YYYeo Jung Yoon

Yeo Jung Yoon

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yeo Jung Yoon has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Sensor-Based Planning and Control for Conformal Deposition on a Deformable Surface Using an Articulated Industrial Robot

    by Yang Yang, Ying Cai, Yeo Jung Yoon, Hangbo Zhao, Satyandra K. Gupta

    Robotic manipulators can be used to deposit materials on non-planar surfaces. Conventional sensor-based industrial robots can only work on stationary surfaces, relying on the scanned data prior to printing. As a result, performing depositions that involve changes in plane motion presents significant challenges. The deposition of conformal materials on a time-varying deformable surface requires the manipulators to update coordinates in real time on the plane for positioning and orientation. This can be achieved by employing multiple sensors for manipulator motion planning and control, in order to prevent collisions between the tool and the surface. In this paper, we propose simple tool center point calibration, initial point coordinate estimation, and a gap compensation scheme to combine real-time feedback control and direct conformal deposition. Combining these elements allows us to maintain a controlled gap between the tooltip and the deformable surface during the deposition. We test the efficacy of the proposed approach by printing a single layer of ink patterns with approximately 950 μm line width on a deformable surface. We also characterize the printing quality with different gaps and printing steps and show that sensor-based control is critical in smooth printing. Finally, the effects of changing the relative position of the tooltip, different surface colors, and laser sensor position are characterized.


  • Self-Supervised Learning of Spatially Varying Process Parameter Models for Robotic Finishing Tasks

    by Yeo Jung Yoon, Santosh V. Narayan, Satyandra K. Gupta

    This article presents a self-supervised learning approach for a robot to learn spatially varying process parameter models for contact-based finishing tasks. In many finishing tasks, a part has spatially varying stiffness. Some regions of the part enable the robot to efficiently execute the task. On the other hand, some other regions on the part may require the robot to move cautiously in order to prevent damage and ensure safety. Compared to the constant process parameter models, spatially varying process parameter models are more complex and challenging to learn. Our self-supervised learning approach consists of utilizing an initial parameter space exploration method, surrogate modeling, selection of region sequencing policy, and development of process parameter selection policy. We showed that by carefully selecting and optimizing learning components, this approach enables a robot to efficiently learn spatially varying process parameter models for a given contact-based finishing task. We demonstrated the effectiveness of our approach through computational simulations and physical experiments with a robotic sanding case study. Our work shows that the learning approach that has been optimized based on task characteristics significantly outperforms an unoptimized learning approach based on the overall task completion time.


  • A Survey of Wheeled Mobile Manipulation: A Decision-Making Perspective

    by Shantanu Thakar, Srivatsan Srinivasan, Sarah Al-Hussaini, Prahar M. Bhatt, Pradeep Rajendran, Yeo Jung Yoon, Neel Dhanaraj, Rishi K. Malhan, Matthias Schmid, Venkat N. Krovi, et al.

    Mobile manipulators that combine base mobility with the dexterity of an articulated manipulator have gained popularity in numerous applications ranging from manufacturing and infrastructure inspection to domestic service. Deployments span a range of interaction tasks with the operational environment comprising minimal interaction tasks such as inspection and complex interaction tasks such as logistics resupply and assembly. This flexibility, offered by the redundancy, needs to be carefully orchestrated to realize enhanced performance. Thus, advanced decision-support methodologies and frameworks are crucial for successful mobile manipulation in (semi-) autonomous and teleoperation contexts. Given the enormous scope of the literature, we restrict our attention to decision-support frameworks specifically in the context of wheeled mobile manipulation. Hence, here, we present a classification of wheeled mobile manipulation literature while accounting for its diversity. The intertwining of the deployment tasks, application arenas, and decision-making methodologies are discussed with an eye for future avenues for research.


