Jaroslav Žák
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jaroslav Žák has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Jiří Šál
Department of Civil Engineering, Faculty of Technology, Institute of Technology and Business, Okružní 517/10, 370 01 České Budějovice, Czech Republic
3 shared publications - Jan Fořt
Department of Materials Engineering and Chemistry, Faculty of Civil Engineering, Czech Technical University in Prague, Thákurova 7, Prague 6, 166 29 Prague, Czech Republic
2 shared publications - Michal Kraus
Department of Civil Engineering Faculty of Technology Institute of Technology and Business Okruzni 517/10 370 01 Ceske Budejovice Czech Republic
2 shared publications - Robert Černý
Department of Materials Engineering and Chemistry, Faculty of Civil Engineering, Czech Technical University in Prague, Thákurova 7, Prague 6, 166 29 Prague, Czech Republic
2 shared publications - Ales Kankovsky
Institute of Technology and Business in České Budějovice, Department of Civil Engineering, 370 01 České Budějovice, Czech Republic
1 shared publication - Ingrid Juhasova Senitkova
Department of Civil Engineering Faculty of Technology Institute of Technology and Business in Ceske Budejovice Okruzni 517/10 370 01 Ceske Budejovice Czech Republic
1 shared publication
Latest Publications
- Open Access
- 1 November 2026
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (1)
Green Roofs as a Tool for Urban Climate Adaptation: Hydrological Performance, Evapotranspiration Potential and Methodological Challenges in the Central European Context
Green roofs are often presented as a simple adaptation measure for two urban problems at once: rapid stormwater runoff and the overheating of dense built - up areas. In reality, their performance is not a fixed property of the roof assembly, but the result of a changing water balance. Substrate depth, antecedent moisture, rainfall intensity, vegetation condition, evaporative demand and season all determine how much water is retained, how quickly runoff begins and how much cooling can be produced through evapotranspiration. This is especially important in Central Europe, where a roof may retain a large part of annual rainfall through many small and medium events, but may provide much weaker protection during intense storms or in periods when the substrate is already saturated. The direct transfer of retention values from wetter or milder climates into regional design practice can therefore lead to misleading expectations. This paper evaluates green roofs as a coupled hydrological and microclimatic measure using a case study of an administrative building in Prague with a flat roof area of 514.38 m². Three vegetated assemblies, extensive, semi - intensive and intensive, are compared with an impervious reference roof. Annual runoff is calculated from runoff coefficients used in Czech design practice, while maximum retained volume is derived from the manufacturer - declared water capacity of the individual roof layers. The short - term hydraulic response is assessed by a fifteen - minute design - storm calculation according to ČSN EN 12056 - 3 and ČSN 75 9010. Evapotranspiration potential for the 2019 – 2023 period is estimated by the Penman – Monteith method for a reference grass surface using meteorological data for Prague. The results show that replacing the impervious roof with a vegetated assembly can substantially reduce calculated annual runoff and peak discharge. The impervious reference roof discharged about 270 m³ per year, while the calculated annual runoff decreased to 180 m³ for the extensive roof, 90 m³ for the semi - intensive roof and 30 m³ for the intensive roof. Maximum retained volume increased from 18.0 – 33.4 m³ for extensive systems to 51.7 – 78.0 m³ for semi - intensive systems and 162.9 – 195.2 m³ for intensive systems. The design - storm calculation produced peak flows of 8.93, 5.58 and 3.35 l·s⁻¹ for the extensive, semi - intensive and intensive roof, respectively. The Penman – Monteith estimate indicated that approximately 72% of annual rainfall could potentially be returned to the atmosphere, but this value must be read as an upper estimate rather than as the measured behavior of a specific roof under summer water stress. The study shows that the deepest assembly is not automatically the most balanced regional solution. For Central European buildings, robust design should combine suitable substrate depth, high water - holding capacity, drought - resilient vegetation and, where appropriate, moisture - controlled irrigation supplied from stored rainwater.
