Zahra Allahyari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Zahra Allahyari has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Shayan Gholizadeh
Rochester Institute of Technology
10 shared publications - Thomas R. Gaborski
Rochester Institute of Technology
6 shared publications Luis F. Delgadillo
Department of Biomedical Engineering University of Rochester Rochester NY 14620 USA
3 shared publications- Mohammad Ali Shokrgozar
National Cell Bank of Iran, Pasteur Institute of Iran, Tehran, Iran
3 shared publications Fathollah Moztarzadeh
Faculty of Biomedical Engineering, Amirkabir University of Technology, Tehran 1591634311, Iran
2 shared publicationsHenry H. Chung
‡Department of Biomedical Engineering, Rochester Institute of Technology, 160 Lomb Memorial Drive, Rochester, NY 14623, USA
2 shared publications
Latest Publications
- Open Access
Origins and diversity of pan-isotype human bone marrow plasma cells
Bone marrow plasma cells (BMPCs) produce durable, protective IgM, IgG, and IgA antibodies, and in some cases, pro-allergic IgE antibodies, but their properties and sources are unclear. We charted single BMPC transcriptional and clonal heterogeneity in food-allergic and non-allergic individuals across CD19 protein expression given its inverse correlation to BMPC longevity. Transcriptional and clonal diversity revealed distinct functional profiles. Additionally, distribution of somatic hypermutation and intraclonal antibody sequence variance suggest that CD19low and CD19high BMPCs arise from recalled memory and germinal center B cells, respectively. Most IgE BMPCs were from peanut-allergic individuals; two out of 32 from independent donors bound peanut antigens in vitro and in vivo. These findings shed light on BMPC origins and highlight the bone marrow as a source of pathogenic IgE in peanut allergy.
Open AccessOrigins and diversity of pan-isotype human bone marrow plasma cells
Bone marrow plasma cells (BMPCs) produce durable, protective IgM, IgG, and IgA antibodies, and in some cases, pro-allergic IgE antibodies, but their properties and sources are unclear. We charted single BMPC transcriptional and clonal heterogeneity in food-allergic and non-allergic individuals across CD19 protein expression given its inverse correlation to BMPC longevity. Transcriptional and clonal diversity revealed distinct functional profiles. Additionally, distribution of somatic hypermutation and intraclonal antibody sequence variance suggest that CD19low and CD19high BMPCs arise from recalled memory and germinal center B cells, respectively. Most IgE BMPCs were from peanut-allergic individuals; two out of 32 from independent donors bound peanut antigens in vitro and in vivo. These findings shed light on BMPC origins and highlight the bone marrow as a source of pathogenic IgE in peanut allergy.
- Open Access
Effects of Oxygen Plasma Treatment on Parylene C and Parylene N Membrane Biocompatibility for Tissue Barrier Models
Porous membranes are integral components of in vitro tissue barrier and co-culture models and their interaction with cells and tissues directly affects the performance and credibility of these models. Plasma-treated Parylene C and Parylene N are two biocompatible Parylene variants with perceived potential for use in these models but their biocompatibility and biological interactions at their interface with cells are not well understood. Here, we use a simple approach for benchtop oxygen plasma treatment and investigate the changes in cell spreading and extracellular matrix deposition as well as the changes in material surface properties. Our results support the previous findings on the persistent effects of plasma treatment on Parylene biocompatibility while showing a more pronounced improvement for Parylene C over Parylene N. It is observed that although both increased surface roughness and persistent increases in oxygen species govern the plasma-driven improvement, the changes in oxygen concentration at the interface are the dominant factor. Overall, the results of this study provide a clear picture of potential mechanisms of plasma-induced changes in synthetic polymers which have implications for their use in in vitro model systems and other BioMEMS applications.
