Xiaobo Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaobo Sun has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Friedrich Matthias Bickelhaupt
Department of Chemistry and Pharmaceutical Sciences, AIMMS, Vrije Universiteit Amsterdam, De Boelelaan 1108, Amsterdam, 1081 HZ, The Netherlands
11 shared publications - Jordi Poater
Departament de Química Inorgànica i Orgànica & IQTCUB, Universitat de Barcelona, 08028 Barcelona, Spain
10 shared publications - Trevor A. Hamlin
Department of Chemistry and Pharmaceutical Sciences, Amsterdam Institute of Molecular and Life Sciences (AIMMS), Vrije Universiteit Amsterdam, Amsterdam, The Netherlands
10 shared publications - Eva Blokker
Department of Theoretical Chemistry Amsterdam Institute of Molecular and Life Sciences (AIMMS) Vrije Universiteit Amsterdam De Boelelaan 1083 1081 HV Amsterdam (The Netherlands
4 shared publications - J. Martijn van der Schuur
Polymer Specialties, Nouryon Zutphenseweg 10 7418 AJ Deventer The Netherlands
4 shared publications - Thomas Hansen
Department of Chemistry and Pharmaceutical Sciences, Amsterdam Institute of Molecular and Life Sciences (AIMMS), Vrije Universiteit Amsterdam, De Boelelaan 1108, 1081 HZ Amsterdam, The Netherlands
3 shared publications
Latest Publications
- Open Access
- 30 September 2026
- Published by Wiley in Journal of Computational Chemistry
- Vol. 47 (26) , e70512
PyOrbb —Automated Analyses of Orbital‐Interaction Mechanisms
We present PyOrbb, an open‐source, user‐friendly Python‐based program that automates the analysis and visualization of orbital interaction mechanisms between molecular fragments or reactants, based on quantum‐chemical computations with the Amsterdam Density Functional (ADF) program. PyOrbb extracts the essential mixing patterns, presents them in an interactively adjustable orbital interaction diagram, and summarizes all relevant quantitative data in a convenient Excel spreadsheet for further analysis. The tool enables efficient interpretation of chemical bonding across a broad range of systems, including examples from organic, inorganic, and supramolecular chemistry. The application runs on macOS and Windows operating systems. PyOrbb is shown to accurately and rapidly visualize relevant bonding mechanisms from the often‐overwhelming output of density functional computations.
- 30 September 2026
- Published by Wiley in Journal of Computational Chemistry
- Vol. 47 (26) , e70512
Open AccessPyOrbb —Automated Analyses of Orbital‐Interaction Mechanisms
We present PyOrbb, an open‐source, user‐friendly Python‐based program that automates the analysis and visualization of orbital interaction mechanisms between molecular fragments or reactants, based on quantum‐chemical computations with the Amsterdam Density Functional (ADF) program. PyOrbb extracts the essential mixing patterns, presents them in an interactively adjustable orbital interaction diagram, and summarizes all relevant quantitative data in a convenient Excel spreadsheet for further analysis. The tool enables efficient interpretation of chemical bonding across a broad range of systems, including examples from organic, inorganic, and supramolecular chemistry. The application runs on macOS and Windows operating systems. PyOrbb is shown to accurately and rapidly visualize relevant bonding mechanisms from the often‐overwhelming output of density functional computations.
- 8 April 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (3)
Selective lithium extraction from low-grade lepidolite leachate with a high Na/Li ratio using Lix54-TBP
- 8 April 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (3)
Selective lithium extraction from low-grade lepidolite leachate with a high Na/Li ratio using Lix54-TBP
- Open Access
- 1 August 2022
- Published by Wiley in Angewandte Chemie
- Vol. 134 (36)
Methyl Substitution Destabilizes Alkyl Radicals
We have quantum chemically investigated how methyl substituents affect the stability of alkyl radicals MemH3−mC⋅ and the corresponding MemH3−mC−X bonds (X = H, CH3, OH; m = 0 – 3) using density functional theory at M06‐2X/TZ2P. The state‐of‐the‐art in physical organic chemistry is that alkyl radicals are stabilized upon an increase in their degree of substitution from methylmH3−mC⋅ radical isdestabilizedwith increasing substitution. The reason that the corresponding C−H bond nevertheless becomes weaker is that substitution destabilizes the sterically more congested MemH3−mC−H molecule even more.
