Michael Schauseil
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Michael Schauseil has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Andreas Hellak
Department of Orthodontics, University Hospital Giessen and Marburg, Campus Marburg, Georg-Voigt-Strasse 3, Marburg, 35039, Germany.
4 shared publications - Heike Korbmacher-Steiner
Philipps-Universität Marburg, Clinic of Dentistry, Department of Orthodontics, Georg-Voigt-Str. 3, Marburg 35039, Germany
3 shared publications - Nicola Schmidt
Department of Orthodontics, University Hospital Giessen and Marburg, Campus Marburg, Georg-Voigt-Strasse 3, 35039 Marburg, Germany
2 shared publications - Steffen Stein
University of Marburg
2 shared publications - Thomas Drechsler
Fachpraxis für Kieferorthopädie, Wiesbaden
2 shared publications - Andreas Hellak
University of Marburg, Georg-Voigt-Str. 3, Marburg 35039, Germany
1 shared publication
Latest Publications
- Open Access
- 8 June 2018
- Published by Springer Nature in BMC Oral Health
- Vol. 18 (1) , 103
Influence on interradicular bone volume of Invisalign treatment for adult crowding with interproximal enamel reduction: a retrospective three-dimensional cone-beam computed tomography study
The aim of this study was to use three-dimensional datasets to identify associations between treatment for adult crowding, using Invisalign aligner and interproximal enamel reduction (IER), and changes in the volume of interradicular bone. A total of 60 cone-beam computed tomography (CBCT) scans from 30 adult patients (28 women, two men; 30 CBCTs pre-treatment, 30 post-treatment) were examined retrospectively in order to measure bone volume three-dimensionally. The patients’ average age was 36.03 ± 9.7 years. The interradicular bone volume was measured with OsiriX at four levels in the anterior tooth areas of the maxilla and mandible. Differences in bone between T0 and T1 were analyzed with IBM SPSS 21.0 using the Wilcoxon test for paired samples. Overall, a slight increase in the quantity of bone was found (0.12 ± 0.73 mm). There was a highly significant increase in bone in the mandible (0.40 ± 0.62 mm; P < 0.001), while in the maxilla there was a slight loss of bone, which was highly significant in the apical third (− 0.16 ± 0.77 mm; P = 0.001). Overall, treatment for adult crowding using an aligner and IER appears to have a positive effect on interradicular bone volume, particularly in patients with severe grades of the condition (periodontally high-risk dentition). This effect is apparently independent of IER. This is extremely important with regard to the treatment outcome, since IER and root proximity have been matters of debate in the literature and teeth should remain firmly embedded in their alveolar sockets.
- 8 June 2018
- Published by Springer Nature in BMC Oral Health
- Vol. 18 (1) , 103
Open AccessInfluence on interradicular bone volume of Invisalign treatment for adult crowding with interproximal enamel reduction: a retrospective three-dimensional cone-beam computed tomography study
The aim of this study was to use three-dimensional datasets to identify associations between treatment for adult crowding, using Invisalign aligner and interproximal enamel reduction (IER), and changes in the volume of interradicular bone. A total of 60 cone-beam computed tomography (CBCT) scans from 30 adult patients (28 women, two men; 30 CBCTs pre-treatment, 30 post-treatment) were examined retrospectively in order to measure bone volume three-dimensionally. The patients’ average age was 36.03 ± 9.7 years. The interradicular bone volume was measured with OsiriX at four levels in the anterior tooth areas of the maxilla and mandible. Differences in bone between T0 and T1 were analyzed with IBM SPSS 21.0 using the Wilcoxon test for paired samples. Overall, a slight increase in the quantity of bone was found (0.12 ± 0.73 mm). There was a highly significant increase in bone in the mandible (0.40 ± 0.62 mm; P < 0.001), while in the maxilla there was a slight loss of bone, which was highly significant in the apical third (− 0.16 ± 0.77 mm; P = 0.001). Overall, treatment for adult crowding using an aligner and IER appears to have a positive effect on interradicular bone volume, particularly in patients with severe grades of the condition (periodontally high-risk dentition). This effect is apparently independent of IER. This is extremely important with regard to the treatment outcome, since IER and root proximity have been matters of debate in the literature and teeth should remain firmly embedded in their alveolar sockets.
