and distance is one of the main challenges in the development of unmanned aerial vehicles (UAV). Vertical take-off and landing (VTOL) is another feature that makes handling such platforms easier. Considering these requirements, we propose the architectural design of a double-hybrid UAV, conceptualized and built as a flying wing with tractor configuration with a combustion engine propeller and an electric multirotor with 3 propeller sets. We performed several tests to validate the proposed UAV model, including take-off, horizontal flight, transition tests, and also tests on autonomy (flight time and distance). As a verification of the tool usefulness, the architectural sketch of our proposal has been granted a patent from the Intellectual Property Institute (Brazil) under the number BR-10-2015-032525-8. The main contribution is the architectural design and conceptualization of the double-hybrid UAV, which consists of easy-to-follow procedural steps that can be reproduced in a simple fashion anywhere.
- Open Access
- 28 March 2024
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 110 (2) , 1-21
Nonlinearly Optimized Dual Stereo Visual Odometry Fusion
Visual odometry (VO) is an important problem studied in robotics and computer vision in which the relative camera motion is computed through visual information. In this work, we propose to reduce the error accumulation of a dual stereo VO system (4 cameras) computing 6 degrees of freedom poses by fusing two independent stereo odometry with a nonlinear optimization. Our approach computes two stereo odometries employing the LIBVISO2 algorithm and later merge them by using image correspondences between the stereo pairs and minimizing the reprojection error with graph-based bundle adjustment. Experiments carried out on the KITTI odometry datasets show that our method computes more accurate estimates (measured as the Relative Positioning Error) in comparison to the traditional stereo odometry (stereo bundle adjustment). In addition, the proposed method has a similar or better odometry accuracy compared to ORB-SLAM2 and UCOSLAM algorithms.
- 28 March 2024
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 110 (2) , 1-21
Open AccessNonlinearly Optimized Dual Stereo Visual Odometry Fusion
Visual odometry (VO) is an important problem studied in robotics and computer vision in which the relative camera motion is computed through visual information. In this work, we propose to reduce the error accumulation of a dual stereo VO system (4 cameras) computing 6 degrees of freedom poses by fusing two independent stereo odometry with a nonlinear optimization. Our approach computes two stereo odometries employing the LIBVISO2 algorithm and later merge them by using image correspondences between the stereo pairs and minimizing the reprojection error with graph-based bundle adjustment. Experiments carried out on the KITTI odometry datasets show that our method computes more accurate estimates (measured as the Relative Positioning Error) in comparison to the traditional stereo odometry (stereo bundle adjustment). In addition, the proposed method has a similar or better odometry accuracy compared to ORB-SLAM2 and UCOSLAM algorithms.
- Open Access
- 13 January 2024
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 110 (1) , 1-5
Robotics Meets AI and Vision in South America (Topical Collection)
The integration of robotics research with Artificial Intelligence (AI) and Computer Vision (CV) has enabled the solution of practical tasks previously challenging with traditional techniques. This interdisciplinary approach focuses on developing intelligent computational systems for decision-making, planning, and object recognition, minimizing human intervention in various domains like e-commerce, healthcare, industry, and more. South American researchers contribute significantly, with emphasis on emerging AI technologies such as Deep Learning, statistical methods, and computer vision applied to robotics. The works within this collection highlight the increasing prominence of robotics in education, with it becoming a part of basic education, and discuss a topical collection showcasing research presented at Latin American robotics events in 2021. The papers cover diverse topics, including altitude control for hybrid aerial-underwater vehicles, robust localization in challenging environments, cross-domain localization for underwater robots, image-based navigation for agricultural rovers, continuous training of educators in Educational Robotics, and the role of robotic simulators in education. The collection aims to disseminate cutting-edge robotics research and foster collaboration in the field.
- 13 January 2024
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 110 (1) , 1-5
Open AccessRobotics Meets AI and Vision in South America (Topical Collection)
The integration of robotics research with Artificial Intelligence (AI) and Computer Vision (CV) has enabled the solution of practical tasks previously challenging with traditional techniques. This interdisciplinary approach focuses on developing intelligent computational systems for decision-making, planning, and object recognition, minimizing human intervention in various domains like e-commerce, healthcare, industry, and more. South American researchers contribute significantly, with emphasis on emerging AI technologies such as Deep Learning, statistical methods, and computer vision applied to robotics. The works within this collection highlight the increasing prominence of robotics in education, with it becoming a part of basic education, and discuss a topical collection showcasing research presented at Latin American robotics events in 2021. The papers cover diverse topics, including altitude control for hybrid aerial-underwater vehicles, robust localization in challenging environments, cross-domain localization for underwater robots, image-based navigation for agricultural rovers, continuous training of educators in Educational Robotics, and the role of robotic simulators in education. The collection aims to disseminate cutting-edge robotics research and foster collaboration in the field.