- 1 August 2022
- Published by Wiley in Angewandte Chemie
- Vol. 134 (36)
Open AccessMethyl Substitution Destabilizes Alkyl Radicals
We have quantum chemically investigated how methyl substituents affect the stability of alkyl radicals MemH3−mC⋅ and the corresponding MemH3−mC−X bonds (X = H, CH3, OH; m = 0 – 3) using density functional theory at M06‐2X/TZ2P. The state‐of‐the‐art in physical organic chemistry is that alkyl radicals are stabilized upon an increase in their degree of substitution from methylmH3−mC⋅ radical isdestabilizedwith increasing substitution. The reason that the corresponding C−H bond nevertheless becomes weaker is that substitution destabilizes the sterically more congested MemH3−mC−H molecule even more.
- Open Access
- 1 August 2022
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (36) , e202207477
Methyl Substitution Destabilizes Alkyl Radicals
We have quantum chemically investigated how methyl substituents affect the stability of alkyl radicals MemH3−mC⋅ and the corresponding MemH3−mC−X bonds (X = H, CH3, OH; m = 0 – 3) using density functional theory at M06‐2X/TZ2P. The state‐of‐the‐art in physical organic chemistry is that alkyl radicals are stabilized upon an increase in their degree of substitution from methylmH3−mC⋅ radical isdestabilizedwith increasing substitution. The reason that the corresponding C−H bond nevertheless becomes weaker is that substitution destabilizes the sterically more congested MemH3−mC−H molecule even more.
- 1 August 2022
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (36) , e202207477
Open AccessMethyl Substitution Destabilizes Alkyl Radicals
We have quantum chemically investigated how methyl substituents affect the stability of alkyl radicals MemH3−mC⋅ and the corresponding MemH3−mC−X bonds (X = H, CH3, OH; m = 0 – 3) using density functional theory at M06‐2X/TZ2P. The state‐of‐the‐art in physical organic chemistry is that alkyl radicals are stabilized upon an increase in their degree of substitution from methylmH3−mC⋅ radical isdestabilizedwith increasing substitution. The reason that the corresponding C−H bond nevertheless becomes weaker is that substitution destabilizes the sterically more congested MemH3−mC−H molecule even more.
- Open Access
- 16 June 2022
- Published by Wiley in Chemistry – A European Journal
- Vol. 28 (44) , e202201093
C−X Bond Activation by Palladium: Steric Shielding versus Steric Attraction
The C−X bond activation (X = H, C) of a series of substituted C(n°)−H and C(n°)−C(m°) bonds with C(n°) and C(m°) = H3C− (methyl, 0°), CH3H2C− (primary, 1°), (CH3)2HC− (secondary, 2°), (CH3)3C− (tertiary, 3°) by palladium were investigated using relativistic dispersion‐corrected density functional theory at ZORA‐BLYP‐D3(BJ)/TZ2P. The effect of the stepwise introduction of substituents was pinpointed at the C−X bond on the bond activation process. The C(n°)−X bonds become substantially weaker going from C(0°)−X, to C(1°)−X, to C(2°)−X, to C(3°)−X because of the increasing steric repulsion between the C(n°)‐ and X‐group. Interestingly, this often does not lead to a lower barrier for the C(n°)−X bond activation. The C−H activation barrier, for example, decreases from C(0°)−X, to C(1°)−X, to C(2°)−X and then increases again for the very crowded C(3°)−X bond. For the more congested C−C bond, in contrast, the activation barrier always increases as the degree of substitution is increased. Our activation strain and matching energy decomposition analyses reveal that these differences in C−H and C−C bond activation can be traced back to the opposing interplay between steric repulsion across the C−X bond versus that between the catalyst and substrate.
