FCFeng-Min Cheng

Feng-Min Cheng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Feng-Min Cheng has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • External cavity quantum cascade laser with bias assisted tuning

    by Shan Niu, Yongqiang Sun, FengMin Cheng, Ning Zhuo, Shenqiang Zhai, RuiXuan Sun, XiYu Lu, FengQi Liu, QuanYong Lu, JinChuan Zhang


  • Open Access

    High-Power Terahertz Photonic Crystal Surface-Emitting Laser with High Beam Quality

    by Junhong Liu, Yunfei Xu, Rusong Li, Jinchuan Zhang, Ning Zhuo, Junqi Liu, Lijun Wang, Fengmin Cheng, Shuman Liu, Fengqi Liu, et al.

    The photonic crystal surface-emitting laser (PCSEL) has attracted much attention due to the advantages of a small far-field divergence angle and high output power. Here, we report a high-power terahertz (THz) photonic crystal laser with high beam quality through the optimization of the absorption boundary condition and the introduction of the symmetrically distributed electrodes. Single-mode surface emission at 3.4 THz with the maximum peak output power of 50 mW is demonstrated. Meanwhile, a high symmetric far-field pattern with C6 symmetry and a small divergence angle is achieved. In this device, the integration of the stable single-mode operation, high beam quality and high output power is realized, which may have great significance for practical applications.


  • Open Access

    Wavelength-Stable Metal Grating Distributed Feedback Quantum Cascade Laser Emitting at λ ~ 7.2 μm

    by Kedi Ma, Zizhuo Liu, Fengmin Cheng, Pengchang Yang, Hongxiao Li, Shan Niu, Gaohui Ge, Hao Xu, Ning Zhuo, Hui Su, et al.

    In this research, we demonstrate a wavelength-stable continuous wave (CW) distributed feedback (DFB) quantum cascade laser (QCL) emitting at 7.2 μm using a surface metal grating approach without epitaxial regrowth. The deep metal grating provides an appropriate DFB coupling coefficient and enhanced thermal extraction, resulting in improved lasing performance and the realization of impressive wavelength stability. Quantitatively, the temperature tuning coefficient of the single-mode emission is only 0.54 nm/°C from 20 °C to 70 °C, and the current tuning coefficient of the single-mode emission is 3.2 nm/A from 1.0 A to 1.6 A. A DFB-QCL with a 2 mm cavity length exhibits a low threshold current of 0.6 A and a power of 1.1 W with a slope efficiency of 1 W/A in the CW mode at 300 K. A single-mode operation with a side mode suppression ratio of 33 dB and a single-lobed far-field without beam steering is obtained in the working temperature range of 20–70 °C The improved wavelength stability using a deep surface metal grating approach promises simplified fabrication, which is meaningful for the commercial applications of QCLs.


  • Open Access

    Anomalous Mode Transitions in High Power Distributed Bragg Reflector Quantum Cascade Lasers

    by Feng-Min Cheng, Jin-Chuan Zhang, Zeng-Hui Gu, Dong-Bo Wang, Ning Zhuo, Shen-Qiang Zhai, Li-Jun Wang, Jun-Qi Liu, Shu-Man Liu, Feng-Qi Liu, et al.

    In this paper, an anomalous spectral data of distributed Bragg reflector (DBR) quantum cascade lasers (QCLs) emitting around 7.6 μm is presented. The two-section DBR lasers, consisting of a gain section and an unpumped Bragg reflector, display an output power above 0.6 W in continuous wave (CW) mode at room temperature. The anomalous spectral data is defined as a longitudinal mode which moves toward shorter wavelengths with increasing temperature or injection current, which is unexpected. Although the longer wavelength modes are expected to start lasing when raising device temperature or injection current, occasional mode hops to a shorter wavelength are seen. These anomalous mode transitions are explained by means of modal analysis. The thermal-induced change of the refractive index implied by an increase in the temperature or injection current yields nearly periodic transitions between cavity modes.


  • Open Access

    Demonstration of High-Power and Stable Single-Mode in a Quantum Cascade Laser Using Buried Sampled Grating

    by Feng-Min Cheng, Jin-Chuan Zhang, Dong-Bo Wang, Zeng-Hui Gu, Ning Zhuo, Shen-Qiang Zhai, Li-Jun Wang, Jun-Qi Liu, Shu-Man Liu, Feng-Qi Liu, et al.

    High-power, low-threshold stable single-mode operation buried distributed feedback quantum cascade laser by incorporating sampled grating emitting at λ ~ 4.87 μm is demonstrated. The high continuous wave (CW) output power of 948 mW and 649 mW for a 6-mm and 4-mm cavity length is obtained at 20 °C, respectively, which benefits from the optimized optical field distribution of sampled grating. The single-mode yields of the devices are obviously enhanced by controlling cleaved positions of the two end facets precisely. As a result, stable single-mode emission and mode tuning linearly without any mode hopping of devices are obtained under the different heat sink temperatures or high injection currents.


  • Open Access

    Tapered Quantum Cascade Laser Arrays Integrated with Talbot Cavities

    by Yue Zhao, Jin-Chuan Zhang, Feng-Min Cheng, Dong-Bo Wang, Chuan-Wei Liu, Ning Zhuo, Shen-Qiang Zhai, Li-Jun Wang, Jun-Qi Liu, Shu-Man Liu, et al.

    Power scaling in broad area quantum cascade laser (QCL) usually leads to the deterioration of the beam quality with an emission of multiple lobes far-field pattern. In this letter, we demonstrate a tapered QCL array integrated with Talbot cavity at one side of the array. Fundamental supermode operation is achieved in the arrays with taper straight-end connected to the Talbot cavity. Lateral far-field of the fundamental supermode shows a near diffraction limited beam divergence of 2.7°. The output power of a five-element array is about three times as high as a single-ridge laser with an emission wavelength of around 4.8 μm. However, arrays with the taper-end connected to the Talbot cavity always show a high-order supermode operation whatever Talbot cavity length is.


  • Open Access

    Stable Single-Mode Operation of Distributed Feedback Quantum Cascade Laser by Optimized Reflectivity Facet Coatings

    by Dong-Bo Wang, Jin-Chuan Zhang, Feng-Min Cheng, Yue Zhao, Ning Zhuo, Shen-Qiang Zhai, Li-Jun Wang, Jun-Qi Liu, Shu-Man Liu, Feng-Qi Liu, et al.

    In this work, quantum cascade lasers (QCLs) based on strain compensation combined with two-phonon resonance design are presented. Distributed feedback (DFB) laser emitting at ~ 4.76 μm was fabricated through a standard buried first-order grating and buried heterostructure (BH) processing. Stable single-mode emission is achieved under all injection currents and temperature conditions without any mode hop by the optimized antireflection (AR) coating on the front facet. The AR coating consists of a double layer dielectric of Al2O3 and Ge. For a 2-mm laser cavity, the maximum output power of the AR-coated DFB-QCL was more than 170 mW at 20 °C with a high wall-plug efficiency (WPE) of 4.7% in a continuous-wave (CW) mode.