Keolebogile Shirley Motaung
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Keolebogile Shirley Motaung has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Cornelius Cano Ssemakalu
Vaal University of Technology
5 shared publications - Mapula Razwinani
Durban University of Technology, South Africa
4 shared publications - Franca Nneka Alaribe
Department of Biomedical Sciences, Faculty of Science, Tshwane University of Technology, Pretoria, South Africa
3 shared publications - Makwese Maepa
Faculty of Science, Department of Biomedical Sciences, Tshwane University of Technology, Pretoria, South Africa
3 shared publications - Michael Pillay
Department of Life and Consumer Sciences, College of Agriculture and Environmental Sciences, Florida Campus, University of South Africa, Johannesburg 1709, South Africa
3 shared publications - Blessing Atim Aderibigbe
Department of Chemistry, Alice Campus, University of Fort Hare, Alice 5700, South Africa
2 shared publications
Latest Publications
- Open Access
- 5 March 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (9)
Antioxidant and Antimicrobial Activities of Green‐Synthesized Silver Nanoparticles Using a Cocktail Aqueous Extract of Capparis sepiaria Root and Tabernaemontana elegans Bark
The increasing incidence of antimicrobial resistance (AMR) poses a serious threat to public health, which necessitates the development of alternative countermeasures to combat it. Green nanotechnology, in particular the use of silver nanoparticles (AgNPs), shows promise in combating AMR. Although the synthesis of AgNPs using medicinal plant extracts has been explored, combining extracts from two medicinal plants to synthesize AgNPs with enhanced properties has received less attention. Therefore, this study addresses this gap by presenting the green synthesis of AgNPs using a cocktail of Capparis sepiaria – Tabernaemontana elegans (CsTe) aqueous extract as reducing, stabilizing, and capping agents. The focus is on assessing the antioxidant and antimicrobial activities of the synthesized CsTe‐AgNPs. Various parameters, such as pH, temperature, extract and silver concentrations, reaction ratio, and synthesis time, were optimized to enhance the efficiency of CsTe‐AgNPs synthesis. The CsTe‐AgNPs were monodispersed and spherical, with an average core size of 14 ± 2.953 and 7 ± 3.849 nm, and hydrodynamic size of 23 ± 12.260 and 138 ± 2.086 nm for pH = 6 and pH = 11, respectively. The FTIR analysis revealed a shift in peaks of biomolecules present in the CsTe extracts that could be responsible for the reduction of Ag salt to form CsTe‐AgNPs. Notably, CsTe‐AgNPs_pH11 had potent antimicrobial activity, with a minimum inhibitory concentration (MIC) of 12.5 ± 0 µg/mL against K. pneumoniae and P. aeruginosa , and a slightly higher MIC for C. albicans of 25 ± 5.449 µg/mL. This study demonstrated the effectiveness of using a mixture of two extracts to synthesize AgNPs with enhanced antioxidant and antimicrobial activities, and therefore, could serve as a promising reagent to combat AMR.
- 5 March 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (9)
Open AccessAntioxidant and Antimicrobial Activities of Green‐Synthesized Silver Nanoparticles Using a Cocktail Aqueous Extract of Capparis sepiaria Root and Tabernaemontana elegans Bark
The increasing incidence of antimicrobial resistance (AMR) poses a serious threat to public health, which necessitates the development of alternative countermeasures to combat it. Green nanotechnology, in particular the use of silver nanoparticles (AgNPs), shows promise in combating AMR. Although the synthesis of AgNPs using medicinal plant extracts has been explored, combining extracts from two medicinal plants to synthesize AgNPs with enhanced properties has received less attention. Therefore, this study addresses this gap by presenting the green synthesis of AgNPs using a cocktail of Capparis sepiaria – Tabernaemontana elegans (CsTe) aqueous extract as reducing, stabilizing, and capping agents. The focus is on assessing the antioxidant and antimicrobial activities of the synthesized CsTe‐AgNPs. Various parameters, such as pH, temperature, extract and silver concentrations, reaction ratio, and synthesis time, were optimized to enhance the efficiency of CsTe‐AgNPs synthesis. The CsTe‐AgNPs were monodispersed and spherical, with an average core size of 14 ± 2.953 and 7 ± 3.849 nm, and hydrodynamic size of 23 ± 12.260 and 138 ± 2.086 nm for pH = 6 and pH = 11, respectively. The FTIR analysis revealed a shift in peaks of biomolecules present in the CsTe extracts that could be responsible for the reduction of Ag salt to form CsTe‐AgNPs. Notably, CsTe‐AgNPs_pH11 had potent antimicrobial activity, with a minimum inhibitory concentration (MIC) of 12.5 ± 0 µg/mL against K. pneumoniae and P. aeruginosa , and a slightly higher MIC for C. albicans of 25 ± 5.449 µg/mL. This study demonstrated the effectiveness of using a mixture of two extracts to synthesize AgNPs with enhanced antioxidant and antimicrobial activities, and therefore, could serve as a promising reagent to combat AMR.