Open AccessEffects of Oxygen Plasma Treatment on Parylene C and Parylene N Membrane Biocompatibility for Tissue Barrier Models
Porous membranes are integral components of in vitro tissue barrier and co-culture models and their interaction with cells and tissues directly affects the performance and credibility of these models. Plasma-treated Parylene C and Parylene N are two biocompatible Parylene variants with perceived potential for use in these models but their biocompatibility and biological interactions at their interface with cells are not well understood. Here, we use a simple approach for benchtop oxygen plasma treatment and investigate the changes in cell spreading and extracellular matrix deposition as well as the changes in material surface properties. Our results support the previous findings on the persistent effects of plasma treatment on Parylene biocompatibility while showing a more pronounced improvement for Parylene C over Parylene N. It is observed that although both increased surface roughness and persistent increases in oxygen species govern the plasma-driven improvement, the changes in oxygen concentration at the interface are the dominant factor. Overall, the results of this study provide a clear picture of potential mechanisms of plasma-induced changes in synthetic polymers which have implications for their use in in vitro model systems and other BioMEMS applications.
- Open Access
- 24 August 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (17) , 7769
Recent Advances in Cellulose-Based Structures as the Wound-Healing Biomaterials: A Clinically Oriented Review
Application of wound-healing/dressing biomaterials is amongst the most promising approaches for wound repair through protection from pathogen invasion/contamination, maintaining moisture, absorbing exudates, modulating inflammation, and facilitating the healing process. A wide range of materials are used to fabricate wound-healing/dressing biomaterials. Active wound-healing/dressings are next-generation alternatives for passive biomaterials, which provide a physical barrier and induce different biological activities, such as antibacterial, antioxidant, and proliferative effects. Cellulose-based biomaterials are particularly promising due to their tunable physical, chemical, mechanical, and biological properties, accessibility, low cost, and biocompatibility. A thorough description and analysis of wound-healing/dressing structures fabricated from cellulose-based biomaterials is discussed in this review. We emphasize and highlight the fabrication methods, applied bioactive molecules, and discuss the obtained results from in vitro and in vivo models of cellulose-based wound-healing biomaterials. This review paper revealed that cellulose-based biomaterials have promising potential as the wound-dressing/healing materials and can be integrated with various bioactive agents. Overall, cellulose-based biomaterials are shown to be effective and sophisticated structures for delivery applications, safe and multi-customizable dressings, or grafts for wound-healing applications.
- 24 August 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (17) , 7769
Open AccessRecent Advances in Cellulose-Based Structures as the Wound-Healing Biomaterials: A Clinically Oriented Review
Application of wound-healing/dressing biomaterials is amongst the most promising approaches for wound repair through protection from pathogen invasion/contamination, maintaining moisture, absorbing exudates, modulating inflammation, and facilitating the healing process. A wide range of materials are used to fabricate wound-healing/dressing biomaterials. Active wound-healing/dressings are next-generation alternatives for passive biomaterials, which provide a physical barrier and induce different biological activities, such as antibacterial, antioxidant, and proliferative effects. Cellulose-based biomaterials are particularly promising due to their tunable physical, chemical, mechanical, and biological properties, accessibility, low cost, and biocompatibility. A thorough description and analysis of wound-healing/dressing structures fabricated from cellulose-based biomaterials is discussed in this review. We emphasize and highlight the fabrication methods, applied bioactive molecules, and discuss the obtained results from in vitro and in vivo models of cellulose-based wound-healing biomaterials. This review paper revealed that cellulose-based biomaterials have promising potential as the wound-dressing/healing materials and can be integrated with various bioactive agents. Overall, cellulose-based biomaterials are shown to be effective and sophisticated structures for delivery applications, safe and multi-customizable dressings, or grafts for wound-healing applications.