- Open Access
- 1 September 2016
- Published by Springer Nature in BMC Oral Health
- Vol. 16 (1) , 1-10
Influence of Invisalign treatment with interproximal enamel reduction (IER) on bone volume for adult crowding: a retrospective three-dimensional cone beam computed tomography study
The aim of this study was to use three-dimensional datasets to identify associations between treatment for adult crowding using Invisalign and interproximal enamel reduction (IER) and changes in the bone volume. A total of 60 digital cone beam computed tomography (CBCT) scans from 30 patients (28 women, two men; 30 CBCTs pretreatment, 30 posttreatment) were examined retrospectively in order to record bone volume three-dimensionally before and after treatment. The patients’ average age was 36.03 ± 9.7 years. The data were collected and analyzed using the computer programs Mimics 15.0 and OsiriX. Differences in bone between T0 and T1 were analyzed with IBM SPSS 21.0 using the Wilcoxon test for paired samples. Analysis of the orovestibular bone volume showed highly significant changes (bone change P <0.001) only in the mandible where more expansion of the dental arch was carried out using proclination or protrusion. The bone lamella was thinner buccally and thicker lingually. In general, bone increases in the oral direction were slightly greater than bone losses in the vestibular direction. No significant changes were detected in the maxilla (bone change P = 0.13). Significant vertical bone loss in the bone height was detected in both the maxilla and the mandible. The largest bone loss was observed in the vestibular direction in the mandible, at a high level of significance (P <0.001). Particularly in the mandible, therapeutic reduction of the vertical and sagittal bone volume shows that caution should be used in the treatment of tertiary crowding with proclination and expansion. The cortical walls appear to represent the limits for orthodontic tooth movement, at least in adult female patients.
- 1 September 2016
- Published by Springer Nature in BMC Oral Health
- Vol. 16 (1) , 1-10
Open AccessInfluence of Invisalign treatment with interproximal enamel reduction (IER) on bone volume for adult crowding: a retrospective three-dimensional cone beam computed tomography study
The aim of this study was to use three-dimensional datasets to identify associations between treatment for adult crowding using Invisalign and interproximal enamel reduction (IER) and changes in the bone volume. A total of 60 digital cone beam computed tomography (CBCT) scans from 30 patients (28 women, two men; 30 CBCTs pretreatment, 30 posttreatment) were examined retrospectively in order to record bone volume three-dimensionally before and after treatment. The patients’ average age was 36.03 ± 9.7 years. The data were collected and analyzed using the computer programs Mimics 15.0 and OsiriX. Differences in bone between T0 and T1 were analyzed with IBM SPSS 21.0 using the Wilcoxon test for paired samples. Analysis of the orovestibular bone volume showed highly significant changes (bone change P <0.001) only in the mandible where more expansion of the dental arch was carried out using proclination or protrusion. The bone lamella was thinner buccally and thicker lingually. In general, bone increases in the oral direction were slightly greater than bone losses in the vestibular direction. No significant changes were detected in the maxilla (bone change P = 0.13). Significant vertical bone loss in the bone height was detected in both the maxilla and the mandible. The largest bone loss was observed in the vestibular direction in the mandible, at a high level of significance (P <0.001). Particularly in the mandible, therapeutic reduction of the vertical and sagittal bone volume shows that caution should be used in the treatment of tertiary crowding with proclination and expansion. The cortical walls appear to represent the limits for orthodontic tooth movement, at least in adult female patients.