- Open Access
- 20 January 2025
- Published by MDPI AG in Preprints.org
Chondrocyte Secretion of NO, ROS, GAG and PGE2 in Surface and Middle Porcine Articular Cartilage Is Altered by Aqueous Seed Extract of Bambara Groundnut (Vigna subterranea L. Vedc.)
In Africa, Bambara groundnut (BG) (Vigna subterranea L. Verdc.) is used both as a food legume and a medicinal plant. Traditional healers used the seeds of Bambara groundnut for treating diarrhoea, impotency, colon cancer, nausea, vomiting, malignancies, and inflammations caused by osteoarthritis. In humans, the proinflammatory cytokine, interleukin-1β (IL-1β), plays a major role in the aetiology of osteoarthritis as it induces the release of catabolic factors that contribute to cartilage degradation. The aim of this study was to evaluate the protective effects of lyophilised aqueous extract of BG on porcine articular chondrocytes, following cell stimulation with proinflammatory cytokine IL-1β (10 ng/ml) and addition of different concentrations of BG aqueous seed extract (12.5, 50 and 200 µg/ml) or quercetin (12.5, 50 and 200 µg/ml) as antioxidant. Measurement of nitric oxide (NO), reactive oxygen species (ROS) and prostaglandins (PGE2) using ELISA, fluorescent probe 2´-7´-dichlorodihydrofluorescin diacetate (DCFH-DA) and Griess reagent respectively showed that BG extract decreased the stable free radical DPPH in both the middle zone and surface zone chondrocyte cells, and inhibited the IL-1β-induced production of NO and ROS, which have harmful effects on porcine articular chondrocytes. However, the level of glycosaminoglycans (GAG) rose relative to the pure IL-1β treatment 72 h after the addition of BG crude extract or quercetin. These results suggest that BG crude extract has chondroprotective effect which can safeguard cells against inflammation during osteoarthritis and other inflammatory disorders.
- 20 January 2025
- Published by MDPI AG in Preprints.org
Open AccessChondrocyte Secretion of NO, ROS, GAG and PGE2 in Surface and Middle Porcine Articular Cartilage Is Altered by Aqueous Seed Extract of Bambara Groundnut (Vigna subterranea L. Vedc.)
In Africa, Bambara groundnut (BG) (Vigna subterranea L. Verdc.) is used both as a food legume and a medicinal plant. Traditional healers used the seeds of Bambara groundnut for treating diarrhoea, impotency, colon cancer, nausea, vomiting, malignancies, and inflammations caused by osteoarthritis. In humans, the proinflammatory cytokine, interleukin-1β (IL-1β), plays a major role in the aetiology of osteoarthritis as it induces the release of catabolic factors that contribute to cartilage degradation. The aim of this study was to evaluate the protective effects of lyophilised aqueous extract of BG on porcine articular chondrocytes, following cell stimulation with proinflammatory cytokine IL-1β (10 ng/ml) and addition of different concentrations of BG aqueous seed extract (12.5, 50 and 200 µg/ml) or quercetin (12.5, 50 and 200 µg/ml) as antioxidant. Measurement of nitric oxide (NO), reactive oxygen species (ROS) and prostaglandins (PGE2) using ELISA, fluorescent probe 2´-7´-dichlorodihydrofluorescin diacetate (DCFH-DA) and Griess reagent respectively showed that BG extract decreased the stable free radical DPPH in both the middle zone and surface zone chondrocyte cells, and inhibited the IL-1β-induced production of NO and ROS, which have harmful effects on porcine articular chondrocytes. However, the level of glycosaminoglycans (GAG) rose relative to the pure IL-1β treatment 72 h after the addition of BG crude extract or quercetin. These results suggest that BG crude extract has chondroprotective effect which can safeguard cells against inflammation during osteoarthritis and other inflammatory disorders.