- Open Access
Disrupted Surfaces of Porous Membranes Reduce Nuclear YAP Localization and Enhance Adipogenesis through Morphological Changes
The disrupted surface of porous membranes, commonly used in tissue-chip and cellular co-culture systems, is known to weaken cell-substrate interactions. Here, we investigated whether disrupted surfaces of membranes with micron and sub-micron scale pores affect YAP localization and differentiation of adipose-derived stem cells (ADSCs). We found that these substrates reduce YAP nuclear localization through decreased cell spreading, consistent with reduced cell-substrate interactions, and in turn enhance adipogenesis, while decreasing osteogenesis. Abstract Figure:
Open AccessDisrupted Surfaces of Porous Membranes Reduce Nuclear YAP Localization and Enhance Adipogenesis through Morphological Changes
The disrupted surface of porous membranes, commonly used in tissue-chip and cellular co-culture systems, is known to weaken cell-substrate interactions. Here, we investigated whether disrupted surfaces of membranes with micron and sub-micron scale pores affect YAP localization and differentiation of adipose-derived stem cells (ADSCs). We found that these substrates reduce YAP nuclear localization through decreased cell spreading, consistent with reduced cell-substrate interactions, and in turn enhance adipogenesis, while decreasing osteogenesis. Abstract Figure:
- 9 November 2020
- Published by Wiley in Advanced Materials Technologies
- Vol. 5 (12) , 2000474
Robust and Gradient Thickness Porous Membranes for In Vitro Modeling of Physiological Barriers
Porous membranes are fundamental elements for tissue‐chip barrier and co‐culture models. However, the exaggerated thickness of commonly available membranes may represent a stumbling block impeding a more accurate in vitro modeling. Existing techniques to fabricate membranes such as solvent cast, spin‐coating, sputtering, and plasma‐enhanced chemical vapor deposition (PE‐CVD) result in uniform thickness films. Here, a robust method to generate ultrathin porous parylene C (UPP) membranes is developed not just with precise thicknesses down to 300 nm, but with variable gradients in thicknesses, while at the same time having porosities up to 25%. Surface etching and increased roughness which lead to improved cell attachment is also shown. Next, the mechanical properties of UPP membranes with varying porosity and thickness is examined and the data is fitted to previously published models, which can help determine the practical upper limits of porosity and lower limits of thickness. Lastly, a straightforward approach allowing the successful integration of the UPP membranes into a prototyped 3D‐printed scaffold is validated, demonstrating mechanical robustness and allowing cell adhesion under varying flow conditions. Collectively, the results support the integration and the use of UPP membranes to examine cell–cell interaction in vitro.
- 9 November 2020
- Published by Wiley in Advanced Materials Technologies
- Vol. 5 (12) , 2000474
Robust and Gradient Thickness Porous Membranes for In Vitro Modeling of Physiological Barriers
Porous membranes are fundamental elements for tissue‐chip barrier and co‐culture models. However, the exaggerated thickness of commonly available membranes may represent a stumbling block impeding a more accurate in vitro modeling. Existing techniques to fabricate membranes such as solvent cast, spin‐coating, sputtering, and plasma‐enhanced chemical vapor deposition (PE‐CVD) result in uniform thickness films. Here, a robust method to generate ultrathin porous parylene C (UPP) membranes is developed not just with precise thicknesses down to 300 nm, but with variable gradients in thicknesses, while at the same time having porosities up to 25%. Surface etching and increased roughness which lead to improved cell attachment is also shown. Next, the mechanical properties of UPP membranes with varying porosity and thickness is examined and the data is fitted to previously published models, which can help determine the practical upper limits of porosity and lower limits of thickness. Lastly, a straightforward approach allowing the successful integration of the UPP membranes into a prototyped 3D‐printed scaffold is validated, demonstrating mechanical robustness and allowing cell adhesion under varying flow conditions. Collectively, the results support the integration and the use of UPP membranes to examine cell–cell interaction in vitro.
