JLJunru Li

Junru Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Junru Li has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Deep Eutectic Solvent Assisted Mechano-Enzymatic Preparation for Reprocessable Hot-Melting Starch: A Comprehensive Analysis of Molecular Structure and Thermal Properties

    by Xuan Liu, Jia Man, Yanhui Li, Liming Wang, Maocheng Ji, Sixian Peng, Junru Li, Shen Wang, Fangyi Li, Chuanwei Zhang

    Unlike the hot-melting processing of thermoplastic plastics, the processing of starch-based material relies on the addition of solvents, resulting in their low productivity, hindering large-scale industrialized production. A strategy to realize the high production efficiency of starch-based material, an environmentally friendly modification process without waste liquid generation, was designed to prepare a hot-melting starch (HMS) that can be repeatedly hot melted. Ball milling, enzymatic digestion, and deep eutectic solvent (DES) plasticization modification were combined to prepare the HMS. Ball milling destroyed the starch’s particles and the crystallinity, exposing the hydroxyl group, which allowed amylase to achieve enzymatic hydrolysis more easily. After enzymatic hydrolysis, the molecular chains of modified starch were shortened and the entanglement of molecular chains was reduced, which promoted the slip of molecular chains. The plasticization of DES, which promoted by the broken starch particles and the destroyed crystal structure, formed stronger hydrogen bonds and facilitated hot melting. Furthermore, due to the excellent hot-melting properties, HMS can be combined with sisal fiber and polycaprolactone (PCL) under solvent-free conditions. The tensile strength of HMS/sisal fiber/PCL was increased by 109%; meanwhile, the water contact angle was stabilized at 104°, when the blending ratio of hot-melting starch was 67.5% compared with HMS.


  • Open Access

    Study on the relationship between process organization and properties of 45MnVS non-tempered steel

    by Xu Yuan, Xin-Qing Yan, Jun-Ru Li, Zong-Qiang Liu

    The microstructure, mechanical properties, and heat treatment process relationships of 45MnVS non-tempered steel were investigated. Different grain sizes and tissue ratios were obtained after heating and holding at 950, 1050, and 1150 °C for 30 min, respectively, and cooling at different cooling conditions and cooling rates. As the austenitizing temperature increased, the grain size and the elongation and section shrinkage of the experimental steels decreased. At the same time, the content of ferrite and pearlite in the tissue gradually decreases, the content of sorbite and troostite rises, and the strength and hardness of the experimental steel increase. With the increase of cold speed, ferrite’s content decreases, sorbite and troostite’s content increases, and strength and hardness increase. The original austenite grain size also influences the tissue ratio. As the austenite grain refines, the ferrite transformation temperature increases during cooling and the ferrite content in the tissue rises after cooling.


  • A highly efficient In2S3/Ag2S/TiO2 NTAs photoelectrodes for photocathodic protection of Q235 carbon steel under visible light

    by Hong Li, Zhanyuan Yang, Xingqiang Cui, Yanhui Li, Pengfei Zhang, Junru Li

    A novel In2S3/Ag2S/TiO2 nanotube arrays (NTAs) was successfully fabricated by successive ionic layer adsorption and reaction method and electrochemical anodic oxidation method, and served as photoanode for photocathodic protection application. The micromorphologies, optical absorption properties, crystalline structure and elemental valence states of the composites were performed by field emission scanning electron microscopy, high resolution transmission electron microscope, UV–vis diffuse reflectance absorption spectra, x-ray diffractometer and x-ray photoelectron spectroscopy, respectively. The photocathodic protection performances of In2S3/Ag2S/TiO2 NTAs on the Q235 carbon steel (CS) were also studied. The In2S3/Ag2S/TiO2 nanocomposites show better photoelectrocatalytic and photocathodic protection performance than pure TiO2 NTAs. The photocurrent density of In2S3(9)/Ag2S(8)/TiO2 photoelectrode coupled with Q235 CS reach 211 μA cm−2, which is about 4.5 times higher than that of TiO2 NTAs. The photogenerated potential of Q235 CS coupled to In2S3(9)/Ag2S(8)/TiO2 under illumination shows a negative shift to −0.92 V versus SCE. Results indicate that the co-sensitization of In2S3 and Ag2S could extend the light absorption of TiO2 to the visible light range and enhance its photoelectric conversion efficiency.