  • Open Access

    Automated Planning for Robotic Multi-Resolution Additive Manufacturing

    by Prahar M. Bhatt, Ashish Kulkarni, Rishi K. Malhan, Brual C. Shah, Yeo Jung Yoon, Satyandra K. Gupta

    Conventional material extrusion additive manufacturing (AM) processes require the user to make a trade-off between surface quality and build time of the part. A large bead filament deposition can speed up the build process; however, it leads to surfaces with high roughness due to the stair-stepping effect. The surface quality can be improved by using a small bead filament deposition, which increases the build time of the part. We present a new approach incorporating hybrid multi-resolution layers in material extrusion additive manufacturing to provide excellent surface quality without increasing the build time. Our slicing algorithm generates planar layers with large filaments to fill the interior regions in less time. The generated exterior layers are conformal and use small filaments to reduce the stair-stepping effect and improve surface quality. We also present a path planning algorithm to build parts with a single manipulator using a multi-nozzle extrusion tool. The path planning algorithm generates a smooth material deposition path by avoiding collision between the tool and the already built layers. It reduces the collision checks and performs collision detection in a computationally efficient manner. We build five parts to validate our approach and illustrate the benefits of multi-resolution AM.


  • Open Access

    A Robotic Cell for Embedding Prefabricated Components in Extrusion-Based Additive Manufacturing

    by Yeo Jung Yoon, Oswin Almeida, Aniruddha Shembekar, Satyandra Gupta

    Recently, there has been increasing interest in performing extrusion-based additive manufacturing (AM) process by using a robotic manipulator. By simply attaching a material extrusion system to the robotic arm, the robot can perform free-form printing in 3-D spaces and deposit materials onto complex surfaces. Also, robotic manipulators can maximize the task utility by performing

  • Open Access

    A Robotic Cell for Embedding Prefabricated Components in Extrusion-Based Additive Manufacturing

    by Yeo Jung Yoon, Oswin Almeida, Aniruddha Shembekar, Satyandra Gupta

    Recently, there has been increasing interest in performing extrusion-based additive manufacturing (AM) process by using a robotic manipulator. By simply attaching a material extrusion system to the robotic arm, the robot can perform free-form printing in 3-D spaces and deposit materials onto complex surfaces. Also, robotic manipulators can maximize the task utility by performing

  • Top Cited Papers
    Open Access

    Image-Based Surface Defect Detection Using Deep Learning: A Review

    by Prahar M. Bhatt, Rishi K. Malhan, Pradeep Rajendran, Brual C. Shah, Shantanu Thakar, Yeo Jung Yoon, Satyandra K. Gupta

    Automatically detecting surface defects from images is an essential capability in manufacturing applications. Traditional image processing techniques are useful in solving a specific class of problems. However, these techniques do not handle noise, variations in lighting conditions, and backgrounds with complex textures. In recent times, deep learning has been widely explored for use in automation of defect detection. This survey article presents three different ways of classifying various efforts in literature for surface defect detection using deep learning techniques. These three ways are based on defect detection context, learning techniques, and defect localization and classification method respectively. This article also identifies future research directions based on the trends in the deep learning area.


  • Generating Robot Trajectories for Conformal Three-Dimensional Printing Using Nonplanar Layers

    by Aniruddha V. Shembekar, Yeo Jung Yoon, Alec Kanyuck, Satyandra K. Gupta

    Additive manufacturing (AM) technologies have been widely used to fabricate three-dimensional (3D) objects quickly and cost-effectively. However, building parts consisting of complex geometries with curvatures can be a challenging process for the traditional AM system whose capability is restricted to planar layered printing. Using six degrees-of-freedom (DOF) industrial robots for AM overcomes this limitation by allowing the material deposition to take place on nonplanar surfaces. In this paper, we present trajectory planning algorithms for 3D printing using nonplanar material deposition. Trajectory parameters are selected to avoid collision with printing surface and satisfy robot constraints. We have implemented our approach by using a 6DOF robot arm. The complex 3D structures with various curvatures were successfully fabricated with a good surface finish.