- Open Access
Robust and Gradient Thickness Porous Membranes for In Vitro Modeling of Physiological Barriers
Porous membranes are fundamental elements for tissue-chip barrier and co-culture models. However, the exaggerated thickness of commonly available membranes impedes an accurate in vitro reproduction of the biological multi-cellular continuum as it occurs in vivo . Existing techniques to fabricate membranes such as solvent cast, spin-coating, sputtering and PE-CVD result in uniform thickness films. To understand critical separation distances for various barrier and co-culture models, a gradient thickness membrane is needed. Here, we developed a robust method to generate ultrathin porous parylene C (UPP) membranes not just with precise thicknesses down to 300 nm, but with variable gradients in thicknesses, while at the same time having porosities up to 25%. We also show surface etching and increased roughness lead to improved cell attachment. Next, we examined the mechanical properties of UPP membranes with varying porosity and thickness and fit our data to previously published models, which can help determine practical upper limits of porosity and lower limits of thickness. Lastly, we validate a straightforward approach allowing the successful integration of the UPP membranes into a prototyped 3D-printed scaffold enabling in vitro barrier modeling and investigation of cell-cell interplay over variable distances using thickness gradients.
Open AccessRobust and Gradient Thickness Porous Membranes for In Vitro Modeling of Physiological Barriers
Porous membranes are fundamental elements for tissue-chip barrier and co-culture models. However, the exaggerated thickness of commonly available membranes impedes an accurate in vitro reproduction of the biological multi-cellular continuum as it occurs in vivo . Existing techniques to fabricate membranes such as solvent cast, spin-coating, sputtering and PE-CVD result in uniform thickness films. To understand critical separation distances for various barrier and co-culture models, a gradient thickness membrane is needed. Here, we developed a robust method to generate ultrathin porous parylene C (UPP) membranes not just with precise thicknesses down to 300 nm, but with variable gradients in thicknesses, while at the same time having porosities up to 25%. We also show surface etching and increased roughness lead to improved cell attachment. Next, we examined the mechanical properties of UPP membranes with varying porosity and thickness and fit our data to previously published models, which can help determine practical upper limits of porosity and lower limits of thickness. Lastly, we validate a straightforward approach allowing the successful integration of the UPP membranes into a prototyped 3D-printed scaffold enabling in vitro barrier modeling and investigation of cell-cell interplay over variable distances using thickness gradients.
- Open Access
Simple and Robust Fabrication and Characterization of Conductive Carbonized Nanofibers Loaded with Gold Nanoparticles for Bone Tissue Engineering Applications
Bone tissue engineering is a new and applicable emerging approach to repair the bone defects. In this regard, designing and robust fabrication of tissue engineering scaffolds that could provide an appropriate environment for cell proliferation and differentiation is of high interest. Electrical conductive scaffolds which provide a substrate for stimulating cell growth and differentiation through a physiologically relevant physical signaling, electrical stimulation, has shown a highly promise in this approach. In this paper, we fabricated carbon nanofiber/gold nanoparticle (CNF/GNP) conductive scaffolds using two distinct methods; blending electrospinning in which gold nanoparticles were blended with electrospinning solution and electrospun, and electrospinning/electrospraying in which gold nanoparticle was electrosprayed simultaneously with electrospinning. The obtained electrospun mats underwent stabilization/carbonization process to prepare CNF/GNP scaffolds. The scaffolds were characterized by SEM, XRD, and Raman spectroscopy. SEM characterizations showed improved morphology and a slight decrease in the diameter of the spinned and sprayed nanofibers with moderate concentrations (from 178.66 ± 38.40 nm to 157.94 ± 24.14 nm and 120.81 ± 13.77 nm, respectively), In the electrosprayed form, better size distributions of nanofibers and less adhesion between individual fibers was observed, while XRD analysis confirmed the crystal structure of the nanofibers. Raman spectroscopy revealed enhancement in the graphitization of the structure, and the electrical conductivity of the structure improved by up to 29.2% and 81% in electrospraying and blending electrospinning modes, respectively. Indirect MTT and LDH toxicity assays directly were performed to assess MG63 cell toxicity, but no significant toxicity was observed and the scaffolds did not adversely affect cell proliferation. Overall, it can be concluded that in early tests, this structure have significant potential for bone tissue engineering applications. Abstract Figure: Figure 1:
