LingLing Lv
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
LingLing Lv has a total of 86 co-authors. Here are the top co-authors by number of shared publications:
Kun Yuan
College of Chemical Engineering and Technology, Tianshui Normal University, Tianshui, Gansu 741001, China
11 shared publicationsYongCheng Wang
College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou, Gansu 730070, China
9 shared publicationsXiaoFang Wang
College of Life Science and Chemistry, Tianshui Normal University, Tianshui, Gansu 741001, People’s Republic of China
6 shared publicationsBoWen Tang
Tianshui Normal University
5 shared publicationsYanYing Zhang
Tianshui Normal University
5 shared publicationsZiYe Ning
Tianshui Normal University
5 shared publications
Latest Publications
- 25 July 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 130 (31) , 6131-6146
Mechanism of Color Purity Regulation in Multiresonance Thermally Activated Delayed Fluorescence Emitters: Vibronic Coupling and Nonadiabatic Dynamics Analysis
Multiresonance thermally activated delayed fluorescence (MR-TADF) emitters are renowned for their intrinsic narrowband emission characteristics. However, practical MR-TADF materials often exhibit nonnegligible spectral broadening. Herein, we present a theoretical investigation into para-substituted Cz-BDTP derivatives to elucidate how para-substituents modulate vibrational coupling to regulate emission line width and color purity. Systematic studies reveal that para-substitution significantly narrows the singlet–triplet energy gap (ΔEST) by >0.3 eV, thereby markedly enhancing the reverse intersystem crossing (RISC) rate. CB-BDTP-p-Nitro exhibits a RISC rate constant reaching 2.098 × 109 s–1, giving a calculated delayed fluorescence quantum yield (Φd) of 97.04% within the present kinetic model while also showing the broadest adiabatic emission profile in this series with a full width at half-maximum (FWHM) of 45 nm. Through the analysis of Huang–Rhys (HR) factors and fluorescence spectra, we identified the vibrational modes contributing to this broadening. Nonadiabatic dynamics simulations further reveal that substituents modulate the degree of singlet–triplet state mixing on ultrafast time scales. By correlating the electronic structure, vibrational coupling, and nonadiabatic molecular dynamics (NAMD) simulations, this work establishes a physically consistent framework linking molecular structure to emission line width. These findings provide molecular-level guidance for achieving high color purity in MR-TADF emitters through suppression of low-frequency vibrational activation and minimization of excited-state structural relaxation.
- 25 July 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 130 (31) , 6131-6146
Mechanism of Color Purity Regulation in Multiresonance Thermally Activated Delayed Fluorescence Emitters: Vibronic Coupling and Nonadiabatic Dynamics Analysis
Multiresonance thermally activated delayed fluorescence (MR-TADF) emitters are renowned for their intrinsic narrowband emission characteristics. However, practical MR-TADF materials often exhibit nonnegligible spectral broadening. Herein, we present a theoretical investigation into para-substituted Cz-BDTP derivatives to elucidate how para-substituents modulate vibrational coupling to regulate emission line width and color purity. Systematic studies reveal that para-substitution significantly narrows the singlet–triplet energy gap (ΔEST) by >0.3 eV, thereby markedly enhancing the reverse intersystem crossing (RISC) rate. CB-BDTP-p-Nitro exhibits a RISC rate constant reaching 2.098 × 109 s–1, giving a calculated delayed fluorescence quantum yield (Φd) of 97.04% within the present kinetic model while also showing the broadest adiabatic emission profile in this series with a full width at half-maximum (FWHM) of 45 nm. Through the analysis of Huang–Rhys (HR) factors and fluorescence spectra, we identified the vibrational modes contributing to this broadening. Nonadiabatic dynamics simulations further reveal that substituents modulate the degree of singlet–triplet state mixing on ultrafast time scales. By correlating the electronic structure, vibrational coupling, and nonadiabatic molecular dynamics (NAMD) simulations, this work establishes a physically consistent framework linking molecular structure to emission line width. These findings provide molecular-level guidance for achieving high color purity in MR-TADF emitters through suppression of low-frequency vibrational activation and minimization of excited-state structural relaxation.
