RLRong-De Lu

Rong-De Lu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rong-De Lu has a total of 19 co-authors. Here are the top co-authors by number of shared publications:

  • Yue Chen

    Physics Experiment Teaching Center, University of Science and Technology of China, Hefei, 230026, China

    6 shared publications
  • Zhao-Xiang Fang

    Physics Experiment Teaching Center, University of Science and Technology of China, Hefei, 230026, China

    6 shared publications
  • Lei Gong

    Department of Optics and Optical Engineering, University of Science and Technology of China, Hefei, 230026, China

    5 shared publications
  • Yu-Xuan Ren

    Fudan University

    5 shared publications
  • Hong-Ze Zhao

    Department of Optics and Optical Engineering, University of Science and Technology of China, Hefei, 230026, China

    3 shared publications
  • Pei Wang

    Department of Optics and Optical Engineering, University of Science and Technology of China, Hefei, 230026, China

    3 shared publications

Latest Publications

  • Open Access

    Author Correction: Accelerating polygon beam with peculiar features

    by Zhao-Xiang Fang, Hong-Ze Zhao, Yue Chen, Rong-De Lu, Li-Qun He, Pei Wang

    An amendment to this paper has been published and can be accessed via a link at the top of the paper.

  • Open Access

    Accelerating polygon beam with peculiar features

    by Zhao-Xiang Fang, Hong-Ze Zhao, Yue Chen, Rong-De Lu, Li-Qun He, Pei Wang

    We report on a novel kind of accelerating beams that follow parabolic paths in free space. In fact, this accelerating peculiar polygon beam (APPB) is induced by the spectral phase symmetrization of the regular polygon beam (RPB) with five intensity beam (RPB) with five intensity peaks, and it preserves a peculiar symmetric structure during propagation. Specially, such beam not only exhibits autofocusing property, but also possesses two types of accelerating intensity maxima, i.e., the cusp and spot-point structure, which does not exist in the previously reported accelerating beams. We also provide a detailed insight into the theoretical origin and characteristics of this spatially accelerating beam through catastrophe theory. Moreover, an experimental scheme based on a digital micromirror device (DMD) with the binary spectral hologram is proposed to generate the target beam by precise modulation, and a longitudinal needle-like focus is observed around the focal region. The experimental results confirm the peculiar features presented in the theoretical findings. Further, the APPB is verified to exhibit self-healing property during propagation with either obstructed cusp or spot intensity maxima point reconstructing after a certain distance. Hence, we believe that the APPB will facilitate the applications in the areas of particle manipulation, material processing and optofludics.


  • Interplay between topological phase and self-acceleration in a vortex symmetric Airy beam

    by Zhao-Xiang Fang, Yue Chen, Yu-Xuan Ren, Lei Gong, Rong-De Lu, An-Qi Zhang, Hong-Ze Zhao, Pei Wang

    Photons in an optical vortex usually carry orbital angular momentum, which boosts the application of the micro-rotation of absorbing particles and quantum information encoding. Such photons propagate along a straight line in free space or follow a curved trace once guided by an optical fiber. Teleportation of an optical vortex using a beam with non-diffraction and self-healing is quite challenging. We demonstrate the manipulation of the propagation trace of an optical vortex with a symmetric Airy beam (SAB) and found that the SAB experiences self-rotation with the implementation of a topological phase structure of coaxial vortex. Slight misalignment of the vortex and the SAB enables the guiding of the vortex into one of the self-accelerating channels. Multiple off-axis vortices embedded in SAB are also demonstrated to follow the trajectory of the major lobe for the SAB beam. The Poynting vector for the beams proves the direction of the energy flow corresponding to the intensity distribution. Hence, we anticipate that the proposed vortex symmetric Airy beam (VSAB) will provide new possibilities for optical manipulation and optical communication.


