SCShanliang Chen

Shanliang Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Shanliang Chen has a total of 123 co-authors. Here are the top co-authors by number of shared publications:

  • Lin Wang

    Institute of Micro/Nano Materials and Devices Ningbo University of Technology Ningbo 315211 P. R. China

    19 shared publications
  • Weiyou Yang

    Institute of Micro/Nano Materials and Devices, Ningbo University of Technology, Ningbo, 315211, P. R. China

    18 shared publications
  • Fengmei Gao

    Institute of Micro/Nano Materials and Devices, Ningbo University of Technology, Ningbo 315211, China

    17 shared publications
  • Weijun Li

    Institute of Micro/Nano Materials and Devices Ningbo University of Technology Ningbo People's Republic of China

    13 shared publications
  • Xiaoxiao Li

    School of Physics and Electronic Engineering Jiangsu Normal University Xuzhou 221116 P. R. China

    9 shared publications
  • Weiyou Yang

    Institute of Micro/Nano Materials and Devices Ningbo University of Technology Ningbo 315211 P. R. China

    8 shared publications

Latest Publications

  • Research Progress in Photoelectrochemical Photodetectors Based on Integrated Self‐Supporting Photoelectrodes: Design, Fabrication, and Applications

    by Jia Zhang, Hongxin Yin, Genqiang Liu, Xiangyang Hu, Zhicheng Zhu, Marko Gloginjić, Marko Erich, Srdjan Petrović, Weijun Li, Weiyou Yang, et al.

    Photoelectrochemical (PEC) photodetectors (PDs) are devices that detect optical signals through photo‐induced carrier migration and photoelectric conversion at the electrolyte–semiconductor interface via PEC reactions. Recently, the demand for PEC PD applications in harsh aquatic environments, such as underwater conditions, has increased. Integrated self‐supporting photoelectrodes, in which photoactive materials are directly coupled with current collectors, can serve directly as working photoelectrodes. These photoelectrodes integrate functional modules—including light‐absorbing, charge transport, and catalytic layers—within a unified material system, thereby reducing interfacial contact resistance, enhancing charge transfer efficiency, and establishing high stability of the photoelectrode itself. This review systematically summarizes the research progress and development trends in excellent PEC PDs based on high‐performance integrated self‐supporting photoelectrodes. It first introduces the working principles and performance parameters of PEC PDs and then focuses on the fabrication strategies of integrated self‐supporting photoelectrodes. A comprehensive overview of the main application fields is also presented. Finally, the review identifies current challenges and future trajectories in this domain and provides a unique perspective on photoelectrode design for PEC PDs. This review sheds light on the most pioneering and potentially transformative avenues in this dynamic field. It serves as a foundation for advancing the broader application of PEC PDs.

  • Highly sensitive triethylamine gas sensors enabled by hamburger-like GO/ZnO heterostructures

    by Yazhou Cui, Meiling Li, Dongdong Zhang, Jinghui Bi, Huilin Hou, Fengmei Gao, Shanliang Chen, Weiyou Yang, Weijun Li, Lin Wang

    The rationally designed, hierarchical hamburger-like ZnO/GO heterojunction results in greatly enhanced TEA sensing, delivering outstanding response, excellent selectivity, and an ultra-low detection limit.


  • Highly Photosensitive and Stable SiC/ZnO Nanowire Photoelectrochemical Ultraviolet Photodetector Based on Heterojunction Engineering for Reliable Complex Underwater Application

    by Zhiheng Liu, Hulin Wang, Runchao Dong, Jia Zhang, Hongxin Yin, Genqiang Liu, Weijun Li, Dongdong Zhang, Marko Gloginjić, Marko Erich, et al.

    The precise tailoring of bandgap structures as well as carrier separation and transport behavior via heterojunction engineering can provide a practical and viable pathway for enhancing the performance of low‐dimensional semiconductor devices. In this study, a highly photosensitive photoelectrochemical (PEC) ultraviolet (UV) photodetector (PD) based on a SiC/ZnO heterojunction is explored. The surfaces of SiC nanowires are successfully modified using high‐quality ZnO nanospheres via a simple hydrothermal process. The as‐constructed SiC/ZnO heterojunction nanowire PEC UV PD achieves high photodetection performance—high responsivity (15.76 mA W −1 ), high detectivity (1.827 × 10 10 Jones), excellent external quantum efficiency (5.21%), and fast rise/decay times (186/454 ms), under 375‐nm UV illumination. Remarkably, the device exhibits a high photoresponse under different solution concentrations, temperature conditions, and excellent aging stability over long‐term operation. Its highly sensitive and reliable photodetection performance could be attributed primarily to the synergy among the type‐II charge transfer pathways formed at the SiC/ZnO heterojunction, enhanced photogenerated‐carrier separation efficiency, and improved light–matter interactions enabled by the large specific surface area of the ZnO nanospheres. Overall, this study establishes a paradigm for developing highly sensitive PEC PDs suitable for optical communication under harsh underwater conditions, thereby advancing heterojunction and interfacial engineering strategies for next‐generation optoelectronics.