- 16 June 2022
- Published by Wiley in Chemistry – A European Journal
- Vol. 28 (44) , e202201093
Open AccessC−X Bond Activation by Palladium: Steric Shielding versus Steric Attraction
The C−X bond activation (X = H, C) of a series of substituted C(n°)−H and C(n°)−C(m°) bonds with C(n°) and C(m°) = H3C− (methyl, 0°), CH3H2C− (primary, 1°), (CH3)2HC− (secondary, 2°), (CH3)3C− (tertiary, 3°) by palladium were investigated using relativistic dispersion‐corrected density functional theory at ZORA‐BLYP‐D3(BJ)/TZ2P. The effect of the stepwise introduction of substituents was pinpointed at the C−X bond on the bond activation process. The C(n°)−X bonds become substantially weaker going from C(0°)−X, to C(1°)−X, to C(2°)−X, to C(3°)−X because of the increasing steric repulsion between the C(n°)‐ and X‐group. Interestingly, this often does not lead to a lower barrier for the C(n°)−X bond activation. The C−H activation barrier, for example, decreases from C(0°)−X, to C(1°)−X, to C(2°)−X and then increases again for the very crowded C(3°)−X bond. For the more congested C−C bond, in contrast, the activation barrier always increases as the degree of substitution is increased. Our activation strain and matching energy decomposition analyses reveal that these differences in C−H and C−C bond activation can be traced back to the opposing interplay between steric repulsion across the C−X bond versus that between the catalyst and substrate.
- Open Access
- 5 February 2022
- Published by Wiley in Journal of Computational Chemistry
- Vol. 44 (4) , 495-505
Rational design of iron catalysts for C–X bond activation
We have quantum chemically studied the iron‐mediated CX bond activation (X = H, Cl, CH3) by d8‐FeL4 complexes using relativistic density functional theory at ZORA‐OPBE/TZ2P. We find that by either modulating the electronic effects of a generic iron‐catalyst by a set of ligands, that is, CO, BF, PH3, BN(CH3)2, or by manipulating structural effects through the introduction of bidentate ligands, that is, PH2(CH2)nPH2 with n = 6–1, one can significantly decrease the reaction barrier for the CX bond activation. The combination of both tuning handles causes a decrease of the CH activation barrier from 10.4 to 4.6 kcal mol−1. Our activation strain and Kohn‐Sham molecular orbital analyses reveal that the electronic tuning works via optimizing the catalyst–substrate interaction by introducing a strong second backdonation interaction (i.e., “ligand‐assisted” interaction), while the mechanism for structural tuning is mainly caused by the reduction of the required activation strain because of the pre‐distortion of the catalyst. In all, we present design principles for iron‐based catalysts that mimic the favorable behavior of their well‐known palladium analogs in the bond‐activation step of cross‐coupling reactions.
- 5 February 2022
- Published by Wiley in Journal of Computational Chemistry
- Vol. 44 (4) , 495-505
Open AccessRational design of iron catalysts for C–X bond activation
We have quantum chemically studied the iron‐mediated CX bond activation (X = H, Cl, CH3) by d8‐FeL4 complexes using relativistic density functional theory at ZORA‐OPBE/TZ2P. We find that by either modulating the electronic effects of a generic iron‐catalyst by a set of ligands, that is, CO, BF, PH3, BN(CH3)2, or by manipulating structural effects through the introduction of bidentate ligands, that is, PH2(CH2)nPH2 with n = 6–1, one can significantly decrease the reaction barrier for the CX bond activation. The combination of both tuning handles causes a decrease of the CH activation barrier from 10.4 to 4.6 kcal mol−1. Our activation strain and Kohn‐Sham molecular orbital analyses reveal that the electronic tuning works via optimizing the catalyst–substrate interaction by introducing a strong second backdonation interaction (i.e., “ligand‐assisted” interaction), while the mechanism for structural tuning is mainly caused by the reduction of the required activation strain because of the pre‐distortion of the catalyst. In all, we present design principles for iron‐based catalysts that mimic the favorable behavior of their well‐known palladium analogs in the bond‐activation step of cross‐coupling reactions.