- Open Access
- 1 January 2025
- Published by Durban University of Technology in African Journal of Inter/Multidisciplinary Studies
- Vol. 7 (1) , 1-17
The Inclusion of Design Thinking as a Tool for Entrepreneurship at the Durban University of Technology
The volatile nature of the entrepreneurship environment requires specific characteristics from individuals entering the field. These traits can be developed through entrepreneurial learning, utilising a method- and design-based approach known as design thinking (DT). Design Thinking prioritises the entrepreneurial process, particularly the mindset and skills of student entrepreneurs. It also encourages student-centred learning by ensuring that the acquired skills are applicable to real-life situations. The study evaluated the inclusion of DT as an entrepreneurship and business development tool at the Durban University of Technology. Entrepreneurial learning through a design-based and method approach was conceptualised. A quantitative research approach was used, focussed on students who have either enrolled in entrepreneurship modules that follow the DT approach or in courses that do not follow the DT approach, for comparative purposes. The collection of data was done using a semi-structured questionnaire. Thereafter, SPSS version 24 was used to analyse the collected data. The study results showed a lack of awareness concerning DT, and that most participants have not enrolled in DT boot camps or workshops. This lack is evident in the limited number of ventures undertaken by participants. In conclusion, an intervention is recommended which will allow the incorporation of DT into the Higher Education Institution curriculum to foster innovation and the execution of novel ideas.
- 1 January 2025
- Published by Durban University of Technology in African Journal of Inter/Multidisciplinary Studies
- Vol. 7 (1) , 1-17
Open AccessThe Inclusion of Design Thinking as a Tool for Entrepreneurship at the Durban University of Technology
The volatile nature of the entrepreneurship environment requires specific characteristics from individuals entering the field. These traits can be developed through entrepreneurial learning, utilising a method- and design-based approach known as design thinking (DT). Design Thinking prioritises the entrepreneurial process, particularly the mindset and skills of student entrepreneurs. It also encourages student-centred learning by ensuring that the acquired skills are applicable to real-life situations. The study evaluated the inclusion of DT as an entrepreneurship and business development tool at the Durban University of Technology. Entrepreneurial learning through a design-based and method approach was conceptualised. A quantitative research approach was used, focussed on students who have either enrolled in entrepreneurship modules that follow the DT approach or in courses that do not follow the DT approach, for comparative purposes. The collection of data was done using a semi-structured questionnaire. Thereafter, SPSS version 24 was used to analyse the collected data. The study results showed a lack of awareness concerning DT, and that most participants have not enrolled in DT boot camps or workshops. This lack is evident in the limited number of ventures undertaken by participants. In conclusion, an intervention is recommended which will allow the incorporation of DT into the Higher Education Institution curriculum to foster innovation and the execution of novel ideas.
- Open Access
- 1 January 2025
- Published by AOSIS in Journal of Medicinal Plants for Economic Development
- Vol. 9 (1) , 7
Impact of phytochemical-based hydrocolloid dressings on wound healing: A comparative review
Background: Wound healing is an important occurrence consisting of a myriad biochemical processes. The recent introduction of phytochemical-based dressings to expedite wound healing uses a multi-targeted approach including antimicrobial, anti-inflammatory and antioxidant activity. Aim: The review aimed to conduct an exhaustive search of the existing literature on plant-based hydrocolloid dressings for wound healing and to evaluate the dressing efficacy in comparison to standard dressings. Setting: The review offers a worldwide overview of plant-based hydrocolloid dressings and their use. Methods: A systematic search using keywords was done to identify clinical and randomised control trials from 2019 to 2024. The following databases were queried: Cochrane Library, Embase, PubMed, Scopus, Science Direct and Web of Science. Data appraisal was done by an analysis of the data quality by the authors. Results: Of a total of 866 records identified, 4 qualified for further assessment. The data retrieved showed that the use of phytochemical-based hydrocolloids is more effective compared to non-plant-based hydrocolloids. Conclusion: The data analysis revealed that there are few research studies on plant-based hydrocolloids, and there is a need for further research in the area. In addition, the dressings significantly expedite wound healing offering a multifaceted approach because of the different mechanisms of action including antioxidant, anti-inflammatory and cell proliferation. Contribution: This study highlights the need for further studies on hydrocolloids produced from plant extracts for effective wound healing.