- 14 March 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 130 (12) , 2544-2557
Theoretical Study on Selective Isotope Substitution Boosting High-Performance Circularly Polarized Delayed Fluorescence (CP-TADF) for Planar-Chiral Emitters
Recently, the isotope effect has emerged as a promising strategy for improving OLED performance. However, a comprehensive theoretical understanding is still lacking to elucidate how isotopic engineering can simultaneously amplify the performance of circularly polarized thermally activated delayed fluorescence (CP-TADF) emitters. Herein, we designed four isotopically substituted isomers (Czp-DiKTa, Czp-DiKTa-18O/D, Czp-DiKTa-D, and Czp-DiKTa-both) by selecting different functional groups based on the resonance Raman (rR) spectroscopic analysis. In the Herzberg-Teller (HT) limit, the kCPL rates of all four isotopic isomers exhibited an enhancement of 3 orders of magnitude over the FC approximation prediction. This enhancement was particularly pronounced in donor-acceptor substituted isomers Czp-DiKTa-18O/D (3.71 × 106 s-1), and Czp-DiKTa-D (2.22 × 106 s-1), accompanied by substantially enhanced circularly polarized luminescence (CPL) dissymmetry factor gCPL factors of 1.96 × 10-1 and 1.21 × 10-1, respectively. Furthermore, by suppressing the nonradiative internal conversion rate kIC rate, isotopic substitution significantly enhances the delayed circularly polarized quantum yield (ΦDCPL) for Czp-DiKTa-18O/D (93%) and Czp-DiKTa-D (91%). In contrast, the donor-acceptor doubly isotope-substituted Czp-DiKTa-both shows no notable improvement (79%). This trend was observed in kIC and gCPL, demonstrating that selective isotope substitution is a promising strategy for boosting device efficiency. These findings provide valuable insights for the rational design of advanced CPL optoelectronic materials.
- 14 March 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 130 (12) , 2544-2557
Theoretical Study on Selective Isotope Substitution Boosting High-Performance Circularly Polarized Delayed Fluorescence (CP-TADF) for Planar-Chiral Emitters
Recently, the isotope effect has emerged as a promising strategy for improving OLED performance. However, a comprehensive theoretical understanding is still lacking to elucidate how isotopic engineering can simultaneously amplify the performance of circularly polarized thermally activated delayed fluorescence (CP-TADF) emitters. Herein, we designed four isotopically substituted isomers (Czp-DiKTa, Czp-DiKTa-18O/D, Czp-DiKTa-D, and Czp-DiKTa-both) by selecting different functional groups based on the resonance Raman (rR) spectroscopic analysis. In the Herzberg-Teller (HT) limit, the kCPL rates of all four isotopic isomers exhibited an enhancement of 3 orders of magnitude over the FC approximation prediction. This enhancement was particularly pronounced in donor-acceptor substituted isomers Czp-DiKTa-18O/D (3.71 × 106 s-1), and Czp-DiKTa-D (2.22 × 106 s-1), accompanied by substantially enhanced circularly polarized luminescence (CPL) dissymmetry factor gCPL factors of 1.96 × 10-1 and 1.21 × 10-1, respectively. Furthermore, by suppressing the nonradiative internal conversion rate kIC rate, isotopic substitution significantly enhances the delayed circularly polarized quantum yield (ΦDCPL) for Czp-DiKTa-18O/D (93%) and Czp-DiKTa-D (91%). In contrast, the donor-acceptor doubly isotope-substituted Czp-DiKTa-both shows no notable improvement (79%). This trend was observed in kIC and gCPL, demonstrating that selective isotope substitution is a promising strategy for boosting device efficiency. These findings provide valuable insights for the rational design of advanced CPL optoelectronic materials.