- Open Access
- 31 January 2022
- Published by Wiley in Chemistry – A European Journal
- Vol. 28 (26) , e202103953
C(spn)−X (n=1–3) Bond Activation by Palladium
We have studied the palladium‐mediated activation of C(spn)−X bonds (n = 1–3 and X = H, CH3, Cl) in archetypal model substrates H3C−CH2−X, H2C=CH−X and HC≡C−X by catalysts PdLn with Ln = no ligand, Cl−, and (PH3)2, using relativistic density functional theory at ZORA‐BLYP/TZ2P. The oxidative addition barrier decreases along this series, even though the strength of the bonds increases going from C(sp3)−X, to C(sp2)−X, to C(sp)−X. Activation strain and matching energy decomposition analyses reveal that the decreased oxidative addition barrier going from sp3, to sp2, to sp, originates from a reduction in the destabilizing steric (Pauli) repulsion between catalyst and substrate. This is the direct consequence of the decreasing coordination number of the carbon atom in C(spn)−X, which goes from four, to three, to two along this series. The associated net stabilization of the catalyst–substrate interaction dominates the trend in strain energy which indeed becomes more destabilizing along this same series as the bond becomes stronger from C(sp3)−X to C(sp)−X.
- 31 January 2022
- Published by Wiley in Chemistry – A European Journal
- Vol. 28 (26) , e202103953
Open AccessC(spn)−X (n=1–3) Bond Activation by Palladium
We have studied the palladium‐mediated activation of C(spn)−X bonds (n = 1–3 and X = H, CH3, Cl) in archetypal model substrates H3C−CH2−X, H2C=CH−X and HC≡C−X by catalysts PdLn with Ln = no ligand, Cl−, and (PH3)2, using relativistic density functional theory at ZORA‐BLYP/TZ2P. The oxidative addition barrier decreases along this series, even though the strength of the bonds increases going from C(sp3)−X, to C(sp2)−X, to C(sp)−X. Activation strain and matching energy decomposition analyses reveal that the decreased oxidative addition barrier going from sp3, to sp2, to sp, originates from a reduction in the destabilizing steric (Pauli) repulsion between catalyst and substrate. This is the direct consequence of the decreasing coordination number of the carbon atom in C(spn)−X, which goes from four, to three, to two along this series. The associated net stabilization of the catalyst–substrate interaction dominates the trend in strain energy which indeed becomes more destabilizing along this same series as the bond becomes stronger from C(sp3)−X to C(sp)−X.
- Open Access
- 5 November 2021
- Published by Wiley in Chemistry – A European Journal
- Vol. 27 (63) , 15561
Cover Feature: The Chemical Bond: When Atom Size Instead of Electronegativity Difference Determines Trend in Bond Strength (Chem. Eur. J. 63/2021)
- 5 November 2021
- Published by Wiley in Chemistry – A European Journal
- Vol. 27 (63) , 15561
Open AccessCover Feature: The Chemical Bond: When Atom Size Instead of Electronegativity Difference Determines Trend in Bond Strength (Chem. Eur. J. 63/2021)
- Open Access
- 5 October 2021
- Published by Wiley in Chemistry – A European Journal
- Vol. 27 (63) , 15616-15622
The Chemical Bond: When Atom Size Instead of Electronegativity Difference Determines Trend in Bond Strength
We have quantum chemically analyzed element−element bonds of archetypal HnX−YHn molecules (X, Y=C, N, O, F, Si, P, S, Cl, Br, I), using density functional theory. One purpose is to obtain a set of consistent homolytic bond dissociation energies (BDE) for establishing accurate trends across the periodic table. The main objective is to elucidate the underlying physical factors behind these chemical bonding trends. On one hand, we confirm that, along a period (e. g., from C−C to C−F), bonds strengthen because the electronegativity difference across the bond increases. But, down a period, our findings constitute a paradigm shift. From C−F to C−I, for example, bonds do become weaker, however, not because of the decreasing electronegativity difference. Instead, we show that the effective atom size (via steric Pauli repulsion) is the causal factor behind bond weakening in this series, and behind the weakening in orbital interactions at the equilibrium distance. We discuss the actual bonding mechanism and the importance of analyzing this mechanism as a function of the bond distance.