- 1 January 2025
- Published by AOSIS in Journal of Medicinal Plants for Economic Development
- Vol. 9 (1) , 7
Open AccessImpact of phytochemical-based hydrocolloid dressings on wound healing: A comparative review
Background: Wound healing is an important occurrence consisting of a myriad biochemical processes. The recent introduction of phytochemical-based dressings to expedite wound healing uses a multi-targeted approach including antimicrobial, anti-inflammatory and antioxidant activity. Aim: The review aimed to conduct an exhaustive search of the existing literature on plant-based hydrocolloid dressings for wound healing and to evaluate the dressing efficacy in comparison to standard dressings. Setting: The review offers a worldwide overview of plant-based hydrocolloid dressings and their use. Methods: A systematic search using keywords was done to identify clinical and randomised control trials from 2019 to 2024. The following databases were queried: Cochrane Library, Embase, PubMed, Scopus, Science Direct and Web of Science. Data appraisal was done by an analysis of the data quality by the authors. Results: Of a total of 866 records identified, 4 qualified for further assessment. The data retrieved showed that the use of phytochemical-based hydrocolloids is more effective compared to non-plant-based hydrocolloids. Conclusion: The data analysis revealed that there are few research studies on plant-based hydrocolloids, and there is a need for further research in the area. In addition, the dressings significantly expedite wound healing offering a multifaceted approach because of the different mechanisms of action including antioxidant, anti-inflammatory and cell proliferation. Contribution: This study highlights the need for further studies on hydrocolloids produced from plant extracts for effective wound healing.
- 12 November 2024
- Published by Taylor & Francis in Therapeutic Delivery
- Vol. 15 (12) , 921-937
Sodium alginate/carboxymethylcellulose gel formulations containing Capparis sepieria plant extract for wound healing
Aim: Using appropriate wound dressings is crucial when treating burn wounds to promote accelerated healing.Materials & methods: Sodium alginate (SA)-based gels containing Carboxymethyl cellulose (CMC) and Pluronic F127 were prepared. The formulations. SA/CMC/Carbopol and SA/CMC/PluronicF127 were loaded with aqueous root extract of Capparis sepiaria. The formulations were characterized using appropriate techniques.Results: The gels' viscosity was in the range of 676.33 ± 121.76 to 20.00 ± 9.78 cP and in vitro whole blood kinetics showed their capability to induce a faster clotting rate. They also supported high cell viability of 80% with cellular migration and proliferation. Their antibacterial activity was significant against most bacteria strains used in the study.Conclusion: The gels' distinct features reveal their potential application as wound dressings for burn wounds.
- 12 November 2024
- Published by Taylor & Francis in Therapeutic Delivery
- Vol. 15 (12) , 921-937
Sodium alginate/carboxymethylcellulose gel formulations containing Capparis sepieria plant extract for wound healing
Aim: Using appropriate wound dressings is crucial when treating burn wounds to promote accelerated healing.Materials & methods: Sodium alginate (SA)-based gels containing Carboxymethyl cellulose (CMC) and Pluronic F127 were prepared. The formulations. SA/CMC/Carbopol and SA/CMC/PluronicF127 were loaded with aqueous root extract of Capparis sepiaria. The formulations were characterized using appropriate techniques.Results: The gels' viscosity was in the range of 676.33 ± 121.76 to 20.00 ± 9.78 cP and in vitro whole blood kinetics showed their capability to induce a faster clotting rate. They also supported high cell viability of 80% with cellular migration and proliferation. Their antibacterial activity was significant against most bacteria strains used in the study.Conclusion: The gels' distinct features reveal their potential application as wound dressings for burn wounds.
- Open Access
- 22 July 2024
- Published by Taylor & Francis in Journal of Biomaterials Science, Polymer Edition
- Vol. 35 (15) , 2380-2401
Sodium alginate-based nanofibers loaded with Capparis Sepiaria plant extract for wound healing
Burn wounds are associated with infections, drug resistance, allergic reactions, odour, bleeding, excess exudates, and scars, requiring prolonged hospital stay. It is crucial to develop wound dressings that can effectively combat allergic reactions and drug resistance, inhibit infections, and absorb excess exudates to accelerate wound healing. To overcome the above-mentioned problems associated with burn wounds, SA/PVA/PLGA/Capparis sepiaria and SA/PVA/Capparis sepiaria nanofibers incorporated with Capparis sepiaria plant extract were prepared using an electrospinning technique. Fourier-transform infrared spectroscopy confirmed the successful incorporation of the extract into the nanofibers without any interaction between the extract and the polymers. The nanofibers displayed porous morphology and a rough surface suitable for cellular adhesion and proliferation. SA/PVA/PLGA/Capparis sepiaria and SA/PVA/Capparis sepiaria nanofibers demonstrated significant antibacterial effects against wound infection-associated bacterial strains: Pseudomonas aeruginosa, Enterococcus faecalis, Mycobaterium smegmatis, Escherichia coli, Enterobacter cloacae, Proteus vulgaris, and Staphylococcus aureus. Cytocompatibility studies using HaCaT cells revealed the non-toxicity of the nanofibers. SA/PVA/PLGA/Capparis sepiaria and SA/PVA/Capparis sepiaria nanofibers exhibited hemostatic properties, resulting from the synergistic effect of the plant extract and polymers. The in vitro scratch wound healing assay showed that the SA/PVA/Capparis sepiaria nanofiber wound-healing capability is more than the plant extract and a commercially available wound dressing. The wound-healing potential of SA/PVA/Capparis sepiaria nanofiber is attributed to the synergistic effect of the phytochemicals present in the extract, their porosity, and the ECM-mimicking structure of the nanofibers. The findings suggest that the electrospun nanofibers loaded with Capparis sepiaria extract are promising wound dressings that should be explored for burn wounds.