- 6 February 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (9) , 6056-6068
Rational design of local electric fields: an effective strategy to modulate thermally activated delayed fluorescence in carbene–gold( i )–amide complexes
DFT calculations reveal the effects of electric field design on TADF in carbene–gold( i )–amide complexes and offer effective tuning strategies.
- 6 February 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (9) , 6056-6068
Rational design of local electric fields: an effective strategy to modulate thermally activated delayed fluorescence in carbene–gold( i )–amide complexes
DFT calculations reveal the effects of electric field design on TADF in carbene–gold( i )–amide complexes and offer effective tuning strategies.
- 4 June 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 129 (24) , 5300-5312
Investigating the Mechanism of Thermally Activated Delayed Fluorescence Induced by Different Conformations of a Two-Coordinate Copper(I) Complex
The investigation of thermally activated delayed fluorescence (TADF) in carbene-metal-amide (CMA) complexes reveals that structurally flexible ligands can demonstrate significant TADF characteristics. A series of four conformationally flexible copper(I) complexes featuring cyclic alkyl amino carbene (CAAC) and 10H-phenothiazine-5,5-dioxide (Ptz) ligands were systematically studied using quantum chemical calculations. The study examines the impact of two key structural parameters, namely torsion angle φ (CAAC-Cu(I)-Ptz-1: perpendicular; CAAC-Cu(I)-Ptz-2 and CAAC-Cu(I)-Ptz-3: coplanar; CAAC-Cu(I)-Ptz-4: anticoplanar) and tilt angle β (near-planar arrangement: CAAC-Cu(I)-Ptz-3 > CAAC-Cu(I)-Ptz-2), on the photophysical properties of conformations. Geometrical and excited-state analyses indicate that CAAC-Cu(I)-Ptz-1, CAAC-Cu(I)-Ptz-2, and CAAC-Cu(I)-Ptz-4 conformations are observed to have similar excited-state transitions, but their torsion angles critically influence energy gap variations. Specifically, the energy differences between excited states of CAAC-Cu(I)-Ptz-2 and CAAC-Cu(I)-Ptz-3 are 0.10 and 0.20 eV, respectively, due to distinct torsion spans. Notably, the increased tilt angle β in CAAC-Cu(I)-Ptz-3 diminishes the contribution of Cu, with the lowest triplet state (T1) displaying 47% ligand-to-ligand charge transfer (LLCT) and 28% metal-to-ligand charge transfer (MLCT) character. The combined minimum energy crossing point (MECP) and spin-orbit coupling (SOC) analyses elucidate the effect on reverse intersystem crossing (RISC) rates: CAAC-Cu(I)-Ptz-3 (0.41 eV MECP barrier) and CAAC-Cu(I)-Ptz-1 (SOC = 4.35 cm-1) are confirmed to suppress RISC rates (1.09 × 104 and 1.09 × 108 s-1, respectively), while enhanced RISC rates are achieved through reduced MECP barriers and strengthened SOC interactions by CAAC-Cu(I)-Ptz-2 and CAAC-Cu(I)-Ptz-4 (1.68 × 109 and 3.87 × 109 s-1, respectively). These findings highlight the vital role of ligand flexibility in the photophysical properties of CMA emitters, offering valuable guidance for designing efficient TADF materials.