- 1 November 2026
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (1)
Open AccessGreen Roofs as a Tool for Urban Climate Adaptation: Hydrological Performance, Evapotranspiration Potential and Methodological Challenges in the Central European Context
Green roofs are often presented as a simple adaptation measure for two urban problems at once: rapid stormwater runoff and the overheating of dense built - up areas. In reality, their performance is not a fixed property of the roof assembly, but the result of a changing water balance. Substrate depth, antecedent moisture, rainfall intensity, vegetation condition, evaporative demand and season all determine how much water is retained, how quickly runoff begins and how much cooling can be produced through evapotranspiration. This is especially important in Central Europe, where a roof may retain a large part of annual rainfall through many small and medium events, but may provide much weaker protection during intense storms or in periods when the substrate is already saturated. The direct transfer of retention values from wetter or milder climates into regional design practice can therefore lead to misleading expectations. This paper evaluates green roofs as a coupled hydrological and microclimatic measure using a case study of an administrative building in Prague with a flat roof area of 514.38 m². Three vegetated assemblies, extensive, semi - intensive and intensive, are compared with an impervious reference roof. Annual runoff is calculated from runoff coefficients used in Czech design practice, while maximum retained volume is derived from the manufacturer - declared water capacity of the individual roof layers. The short - term hydraulic response is assessed by a fifteen - minute design - storm calculation according to ČSN EN 12056 - 3 and ČSN 75 9010. Evapotranspiration potential for the 2019 – 2023 period is estimated by the Penman – Monteith method for a reference grass surface using meteorological data for Prague. The results show that replacing the impervious roof with a vegetated assembly can substantially reduce calculated annual runoff and peak discharge. The impervious reference roof discharged about 270 m³ per year, while the calculated annual runoff decreased to 180 m³ for the extensive roof, 90 m³ for the semi - intensive roof and 30 m³ for the intensive roof. Maximum retained volume increased from 18.0 – 33.4 m³ for extensive systems to 51.7 – 78.0 m³ for semi - intensive systems and 162.9 – 195.2 m³ for intensive systems. The design - storm calculation produced peak flows of 8.93, 5.58 and 3.35 l·s⁻¹ for the extensive, semi - intensive and intensive roof, respectively. The Penman – Monteith estimate indicated that approximately 72% of annual rainfall could potentially be returned to the atmosphere, but this value must be read as an upper estimate rather than as the measured behavior of a specific roof under summer water stress. The study shows that the deepest assembly is not automatically the most balanced regional solution. For Central European buildings, robust design should combine suitable substrate depth, high water - holding capacity, drought - resilient vegetation and, where appropriate, moisture - controlled irrigation supplied from stored rainwater.
- Open Access
- 5 November 2025
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (2)
Integration of Green Roofs and Facades as a Climate Change Adaptation Strategy: Environmental, Energy, and Microclimatic Aspects
The study examines the integration of green roofs and facades as an effective strategy for mitigating the adverse effects of climate change in urban environments. Urban areas face growing challenges due to the urban heat island effect, increased stormwater runoff, deteriorating air quality, and rising energy consumption. Green roofs and facades offer a sustainable solution by enhancing building performance and improving the surrounding microclimate through the natural benefits of vegetation. The research evaluates the technical and environmental advantages of vegetative roof and facade systems using detailed case studies and simulation models. Key findings demonstrate that green roofs and facades improve thermal insulation by reducing heat transfer through the building envelope, leading to lower indoor temperatures in summer and reduced heat loss in winter, which decreases the need for heating and cooling and results in lower energy consumption and greenhouse gas emissions. These systems also mitigate the urban heat island effect by absorbing solar radiation and cooling the surrounding air through evapotranspiration. Improved stormwater management is another benefit, as green roofs retain rainwater and slow runoff, reducing pressure on drainage systems and lowering the risk of flooding. Enhanced air quality is achieved through the capture of particulate matter and the absorption of pollutants such as carbon dioxide (CO₂) and nitrogen oxides (NOₓ). The study identifies key design parameters influencing performance, including substrate composition, plant selection, irrigation methods, and structural load capacity. A comparative analysis of extensive and intensive green roofs shows that extensive roofs, with shallow substrates and low-maintenance plants, offer adaptability and low maintenance but lower insulation, while intensive roofs, with deeper substrates and diverse plantings, provide higher insulation and greater biodiversity but require more upkeep. Green facades, especially those using hydroponic modular systems, have proven effective in reducing noise and air pollution while improving the building’s microclimate. The study concludes that integrating green roofs and facades represents a scalable and sustainable solution for enhancing urban resilience to climate change, offering significant environmental, economic, and social benefits.