- 22 July 2024
- Published by Taylor & Francis in Journal of Biomaterials Science, Polymer Edition
- Vol. 35 (15) , 2380-2401
Open AccessSodium alginate-based nanofibers loaded with Capparis Sepiaria plant extract for wound healing
Burn wounds are associated with infections, drug resistance, allergic reactions, odour, bleeding, excess exudates, and scars, requiring prolonged hospital stay. It is crucial to develop wound dressings that can effectively combat allergic reactions and drug resistance, inhibit infections, and absorb excess exudates to accelerate wound healing. To overcome the above-mentioned problems associated with burn wounds, SA/PVA/PLGA/Capparis sepiaria and SA/PVA/Capparis sepiaria nanofibers incorporated with Capparis sepiaria plant extract were prepared using an electrospinning technique. Fourier-transform infrared spectroscopy confirmed the successful incorporation of the extract into the nanofibers without any interaction between the extract and the polymers. The nanofibers displayed porous morphology and a rough surface suitable for cellular adhesion and proliferation. SA/PVA/PLGA/Capparis sepiaria and SA/PVA/Capparis sepiaria nanofibers demonstrated significant antibacterial effects against wound infection-associated bacterial strains: Pseudomonas aeruginosa, Enterococcus faecalis, Mycobaterium smegmatis, Escherichia coli, Enterobacter cloacae, Proteus vulgaris, and Staphylococcus aureus. Cytocompatibility studies using HaCaT cells revealed the non-toxicity of the nanofibers. SA/PVA/PLGA/Capparis sepiaria and SA/PVA/Capparis sepiaria nanofibers exhibited hemostatic properties, resulting from the synergistic effect of the plant extract and polymers. The in vitro scratch wound healing assay showed that the SA/PVA/Capparis sepiaria nanofiber wound-healing capability is more than the plant extract and a commercially available wound dressing. The wound-healing potential of SA/PVA/Capparis sepiaria nanofiber is attributed to the synergistic effect of the phytochemicals present in the extract, their porosity, and the ECM-mimicking structure of the nanofibers. The findings suggest that the electrospun nanofibers loaded with Capparis sepiaria extract are promising wound dressings that should be explored for burn wounds.
- 1 January 2024
- Published by Durban University of Technology in African Journal of Inter/Multidisciplinary Studies
- Vol. 6 (1) , 1-10
Benefits and Challenges of Research Commercialisation in South Africa: A Systemic Review
In developing countries, there is an increased emphasis on encouraging the commercialisation of research at universities. This triggers universities to adopt a culture of innovation and technological learning at both undergraduate and postgraduate levels. The focus of this review article is to highlight the benefits and challenges faced by researchers in the field of synthetic biology products, biotechnology, agribusiness, Biofuels and phytomedicine in commercialisation. The methodological approach was informed by a selection of electronic databases with a high chance of the selected field in relation to the commercialisation of the research outputs. Google Scholar, PubMed, and Higher Education and Science Technology South Africa Reports for entrepreneurial universities were searched, focusing on 2007 to 2023. The years proved to have played a role in furthering discussions and policy in research on commercialisation in South Africa, the benefits of research commercialisation, challenges of research commercialisation, its determinants, and its impact on academics, universities, and other stakeholders. The review findings suggest that the commercialisation of research is a challenging and complex task to execute, as there are very few cases in South Africa to have a successful academic intellectual property creation, licensing, academic entrepreneurship, and start-up of research. This is placed into context by the fact that the market for high-end products and processes is highly uncertain.
