Fahai Cao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fahai Cao has a total of 113 co-authors. Here are the top co-authors by number of shared publications:
Jun Xu
East China Univ Sci & Technol, Engn Res Ctr Large Scale Reactor, Shanghai 200237, Peoples R China
8 shared publicationsLingrui Cui
School of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China
8 shared publicationsMannian Ren
Sinopec Luoyang Co, Luoyang 471003, Peoples R China
5 shared publicationsCao Liu
School of Chemical Engineering, East China University of Science and Technology, Shanghai, 200237, China
4 shared publicationsJian Jiang
School of Chemical Engineering East China University of Science & Technology Shanghai 200237 China
4 shared publicationsTong Geng
Engineering Research Centre of Large Scale Reactor Engineering and Technology of ministry of Education East China University of Science and Technology Shanghai 200237 P. R. China
4 shared publications
Latest Publications
- 1 September 2026
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 16 (17) , 5624-5637
Selective enrichment of long-chain α-olefins in CO 2 hydrogenation over Fe-based catalysts via synergistic regulation of Al and Zn promoters
Dual regulation by Al and Zn enables a modified oxide–carbide environment over Fe catalysts for selective enrichment of C 10 –C 12 linear α-olefins from CO 2 hydrogenation.
- 1 September 2026
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 16 (17) , 5624-5637
Selective enrichment of long-chain α-olefins in CO 2 hydrogenation over Fe-based catalysts via synergistic regulation of Al and Zn promoters
Dual regulation by Al and Zn enables a modified oxide–carbide environment over Fe catalysts for selective enrichment of C 10 –C 12 linear α-olefins from CO 2 hydrogenation.
- 29 March 2026
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 717, 140410
Programming asphalt-derived carbon microstructures via oxygen-induced precursor restructuring for alkali-ion battery anodes
- 29 March 2026
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 717, 140410
Programming asphalt-derived carbon microstructures via oxygen-induced precursor restructuring for alkali-ion battery anodes
- 28 November 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (4) , 2450-2459
COPNA resin-derived hard carbon: enhanced low-voltage plateau behavior from three-dimensional structured precursors
COPNA, a petroleum-based precursor, was subjected to pre-oxidation and subsequent purification with the aim of controlling its cross-linking degree. This process yielded a hard carbon material with an enhanced low-voltage plateau.
- 28 November 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (4) , 2450-2459
COPNA resin-derived hard carbon: enhanced low-voltage plateau behavior from three-dimensional structured precursors
COPNA, a petroleum-based precursor, was subjected to pre-oxidation and subsequent purification with the aim of controlling its cross-linking degree. This process yielded a hard carbon material with an enhanced low-voltage plateau.
- 16 June 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (25) , 12030-12042
Carbon Fibers Prepared by Isotropic Pitch with Different Subfraction Contents during Carbonization: Implications for Enhancing Mechanical Properties
- 16 June 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (25) , 12030-12042
Carbon Fibers Prepared by Isotropic Pitch with Different Subfraction Contents during Carbonization: Implications for Enhancing Mechanical Properties
- 1 May 2025
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (11) , 3332-3345
Enhancement of CO2 hydrogenation to methanol over Cu-based catalysts mixed with hydrophobic additives
The hydrogenation of CO2 by renewable power-generated hydrogen to methanol offers a promising pathway for achieving sustainable carbon recycling. However, the CO2 hydrogenation process is restricted by the water by-product, requiring selective removal of water from the reaction system. In this study, simply physically mixing hydrophobic poly(divinylbenzene) with the Cu/Zn/Zr catalyst can rapidly remove water generated in the reaction system without altering the basic structure of the catalyst. By optimizing operation conditions, the CO2 conversion of the catalyst can reach 23.45%, and the space–time yield of methanol can reach 245.4 mgMeOH gcat −1 h−1 under the conditions of 260 °C, 5 MPa, H2/CO2 = 3, GHSV of 6000 mL gcat −1 h−1, and mass ratio of 3. Mechanistic investigation indicates that the poly(divinylbenzene) additive can accelerate the rapid diffusion of water from the catalyst surface through its hydrophobic water-conducting channels, thereby inhibiting the oxidation of copper active sites on the catalyst surface by water, which helps maintain high catalyst activity during CO2 hydrogenation and ensures the smooth progression of the formate reaction pathway. Furthermore, molecular dynamics simulations demonstrate that water can continuously be removed from hydrophobic water-conducting channels. Such a physically mixed catalyst remains durable in the continuous test for 200 hours owing to the thermal stability of the poly(divinylbenzene) additive. By selecting more suitable hydrophobic additives, such as hydrophobic graphite, this strategy can be further extended to other CO2 hydrogenation reactions.