  • High‐Responsivity SiC/TiO 2 Photoelectrochemical Ultraviolet Photodetector: Heterojunctions with Fast Response Times and Excellent pH Tolerance

    by Bocong Zou, Hulin Wang, Runchao Dong, Jia Zhang, Zhiheng Liu, Yan Lin, Zhicheng Zhu, Xiangyang Hu, Weijun Li, Dongdong Zhang, et al.

    The precise control of the surface properties of low‐dimensional nanostructures is a prerequisite for preserving the intrinsic material quality and manipulating the carrier transport behavior to enhance optoelectronic device performance. Herein, a high‐responsivity photoelectrochemical (PEC) ultraviolet (UV) photodetector (PD) based on SiC/TiO 2 heterojunction nanowires is developed. The surface of SiC nanowires is decorated with high‐quality TiO 2 nanoparticles through a simple hydrothermal process, and a type‐II heterojunction is established. The fabricated SiC/TiO 2 heterojunction nanowire PEC PD exhibited excellent photoresponsivity with high responsivity (50.97 mA W −1 ), detectivity (1.07 × 10 12 Jones), and external quantum efficiency (16.85%) under 375 nm ultraviolet illumination. Response and decay times are as low as 0.3 and 0.1 ms, respectively—these values are within the state‐of‐the‐art range for semiconductor nanostructure–based PEC PDs reported thus far. The device also exhibits excellent photoresponsivity and long‐term stability under different light intensities, even in harsh universal‐pH liquid environments, including acidic, neutral, and alkaline solutions with different concentrations. The elevated photodetection performance of the device is primarily attributed to the effective synergistic effect of the formation of a type‐II charge transfer pathway in the SiC/TiO 2 heterostructure, the optimal load capacity of TiO 2 nanoparticles, and the excellent inherent corrosion resistance of SiC and TiO 2 .


  • High‐Responsivity Self‐Powered Photoelectrochemical UV Photodetector Based on Integrated Self‐Supporting SiC/ZnS Heterojunction Nanowire Arrays

    by Bocong Zou, Yang Yang, Hulin Wang, Weijun Li, Lin Wang, Fengmei Gao, Dongdong Zhang, Marko Gloginjić, Marko Erić, Srdjan Petrović, et al.

    In the realm of photodetector (PD) technology, photoelectrochemical (PEC) PDs have garnered attention owing to their inherent advantages. Advances in this field depend on functional nanostructured materials, which are pivotal in improving the separation and transport of photogenerated electron–hole pairs to improve device efficiency. Herein, a highly photosensitive PEC UV PD is built using integrated self‐supporting SiC/ZnS heterojunction nanowire array photoelectrodes through anodization and chemical deposition. Compared with the original SiC nanoarrays, the optimized SiC/ZnS‐25 nanoarrays exhibit high photocurrent density (Dph, 809.2 µA cm−2), rapid rise/decay times (τr/τd, 4/21 ms), high responsivity (Rλ, 1.226 A W−1), remarkable detectivity (D*, 2.517 × 1011 Jones), and large external quantum efficiency (EQE, 40.57%) under 375 nm UV light with a bias voltage of 0.6 V. Furthermore, SiC/ZnS‐25 delivers excellent self‐powered performance, with Rλ, D*, and EQE reaching 0.91 A W−1, 1.69 × 1011 Jones, and 30.24%, respectively. In addition, the device exhibits excellent long‐term operation and aging stability under a bias voltage of 0.6 V and under self‐powered conditions. The excellent photodetection behaviors of the SiC/ZnS PEC PD are mainly ascribed to the synergistic effect of the novel well‐aligned nanowire geometry, heterojunction with ZnS nanofilms of optimal thickness, and integrated self‐supporting configuration of the photoelectrode.


  • Near-infrared driven N2 fixation on ZnO–MXene (Ti3C2) heterostructures through pyroelectric catalysis

    by Chunzheng Wu, Jingyuan Lin, Zhuojiong Xie, Xuan Kai, Xiao Yu, Zhenyu Yan, Jinwei Fang, Shanliang Chen, Jianzhong Guo, Wei Wang, et al.

    Temperature fluctuations caused by sunlight represent a form of low-quality thermal energy that is generally insufficient for driving chemical reactions. Here, we designed a ZnO–MXene (Ti3C2) heterostructure catalyst, which can harvest solar near-infrared (NIR) energy to drive the sluggish ammonia production reaction using water and N2 as the feedstock. Our research confirmed that ammonia was produced through a pyroelectric process, rather than a photocatalytic process. The ZnO–MXene heterostructure with ∼20 wt% of Ti3C2 exhibited a 6.5-fold improvement in activity compared to bare ZnO. The Ti3C2 not only harvests NIR energy to heat up the pyroelectric ZnO, but also traps the pyro electrons from ZnO and co-catalyzes the reduction of N2 to ammonia. This work offers a novel strategy for ammonia production utilizing the abundant solar NIR energy under ambient conditions.