- 1 January 2024
- Published by Durban University of Technology in African Journal of Inter/Multidisciplinary Studies
- Vol. 6 (1) , 1-10
Benefits and Challenges of Research Commercialisation in South Africa: A Systemic Review
In developing countries, there is an increased emphasis on encouraging the commercialisation of research at universities. This triggers universities to adopt a culture of innovation and technological learning at both undergraduate and postgraduate levels. The focus of this review article is to highlight the benefits and challenges faced by researchers in the field of synthetic biology products, biotechnology, agribusiness, Biofuels and phytomedicine in commercialisation. The methodological approach was informed by a selection of electronic databases with a high chance of the selected field in relation to the commercialisation of the research outputs. Google Scholar, PubMed, and Higher Education and Science Technology South Africa Reports for entrepreneurial universities were searched, focusing on 2007 to 2023. The years proved to have played a role in furthering discussions and policy in research on commercialisation in South Africa, the benefits of research commercialisation, challenges of research commercialisation, its determinants, and its impact on academics, universities, and other stakeholders. The review findings suggest that the commercialisation of research is a challenging and complex task to execute, as there are very few cases in South Africa to have a successful academic intellectual property creation, licensing, academic entrepreneurship, and start-up of research. This is placed into context by the fact that the market for high-end products and processes is highly uncertain.
- Open Access
- 18 September 2019
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 20 (18) , 4628
Recent Trends in Decellularized Extracellular Matrix Bioinks for 3D Printing: An Updated Review
The promise of regenerative medicine and tissue engineering is founded on the ability to regenerate diseased or damaged tissues and organs into functional tissues and organs or the creation of new tissues and organs altogether. In theory, damaged and diseased tissues and organs can be regenerated or created using different configurations and combinations of extracellular matrix (ECM), cells, and inductive biomolecules. Regenerative medicine and tissue engineering can allow the improvement of patients’ quality of life through availing novel treatment options. The coupling of regenerative medicine and tissue engineering with 3D printing, big data, and computational algorithms is revolutionizing the treatment of patients in a huge way. 3D bioprinting allows the proper placement of cells and ECMs, allowing the recapitulation of native microenvironments of tissues and organs. 3D bioprinting utilizes different bioinks made up of different formulations of ECM/biomaterials, biomolecules, and even cells. The choice of the bioink used during 3D bioprinting is very important as properties such as printability, compatibility, and physical strength influence the final construct printed. The extracellular matrix (ECM) provides both physical and mechanical microenvironment needed by cells to survive and proliferate. Decellularized ECM bioink contains biochemical cues from the original native ECM and also the right proportions of ECM proteins. Different techniques and characterization methods are used to derive bioinks from several tissues and organs and to evaluate their quality. This review discusses the uses of decellularized ECM bioinks and argues that they represent the most biomimetic bioinks available. In addition, we briefly discuss some polymer-based bioinks utilized in 3D bioprinting.
- 18 September 2019
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 20 (18) , 4628
Open AccessRecent Trends in Decellularized Extracellular Matrix Bioinks for 3D Printing: An Updated Review
The promise of regenerative medicine and tissue engineering is founded on the ability to regenerate diseased or damaged tissues and organs into functional tissues and organs or the creation of new tissues and organs altogether. In theory, damaged and diseased tissues and organs can be regenerated or created using different configurations and combinations of extracellular matrix (ECM), cells, and inductive biomolecules. Regenerative medicine and tissue engineering can allow the improvement of patients’ quality of life through availing novel treatment options. The coupling of regenerative medicine and tissue engineering with 3D printing, big data, and computational algorithms is revolutionizing the treatment of patients in a huge way. 3D bioprinting allows the proper placement of cells and ECMs, allowing the recapitulation of native microenvironments of tissues and organs. 3D bioprinting utilizes different bioinks made up of different formulations of ECM/biomaterials, biomolecules, and even cells. The choice of the bioink used during 3D bioprinting is very important as properties such as printability, compatibility, and physical strength influence the final construct printed. The extracellular matrix (ECM) provides both physical and mechanical microenvironment needed by cells to survive and proliferate. Decellularized ECM bioink contains biochemical cues from the original native ECM and also the right proportions of ECM proteins. Different techniques and characterization methods are used to derive bioinks from several tissues and organs and to evaluate their quality. This review discusses the uses of decellularized ECM bioinks and argues that they represent the most biomimetic bioinks available. In addition, we briefly discuss some polymer-based bioinks utilized in 3D bioprinting.