- 1 May 2025
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (11) , 3332-3345
Enhancement of CO2 hydrogenation to methanol over Cu-based catalysts mixed with hydrophobic additives
The hydrogenation of CO2 by renewable power-generated hydrogen to methanol offers a promising pathway for achieving sustainable carbon recycling. However, the CO2 hydrogenation process is restricted by the water by-product, requiring selective removal of water from the reaction system. In this study, simply physically mixing hydrophobic poly(divinylbenzene) with the Cu/Zn/Zr catalyst can rapidly remove water generated in the reaction system without altering the basic structure of the catalyst. By optimizing operation conditions, the CO2 conversion of the catalyst can reach 23.45%, and the space–time yield of methanol can reach 245.4 mgMeOH gcat −1 h−1 under the conditions of 260 °C, 5 MPa, H2/CO2 = 3, GHSV of 6000 mL gcat −1 h−1, and mass ratio of 3. Mechanistic investigation indicates that the poly(divinylbenzene) additive can accelerate the rapid diffusion of water from the catalyst surface through its hydrophobic water-conducting channels, thereby inhibiting the oxidation of copper active sites on the catalyst surface by water, which helps maintain high catalyst activity during CO2 hydrogenation and ensures the smooth progression of the formate reaction pathway. Furthermore, molecular dynamics simulations demonstrate that water can continuously be removed from hydrophobic water-conducting channels. Such a physically mixed catalyst remains durable in the continuous test for 200 hours owing to the thermal stability of the poly(divinylbenzene) additive. By selecting more suitable hydrophobic additives, such as hydrophobic graphite, this strategy can be further extended to other CO2 hydrogenation reactions.
- 20 October 2023
- Published by Wiley in Chemistry – A European Journal
- Vol. 29 (67) , e202301954
The Calculation of Both Electrostatic and Van der Waals Effects to Probe the Efficiency of Solvent Extraction of Heterocyclic Aromatics from Heavy Oil
Due to the complex composition and similar structure, the extraction denitrification of aromatic rich oil is faced with the contradiction problem of denitrification efficiency and aromatic loss which cannot be efficiently solved by experiments. However, the complex interactions involved can be analyzed from the perspective of calculation, and the prediction criteria and methods are proposed. Based on rigorous density functional theory calculation data, Simple models based on electrostatic potential (ESP) and Van der Waals potential (VdWP)‐based calculations were established and validated. The twofold model provided the best prediction for interactions between extractants and nitrogen compounds and between extractants and aromatics, which determines denitrification efficiency and aromatic loss, respectively, due to the most complete description of both electrostatic and VdW force. This provides a powerful tool for evaluating the non‐covalent interactions and thence tuning the efficiency of the separation process. Thus, high denitrification efficiency (43.2~66.3 %) and moderate aromatic loss (1.7~4.4 %) were obtained using screened deep eutectic solvents (DESs). This ideal observation provided the potential for mild hydrodesulfurization and manufacture of high‐grade carbon materials.
- 20 October 2023
- Published by Wiley in Chemistry – A European Journal
- Vol. 29 (67) , e202301954
The Calculation of Both Electrostatic and Van der Waals Effects to Probe the Efficiency of Solvent Extraction of Heterocyclic Aromatics from Heavy Oil
Due to the complex composition and similar structure, the extraction denitrification of aromatic rich oil is faced with the contradiction problem of denitrification efficiency and aromatic loss which cannot be efficiently solved by experiments. However, the complex interactions involved can be analyzed from the perspective of calculation, and the prediction criteria and methods are proposed. Based on rigorous density functional theory calculation data, Simple models based on electrostatic potential (ESP) and Van der Waals potential (VdWP)‐based calculations were established and validated. The twofold model provided the best prediction for interactions between extractants and nitrogen compounds and between extractants and aromatics, which determines denitrification efficiency and aromatic loss, respectively, due to the most complete description of both electrostatic and VdW force. This provides a powerful tool for evaluating the non‐covalent interactions and thence tuning the efficiency of the separation process. Thus, high denitrification efficiency (43.2~66.3 %) and moderate aromatic loss (1.7~4.4 %) were obtained using screened deep eutectic solvents (DESs). This ideal observation provided the potential for mild hydrodesulfurization and manufacture of high‐grade carbon materials.