- 18 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 300-305
Sliding Windowed Optimization Algorithm for Fusion of Redundant Stereo Visual Odometries
We propose a sliding windowed graph-optimization based approach for the fusion of two stereo visual odometries with 6 degrees of freedom poses. Stereo odometries are calculated independently, using pairs of stereo images that are captured by stereo cameras mounted on the top of a moving platform. We implemented our sliding windowed approach using the public library LIBVISO2. Our results are compared against the two recognized SLAM frameworks ORB-SLAM2 and UCOSLAM. The relative pose error of the fused poses decreases by up to 94% in relation to the error of single stereo odometry and by up to 91% compared with the results of UCOSLAM.
- 18 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 300-305
Sliding Windowed Optimization Algorithm for Fusion of Redundant Stereo Visual Odometries
We propose a sliding windowed graph-optimization based approach for the fusion of two stereo visual odometries with 6 degrees of freedom poses. Stereo odometries are calculated independently, using pairs of stereo images that are captured by stereo cameras mounted on the top of a moving platform. We implemented our sliding windowed approach using the public library LIBVISO2. Our results are compared against the two recognized SLAM frameworks ORB-SLAM2 and UCOSLAM. The relative pose error of the fused poses decreases by up to 94% in relation to the error of single stereo odometry and by up to 91% compared with the results of UCOSLAM.
- Open Access
- 22 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 32938-32953
Double Hybrid Tailsitter Unmanned Aerial Vehicle With Vertical Takeoff and Landing
We propose a new double-hybrid concept and architectural design of a tailsitter unmanned aerial vehicle with vertical takeoff and landing capability. Basically, it consists of a modified flying wing with a single combustion powertrain set and a multirotor with 2 powertrain sets with electric motors. With the electric propellers fixed at the leading wing edge, the tailsitter has two standard surfaces for elevation control and two vertical stabilizers that are used to give the necessary direction on vertical takeoff and landing. We have designed, built, and tested a prototype based on this new double-hybrid concept, which spends less energy on vertical taking off and landing and also on horizontal flight, thus maximizing flight endurance and travelled distance. We performed several experimental tests starting with the aircraft on the ground in vertical positioning. These tests include executing vertical takeoffs and landing, transitions from vertical to horizontal flight modes and transitions back (from horizontal to vertical), and hovering, which were carried out successfully. Transitions fourth and back from combustion to multirotor are inherent to some of those flight mode transitions, which have also been performed smoothly. We also performed tests (in bench) to estimate the maximum flight duration, which has demonstrated about 32 minutes of endurance. To this end, the proposed and currently built double-hybrid prototype has proven to be functional as an effective hybrid UAV system.
- 22 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 32938-32953
Open AccessDouble Hybrid Tailsitter Unmanned Aerial Vehicle With Vertical Takeoff and Landing
We propose a new double-hybrid concept and architectural design of a tailsitter unmanned aerial vehicle with vertical takeoff and landing capability. Basically, it consists of a modified flying wing with a single combustion powertrain set and a multirotor with 2 powertrain sets with electric motors. With the electric propellers fixed at the leading wing edge, the tailsitter has two standard surfaces for elevation control and two vertical stabilizers that are used to give the necessary direction on vertical takeoff and landing. We have designed, built, and tested a prototype based on this new double-hybrid concept, which spends less energy on vertical taking off and landing and also on horizontal flight, thus maximizing flight endurance and travelled distance. We performed several experimental tests starting with the aircraft on the ground in vertical positioning. These tests include executing vertical takeoffs and landing, transitions from vertical to horizontal flight modes and transitions back (from horizontal to vertical), and hovering, which were carried out successfully. Transitions fourth and back from combustion to multirotor are inherent to some of those flight mode transitions, which have also been performed smoothly. We also performed tests (in bench) to estimate the maximum flight duration, which has demonstrated about 32 minutes of endurance. To this end, the proposed and currently built double-hybrid prototype has proven to be functional as an effective hybrid UAV system.