Open AccessSimple and Robust Fabrication and Characterization of Conductive Carbonized Nanofibers Loaded with Gold Nanoparticles for Bone Tissue Engineering Applications
Bone tissue engineering is a new and applicable emerging approach to repair the bone defects. In this regard, designing and robust fabrication of tissue engineering scaffolds that could provide an appropriate environment for cell proliferation and differentiation is of high interest. Electrical conductive scaffolds which provide a substrate for stimulating cell growth and differentiation through a physiologically relevant physical signaling, electrical stimulation, has shown a highly promise in this approach. In this paper, we fabricated carbon nanofiber/gold nanoparticle (CNF/GNP) conductive scaffolds using two distinct methods; blending electrospinning in which gold nanoparticles were blended with electrospinning solution and electrospun, and electrospinning/electrospraying in which gold nanoparticle was electrosprayed simultaneously with electrospinning. The obtained electrospun mats underwent stabilization/carbonization process to prepare CNF/GNP scaffolds. The scaffolds were characterized by SEM, XRD, and Raman spectroscopy. SEM characterizations showed improved morphology and a slight decrease in the diameter of the spinned and sprayed nanofibers with moderate concentrations (from 178.66 ± 38.40 nm to 157.94 ± 24.14 nm and 120.81 ± 13.77 nm, respectively), In the electrosprayed form, better size distributions of nanofibers and less adhesion between individual fibers was observed, while XRD analysis confirmed the crystal structure of the nanofibers. Raman spectroscopy revealed enhancement in the graphitization of the structure, and the electrical conductivity of the structure improved by up to 29.2% and 81% in electrospraying and blending electrospinning modes, respectively. Indirect MTT and LDH toxicity assays directly were performed to assess MG63 cell toxicity, but no significant toxicity was observed and the scaffolds did not adversely affect cell proliferation. Overall, it can be concluded that in early tests, this structure have significant potential for bone tissue engineering applications. Abstract Figure: Figure 1:
- 12 December 2019
- Published by American Chemical Society (ACS) in ACS Biomaterials Science & Engineering
- Vol. 6 (2) , 959-968
Micropatterned Poly(ethylene glycol) Islands Disrupt Endothelial Cell–Substrate Interactions Differently from Microporous Membranes
Porous membranes are ubiquitous in cell coculture and tissue-on-a-chip studies. These materials are predominantly chosen for their semipermeable and size exclusion properties to restrict or permit transmigration and cell–cell communication. However, previous studies have shown that pore size, spacing, and orientation affect cell behavior including extracellular matrix production and migration. The mechanism behind this behavior is not fully understood. In this study, we fabricated micropatterned nonfouling poly(ethylene glycol) (PEG) islands to mimic pore openings to decouple the effect of surface discontinuity from potential grip on the vertical contact area provided by pore wall edges. Similar to previous findings on porous membranes, we found that the PEG islands hindered fibronectin fibrillogenesis with cells on patterned substrates producing shorter fibrils. Additionally, cell migration speed over micropatterned PEG islands was greater than unpatterned controls, suggesting that disruption of cell–substrate interactions by PEG islands promoted a more dynamic and migratory behavior, similar to enhanced cell migration on microporous membranes. Preferred cellular directionality during migration was nearly indistinguishable between substrates with identically patterned PEG islands and previously reported behavior over micropores of the same geometry, further confirming disruption of cell–substrate interactions as a common mechanism behind the cellular responses on these substrates. Interestingly, compared to respective controls, there were differences in cell spreading and a lower increase in migration speed over PEG islands compared to prior results on micropores with identical feature size and spacing. This suggests that membrane pores not only disrupt cell–substrate interactions but also provide additional physical factors that affect cellular response.