- 2 August 2023
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 37 (16) , 12123-12135
Intelligent Molecular Identification Approach to High-Efficiency Solvents for Organosulfide Capture Using the Active Machine Learning Framework
- 2 August 2023
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 37 (16) , 12123-12135
Intelligent Molecular Identification Approach to High-Efficiency Solvents for Organosulfide Capture Using the Active Machine Learning Framework
- Open Access
- 11 October 2022
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 10, 1037997
A review of catalytic hydrogenation of carbon dioxide: From waste to hydrocarbons
With the rapid development of industrial society and humankind’s prosperity, the growing demands of global energy, mainly based on the combustion of hydrocarbon fossil fuels, has become one of the most severe challenges all over the world. It is estimated that fossil fuel consumption continues to grow with an annual increase rate of 1.3%, which has seriously affected the natural environment through the emission of greenhouse gases, most notably carbon dioxide (CO2). Given these recognized environmental concerns, it is imperative to develop clean technologies for converting captured CO2 to high-valued chemicals, one of which is value-added hydrocarbons. In this article, environmental effects due to CO2 emission are discussed and various routes for CO2 hydrogenation to hydrocarbons including light olefins, fuel oils (gasoline and jet fuel), and aromatics are comprehensively elaborated. Our emphasis is on catalyst development. In addition, we present an outlook that summarizes the research challenges and opportunities associated with the hydrogenation of CO2 to hydrocarbon products.
- 11 October 2022
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 10, 1037997
Open AccessA review of catalytic hydrogenation of carbon dioxide: From waste to hydrocarbons
With the rapid development of industrial society and humankind’s prosperity, the growing demands of global energy, mainly based on the combustion of hydrocarbon fossil fuels, has become one of the most severe challenges all over the world. It is estimated that fossil fuel consumption continues to grow with an annual increase rate of 1.3%, which has seriously affected the natural environment through the emission of greenhouse gases, most notably carbon dioxide (CO2). Given these recognized environmental concerns, it is imperative to develop clean technologies for converting captured CO2 to high-valued chemicals, one of which is value-added hydrocarbons. In this article, environmental effects due to CO2 emission are discussed and various routes for CO2 hydrogenation to hydrocarbons including light olefins, fuel oils (gasoline and jet fuel), and aromatics are comprehensively elaborated. Our emphasis is on catalyst development. In addition, we present an outlook that summarizes the research challenges and opportunities associated with the hydrogenation of CO2 to hydrocarbon products.
- 1 July 2022
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 44 (3) , 5755-5765
Investigation on aquathermolysis desulfurization by cutting off C-S bond in thiophene over Fe-Zr-Al catalyst facilitated by surfactants
This study aimed to apply aquathermolysis technology to remove thiophene sulfur in vacuum residue to obtain qualified petroleum coke products based on a well-designed Fe-Zr-Al catalyst. A coprecipitation method was first developed to synthesize Fe-Zr-Al composite metal oxide catalyst. The thiophene model oil was selected as the reaction system to investigate the process conditions. By adding surfactants into the reaction system to strengthen the mass transfer process of oil–water two-phase, the desulfurization rate of aquathermolysis was improved. It was shown in this study that under the conditions of oil–water ratio of 3:7, temperature of 280°C, pressure of 4 MPa and reaction duration of 60 h, the desulfurization rate could reach 44.39%. The further introduction of 2.4% Sorbitan oleate into the above reaction system could significantly enhance the desulfurization rate to 60.20%. Under the action of Fe2O3 lattice oxygen, thiophene was oxidized and C-S bond was broken, so as to achieve the purpose of desulfurization. The decomposition of water generated active oxygen to continuously replenish lattice oxygen of Fe2O3. The current founding can provide a new way for the effective desulfurization of vacuum residue to produce qualified petroleum coke products.
- 1 July 2022
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 44 (3) , 5755-5765
Investigation on aquathermolysis desulfurization by cutting off C-S bond in thiophene over Fe-Zr-Al catalyst facilitated by surfactants
This study aimed to apply aquathermolysis technology to remove thiophene sulfur in vacuum residue to obtain qualified petroleum coke products based on a well-designed Fe-Zr-Al catalyst. A coprecipitation method was first developed to synthesize Fe-Zr-Al composite metal oxide catalyst. The thiophene model oil was selected as the reaction system to investigate the process conditions. By adding surfactants into the reaction system to strengthen the mass transfer process of oil–water two-phase, the desulfurization rate of aquathermolysis was improved. It was shown in this study that under the conditions of oil–water ratio of 3:7, temperature of 280°C, pressure of 4 MPa and reaction duration of 60 h, the desulfurization rate could reach 44.39%. The further introduction of 2.4% Sorbitan oleate into the above reaction system could significantly enhance the desulfurization rate to 60.20%. Under the action of Fe2O3 lattice oxygen, thiophene was oxidized and C-S bond was broken, so as to achieve the purpose of desulfurization. The decomposition of water generated active oxygen to continuously replenish lattice oxygen of Fe2O3. The current founding can provide a new way for the effective desulfurization of vacuum residue to produce qualified petroleum coke products.