- 1 March 2016
- Published by Elsevier in Journal of Cranio-Maxillofacial Surgery
- Vol. 44 (3) , 285-293
Comparison of tooth-borne and hybrid devices in surgically assisted rapid maxillary expansion: A randomized clinical cone-beam computed tomography study
- 1 March 2016
- Published by Elsevier in Journal of Cranio-Maxillofacial Surgery
- Vol. 44 (3) , 285-293
Comparison of tooth-borne and hybrid devices in surgically assisted rapid maxillary expansion: A randomized clinical cone-beam computed tomography study
- Open Access
- 9 July 2015
- Published by Springer Nature in Head & Face Medicine
- Vol. 11 (1) , 23
Influence of maxillary advancement surgery on skeletal and soft-tissue changes in the nose — a retrospective cone-beam computed tomography study
Surgical correction of skeletal maxillary retroposition is often associated with changes in the morphology of the nose. Unwanted alar flaring of the nose is observed in many cases. The aim of the present study was therefore to investigate the influence of surgical advancement of the maxilla on changes in the soft-tissue morphology of the nose. Having a coefficient that allows prediction of change in the nasal width in Caucasian patients after surgery would be helpful for treatment planning. All 33 patients included in this retrospective study were of Caucasian descent and had skeletal Class III with maxillary retrognathia. They were all treated with maxillary advancement using a combination of orthodontic and maxillofacial surgery methods. Two cone-beam computed tomography (CBCT) datasets were available for all of the study's participants (16 female, 17 male; age 24.3 ± 10.4 years): the first CBCT imaging was obtained before the planned procedure (T0) and the second 14.1 ± 6.4 months postoperatively (T1). Morphological changes were recorded three-dimensionally using computer-aided methods (Mimics (Materialise NV, Leuven/Belgium), Geomagic (Geomagics, Morrisville/USA)). Statistical analysis was carried out using SPSS 21 for Mac. The mean sagittal advancement of the maxilla was 5.58 mm. The width of the nose at the alar base (Alb) changed by a mean of + 2.59 mm (±1.26 mm) and at the ala (Al) by a mean of + 3.17 mm (±1.32 mm). Both of these changes were statistically highly significant (P = 0.000). The increase in the width of the nose corresponded to approximately half of the maxillary advancement distance in over 80 % of the patients. The nasolabial angle declined by an average of −6.65° (±7.71°). Maxillary advancement correlates with a distinct morphological change in nasal width. This should be taken into account in the treatment approach and in the information provided to patients.
- 9 July 2015
- Published by Springer Nature in Head & Face Medicine
- Vol. 11 (1) , 23
Open AccessInfluence of maxillary advancement surgery on skeletal and soft-tissue changes in the nose — a retrospective cone-beam computed tomography study
Surgical correction of skeletal maxillary retroposition is often associated with changes in the morphology of the nose. Unwanted alar flaring of the nose is observed in many cases. The aim of the present study was therefore to investigate the influence of surgical advancement of the maxilla on changes in the soft-tissue morphology of the nose. Having a coefficient that allows prediction of change in the nasal width in Caucasian patients after surgery would be helpful for treatment planning. All 33 patients included in this retrospective study were of Caucasian descent and had skeletal Class III with maxillary retrognathia. They were all treated with maxillary advancement using a combination of orthodontic and maxillofacial surgery methods. Two cone-beam computed tomography (CBCT) datasets were available for all of the study's participants (16 female, 17 male; age 24.3 ± 10.4 years): the first CBCT imaging was obtained before the planned procedure (T0) and the second 14.1 ± 6.4 months postoperatively (T1). Morphological changes were recorded three-dimensionally using computer-aided methods (Mimics (Materialise NV, Leuven/Belgium), Geomagic (Geomagics, Morrisville/USA)). Statistical analysis was carried out using SPSS 21 for Mac. The mean sagittal advancement of the maxilla was 5.58 mm. The width of the nose at the alar base (Alb) changed by a mean of + 2.59 mm (±1.26 mm) and at the ala (Al) by a mean of + 3.17 mm (±1.32 mm). Both of these changes were statistically highly significant (P = 0.000). The increase in the width of the nose corresponded to approximately half of the maxillary advancement distance in over 80 % of the patients. The nasolabial angle declined by an average of −6.65° (±7.71°). Maxillary advancement correlates with a distinct morphological change in nasal width. This should be taken into account in the treatment approach and in the information provided to patients.
