ZYZhenhua Yan

Zhenhua Yan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhenhua Yan has a total of 390 co-authors. Here are the top co-authors by number of shared publications:

  • Jun Chen

    Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), State Key Laboratory of Advanced Chemical Power Sources, College of Chemistry, Nankai University, Tianjin, China

    54 shared publications
  • Kai Zhang

    Nankai University

    33 shared publications
  • Haixia Li

    Nankai University

    19 shared publications
  • Youxuan Ni

    State Key Laboratory of Advanced Chemical Power Sources Frontiers Science Center for New Organic Matter Haihe Laboratory of Sustainable Chemical Transformations Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education) College of Chemistry Nankai University Tianjin 300071 P.R. China

    15 shared publications
  • Yong Lu

    Frontiers Science Center for New Organic Matter Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education) State Key Laboratory of Advanced Chemical Power Sources College of Chemistry Nankai University Tianjin China

    14 shared publications
  • Fangyi Cheng

    Nankai University

    11 shared publications

Latest Publications

  • Solvation Cluster Engineering of Non-Fluorinated Ethers toward High-Energy Lithium Metal Batteries

    by Xinyi Liu, Shuang Wu, Jinze Hou, Wenbo Zhou, Mao Guo, Haixia Li, Zhenhua Yan, Yong Lu, Jun Chen

    Lithium metal batteries (LMBs) can provide high energy density for next-generation energy storage, yet their cycle life remains limited by interfacial incompatibility between electrolyte species and electrodes. Conventional electrolytes based on polar or fluorinated solvents often suffer from sluggish transport kinetics, high cost, and even environmental concerns. Herein, we rationally modulate the polarity and coordination ability of nonfluorinated solvents and report a fluorine-free host–guest synergy electrolyte (HGSE) constructed by tailoring the intermolecular interaction between a long-chain multidentate ether and a monodentate ether solvent. The weak Hδ+–Oδ− intermolecular interaction between these solvents tunes the electrolyte coordination ability and solvation cluster size, leading to a contact ion pair-dominated solvation cluster structure with enhanced ionic conductivity. Meanwhile, the optimized solvation cluster in HGSE promotes anion decomposition while suppressing electrode side reactions, resulting in anion-derived LiF-rich interphases and minimized cathode cracking. More notably, the HGSE electrolyte enables a Li||NCM811 pouch cell to deliver a high energy density of 472.5 Wh kg–1, while a 20 Ah-level anode-free Cu||Ni90 pouch cell with a lean electrolyte (1.5 g Ah–1) achieves a superior energy density of 525 Wh kg–1 with 71.6% capacity retention over 120 cycles. These findings elucidate the role of intermolecular interactions and solvation cluster engineering in high-energy and sustainable LMBs.

  • Open Access

    Suppressing Side Reaction via Fluorinated Core–Shell Electrolyte for Durable 4.8 V Li‐Rich Batteries

    by Kaiwen Shi, Donglei Zhao, Haoxiang Sun, Haixia Li, Kai Zhang, Zhenhua Yan, Yong Lu, Jun Chen

    Lithium‐rich Mn‐based cathode materials with high energy density hold promise for enabling > 500 Wh kg −1 batteries; however, the reactive oxygen species (ROS) generated at high voltages trigger electrolyte decomposition and gas evolution, posing severe interfacial stability challenges and safety risks. Herein, a “side‐reaction inhibition” strategy is proposed by employing a bulky, ROS‐stable diluent to modulate core–shell solvation structures and shield highly reactive solvents, effectively suppressing interfacial side reactions. As a result, a 2.5 Ah pouch cell with an ultrahigh areal capacity of 9.6 mAh cm −2 achieves 502.7 Wh kg −1 and delivers a capacity retention of 89.85% after 50 cycles at 0.1 C, while significantly suppressing gas evolution. This work provides novel insights into electrolyte design for high‐voltage lithium metal batteries through targeted mitigation of reactive oxygen species side effects.