  • Self‐Powered High‐Responsivity Self‐Supporting SiC/SnO2 Nanoarray Photoelectrochemical Ultraviolet Photodetector: Toward All‐Scenario Harsh Underwater Applications

    by Bocong Zou, Chunmei Chen, Li Sun, Yan Lin, Zhiheng Liu, Weijun Li, Lin Wang, Fengmei Gao, Huan He, Weiyou Yang, et al.

    Battery‐free photodetection is necessary for underwater optical communication, which poses extremely high requirements in terms of the self‐powering capability of photodetectors (PDs) and their ability to operate in harsh liquid environments. Emerging photoelectrochemical (PEC) PDs are appealing owing to their inherent aqueous operation behaviors with highly tunable photoresponses. Herein, a novel self‐powered PEC ultraviolet (UV) PD applicable to all‐scenario harsh underwater environments, including seawater at different latitudes and solutions with different pH values and temperatures, is demonstrated based on integrated self‐supporting SiC/SnO2 heterojunction nanoarrays. The SiC/SnO2 heterojunction nanoarrays are achieved by utilizing the anodic oxidation and chemical bath deposition. The SiC/SnO2 PEC PD demonstrates excellent photodetection performance with rapid rise/decay times (τr/τd, 30/120 ms), high responsivity (Rλ, 1.97 A W−1), remarkable detectivity (D*, 1.98 × 1011 Jones), and large external quantum efficiency (EQE, 65.5%) in seawater under 375 nm UV light illumination with zero bias voltage. Moreover, the PEC PD delivers a high photoresponse and excellent aging stability in different latitudes of the world's oceans. The photodetection capability is robust even under harsh conditions, such as strongly acidic and alkaline liquid conditions, and at high temperatures. The developed device is a new type of photodetection device for future all‐scenario underwater optical communication.


  • High‐Sensitivity Photoelectrochemical Ultraviolet Photodetector with Stable pH‐Universal Adaptability Based on Whole Single‐Crystal Integrated Self‐Supporting 4H‐SiC Nanoarrays

    by Hulin Wang, Weijun Li, Marko Gloginjić, Srdjan Petrović, Tetyana V. Krupska, Vladimir V. Turov, Jialong Zhao, Weiyou Yang, Zhentao Du, Shanliang Chen

    Emerging photoelectrochemical (PEC) photodetectors (PDs) have notable advantages over conventional PDs and have attracted extensive attention. However, harsh liquid environments, such as those with high corrosivity and attenuation, substantially restrict their widespread application. Moreover, most PEC PDs are constructed by assembling numerous nanostructures on current collector substrates, which inevitably contain abundant interfaces and defects, thus greatly weakening the properties of PDs. To address these challenges, a high‐performance pH‐universal PEC ultraviolet (UV) PD based on a whole single‐crystal integrated self‐supporting 4H‐SiC nanopore array photoelectrode is constructed, which is fabricated using a two‐step anodic oxidation approach. The PD exhibits excellent photodetection behavior, with high responsivity (218.77 mA W−1), detectivity (6.64 × 1013 Jones), external quantum efficiency (72.47%), and rapid rise/decay times (17/48 ms) under 375 nm light illumination with a low intensity of 0.15 mW cm−2 and a bias voltage of 0.6 V, which is fall in the state‐of‐the‐art of the wide‐bandgap semiconductor‐based PDs reported thus far. Furthermore, the SiC PEC PD exhibits excellent photoresponse and long‐term operational stability in pH‐universal liquid environments. The improved photodetection performance of the SiC PEC PD is primarily attributed to the synergistic effect of the nanopore array structure, integrated self‐supporting configuration, and single‐crystal structure of the whole photoelectrode.


  • Three-dimensional branched SiC nanowire field emitters with single-crystal integrated structures and increased emission sites: ultralow turn-on field and high stability

    by Jianhong Liu, Yang Yang, Kai Song, Weijun Li, Hulin Wang, Nadiya Vityuk, Nataliia Klymenko, Tetyana V. Krupska, Vladimir V. Turov, Xinsheng Zhao, et al.

    Low turn-on field (Eto) and high current emission stability of cold field emission (FE) cathodes are crucial for their practical application in electronic devices. However, the FE cathodes’ emission sites are still weaker and insufficient for use in actual applications. These issues can be resolved by focusing on the design and assembly of the individual building blocks into a specific three-dimensional (3D) structure. In the current study, a single-crystal integrated N-doped 3D branched SiC nanowire FE cathode was fabricated by controlling the epitaxial growth of high-density SiC dendrites around the SiC backbone nanowires. These nanowires were obtained via repeated pyrolysis of a polymeric precursor and the facile in situ gas-phase cation exchange technique. In addition to offering a large number of electron emission sites, the sturdy 3D branched SiC nanowires may prevent structure degradation brought on by electrostatic forces and Joule heat during long-duration FE operation. The Eto and field enhancement factor (β) of the branched SiC field emitters are respectively measured to be 0.61 V μm−1 and 9530, which are superior in comparison to the majority of reported SiC nanostructure-based FE cathodes. In addition, the cathode possesses extremely high electron emission stability with only 3.5% fluctuation in current emission over a 10 h long operation, suggesting that the findings of the present investigation could furnish a solid foundation for the application of SiC nanostructures as high-performance FE cathodes.