- 3 April 2015
- Published by Springer Nature in European Archives of Oto-Rhino-Laryngology
- Vol. 273 (3) , 679-687
Rapid-maxillary-expansion induced rhinological effects: a retrospective multicenter study
Conventional dental-borne rapid maxillary expansion (RME) leads to a widening of the airways, followed by improved nasal breathing. Although combined skeletal–dental appliances are nowadays being inserted increasingly often and provide a force at the center of resistance in the nasomaxillary complex, no study exists so far that shows whether this treatment may improve the expansionary effect on the airways. In this study, low-dose computed tomography (CT) images from 31 patients (average age 14.63 ± 0.38 years) were examined retrospectively. Both records (T0 = before expansion and T1 = immediately after maximum expansion) were taken in a time interval of 25 days to avoid growth influence. Five patients were treated with Hyrax RME, 6 patients with Hybrid RME, and 20 patients with acrylic cap RME. The total airway volume increased highly significantly (mean +7272.6 mm3; P < 0.001, power = 0.998), representing an average airway expansion of +11.54 % (2.35 %/mm activation). While the nasopharynx and oropharynx showed highly significant expansion (P < 0.000, power = 0.999), the airway at the laryngopharynx did not change significantly (P > 0.779, power = 0.05). Although the patients were significantly older in the Hybrid RME group (P = 0.006), the positive rhinological effects were comparable within all groups of different appliances (P > 0.316). Hybrid RME may, therefore, be an advisable procedure in patients with nasomaxillary impairment and pronounced patient’s age.
- 3 April 2015
- Published by Springer Nature in European Archives of Oto-Rhino-Laryngology
- Vol. 273 (3) , 679-687
Rapid-maxillary-expansion induced rhinological effects: a retrospective multicenter study
Conventional dental-borne rapid maxillary expansion (RME) leads to a widening of the airways, followed by improved nasal breathing. Although combined skeletal–dental appliances are nowadays being inserted increasingly often and provide a force at the center of resistance in the nasomaxillary complex, no study exists so far that shows whether this treatment may improve the expansionary effect on the airways. In this study, low-dose computed tomography (CT) images from 31 patients (average age 14.63 ± 0.38 years) were examined retrospectively. Both records (T0 = before expansion and T1 = immediately after maximum expansion) were taken in a time interval of 25 days to avoid growth influence. Five patients were treated with Hyrax RME, 6 patients with Hybrid RME, and 20 patients with acrylic cap RME. The total airway volume increased highly significantly (mean +7272.6 mm3; P < 0.001, power = 0.998), representing an average airway expansion of +11.54 % (2.35 %/mm activation). While the nasopharynx and oropharynx showed highly significant expansion (P < 0.000, power = 0.999), the airway at the laryngopharynx did not change significantly (P > 0.779, power = 0.05). Although the patients were significantly older in the Hybrid RME group (P = 0.006), the positive rhinological effects were comparable within all groups of different appliances (P > 0.316). Hybrid RME may, therefore, be an advisable procedure in patients with nasomaxillary impairment and pronounced patient’s age.
- Open Access
- 25 March 2015
- Published by Springer Nature in BMC Oral Health
- Vol. 15 (1) , 42
Effect on enamel shear bond strength of adding microsilver and nanosilver particles to the primer of an orthodontic adhesive
The objective of this study was to determine whether the addition of microsilver or nanosilver particles to an orthodontic primer affects shear bond strength (SBS) and bracket/adhesive failure. Bovine incisors were randomly divided into six groups with 16 specimens in each: In group 1 (control), brackets were bonded with Transbond™ XT primer. In the experimental groups, microsilver (groups 2 and 3) and nanosilver (groups 4–6) particles of different sizes were added to Transbond XT primer and light cured for 15 seconds [group 2: 0.1% (w/w) microsilver particle size 3.5–18 μm; group 3: 0.3% (w/w) microsilver particle size 3.5–18 μm; group 4: 0.11% (w/w) nanosilver particle size 12.6–18.5 nm; group 5: 0.18% (w/w) nanosilver particle size 12.6–18.5 nm; group 6: 0.33% (w/w) nanosilver particle size 12.6–18.5 nm]. Thereafter, brackets were bonded by light curing the adhesive for 20 seconds. After 24 hours of storage in distilled water at 37°C, SBS was measured with a Zwicki 1120 testing machine. The adhesive remnant index and the prevalence of silver spots on the specimen surface were determined under 10× magnification. Statistical two-way analysis of variance was performed to compare SBS, and a chi-square test was used to compare ARI scores and the prevalence of silver spots. No significant differences in SBS (control: 16.59 ± 6.82 MPa; group 2: 20.6 ± 4.19 MPa; group 3: 16.98 ± 4.84 MPa; group 4: 17.15 ± 5.92 MPa; group 5: 20.09 ± 3.35 MPa; group 6: 16.44 ± 4.51 MPa; p > 0.665) and ARI scores (p = 0.901) were found between the control group and any experimental group. Only experimental groups with nanosilver particles revealed statistically more silver spots on the remaining adhesive. Addition of small concentrations of microsilver or nanosilver particles affects neither SBS nor ARI scores. Addition of nanosilver particles results in silver spots in the remaining primer visible under 10× magnification. Further studies are needed to investigate the anti-caries potential and clinical performance of conventional orthodontic primer with incorporated nanosilver or microsilver particles.