- Open Access
Smart Artificial Markers for Accurate Visual Mapping and Localization
Artificial marker mapping is a useful tool for fast camera localization estimation with a certain degree of accuracy in large indoor and outdoor environments. Nonetheless, the level of accuracy can still be enhanced to allow the creation of applications such as the new Visual Odometry and SLAM datasets, low-cost systems for robot detection and tracking, and pose estimation. In this work, we propose to improve the accuracy of map construction using artificial markers (mapping method) and camera localization within this map (localization method) by introducing a new type of artificial marker that we call the smart marker. A smart marker consists of a square fiducial planar marker and a pose measurement system (PMS) unit. With a set of smart markers distributed throughout the environment, the proposed mapping method estimates the markers’ poses from a set of calibrated images and orientation/distance measurements gathered from the PMS unit. After this, the proposed localization method can localize a monocular camera with the correct scale, directly benefiting from the improved accuracy of the mapping method. We conducted several experiments to evaluate the accuracy of the proposed methods. The results show that our approach decreases the Relative Positioning Error (RPE) by 85% in the mapping stage and Absolute Trajectory Error (ATE) by 50% for the camera localization stage in comparison with the state-of-the-art methods present in the literature.
Open AccessSmart Artificial Markers for Accurate Visual Mapping and Localization
Artificial marker mapping is a useful tool for fast camera localization estimation with a certain degree of accuracy in large indoor and outdoor environments. Nonetheless, the level of accuracy can still be enhanced to allow the creation of applications such as the new Visual Odometry and SLAM datasets, low-cost systems for robot detection and tracking, and pose estimation. In this work, we propose to improve the accuracy of map construction using artificial markers (mapping method) and camera localization within this map (localization method) by introducing a new type of artificial marker that we call the smart marker. A smart marker consists of a square fiducial planar marker and a pose measurement system (PMS) unit. With a set of smart markers distributed throughout the environment, the proposed mapping method estimates the markers’ poses from a set of calibrated images and orientation/distance measurements gathered from the PMS unit. After this, the proposed localization method can localize a monocular camera with the correct scale, directly benefiting from the improved accuracy of the mapping method. We conducted several experiments to evaluate the accuracy of the proposed methods. The results show that our approach decreases the Relative Positioning Error (RPE) by 85% in the mapping stage and Absolute Trajectory Error (ATE) by 50% for the camera localization stage in comparison with the state-of-the-art methods present in the literature.
- Open Access
A Versatile Method for Depth Data Error Estimation in RGB-D Sensors
We propose a versatile method for estimating the RMS error of depth data provided by generic 3D sensors with the capability of generating RGB and depth (D) data of the scene, i.e., the ones based on techniques such as structured light, time of flight and stereo. A common checkerboard is used, the corners are detected and two point clouds are created, one with the real coordinates of the pattern corners and one with the corner coordinates given by the device. After a registration of these two clouds, the RMS error is computed. Then, using curve fittings methods, an equation is obtained that generalizes the RMS error as a function of the distance between the sensor and the checkerboard pattern. The depth errors estimated by our method are compared to those estimated by state-of-the-art approaches, validating its accuracy and utility. This method can be used to rapidly estimate the quality of RGB-D sensors, facilitating robotics applications as SLAM and object recognition.
Open AccessA Versatile Method for Depth Data Error Estimation in RGB-D Sensors
We propose a versatile method for estimating the RMS error of depth data provided by generic 3D sensors with the capability of generating RGB and depth (D) data of the scene, i.e., the ones based on techniques such as structured light, time of flight and stereo. A common checkerboard is used, the corners are detected and two point clouds are created, one with the real coordinates of the pattern corners and one with the corner coordinates given by the device. After a registration of these two clouds, the RMS error is computed. Then, using curve fittings methods, an equation is obtained that generalizes the RMS error as a function of the distance between the sensor and the checkerboard pattern. The depth errors estimated by our method are compared to those estimated by state-of-the-art approaches, validating its accuracy and utility. This method can be used to rapidly estimate the quality of RGB-D sensors, facilitating robotics applications as SLAM and object recognition.
- 1 December 2015
- Published by Springer Nature
- p. 16-31
Visual Odometry and Mapping for Indoor Environments Using RGB-D Cameras
- 1 December 2015
- Published by Springer Nature
- p. 16-31
Visual Odometry and Mapping for Indoor Environments Using RGB-D Cameras