  • Open Access

    Shaping symmetric Airy beam through binary amplitude modulation for ultralong needle focus

    by Zhao-Xiang Fang, Yu-Xuan Ren, Lei Gong, Pablo Vaveliuk, Yue Chen, Rong-De Lu

    Needle-like electromagnetic fields has various advantages for the applications in high-resolution imaging, Raman Spectroscopy, as well as long-distance optical transportation. The realization of such field often requires high numerical aperture (NA) objective lens and the transmission masks. We demonstrate an ultralong needle-like focus in the optical range produced with an ordinary lens. This is achieved by focusing a symmetric Airy beam (SAB) generated via binary spectral modulation with a digital micromirror device(DMD). Such amplitude modulation technique is able to shape traditional Airy beams, SABs, as well as the dynamic transition modes between the one-dimensional(1D) and two-dimensional (2D) symmetric Airy modes. The created 2D SAB was characterized through measurement of the propagating fields with one of the four main lobes blocked by an opaque mask. The 2D SAB was verified to exhibit self-healing property against propagation with the obstructed major lobe reconstructed after a certain distance. We further produced an elongated focal line by concentrating the SAB via lenses with different NA's, and achieved an ultralong longitudinal needle focus. The produced long needle focus will be applied in optical, chemical, and biological sciences.

  • Digital generation and control of Hermite–Gaussian modes with an amplitude digital micromirror device

    by Yu-Xuan Ren, Zhao-Xiang Fang, Lei Gong, Kun Huang, Yue Chen, Rong-De Lu

    Hermite–Gaussian (HG) mode, as one of the fundamental transverse electromagnetic modes, has significant advantages in various applications including quantum entanglement, guidance of ultracold atoms and particle acceleration, some of which require complex manipulation (such as dynamic creation and arbitrary three-dimensional spatial transformation with challenges) over HG modes. We report the dynamic creation of a transversely rotated HG mode along its propagating axis with the help of a fast amplitude digital micromirror device (DMD) and a binary encoding technique. Furthermore, this mechanism can also realize the dynamic deformation from a traditional HG beam to a vortex HG beam, which provides a deep insight into the detailed formation of optical vortex singularity in a light beam and would benefit across singular optics and optical manipulation.


  • Generation and characterization of a perfect vortex beam with a large topological charge through a digital micromirror device

    by Yue Chen, Zhao-Xiang Fang, Yu-Xuan Ren, Lei Gong, Rong-De Lu

    Optical vortices are associated with a spatial phase singularity. Such a beam with a vortex is valuable in optical microscopy, hyper-entanglement, and optical levitation. In these applications, vortex beams with a perfect circle shape and a large topological charge are highly desirable. But the generation of perfect vortices with high topological charges is challenging. We present a novel method to create perfect vortex beams with large topological charges using a digital micromirror device (DMD) through binary amplitude modulation and a narrow Gaussian approximation. The DMD with binary holograms encoding both the spatial amplitude and the phase could generate fast switchable, reconfigurable optical vortex beams with significantly high quality and fidelity. With either the binary Lee hologram or the superpixel binary encoding technique, we were able to generate the corresponding hologram with high fidelity and create a perfect vortex with topological charge as large as 90. The physical properties of the perfect vortex beam produced were characterized through measurements of propagation dynamics and the focusing fields. The measurements show good consistency with the theoretical simulation. The perfect vortex beam produced satisfies high-demand utilization in optical manipulation and control, momentum transfer, quantum computing, and biophotonics.


  • Open Access

    Ionization model results of ionocraft

    by Ma Chen, Guo Jia, Tang Yuanhui, Lu Rongde, Ye Bangjiao

    An ionocraft is a small instrument that generates net vertical force from electrostatic field. A model of ionization and flow is built to explain this force. The assumption of a threshold field density and the constant charge density is applied to simplify the flow model. With these assumptions, corresponding simulation results and comparison with experimental data, we have shown that this model is sufficient to explain the force on the ionocraft.

  • Microscopic lithography with pixelate diffraction of a digital micro-mirror device for micro-lens fabrication

    by Xiang-Yu Ding, Yu-Xuan Ren, Lei Gong, Zhao-Xiang Fang, Rong-De Lu

    The irradiance in microscopic lithography using a digital micro-mirror device (DMD) as a virtual digital mask generator is influenced by diffraction effects that have been exploited to fabricate microstructures. Based on the established model, the theoretical analysis and simulation of DMD diffraction characteristics has been studied. A novel method without masking to fabricate a micro-lens by pixilation of micro-mirrors inside the DMDs used in microscopic lithography has been proposed. It is a method of precise control of photon-induced curing behavior of photoresist by full use of diffraction effects and verification of the feasibility of the fabrication method based on diffraction. The introduced method provides an option for accurate and flexible micro-fabrication of microstructures.