- 25 March 2015
- Published by Springer Nature in BMC Oral Health
- Vol. 15 (1) , 42
Open AccessEffect on enamel shear bond strength of adding microsilver and nanosilver particles to the primer of an orthodontic adhesive
The objective of this study was to determine whether the addition of microsilver or nanosilver particles to an orthodontic primer affects shear bond strength (SBS) and bracket/adhesive failure. Bovine incisors were randomly divided into six groups with 16 specimens in each: In group 1 (control), brackets were bonded with Transbond™ XT primer. In the experimental groups, microsilver (groups 2 and 3) and nanosilver (groups 4–6) particles of different sizes were added to Transbond XT primer and light cured for 15 seconds [group 2: 0.1% (w/w) microsilver particle size 3.5–18 μm; group 3: 0.3% (w/w) microsilver particle size 3.5–18 μm; group 4: 0.11% (w/w) nanosilver particle size 12.6–18.5 nm; group 5: 0.18% (w/w) nanosilver particle size 12.6–18.5 nm; group 6: 0.33% (w/w) nanosilver particle size 12.6–18.5 nm]. Thereafter, brackets were bonded by light curing the adhesive for 20 seconds. After 24 hours of storage in distilled water at 37°C, SBS was measured with a Zwicki 1120 testing machine. The adhesive remnant index and the prevalence of silver spots on the specimen surface were determined under 10× magnification. Statistical two-way analysis of variance was performed to compare SBS, and a chi-square test was used to compare ARI scores and the prevalence of silver spots. No significant differences in SBS (control: 16.59 ± 6.82 MPa; group 2: 20.6 ± 4.19 MPa; group 3: 16.98 ± 4.84 MPa; group 4: 17.15 ± 5.92 MPa; group 5: 20.09 ± 3.35 MPa; group 6: 16.44 ± 4.51 MPa; p > 0.665) and ARI scores (p = 0.901) were found between the control group and any experimental group. Only experimental groups with nanosilver particles revealed statistically more silver spots on the remaining adhesive. Addition of small concentrations of microsilver or nanosilver particles affects neither SBS nor ARI scores. Addition of nanosilver particles results in silver spots in the remaining primer visible under 10× magnification. Further studies are needed to investigate the anti-caries potential and clinical performance of conventional orthodontic primer with incorporated nanosilver or microsilver particles.
- Open Access
- 20 May 2014
- Published by Springer Nature in Head & Face Medicine
- Vol. 10 (1) , 18
Density of the midpalatal suture after RME treatment – a retrospective comparative low-dose CT-study
Rapid maxillary expansion (RME) is a common technique to improve the dental and skeletal transverse width in cases of constricted maxillary arches. Although retention after RME has been widely examined, there is still no clear statement about the minimal retention time in postpubertal patients and many practitioners have retention concepts varying between three and six months.
- 20 May 2014
- Published by Springer Nature in Head & Face Medicine
- Vol. 10 (1) , 18
Open AccessDensity of the midpalatal suture after RME treatment – a retrospective comparative low-dose CT-study
Rapid maxillary expansion (RME) is a common technique to improve the dental and skeletal transverse width in cases of constricted maxillary arches. Although retention after RME has been widely examined, there is still no clear statement about the minimal retention time in postpubertal patients and many practitioners have retention concepts varying between three and six months.