- 5 October 2021
- Published by Wiley in Chemistry – A European Journal
- Vol. 27 (63) , 15616-15622
Open AccessThe Chemical Bond: When Atom Size Instead of Electronegativity Difference Determines Trend in Bond Strength
We have quantum chemically analyzed element−element bonds of archetypal HnX−YHn molecules (X, Y=C, N, O, F, Si, P, S, Cl, Br, I), using density functional theory. One purpose is to obtain a set of consistent homolytic bond dissociation energies (BDE) for establishing accurate trends across the periodic table. The main objective is to elucidate the underlying physical factors behind these chemical bonding trends. On one hand, we confirm that, along a period (e. g., from C−C to C−F), bonds strengthen because the electronegativity difference across the bond increases. But, down a period, our findings constitute a paradigm shift. From C−F to C−I, for example, bonds do become weaker, however, not because of the decreasing electronegativity difference. Instead, we show that the effective atom size (via steric Pauli repulsion) is the causal factor behind bond weakening in this series, and behind the weakening in orbital interactions at the equilibrium distance. We discuss the actual bonding mechanism and the importance of analyzing this mechanism as a function of the bond distance.
- Open Access
- 4 June 2019
- Published by Wiley in Journal of Computational Chemistry
- Vol. 40 (25) , 2227-2233
PyFrag 2019—Automating the exploration and analysis of reaction mechanisms
We present a substantial update to the PyFrag 2008 program, which was originally designed to perform a fragment‐based activation strain analysis along a provided potential energy surface. The original PyFrag 2008 workflow facilitated the characterization of reaction mechanisms in terms of the intrinsic properties, such as strain and interaction, of the reactants. The new PyFrag 2019 program has automated and reduced the time‐consuming and laborious task of setting up, running, analyzing, and visualizing computational data from reaction mechanism studies to a single job. PyFrag 2019 resolves three main challenges associated with the automated computational exploration of reaction mechanisms: it (1) computes the reaction path by carrying out multiple parallel calculations using initial coordinates provided by the user; (2) monitors the entire workflow process; and (3) tabulates and visualizes the final data in a clear way. The activation strain and canonical energy decomposition results that are generated relate the characteristics of the reaction profile in terms of intrinsic properties (strain, interaction, orbital overlaps, orbital energies, populations) of the reactant species. © 2019 The Authors. Journal of Computational Chemistry published by Wiley Periodicals, Inc.
- 4 June 2019
- Published by Wiley in Journal of Computational Chemistry
- Vol. 40 (25) , 2227-2233
Open AccessPyFrag 2019—Automating the exploration and analysis of reaction mechanisms
We present a substantial update to the PyFrag 2008 program, which was originally designed to perform a fragment‐based activation strain analysis along a provided potential energy surface. The original PyFrag 2008 workflow facilitated the characterization of reaction mechanisms in terms of the intrinsic properties, such as strain and interaction, of the reactants. The new PyFrag 2019 program has automated and reduced the time‐consuming and laborious task of setting up, running, analyzing, and visualizing computational data from reaction mechanism studies to a single job. PyFrag 2019 resolves three main challenges associated with the automated computational exploration of reaction mechanisms: it (1) computes the reaction path by carrying out multiple parallel calculations using initial coordinates provided by the user; (2) monitors the entire workflow process; and (3) tabulates and visualizes the final data in a clear way. The activation strain and canonical energy decomposition results that are generated relate the characteristics of the reaction profile in terms of intrinsic properties (strain, interaction, orbital overlaps, orbital energies, populations) of the reactant species. © 2019 The Authors. Journal of Computational Chemistry published by Wiley Periodicals, Inc.