- 4 June 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 129 (24) , 5300-5312
Investigating the Mechanism of Thermally Activated Delayed Fluorescence Induced by Different Conformations of a Two-Coordinate Copper(I) Complex
The investigation of thermally activated delayed fluorescence (TADF) in carbene-metal-amide (CMA) complexes reveals that structurally flexible ligands can demonstrate significant TADF characteristics. A series of four conformationally flexible copper(I) complexes featuring cyclic alkyl amino carbene (CAAC) and 10H-phenothiazine-5,5-dioxide (Ptz) ligands were systematically studied using quantum chemical calculations. The study examines the impact of two key structural parameters, namely torsion angle φ (CAAC-Cu(I)-Ptz-1: perpendicular; CAAC-Cu(I)-Ptz-2 and CAAC-Cu(I)-Ptz-3: coplanar; CAAC-Cu(I)-Ptz-4: anticoplanar) and tilt angle β (near-planar arrangement: CAAC-Cu(I)-Ptz-3 > CAAC-Cu(I)-Ptz-2), on the photophysical properties of conformations. Geometrical and excited-state analyses indicate that CAAC-Cu(I)-Ptz-1, CAAC-Cu(I)-Ptz-2, and CAAC-Cu(I)-Ptz-4 conformations are observed to have similar excited-state transitions, but their torsion angles critically influence energy gap variations. Specifically, the energy differences between excited states of CAAC-Cu(I)-Ptz-2 and CAAC-Cu(I)-Ptz-3 are 0.10 and 0.20 eV, respectively, due to distinct torsion spans. Notably, the increased tilt angle β in CAAC-Cu(I)-Ptz-3 diminishes the contribution of Cu, with the lowest triplet state (T1) displaying 47% ligand-to-ligand charge transfer (LLCT) and 28% metal-to-ligand charge transfer (MLCT) character. The combined minimum energy crossing point (MECP) and spin-orbit coupling (SOC) analyses elucidate the effect on reverse intersystem crossing (RISC) rates: CAAC-Cu(I)-Ptz-3 (0.41 eV MECP barrier) and CAAC-Cu(I)-Ptz-1 (SOC = 4.35 cm-1) are confirmed to suppress RISC rates (1.09 × 104 and 1.09 × 108 s-1, respectively), while enhanced RISC rates are achieved through reduced MECP barriers and strengthened SOC interactions by CAAC-Cu(I)-Ptz-2 and CAAC-Cu(I)-Ptz-4 (1.68 × 109 and 3.87 × 109 s-1, respectively). These findings highlight the vital role of ligand flexibility in the photophysical properties of CMA emitters, offering valuable guidance for designing efficient TADF materials.
- 21 March 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (13) , 6497-6509
Unraveling the Mechanism of Circularly Polarized Thermally Activated Delayed Fluorescence (CP-TADF) in Chiral Two-Coordinated Cu(I) Emitters: A Comprehensive Theoretical Exploration
The circularly polarized thermally activated delayed fluorescence (CP-TADF) processes of four pairs of Cu(I)-based chiral enantiomers were calculated by employing the path integral approach to dynamics. The calculated results reveal that the introduction of different substituents at various positions on the planar chiral CzP units significantly impacts on the dissymmetry factor gCPL of CP luminescence (CPL). Substituting the sixth position hydrogen on the chiral CzP unit with -CN or -Cl groups increases the gCPL factor to 2.1 × 10-3 and 2.2 × 10-3 in Sp-MAC-Cu-CNCzP-1 and Sp-MAC-Cu-ClCzP, respectively. This is due to a small electric transition dipole moment |μ| and a relatively large magnetic transition dipole moment |m|. The small |μ| results from the CT excitation with spatially separated highest-occupied molecular orbital (HOMO) and lowest-unoccupied molecular orbital (LUMO) transitions in the S1 state, leading to a small ΔE(S1 - T1) and more efficient TADF. Interestingly, the seventh-substituted MAC-Cu-CNCzP-2 complex exhibits a substantial increase in the ΔE(S1 - T1) of 0.346 eV, which consequently leads to a significant decrease in the kRISC rate, down to 3.32 × 103 s-1, indicating that further efficient reverse intersystem crossing (RISC) processes are failed. Thus, to design efficient CP-TADF molecules, the key lies in regulating and balancing the factors affecting both TADF and CPL properties.