- 5 November 2025
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (2)
Open AccessIntegration of Green Roofs and Facades as a Climate Change Adaptation Strategy: Environmental, Energy, and Microclimatic Aspects
The study examines the integration of green roofs and facades as an effective strategy for mitigating the adverse effects of climate change in urban environments. Urban areas face growing challenges due to the urban heat island effect, increased stormwater runoff, deteriorating air quality, and rising energy consumption. Green roofs and facades offer a sustainable solution by enhancing building performance and improving the surrounding microclimate through the natural benefits of vegetation. The research evaluates the technical and environmental advantages of vegetative roof and facade systems using detailed case studies and simulation models. Key findings demonstrate that green roofs and facades improve thermal insulation by reducing heat transfer through the building envelope, leading to lower indoor temperatures in summer and reduced heat loss in winter, which decreases the need for heating and cooling and results in lower energy consumption and greenhouse gas emissions. These systems also mitigate the urban heat island effect by absorbing solar radiation and cooling the surrounding air through evapotranspiration. Improved stormwater management is another benefit, as green roofs retain rainwater and slow runoff, reducing pressure on drainage systems and lowering the risk of flooding. Enhanced air quality is achieved through the capture of particulate matter and the absorption of pollutants such as carbon dioxide (CO₂) and nitrogen oxides (NOₓ). The study identifies key design parameters influencing performance, including substrate composition, plant selection, irrigation methods, and structural load capacity. A comparative analysis of extensive and intensive green roofs shows that extensive roofs, with shallow substrates and low-maintenance plants, offer adaptability and low maintenance but lower insulation, while intensive roofs, with deeper substrates and diverse plantings, provide higher insulation and greater biodiversity but require more upkeep. Green facades, especially those using hydroponic modular systems, have proven effective in reducing noise and air pollution while improving the building’s microclimate. The study concludes that integrating green roofs and facades represents a scalable and sustainable solution for enhancing urban resilience to climate change, offering significant environmental, economic, and social benefits.
- Open Access
- 1 November 2021
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1203 (3) , 032005
DEA Modelling Effectiveness of Building Envelopes
Today, insulated building envelopes must not only meet thermal-technical, mechanical, and economic requirements but must also be environmentally friendly. These requirements are often contradictory, and it is not clear what the effective option is for a particular case. The aim of the paper is to compare twenty different variants of building envelopes, not only in terms of thermal-technical properties but also in terms of environmental parameters and time and financial demands. The result of the paper is the determination of effective variants by a suitable mathematical method with consideration of all the above-mentioned influences.
- 1 November 2021
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1203 (3) , 032005
Open AccessDEA Modelling Effectiveness of Building Envelopes
Today, insulated building envelopes must not only meet thermal-technical, mechanical, and economic requirements but must also be environmentally friendly. These requirements are often contradictory, and it is not clear what the effective option is for a particular case. The aim of the paper is to compare twenty different variants of building envelopes, not only in terms of thermal-technical properties but also in terms of environmental parameters and time and financial demands. The result of the paper is the determination of effective variants by a suitable mathematical method with consideration of all the above-mentioned influences.
- Open Access
Lightweight Concretes with Improved Water and Water Vapor Transport for Remediation of Damp Induced Buildings
Most of the historical and old building stock in Europe are constructed from masonry, when brick, stones, or their combination are bound with traditional mortars. Rising damp, due to accompanying effects, is the main factor influencing the quality of indoor climate as well as having an important impact on the durability of masonry structures. In this study, new types of lightweight concrete with waste aggregate content as a suitable material for remediation of damp damaged masonries were designed and tested. Alternative aggregate served as silica sand substitution in the range of 0–100 vol.%. Basic structural properties, mechanical resistance, water, and water vapor transport properties were measured after 28 days of water curing and were compared with dense reference concrete and with traditional masonry materials as well. Moreover, the porous structure of produced concretes and changes caused by usage of alternative aggregate usage were evaluated with the mercury intrusion porosimetry (MIP) technique. Obtained experimental data showed the suitability of modified concretes with 25–50 vol.% of waste aggregate content to ensure acceptable strength and hydric properties, and these properties were found to be comparable with masonry structures and materials used in the past.