  • Open Access

    Bulky Molecules Tailor Solvent Packing Fraction of Electrolytes for High‐Voltage Sodium‐Ion Battery

    by Yuewei Cui, Shilong Dong, Jiahao Wang, Shuang Wu, Mao Guo, Anqi Zhang, Qiang Liu, Bingkun Wu, Kai Zhang, Youxuan Ni, et al.

    High‐voltage sodium‐ion batteries (SIBs) suffer from rapid degradation caused by electrolyte oxidation and interfacial parasitic reactions, which are strongly influenced by the local solvation environment near the electrode surface. However, conventional electrolyte design focuses on tuning Na + –solvent interactions while overlooking solvent packing within the solvation shell. Herein, we reveal that a bulky molecular solvent mediates restricted solvent packing around Na + , with its reduced packing efficiency quantitatively described by the fractal dimension ( D f ). The enlarged molecular volume creates a more open solvation environment, facilitating anion participation and promoting ion clusters dominated by contact ion pairs (CIPs) and small aggregates (SAGGs). The resulting inorganic‐rich interphase suppresses electrolyte oxidation and interfacial parasitic reactions, enabling stable high‐voltage operation. Sodium iron sulfate (NFS) paired with the bulky‐solvent electrolyte retains 80% capacity over 1407 cycles at 1 C. An Ah‐level HC||NFS pouch cell retains 81.53% capacity after 500 cycles. A practical pouch cell further achieves 115.05 Wh kg −1 and retains 80.87% of its capacity after 150 cycles. This work demonstrates that restricted solvent packing can modulate ion association and interfacial chemistry, providing a molecular design consideration for high‐energy SIBs.

  • V─O─Ti Bridge‐Bond Polarity Boosts Na + Migration in V‐Based Fluorophosphates for Fast Sodium Storage

    by Bochao Chen, Ruihan Wang, Yifei Liu, Yuan Feng, Jiahao Wang, Changjie Kan, Boyuan Li, Lin Wang, Weiwei Xie, Kai Zhang, et al.

    Vanadium‐based fluorophosphates are promising high‐energy‐density cathodes for next‐generation sodium‐ion batteries (SIBs). However, the pronounced degradation of Na + diffusion at high voltage hinders their fast‐charging capability. Herein, a Ti 4+ ‐doping‐induced bridge‐bond‐polarity‐driven strategy is proposed to reshape the V electronic structure for facilitating V─O electron exchange. Correspondingly, voltage hysteresis, polarization, and structural distortion at high voltage are suppressed, accompanied by enhanced electronic conductivity. Meanwhile, the polar V─O─Ti bridge bonds expand the dominant one‐ and two‐dimensional Na + transport channels by inducing bridging‐O displacement, further boosting Na + migration capability. Therefore, Na 3 V 1.92 Ti 0.08 O(PO 4 ) 2 F 2 with V─O─Ti delivers high capacities of 121.8 and 62.1 mA h g −1 at 0.1C and 50C, respectively, while maintaining excellent cycling stability. Additionally, the 0.92‐Ah Na 3 V 1.92 Ti 0.08 O(PO 4 ) 2 F 2 //HC pouch cell exhibits 80% capacity retention after 1000 cycles at 1C. At the 9 Ah scale, the pouch cell achieves a high energy density of 154 Wh kg −1 . This synergistic reinforcement strategy driven by bridge‐bond polarity paves the way for sustainable high‐power polyanionic SIBs.

  • V─O─Ti Bridge‐Bond Polarity Boosts Na + Migration in V‐Based Fluorophosphates for Fast Sodium Storage

    by Bochao Chen, Ruihan Wang, Yifei Liu, Yuan Feng, Jiahao Wang, Changjie Kan, Boyuan Li, Lin Wang, Weiwei Xie, Kai Zhang, et al.