- 12 December 2019
- Published by American Chemical Society (ACS) in ACS Biomaterials Science & Engineering
- Vol. 6 (2) , 959-968
Micropatterned Poly(ethylene glycol) Islands Disrupt Endothelial Cell–Substrate Interactions Differently from Microporous Membranes
Porous membranes are ubiquitous in cell coculture and tissue-on-a-chip studies. These materials are predominantly chosen for their semipermeable and size exclusion properties to restrict or permit transmigration and cell–cell communication. However, previous studies have shown that pore size, spacing, and orientation affect cell behavior including extracellular matrix production and migration. The mechanism behind this behavior is not fully understood. In this study, we fabricated micropatterned nonfouling poly(ethylene glycol) (PEG) islands to mimic pore openings to decouple the effect of surface discontinuity from potential grip on the vertical contact area provided by pore wall edges. Similar to previous findings on porous membranes, we found that the PEG islands hindered fibronectin fibrillogenesis with cells on patterned substrates producing shorter fibrils. Additionally, cell migration speed over micropatterned PEG islands was greater than unpatterned controls, suggesting that disruption of cell–substrate interactions by PEG islands promoted a more dynamic and migratory behavior, similar to enhanced cell migration on microporous membranes. Preferred cellular directionality during migration was nearly indistinguishable between substrates with identically patterned PEG islands and previously reported behavior over micropores of the same geometry, further confirming disruption of cell–substrate interactions as a common mechanism behind the cellular responses on these substrates. Interestingly, compared to respective controls, there were differences in cell spreading and a lower increase in migration speed over PEG islands compared to prior results on micropores with identical feature size and spacing. This suggests that membrane pores not only disrupt cell–substrate interactions but also provide additional physical factors that affect cellular response.
- Open Access
Electrospun cellulose acetate/gelatin nanofibrous wound dressing containing berberine for diabetic foot ulcer healing: in vitro and in vivo studies
Functional dressing with tailored physicochemical and biological properties is vital for diabetic foot ulcer (DFU) treatment. Our main objective in the current study was to fabricate Cellulose Acetate/Gelatin (CA/Gel) electrospun nanofibrous mat loaded with berberine (Beri) as the DFU dressing. The results demonstrated that the diameter of the nanofibers was around 502 nm, the tensile strength, contact angle, porosity, water vapor permeability, and water uptake ratio of CA/Gel nanofibers were around 2.83 MPa, 58.07, 78.17 %, 11.23 mg/cm2 hr, and 12.78 respectively, while these values for CA/Gel/Beri nanofibers were 2.69 ± 0.05 MPa, 56.93 ± 1, 76.17 ± 0.76 %, 10.17 ± 0.21 mg/cm2 hr, 14.37 ± 0.42 respectively. The bacterial evaluations demonstrated that the dressings are an excellent barrier against bacterial penetration with potent antibacterial activity. The animal studies depicted that the collagen density and angiogenesis score in the CA/Gel/Beri treated group were 88.8±6.7 % and 19.8±3.8, respectively. These findings implied that the incorporation of berberine did not compromise the physical properties of dressing, while improving the biological activates. In conclusion, our findings implied that the prepared mat is a proper wound dressing for DFU management and treatment.
Open AccessElectrospun cellulose acetate/gelatin nanofibrous wound dressing containing berberine for diabetic foot ulcer healing: in vitro and in vivo studies
Functional dressing with tailored physicochemical and biological properties is vital for diabetic foot ulcer (DFU) treatment. Our main objective in the current study was to fabricate Cellulose Acetate/Gelatin (CA/Gel) electrospun nanofibrous mat loaded with berberine (Beri) as the DFU dressing. The results demonstrated that the diameter of the nanofibers was around 502 nm, the tensile strength, contact angle, porosity, water vapor permeability, and water uptake ratio of CA/Gel nanofibers were around 2.83 MPa, 58.07, 78.17 %, 11.23 mg/cm2 hr, and 12.78 respectively, while these values for CA/Gel/Beri nanofibers were 2.69 ± 0.05 MPa, 56.93 ± 1, 76.17 ± 0.76 %, 10.17 ± 0.21 mg/cm2 hr, 14.37 ± 0.42 respectively. The bacterial evaluations demonstrated that the dressings are an excellent barrier against bacterial penetration with potent antibacterial activity. The animal studies depicted that the collagen density and angiogenesis score in the CA/Gel/Beri treated group were 88.8±6.7 % and 19.8±3.8, respectively. These findings implied that the incorporation of berberine did not compromise the physical properties of dressing, while improving the biological activates. In conclusion, our findings implied that the prepared mat is a proper wound dressing for DFU management and treatment.