  • Open Access

    Highly Efficient CuInSe2 Sensitized TiO2 Nanotube Films for Photocathodic Protection of 316 Stainless Steel

    by Zhanyuan Yang, Hong Li, Xingqiang Cui, Jinke Zhu, Yanhui Li, Pengfei Zhang, Junru Li

    CuInSe2 nanoparticles were successfully deposited on the surface of TiO2 nanotube arrays (NTAs) by a solvothermal method for the photocathodic protection (PCP) of metals. Compared with TiO2 NTAs, the CuInSe2/TiO2 composites exhibited stronger visible light absorption and higher photoelectric conversion efficiency. After 316 Stainless Steel (SS) was coupled with CuInSe2/TiO2, the potential of 316 SS could drop to −0.90 V. The photocurrent density of CuInSe2/TiO2 connected to 316 SS reached 140 μA cm−2, which was four times that of TiO2 NTAs. The composites exhibited a protective effect in the dark state for more than 8 h after 4 h of visible light illumination. The above could be attributed to increased visible light absorption, the extended lifetime of photogenerated electrons, and generation of oxygen vacancies.


  • Direct Z-scheme MgIn 2 S 4 /TiO 2 heterojunction for enhanced photocathodic protection of metals under visible light

    by Hong Li, Xingqiang Cui, Weizhe Song, Zhanyuan Yang, Yanhui Li, Pengfei Zhang, Zongmin Zheng, Yuqi Wang, Junru Li, Fubin Ma

    To improve the photocathodic protection performance of traditional TiO 2 photoanodes for metals, constructing a Z-scheme heterojunction is one of the most promising and creative strategies. Herein, we fabricated a novel Z-scheme MgIn 2 S 4 nanosheets/TiO 2 nanotube nanocomposite through anodization and hydrothermal method. The optimized Z-scheme MgIn 2 S 4 /TiO 2 nanocomposites exhibited stronger visible light absorption, higher separation efficiency of photoelectrons and photocathodic protection performances in comparison to pure TiO 2 . The theoretical analysis and experimental results show that the Z-scheme heterojunction and oxygen vacancies jointly improved the separation efficiency of photogenerated electron–hole pairs and visible light absorption capacity, thereby improving the photoelectric conversion performance of the MgIn 2 S 4 /TiO 2 nanocomposites. Furthermore, the influence of the precursor solution concentration on the photocathodic protection performances of the composites was investigated. As a result, when the concentration of magnesium source in the precursor solution was 0.06 mmol, the prepared MgIn 2 S 4 /TiO 2 -0.06 displayed the best photocathodic protection performance. In addition, the hydroxyl radicals (·OH) generated in the electron spin resonance (ESR) experiment verified the Z-scheme heterojunction mechanism of the MgIn 2 S 4 /TiO 2 composite, and also demonstrated the excellent redox performance of the composite. This work provides valuable reference for the construction of high-performance Z-scheme heterojunctions for photocathode protection of metals.


  • Open Access

    Combined Effect of Alternating Current Interference and Cathodic Protection on Pitting Corrosion and Stress Corrosion Cracking Behavior of X70 Pipeline Steel in Near-Neutral pH Environment

    by Liwei Wang, Lianjun Cheng, Junru Li, Zhifu Zhu, Shuowei Bai, Zhongyu Cui

    Influence of alternating current (AC) on pitting corrosion and stress corrosion cracking (SCC) behavior of X70 pipeline steel in the near-neutral pH environment under cathodic protection (CP) was investigated. Both corrosion and SCC are inhibited by −0.775 VSCE CP without AC interference. With the superimposition of AC current (1–10 mA/cm2), the direct current (DC) potential shifts negatively under the CP of −0.775 VSCE and the cathodic DC current decreases and shifts to the anodic direction. Under the CP potential of −0.95 VSCE and −1.2 VSCE, the applied AC current promotes the cathodic reaction and leads to the positive shift of DC potential and increase of cathodic current. Local anodic dissolution occurs attributing to the generated anodic current transients in the positive half-cycle of the AC current, resulting in the initiation of corrosion pits (0.6–2 μm in diameter). AC enhances the SCC susceptibility of X70 steel under −0.775 VSCE CP, attributing to the promotion of anodic dissolution and hydrogen evolution. Even an AC current as low as 1 mA/cm2 can enhance the SCC susceptibility.