- 21 March 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (13) , 6497-6509
Unraveling the Mechanism of Circularly Polarized Thermally Activated Delayed Fluorescence (CP-TADF) in Chiral Two-Coordinated Cu(I) Emitters: A Comprehensive Theoretical Exploration
The circularly polarized thermally activated delayed fluorescence (CP-TADF) processes of four pairs of Cu(I)-based chiral enantiomers were calculated by employing the path integral approach to dynamics. The calculated results reveal that the introduction of different substituents at various positions on the planar chiral CzP units significantly impacts on the dissymmetry factor gCPL of CP luminescence (CPL). Substituting the sixth position hydrogen on the chiral CzP unit with -CN or -Cl groups increases the gCPL factor to 2.1 × 10-3 and 2.2 × 10-3 in Sp-MAC-Cu-CNCzP-1 and Sp-MAC-Cu-ClCzP, respectively. This is due to a small electric transition dipole moment |μ| and a relatively large magnetic transition dipole moment |m|. The small |μ| results from the CT excitation with spatially separated highest-occupied molecular orbital (HOMO) and lowest-unoccupied molecular orbital (LUMO) transitions in the S1 state, leading to a small ΔE(S1 - T1) and more efficient TADF. Interestingly, the seventh-substituted MAC-Cu-CNCzP-2 complex exhibits a substantial increase in the ΔE(S1 - T1) of 0.346 eV, which consequently leads to a significant decrease in the kRISC rate, down to 3.32 × 103 s-1, indicating that further efficient reverse intersystem crossing (RISC) processes are failed. Thus, to design efficient CP-TADF molecules, the key lies in regulating and balancing the factors affecting both TADF and CPL properties.
- Open Access
- 26 July 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (33) , 23987-23999
Deciphering the doublet luminescence mechanism in neutral organic radicals: spin-exchange coupling, reversed-quartet mechanism, excited-state dynamics
Fluorescence spectra and radiation rates (kf, unit in s−1) for the excited D2 state of TTM-1CZ-An at different temperatures.
- 26 July 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (33) , 23987-23999
Open AccessDeciphering the doublet luminescence mechanism in neutral organic radicals: spin-exchange coupling, reversed-quartet mechanism, excited-state dynamics
Fluorescence spectra and radiation rates (kf, unit in s−1) for the excited D2 state of TTM-1CZ-An at different temperatures.
- 9 October 2023
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 57 (1) , 015502
Bare W-based MXenes (WCrC and MoWC) anode with high specific capacity for Li and Mg-ion batteries
The emergence of double transition metal MXenes (DTMs) has addressed the challenges associated with the high molar weight and non-metallic characteristics of early transition metal MXenes. In this study, we investigate the performance of WCrC and MoWC, DTMs, as anodes in Li/Mg-ion batteries (LIBs/MIBs) using first-principles calculations. The synergistic effect between the dual metal terminals is analyzed. Our findings reveal that the W terminal provides good electronic conductivity, while the Mo/Cr terminal reduces the molar mass, leading to enhanced energy density. The theoretical capacitance values are 648.81 mAh g−1 (WCrC anode) and 551.82 mAh g−1 (MoWC anode) in LIB, and 432.54 mAh g−1 (WCrC anode) and 367.88 mAh g−1 (MoWC anode) in MIBs. Both anodes exhibit low diffusion barriers with 0.045 eV for Li and 0.079 eV for Mg. They also maintain structural rigidity throughout the battery cycle. This study highlights the crucial role of the dual metal transition terminal synergistic effect in MXenes, influencing adatom adsorption behavior, reducing molar mass, and lowering diffusion barriers. These results contribute to the advancement of MXene surface engineering and offer valuable insights for battery research.