- Open Access
- 28 February 2019
- Published by Cold Spring Harbor Laboratory in bioRxiv
- p. 563361
Altered Cell-Substrate Behavior on Microporous Membranes is a Result of Disruption and Grip
Porous membranes are ubiquitous in cell co-culture and tissue-on-a-chip studies. These materials are predominantly chosen for their semi-permeable and size exclusion properties to restrict or permit transmigration and cell-cell communication. However, previous studies have shown pore size, spacing and orientation affect cell behavior including extracellular matrix production and migration. The mechanism behind this behavior is not fully understood. In this study, we fabricated micropatterned non-fouling polyethylene glycol (PEG) islands to mimic pores in order to decouple the effect of surface discontinuity from grip provided by pore wall edges. Similar to porous membranes, we found that the PEG islands hindered fibronectin fibrillogenesis with cells on patterned substrates producing shorter fibrils. Additionally, cell migration speed over micropatterned PEG islands was greater than unpatterned controls, suggesting that disruption of cell-substrate interactions by PEG islands promoted a more dynamic and migratory behavior, similarly to cells migrating on microporous membranes. Preferred cellular directionality during migration was nearly identical between substrates with identically patterned PEG islands and micropores, further confirming disruption of cell-substrate interactions as a common mechanism behind the cellular responses on these substrates. Interestingly, cell spreading and the magnitude of migration speed was significantly greater on porous membranes compared to PEG islands with identical feature size and spacing, suggesting pore edges enhanced cellular grip. These results provide a more complete picture on how porous membranes affect cells which are grown on them in an increasing number of cellular barrier and co-culture studies.
- 28 February 2019
- Published by Cold Spring Harbor Laboratory in bioRxiv
- p. 563361
Open AccessAltered Cell-Substrate Behavior on Microporous Membranes is a Result of Disruption and Grip
Porous membranes are ubiquitous in cell co-culture and tissue-on-a-chip studies. These materials are predominantly chosen for their semi-permeable and size exclusion properties to restrict or permit transmigration and cell-cell communication. However, previous studies have shown pore size, spacing and orientation affect cell behavior including extracellular matrix production and migration. The mechanism behind this behavior is not fully understood. In this study, we fabricated micropatterned non-fouling polyethylene glycol (PEG) islands to mimic pores in order to decouple the effect of surface discontinuity from grip provided by pore wall edges. Similar to porous membranes, we found that the PEG islands hindered fibronectin fibrillogenesis with cells on patterned substrates producing shorter fibrils. Additionally, cell migration speed over micropatterned PEG islands was greater than unpatterned controls, suggesting that disruption of cell-substrate interactions by PEG islands promoted a more dynamic and migratory behavior, similarly to cells migrating on microporous membranes. Preferred cellular directionality during migration was nearly identical between substrates with identically patterned PEG islands and micropores, further confirming disruption of cell-substrate interactions as a common mechanism behind the cellular responses on these substrates. Interestingly, cell spreading and the magnitude of migration speed was significantly greater on porous membranes compared to PEG islands with identical feature size and spacing, suggesting pore edges enhanced cellular grip. These results provide a more complete picture on how porous membranes affect cells which are grown on them in an increasing number of cellular barrier and co-culture studies.