NTNarit Triamnak

Narit Triamnak

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Narit Triamnak has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Fast Preparation of White Luminescent Borosilicate Glass via Microwave Heating Technique

    by Narit Triamnak

    T he aim of this work was to study the preparation of luminescent glass samples using microwave technique. Borosilicate glass powder and dysprosium oxide (Dy2O3) as the luminescent phosphor were mixed with the concentration ranging between 0.0-0.5 mol%. The glass pellets were successfully prepared via microwave heating with a power of 800 watts for 24 minutes. The samples exhibited dispersion of pores within the glass matrix which could be the origin of white translucent characteristics. The XRD results showed an amorphous structure which revealed the completely dissolution of Dy2O3 within the samples. The luminescence properties of the samples were tested via photoluminescence spectrometer, revealing that the glass doped with dysprosium emitted white light with the maximum emission occurring at a wavelength of 576 nm. The CIE chromacity characteristics confirmed the white emission of the glass samples. In addition, it was found that the decay time of the luminescent glass decreased with an increase in the concentration of the luminescent phosphor. This may be caused by the energy transfer of electrons through cross relaxation.

  • Comparative Properties Investigations of Organic Doped Hybrid-Perovskite Solar Cells

    by Natthapong Wongdamnern, Sakchai Laksee, Thanapong Sareein, Cheewita Suwanchawalit, Nutchapon Chotigkrai, Supakij Suttiruengwong, Narit Triamnak

  • Open Access

    Facile synthesis of Nb-Al oxides for Levulinic acid production from glucose

    by Wasu Chaitree, Poramathe Jarunothai, Charurat Likitthawisin, Narit Triamnak, Nardrapee Karuna, Nutchapon Chotigkrai

    Valued-added levulinic acid can be synthesized from glucose as an abundance feedstock. Solid acid catalysts have been applied for this task due to the high catalytic activity with ease of separation. In this work, Al2O3 support was synthesized using solution combustion method and xNb/Al2O3 catalysts (x=1, 5, and 10 wt% of Nb2O5) were prepared by incipient wetness impregnation. The catalysts were characterized by XRD, N2 adsorption, SEM, and NH3-TPD. The XRD results indicated that a mixture of γ- and α-Al2O3 was obtained from solution combustion. The specific surface area of Al2O3 support was 159 and it decreased to 103, 98, and 79 m2/g with increasing Nb2O5 to 1, 5, and 10 wt%, respectively. Moreover, the NH3−TPD results demonstrated that amount of acid sites also declined from 1.01 to 0.85, 0.53, and 0.44 mmol NH3/g as Nb2O5 contents increased. While one-pot derived 10 wt% Nb2O5−Al2O3 resulted in γ-Al2O3 as majority with surface area of 159 m2/g and acidity of 0.89 mmol NH3/g. This suggested that incorporation of Nb2O5 in Al2O3 retarded the phase transformation at high temperature. For a series of Nb-impregnated Al2O3, levulinic acid yields were 6.6, 6.5, and 5.5 mol% for 1, 5, and 10 wt% Nb2O5/Al2O3, respectively. Interestingly, one-pot derived 10 wt% Nb2O5-Al2O3 produced the highest levulinic acid yield of 18.9 mol%. This study shows the advantage of solution combustion for synthesizing metal-oxide acid catalysts to convert biomass-based feedstock to value-added products.

  • Open Access

    Fabrication and Characterization of Ag–Ta Thin Films by Co-Magnetron Sputtering as Alternative Layer for High Reflection of NIR Radiation

    by Wuttichai Phae-Ngam, Tanattha Rattana, Surachart Kamoldilok, Kanokporn Kohmun, Hideki Nakajima, Narit Triamnak, Chanunthorn Chananonnawathorn, Wantanee Hincheeranan, Mati Horprathum

    Silver–tantalum (Ag–Ta) thin films were fabricated by magnetron co-sputtering on silicon (Si) wafer (100) and glass slide substrates at room temperature. The Ag–Ta thin films were prepared at various deposition times of 5, 10, 20 and 30 s and the physical, structural and optical properties of the Ag–Ta thin films were investigated. It was determined that the thicknesses of the films were 7, 9, 17 and 33 nm, respectively. The results revealed that an increase in the film thickness leads to a monotonic increase in FCC and BCC phase of Ag and Ta, respectively. The work function and stoichiometric of the Ag–Ta thin films were investigated by ultraviolet and X-ray photoemission spectroscopies (UPS and XPS), respectively. The potential of Ag–Ta thin films to be used as low-emission coating was investigated using a spectrophotometer. A UV–VIS–NIR spectrophotometer was used to measure the spectral reflectance in the wavelength range from 300 to 2000 nm. The results showed that the Ag–Ta thin film deposited for 30 s exhibited higher reflectance in NIR region than those of 5, 10, 20 and 30 s. It demonstrated an average reflectance of about 80% and slightly decreased to 75% after being kept in the air atmosphere for 28 days. It can be likewise proposed as an alternative thin film with high reflectance of NIR radiation single layer to develop industrial low-emission coating for cost-effective, clean, and easy adaptation to a large area coating.