- 9 October 2023
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 57 (1) , 015502
Bare W-based MXenes (WCrC and MoWC) anode with high specific capacity for Li and Mg-ion batteries
The emergence of double transition metal MXenes (DTMs) has addressed the challenges associated with the high molar weight and non-metallic characteristics of early transition metal MXenes. In this study, we investigate the performance of WCrC and MoWC, DTMs, as anodes in Li/Mg-ion batteries (LIBs/MIBs) using first-principles calculations. The synergistic effect between the dual metal terminals is analyzed. Our findings reveal that the W terminal provides good electronic conductivity, while the Mo/Cr terminal reduces the molar mass, leading to enhanced energy density. The theoretical capacitance values are 648.81 mAh g−1 (WCrC anode) and 551.82 mAh g−1 (MoWC anode) in LIB, and 432.54 mAh g−1 (WCrC anode) and 367.88 mAh g−1 (MoWC anode) in MIBs. Both anodes exhibit low diffusion barriers with 0.045 eV for Li and 0.079 eV for Mg. They also maintain structural rigidity throughout the battery cycle. This study highlights the crucial role of the dual metal transition terminal synergistic effect in MXenes, influencing adatom adsorption behavior, reducing molar mass, and lowering diffusion barriers. These results contribute to the advancement of MXene surface engineering and offer valuable insights for battery research.
- 19 September 2023
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 47 (41) , 18972-18982
Spin–orbit charge transfer intersystem crossing and thermal activation delayed fluorescence (TADF) studies of compact orthogonal anthraquinone phenothiazine derivatives
Thermally activated delayed fluorescence (TADF) in compact electron donor–acceptor dyads has attracted great attention due to their potential application in organic light-emitting diodes. However, the lack of understanding of the microscopic mechanisms of this phenomenon hinders the design strategies for effective TADF materials. In this work, we systematically compared the TADF mechanism of three compact dyads with those of electron donor phenothiazine (PTZ) and acceptor anthraquinone (AQ) directly connected by a single C–N bond (AQ-PTZ, AQ-PTZ-O, and AQ-PTZ-O2) by means of quantum chemical calculations in conjunction with electron paramagnetic resonance (EPR) spectroscopy. It turns out that three targeted molecules for TADF are identified depending on the relative energy positions of the charge-transfer excited states, 1CT/3CT, and the local triplet state, 3LE states. In most TADF-active molecules, AQ-PTZ-O and AQ-PTZ-O2, the structure deformation of excited states is suppressed by oxidation of the PTZ unit, leading to a small relaxation energy and a reverse intersystem crossing (RISC) energy barrier, as well as 3LE being on-resonance with the CT states, thus resulting in high efficiency RISC. Analyses of the electron paramagnetic resonance (EPR) parameters have confirmed that the electron spin polarized (ESP) patterns of T1(1LE) for AQ-PTZ-O and AQ-PTZ-O2 are AEAEAE (A, absorption; E, emission) with a preferential population of Tx and Tz, which is characteristic of ISC mediated by SOC interactions. Namely, the primary population mechanism of the singlet excited state is spin–orbit charge-transfer RISC due to the presence of a perpendicular π system. Their D values are expected to be positive, and display a more “disk-like” spin density distribution with an oblate shape; the calculated RISC rates also support these views. These results provide new gateways for designing effective TADF materials and studying TADF mechanisms.
- 19 September 2023
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 47 (41) , 18972-18982
Spin–orbit charge transfer intersystem crossing and thermal activation delayed fluorescence (TADF) studies of compact orthogonal anthraquinone phenothiazine derivatives
Thermally activated delayed fluorescence (TADF) in compact electron donor–acceptor dyads has attracted great attention due to their potential application in organic light-emitting diodes. However, the lack of understanding of the microscopic mechanisms of this phenomenon hinders the design strategies for effective TADF materials. In this work, we systematically compared the TADF mechanism of three compact dyads with those of electron donor phenothiazine (PTZ) and acceptor anthraquinone (AQ) directly connected by a single C–N bond (AQ-PTZ, AQ-PTZ-O, and AQ-PTZ-O2) by means of quantum chemical calculations in conjunction with electron paramagnetic resonance (EPR) spectroscopy. It turns out that three targeted molecules for TADF are identified depending on the relative energy positions of the charge-transfer excited states, 1CT/3CT, and the local triplet state, 3LE states. In most TADF-active molecules, AQ-PTZ-O and AQ-PTZ-O2, the structure deformation of excited states is suppressed by oxidation of the PTZ unit, leading to a small relaxation energy and a reverse intersystem crossing (RISC) energy barrier, as well as 3LE being on-resonance with the CT states, thus resulting in high efficiency RISC. Analyses of the electron paramagnetic resonance (EPR) parameters have confirmed that the electron spin polarized (ESP) patterns of T1(1LE) for AQ-PTZ-O and AQ-PTZ-O2 are AEAEAE (A, absorption; E, emission) with a preferential population of Tx and Tz, which is characteristic of ISC mediated by SOC interactions. Namely, the primary population mechanism of the singlet excited state is spin–orbit charge-transfer RISC due to the presence of a perpendicular π system. Their D values are expected to be positive, and display a more “disk-like” spin density distribution with an oblate shape; the calculated RISC rates also support these views. These results provide new gateways for designing effective TADF materials and studying TADF mechanisms.