    Vanadium‐based fluorophosphates are promising high‐energy‐density cathodes for next‐generation sodium‐ion batteries (SIBs). However, the pronounced degradation of Na + diffusion at high voltage hinders their fast‐charging capability. Herein, a Ti 4+ ‐doping‐induced bridge‐bond‐polarity‐driven strategy is proposed to reshape the V electronic structure for facilitating V─O electron exchange. Correspondingly, voltage hysteresis, polarization, and structural distortion at high voltage are suppressed, accompanied by enhanced electronic conductivity. Meanwhile, the polar V─O─Ti bridge bonds expand the dominant one‐ and two‐dimensional Na + transport channels by inducing bridging‐O displacement, further boosting Na + migration capability. Therefore, Na 3 V 1.92 Ti 0.08 O(PO 4 ) 2 F 2 with V─O─Ti delivers high capacities of 121.8 and 62.1 mA h g −1 at 0.1C and 50C, respectively, while maintaining excellent cycling stability. Additionally, the 0.92‐Ah Na 3 V 1.92 Ti 0.08 O(PO 4 ) 2 F 2 //HC pouch cell exhibits 80% capacity retention after 1000 cycles at 1C. At the 9 Ah scale, the pouch cell achieves a high energy density of 154 Wh kg −1 . This synergistic reinforcement strategy driven by bridge‐bond polarity paves the way for sustainable high‐power polyanionic SIBs.

  • Process‐Oriented Interphase Regulation in Lithium Metal Batteries with Non‐Aqueous Liquid Electrolytes

    by Yingrui Liu, Shuang Liu, Sai Che, Chong Xu, Quan Xu, Yongfeng Li, Zhenhua Yan

    Lithium metal batteries (LMBs) are promising candidates for high‐energy‐density energy storage systems. However, their practical applications are severely hindered by interfacial instability and uncontrolled lithium deposition, which lead to dendrite growth, low Coulombic efficiency, and rapid capacity decay. In this review, we systematically analyze interfacial processes in LMBs with non‐aqueous liquid electrolytes from a process‐oriented perspective. We employ a six‐step kinetic framework involving ion transport, desolvation, interphase transport, charge transfer, nucleation, and morphological evolution. We first discuss the fundamental structure and dynamic evolution of electrode‐electrolyte interphases, followed by an overview of advanced characterization techniques across multiple length and time scales. Furthermore, recent strategies for regulating interfacial stability are critically summarized, including electrolyte additives, artificial protective layers, and solvation regulation designs. Instead of categorizing these strategies solely by materials, we emphasize their roles in regulating key kinetic steps and clarify the underlying mechanisms within the six‐step process. Finally, we highlight current challenges and future directions toward practical LMBs, including full‐cell and pouch‐cell validation, high energy density, cost reduction, and manufacturing compatibility. This work aims to provide a unified framework for understanding, characterizing, and regulating interfacial stability in lithium metal batteries.


  • Open Access

    Rational atomic-site engineering of spinel oxides for high-performance oxygen evolution catalysis

    by Long Shang, Zilan Zhang, Hefei Gao, Feifei Zhang, Wenzhuo Bian, Jing Zhou, Haixia Li, Pengfei Yin, Rui Zhang, Xiwen Du, et al.

  • Skin-Like Coating Stabilizes the In Situ Forming Lithium Anode for High-Energy-Density Batteries

    by Chenyu Wang, Xiaomeng Tian, Yuan Feng, Xingwei Sun, Lin Zhu, Haixia Li, Kai Zhang, Jun Chen, Zhenhua Yan