Open AccessLightweight Concretes with Improved Water and Water Vapor Transport for Remediation of Damp Induced Buildings
Most of the historical and old building stock in Europe are constructed from masonry, when brick, stones, or their combination are bound with traditional mortars. Rising damp, due to accompanying effects, is the main factor influencing the quality of indoor climate as well as having an important impact on the durability of masonry structures. In this study, new types of lightweight concrete with waste aggregate content as a suitable material for remediation of damp damaged masonries were designed and tested. Alternative aggregate served as silica sand substitution in the range of 0–100 vol.%. Basic structural properties, mechanical resistance, water, and water vapor transport properties were measured after 28 days of water curing and were compared with dense reference concrete and with traditional masonry materials as well. Moreover, the porous structure of produced concretes and changes caused by usage of alternative aggregate usage were evaluated with the mercury intrusion porosimetry (MIP) technique. Obtained experimental data showed the suitability of modified concretes with 25–50 vol.% of waste aggregate content to ensure acceptable strength and hydric properties, and these properties were found to be comparable with masonry structures and materials used in the past.
- Open Access
Combined Effect of Superabsorbent Polymers and Cellulose Fibers on Functional Performance of Plasters
Plaster has, from ancient times, been used as a decorative material. However, the advances in materials engineering such as thermal and moisture control provide new opportunities. Superabsorbent polymers (SAPs) have been found to possess passive moisture control that may find utilization in modern buildings. However, the main drawback is associated with a limited number of applicable SAPs due to mechanical strength loss. In this regard, concurrent utilization of cellulose fibers may provide additional benefits linked with the reinforcing of plaster structure and preservation of superior hygric properties. In this regard, this study investigates the combined effect of SAP and cellulose fibers on the material properties of cement-lime plaster in terms of its mechanic, thermal, and hygric properties. To access the capability of such modified plasters to control the interior moisture fluctuations, the moisture buffering value is determined. Obtained results show the effect of both applied admixtures on material performance, whilst the synergic effect was most obvious for humidity control accessed through the moisture buffer coefficient.
Open AccessCombined Effect of Superabsorbent Polymers and Cellulose Fibers on Functional Performance of Plasters
Plaster has, from ancient times, been used as a decorative material. However, the advances in materials engineering such as thermal and moisture control provide new opportunities. Superabsorbent polymers (SAPs) have been found to possess passive moisture control that may find utilization in modern buildings. However, the main drawback is associated with a limited number of applicable SAPs due to mechanical strength loss. In this regard, concurrent utilization of cellulose fibers may provide additional benefits linked with the reinforcing of plaster structure and preservation of superior hygric properties. In this regard, this study investigates the combined effect of SAP and cellulose fibers on the material properties of cement-lime plaster in terms of its mechanic, thermal, and hygric properties. To access the capability of such modified plasters to control the interior moisture fluctuations, the moisture buffering value is determined. Obtained results show the effect of both applied admixtures on material performance, whilst the synergic effect was most obvious for humidity control accessed through the moisture buffer coefficient.
- Open Access
- 1 December 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 960 (4) , 042100
Modelling Effectiveness of Environmental Greenery Systems as a Tool to Partially Eliminate Urban Overheating
The paper describes the first results of modelling the effectiveness of environmental greenery systems as a tool for partial elimination of urban overheating. Environmental greenery contributes to the effective management of rainwater flowing from the paved surfaces of the cities. Technical measures will reduce temperature fluctuations, noise pollution and dust concentration. The new rainwater management will contribute to reducing the temperature fluctuations, especially in summer. The evaporation of vertical environmental greenery will at least partially reduce the negative impact of the climate change. Urban greenery is one of the effective measures for urban heat island mitigation and climatic change. The numerical model gives a first idea of how large areas of environmental greenery need to be installed in order to benefit the above-mentioned benefits.
- 1 December 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 960 (4) , 042100
Open AccessModelling Effectiveness of Environmental Greenery Systems as a Tool to Partially Eliminate Urban Overheating
The paper describes the first results of modelling the effectiveness of environmental greenery systems as a tool for partial elimination of urban overheating. Environmental greenery contributes to the effective management of rainwater flowing from the paved surfaces of the cities. Technical measures will reduce temperature fluctuations, noise pollution and dust concentration. The new rainwater management will contribute to reducing the temperature fluctuations, especially in summer. The evaporation of vertical environmental greenery will at least partially reduce the negative impact of the climate change. Urban greenery is one of the effective measures for urban heat island mitigation and climatic change. The numerical model gives a first idea of how large areas of environmental greenery need to be installed in order to benefit the above-mentioned benefits.
