Olivier Gavard
Research Subjects
Olivier Gavard has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Marie-Joëlle Menu
CIRIMAT Univ. Toulouse, Toulouse INP, CNRS Toulouse France
2 shared publications - Robin Montpellaz
Amphenol Socapex, 948 Promenade de l’Arve, BP 29, 74300 Thyez, France
2 shared publications - Clément Genet
CIRIMAT, Université de Toulouse, CNRS INPT UPS, UMR 5085, 118 Route de Narbonne, 31062 Toulouse CEDEX 09, France
1 shared publication - Clément Genet
Centre Interuniversitaire de Recherche et d’Ingénierie des Matériaux (CIRIMAT), Université Toulouse 3 Paul Sabatier, Toulouse INP, CNRS, Université de Toulouse, 118 Route de Narbonne, 31062 Toulouse cedex 9, France
1 shared publication - Edouard Bréniaux
Centre Interuniversitaire de Recherche et d’Ingénierie des Matériaux (CIRIMAT), Université Toulouse 3 Paul Sabatier, Toulouse INP, CNRS, Université de Toulouse, 118 Route de Narbonne, 31062 Toulouse cedex 9, France
1 shared publication - Florence Ansart
CIRIMAT, Université de Toulouse, CNRS INPT UPS, UMR 5085, 118 Route de Narbonne, 31062 Toulouse CEDEX 09, France
1 shared publication
Latest Publications
- Open Access
Multifunctional Sol–Gel Coatings for Both Anticorrosion and Electrical Conduction Properties
This work is part of a current and essential issue aiming to find a solution for the replacement of chromium(VI) and cadmium in the surface treatment process applied to electrical connectors. The application of a protective coating obtained by the sol–gel route proves to be an interesting alternative method and numerous studies describe efficient anticorrosion coatings to protect various metallic alloys. The issue of electrical connectors made of 6061 alloy is to combine anticorrosion protection and electrical conduction, which are antagonistic properties, so multifunctional sol–gel coatings and/or architectures have to be synthesized and shaped on connectors. In this work, several experimental parameters, such as the type of carbon filler, the hydrolysis ratio, the precursors’ introduction order are studied and evaluated to achieve industrial requirements. Thus, aqueous suspensions of carbon fillers have been introduced into sol–gel formulations to give rise to conductive coatings (200–500 mΩ□) with high anticorrosion properties (500 h NSS resistance), in which thickness is less than 10 microns. The incorporation of organic additives poly(2-ethyl-2-oxazoline) or hydroxypropylmethylcellulose positively impacts the flash point of the sol (>60 °C) making the sol–gel process compatible with the HSE recommendation and the ATEX standard.
Open AccessMultifunctional Sol–Gel Coatings for Both Anticorrosion and Electrical Conduction Properties
This work is part of a current and essential issue aiming to find a solution for the replacement of chromium(VI) and cadmium in the surface treatment process applied to electrical connectors. The application of a protective coating obtained by the sol–gel route proves to be an interesting alternative method and numerous studies describe efficient anticorrosion coatings to protect various metallic alloys. The issue of electrical connectors made of 6061 alloy is to combine anticorrosion protection and electrical conduction, which are antagonistic properties, so multifunctional sol–gel coatings and/or architectures have to be synthesized and shaped on connectors. In this work, several experimental parameters, such as the type of carbon filler, the hydrolysis ratio, the precursors’ introduction order are studied and evaluated to achieve industrial requirements. Thus, aqueous suspensions of carbon fillers have been introduced into sol–gel formulations to give rise to conductive coatings (200–500 mΩ□) with high anticorrosion properties (500 h NSS resistance), in which thickness is less than 10 microns. The incorporation of organic additives poly(2-ethyl-2-oxazoline) or hydroxypropylmethylcellulose positively impacts the flash point of the sol (>60 °C) making the sol–gel process compatible with the HSE recommendation and the ATEX standard.
- Open Access
Innovative Formulation Combining Al, Zr and Si Precursors to Obtain Anticorrosion Hybrid Sol-Gel Coating
The aim of our study is to improve the aluminium alloy corrosion resistance with Organic-Inorganic Hybrid (OIH) sol-gel coating. Coatings are obtained from unusual formulation with precursors mixing: glycidoxypropyltrimethoxysilane (GPTMS), zirconium (IV) propoxide (TPOZ) and aluminium tri-sec-butoxide (ASB). This formulation was characterized and compared with sol formulations GPTMS/TPOZ and GPTMS/ASB. In each formulation, a corrosion inhibitor, cerium (III) nitrate hexahydrate, is employed to improve the corrosion performance. Coatings obtained from sol based on GPTMS/TPOZ/ASB have good anti-corrosion performances with Natural Salt Spray (NSS) resistance of 500 h for a thickness lower than 4 µm. Contact angle measurement showed a coating hydrophobic behaviour. To understand these performances, nuclear magnetic resonance (NMR) analyses were performed, results make sol-gel coating condensation evident and are in very good agreement with previous results.
Open AccessInnovative Formulation Combining Al, Zr and Si Precursors to Obtain Anticorrosion Hybrid Sol-Gel Coating
The aim of our study is to improve the aluminium alloy corrosion resistance with Organic-Inorganic Hybrid (OIH) sol-gel coating. Coatings are obtained from unusual formulation with precursors mixing: glycidoxypropyltrimethoxysilane (GPTMS), zirconium (IV) propoxide (TPOZ) and aluminium tri-sec-butoxide (ASB). This formulation was characterized and compared with sol formulations GPTMS/TPOZ and GPTMS/ASB. In each formulation, a corrosion inhibitor, cerium (III) nitrate hexahydrate, is employed to improve the corrosion performance. Coatings obtained from sol based on GPTMS/TPOZ/ASB have good anti-corrosion performances with Natural Salt Spray (NSS) resistance of 500 h for a thickness lower than 4 µm. Contact angle measurement showed a coating hydrophobic behaviour. To understand these performances, nuclear magnetic resonance (NMR) analyses were performed, results make sol-gel coating condensation evident and are in very good agreement with previous results.