    In situ forming lithium metal batteries (IFLMBs) offer higher energy density and improved safety. However, lithiophobic Cu current collectors trigger nonuniform Li nucleation and dendrite growth, causing rapid Li inventory depletion and poor cycling stability. Herein, inspired by the selective transport regulation and barrier protection functions of the skin, a skin-like hydrolyzed collagen (HC) layer derived from biomass is constructed on Cu to stabilize IFLMBs. The ultrathin HC layer tightly covers the Cu surface as a biomolecular “skin”, physically isolating deposited Li from the electrolyte and suppressing parasitic corrosion. Meanwhile, HC also serves as a durable lithiophilic nucleation scaffold. The abundant amide groups can act as lithiophilic active sites, redistributing Li+ flux and guiding uniform lithium nucleation. Accordingly, HC-coated Cu (HCCu) exhibits an increased Li+ transference number (0.71) and a reduced Li nucleation overpotential (13 mV). At a deposition capacity of 3 mAh cm−2, HCCu enables compact Li deposition with a thickness of 16.2 μm, which approaches the theoretical value of 15 μm. Consequently, Li||HCCu cells deliver a high average coulombic efficiency (CE) of 99.2% over 400 cycles. Moreover, a 6.4 Ah HCCu||LRMO pouch cell achieves a high energy density of 578.5 Wh kg−1, providing a viable pathway toward scalable, energy-dense IFLMBs.

  • Open Access

    Plastic‐Deformation‐Driven Nonepitaxial Deposition of (110)‐Texture Enables Stable Lithium and Sodium Metal Anodes

    by Xingwei Sun, Chenjun Fu, Chenyu Wang, Jiangtao Yu, Yang Feng, Xiaomeng Tian, Kai Zhang, Zhenhua Yan, Yong Lu, Jun Chen

    Uncontrolled Li deposition and dendrite growth severely limit the cycle life of Li metal batteries. Realizing (110)‐oriented Li deposition is an effective strategy for mitigating these issues. However, current regulation methods generally rely on specific substrates or constrained electrochemical conditions, limiting their universality and overlooking the intrinsic mechanical responses of Li. Here we demonstrate a stress‑driven plastic deformation mechanism that drives a nonepitaxial yet (110)‑preferred growth mode independent of external chemistry or substrate structure. The applied stress drives plastic deformation predominantly via crystallographic slip, which gradually reorients grains and strengthens the (110) texture. It markedly improves electrochemical stability, enabling Li||Li symmetric cells to cycle for over 2000 h and Li||NCM811 full cells for over 500 cycles. Importantly, this strategy relies solely on the intrinsic mechanical properties of Li, requiring neither substrate modification nor interfacial engineering, thus ensuring broad compatibility across various systems. The principle also extends to sodium metal anodes, where analogous stress‐driven (110) texture formation is achieved. This work effectively decouples crystallographic orientation control from conventional epitaxial constraints, establishing a universal mechanics‐based approach for regulating alkali metal deposition.

  • Open Access

    Dual-phase engineering of CFx electrode and interphase enables low-temperature Li||CFx batteries

    by Wei Wang, Wang Qiao, Zhuo Chen, Jialei Chen, Shan Chen, Zhuang Zhao, Xuelong Liao, Wenge Song, Rong Huang, Tiantian Lu, et al.

    Low-temperature Li||CFx batteries undergo performance degradation due to the insulating nature of CFx and sluggish Li+ kinetics. Herein, we present a dual-modification strategy integrating porous positive electrode architecture design with customized electrode-electrolyte interphase engineering to overcome these limitations. Our approach features: (i) plasma-enhanced chemical vapor deposition-constructed mesoporous CFx with conformal carbon coating, and (ii) electrolyte-mediated in situ formation of a sulfur-rich inorganic interphase layer on CFx surface. The engineered porous framework establishes efficient Li+ diffusion channels, while the electrolyte-derived interphase significantly enhances Li+ transport and desolvation kinetics. Moreover, the carbon coating substantially improves electronic conductivity and suppresses LiF stacking. The optimized Li||CFx system delivers capacities of 428.4 mAh g−1 at −50 °C and 2 A g−1, and 333.4 mAh g−1 at −70 °C and 0.1 A g−1. Practical 5 Ah pouch cells deliver competitive specific energies of 470 and 332 Wh kg−1 at −50 and −70 °C under 0.01 A g−1, respectively.