- Open Access
Biochar for Vertical Greenery Systems
Vertical greenery systems (VGS) are effective at solving urban heat. They can absorb noise pollution and dust, and, aesthetically, they are positively perceived. Systems using hydroponic irrigation and nutrition, in combination with mineral wool as a base, are light and effective (they are able to hold water, with a high percentage of air, and a good mechanical structure to hold the plant stable). However, the functionality of a system can be compromised if the water supply is depleted or the irrigation system fails. This deficiency can be partially remedied if a certain amount of biochar or a suitable organic fertilizer is also a part of the system. The research task consisted of verifying this assumption and determining the effective amount of the biochar. Samples with different amounts of biochar were examined under the same temperature and humidity conditions; extended drying times, additional costs, and safety tank size savings were found. Subsequently, the effective amount of the biochar was determined by the Data Envelopment Analysis (DEA) method. It has been experimentally verified that biochar has a positive effect and prolongs the drying time; the additional costs are almost offset by the benefits. It should be noted that the results are valid for central Europe, and may be modified for different climate and economic zones.
Open AccessBiochar for Vertical Greenery Systems
Vertical greenery systems (VGS) are effective at solving urban heat. They can absorb noise pollution and dust, and, aesthetically, they are positively perceived. Systems using hydroponic irrigation and nutrition, in combination with mineral wool as a base, are light and effective (they are able to hold water, with a high percentage of air, and a good mechanical structure to hold the plant stable). However, the functionality of a system can be compromised if the water supply is depleted or the irrigation system fails. This deficiency can be partially remedied if a certain amount of biochar or a suitable organic fertilizer is also a part of the system. The research task consisted of verifying this assumption and determining the effective amount of the biochar. Samples with different amounts of biochar were examined under the same temperature and humidity conditions; extended drying times, additional costs, and safety tank size savings were found. Subsequently, the effective amount of the biochar was determined by the Data Envelopment Analysis (DEA) method. It has been experimentally verified that biochar has a positive effect and prolongs the drying time; the additional costs are almost offset by the benefits. It should be noted that the results are valid for central Europe, and may be modified for different climate and economic zones.
- Open Access
- 17 November 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (22) , 9580
Assessment of Wood-Based Fly Ash as Alternative Cement Replacement
The abandonment of coal energy plants in the near future will result in a substantially reduced availability of the coal fly ash broadly used as an efficient supplementary material. In line with the growth of alternative and renewable energy resources, the amount of biomass-based ash rises substantially. Nevertheless, a diverse chemical composition prevents a broader utilization of biomass-based fly ash compared to coal ash on an industrial scale. On this account, the present work is aimed at investigating the basic physical and mechanical properties of concrete mortars modified by a high volume of biomass fly ash (BFA) from wood combustion. Delivered results confirm a significant potential of BFA in the building industry. Experimental analysis of concrete mortars with BFA reveals preservation or even improvement of compressive and bending strength up to 30 wt.% cement replacement. On the contrary, higher dosages induce a gradual decrease in mechanical performance. The performed Life Cycle Assessment analysis reveals the perspective of BFA incorporation taking into account environmental issues considering the ratio between preservation of mechanical performance per normalized endpoint environmental score that allows a direct comparison with other alternatives.
- 17 November 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (22) , 9580
Open AccessAssessment of Wood-Based Fly Ash as Alternative Cement Replacement
The abandonment of coal energy plants in the near future will result in a substantially reduced availability of the coal fly ash broadly used as an efficient supplementary material. In line with the growth of alternative and renewable energy resources, the amount of biomass-based ash rises substantially. Nevertheless, a diverse chemical composition prevents a broader utilization of biomass-based fly ash compared to coal ash on an industrial scale. On this account, the present work is aimed at investigating the basic physical and mechanical properties of concrete mortars modified by a high volume of biomass fly ash (BFA) from wood combustion. Delivered results confirm a significant potential of BFA in the building industry. Experimental analysis of concrete mortars with BFA reveals preservation or even improvement of compressive and bending strength up to 30 wt.% cement replacement. On the contrary, higher dosages induce a gradual decrease in mechanical performance. The performed Life Cycle Assessment analysis reveals the perspective of BFA incorporation taking into account environmental issues considering the ratio between preservation of mechanical performance per normalized endpoint environmental score that allows a direct comparison with other alternatives.