  • Dielectric and ferroelectric properties of modified-BaTiO3 lead-free ceramics prepared by solid solution method

    by Anurak Prasatkhetragarn, Thanapong Sareein, Narit Triamnak, Rattikorn Yimnirun

    Barium titanate (BaTiO3) has been recognized as an important perovskite ceramic since its discovery due to its excellent dielectric, ferroelectric and piezoelectric properties. Its modifications have been studied in many perspectives depending on applications. In this review, the basic principles of BaTiO3 were described, then followed by the explanation on the recent modifications of BaTiO3 to improve the dielectric properties. Relaxor ferroelectric behavior of BaTiO3 was revealed by combining BaTiO3 with other Bi-based perovskites. These modified- BaTiO3 opened the opportunities for emerging energy storage applications. Next, the modifications for ferroelectric and ferromagnetic aspects were further discussed. BaTiO3 can also be doped by other ions to enhance such properties. Solid solution between Bi-based perovskites such as BiFeO3, (Bi0.5K0.5)TiO3, or Bi(Zn0.5Ti0.5)O3 and BaTiO3 can also improve ferroelectric and ferromagnetic properties. Therefore, these details of recent BaTiO3 modifications may provide guidance for the next BaTiO3 investigations in order to gain the maximum benefits from BaTiO3.


  • Lowering Synthesis Temperature of BaTiO3-Bi(Zn0.5Zr0.5)O3Ceramics by Salt Flux Assistance and Dielectric Properties Investigations

    by Narit Triamnak, Natthapong Wongdamnern, Thanapong Sareein, Athipong Ngamjarurojana, Rattikorn Yimnirun

    Phase formations and dielectric properties of lead free barium titanate bismuth zinc zirconate, BaTiO3-Bi(Zn0.5Zr0.5)O3 (BT-BZZ), were comparatively investigated between two different synthesis routes, solid state reaction and salt flux assistance methods. The perovskite (1-x)BT-(x)BZZ ceramics, where x = 0.02, 0.05 and 0.10, were synthesized by using reagent grade oxides and the NaCl salt was used as a surface active agent to lower the calcination temperature. Phase formations were examined by X-ray diffraction technique (XRD). It was found that the solid solutions of (1-x)BT-(x)BZZ can be obtained with lower temperature at least 200 °C via salt flux assistance method. The NaCl salt addition could result in single phase of perovskite structure at every compositions with the calcination temperature as low as 800 °C. Dielectric measurements revealed that the Curie temperature (Tc) shifted to lower temperature with increase of BZZ concentration. Moreover, the dielectric behavior transformed to diffuse phase transition when x = 0.1. The samples prepared via salt flux assistance method exhibited smaller grain size which were revealed by scanning electron microscope. In addition, P-E hysteresis measurements illustrated the higher high E-field dielectric constant with the narrower P-E loop when the salt flux was applied.

  • Open Access

    Synthesis and Characterizations of (CoxMg(2−x))SiO4 Forsterite Ceramic Pigments from Mirror Waste

    by Niti Yongvanich, Kullada Supanichwatin, Jitat Penglan, Narit Triamnak

    Ceramic pigments have been widely used in a variety of industries because of their excellent properties, such as high thermal stability, low-cost productions, and simple manufacturing processes. Re-use of mirror waste, which consists of silicon dioxide greater than 70%, is a method that can reduce raw materials cost. In this work, ceramic pigment with forsterite structure, Mg2SiO4, was synthesized via conventional solid state reaction by using mirror waste as a precursor. Solid solutions of Co-doped forsterite pigment, CoxMg(2−x)SiO4 where x = 0.02–1.6, were calcined at 1000 °C for 2 h. The calcined powders were characterized by X-ray diffraction technique (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), UV-Vis spectrophotometer, and color measurement (CIEL*a*b*). XRD results confirmed that forsterite phase was found as a main phase in the ceramic powder. However, the forsterite phase decreased with increased concentration of Co to x = 0.8–1.6. This could be because of the solubility limit of Co in solid solution. In addition, the use of mirror waste as a raw material was able to reduce calcination temperature compared to the use of oxide reagents. Color measurements or CIEL*a*b* color space of forsterite pigments were located in red-blue quadrant for Co-doped pigment.