- Open Access
Computational Prediction of Susceptibility to Biofilms Growth: Two-Dimensional Analysis of Critical Construction Details
Retrofitting of historical and traditional buildings is an effective thermal protection measure. The presence of thermal insulation in the composition of building envelopes might, however, bring some shortages due to a decrease of exterior surface temperatures or possible water vapor condensation. These shortages can improve living conditions for various microorganisms on the exterior surfaces, especially in the case of interior thermal insulation systems that are typical with thermal bridges and thus supply the surface with heat to a greater extent. This paper, therefore, aims at the investigation of hygrothermal conditions in selected critical construction details and evaluates the results from the point of view of potential biofilms growth. Two-dimensional modeling of coupled heat and moisture is applied and the hygrothermal patterns are evaluated based on an adjusted isopleth growth model. The results showed that the duration of favorable conditions for biofilms growth is relatively low, accounting for less than 180 h in the worst-case scenario. It means the exterior surfaces of historical buildings provided with interior thermal insulation systems are not threatened by biofilms growth. Anyway, other negative aspects have been revealed that should be treated individually. Possible wood decay or increased hygrothermal straining are the typical examples in that respect.
Open AccessComputational Prediction of Susceptibility to Biofilms Growth: Two-Dimensional Analysis of Critical Construction Details
Retrofitting of historical and traditional buildings is an effective thermal protection measure. The presence of thermal insulation in the composition of building envelopes might, however, bring some shortages due to a decrease of exterior surface temperatures or possible water vapor condensation. These shortages can improve living conditions for various microorganisms on the exterior surfaces, especially in the case of interior thermal insulation systems that are typical with thermal bridges and thus supply the surface with heat to a greater extent. This paper, therefore, aims at the investigation of hygrothermal conditions in selected critical construction details and evaluates the results from the point of view of potential biofilms growth. Two-dimensional modeling of coupled heat and moisture is applied and the hygrothermal patterns are evaluated based on an adjusted isopleth growth model. The results showed that the duration of favorable conditions for biofilms growth is relatively low, accounting for less than 180 h in the worst-case scenario. It means the exterior surfaces of historical buildings provided with interior thermal insulation systems are not threatened by biofilms growth. Anyway, other negative aspects have been revealed that should be treated individually. Possible wood decay or increased hygrothermal straining are the typical examples in that respect.
- Open Access
- 1 September 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 603 (5) , 052086
Green Technology for Motorway Overpasses
Overpasses are essential to establish permeability of highways for the wildlife. Width and length are the key technical parameters influencing the overpass effectiveness. It is crucial to secure the proper technology and correct water management on its surface. Wildlife behaviour and their requirements for the above stated technical parameters of overpasses have also been investigated. In all cases, the overpass performance increases with enlarging the width and drop with an increasing length. The goal is therefore to achieve a balanced compromise allowing sufficient functionality while also sustaining reasonable costs. Data envelopment analysis (DEA) provides a method to select a “good” solution in the sense of sufficient overpass performance with moderate total expenses. Overpass performance calculations were made on the original methodology pioneered by the author. Overall expenses were provided based on actual construction costs in the Czech Republic, including expenses for preparations, design, construction, maintenance, and demolition. The results show that DEA has proven to be a very appropriate method for identifying suitable solutions that can be effective in designing measures to secure the highway’s permeability for the wildlife.
- 1 September 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 603 (5) , 052086
Open AccessGreen Technology for Motorway Overpasses
Overpasses are essential to establish permeability of highways for the wildlife. Width and length are the key technical parameters influencing the overpass effectiveness. It is crucial to secure the proper technology and correct water management on its surface. Wildlife behaviour and their requirements for the above stated technical parameters of overpasses have also been investigated. In all cases, the overpass performance increases with enlarging the width and drop with an increasing length. The goal is therefore to achieve a balanced compromise allowing sufficient functionality while also sustaining reasonable costs. Data envelopment analysis (DEA) provides a method to select a “good” solution in the sense of sufficient overpass performance with moderate total expenses. Overpass performance calculations were made on the original methodology pioneered by the author. Overall expenses were provided based on actual construction costs in the Czech Republic, including expenses for preparations, design, construction, maintenance, and demolition. The results show that DEA has proven to be a very appropriate method for identifying suitable solutions that can be effective in designing measures to secure the highway’s permeability for the wildlife.