- 2 February 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (7) , 5743-5757
Grape bunches of novel conjugated chain bonded fullerene oligomers: design of a potential electron trap carbonaceous molecular material
A series of novel conjugated chain bonded fullerene C60 oligomers (CBFOs) with a well-defined nano-architecture and excellent electron-accepting ability are designed based on fullerene carbenes by means of theoretical calculations.
- 2 February 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (7) , 5743-5757
Grape bunches of novel conjugated chain bonded fullerene oligomers: design of a potential electron trap carbonaceous molecular material
A series of novel conjugated chain bonded fullerene C60 oligomers (CBFOs) with a well-defined nano-architecture and excellent electron-accepting ability are designed based on fullerene carbenes by means of theoretical calculations.
- 15 September 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 126 (38) , 6695-6709
Intrinsic Analysis of Thermally Activated Delayed Fluorescence (TADF) for Ag(I) Complex Based on the Path Integral Approach: Origin of the Effective Spin-Flipping Channel and Vibrational Spin-Orbit Coupling Effect
In order to design new Ag(I)-based materials for thermally activated delayed fluorescence (TADF), it is vital to develop a detailed understanding of the current best performing materials. The quantitative predictions of the photophysical processes of the Ag(dmp)(P2-nCB) TADF complex are calculated using time-dependent density functional theory (TD-DFT) combined with the path integral approach for dynamics including the Herzberg-Teller effects. All calculated results are in good agreement with the experimentally available data, demonstrating the validity of our applied theoretical approach. Analysis of ETS-NOCV (extended transition state natural orbital for chemical valence) shows that there is a weak bond interaction dominated by electrostatic interactions and accompanied by some covalent components between Ag(I) and dmp ligands due to the introduction of the strongly electron-donating negatively charged P2-nCB ligand, thus giving a small energy separation between the lowest singlet S1 and triplet T1 states of ΔE(S1 - T1) ≈ 532 cm-1. The SOC strongly depends on the geometrical alteration caused by the molecular "promotion" vibrations. Our study has revealed that a few "promotion" vibrational modes, that is, ω46 and ω227, effectively induce the strong SOC between S1 and T1 and speed up the reverse intersystem crossing (RISC) process dramatically. The computed kRISC value is 1.19 × 107 s-1 for the solid phase at 300 K, which are about 5 orders of magnitude larger than the mean phosphorescence rate, kP = 9.56 × 102 s-1, and it is also far larger than ISC k0ISC = 7.84 × 102 s-1 rates from T1 to S0. The S1 state thus can be an efficient thermal repopulation from the T1 state by the RISC pathway. Finally, we also note that the diabatic vibration coupling triplet pair T1/T2 will also be important for efficient and practical RISC. Our investigation will be of great utility toward designing and improving the Ag(I)-based TADF complexes.
- 15 September 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 126 (38) , 6695-6709
Intrinsic Analysis of Thermally Activated Delayed Fluorescence (TADF) for Ag(I) Complex Based on the Path Integral Approach: Origin of the Effective Spin-Flipping Channel and Vibrational Spin-Orbit Coupling Effect
In order to design new Ag(I)-based materials for thermally activated delayed fluorescence (TADF), it is vital to develop a detailed understanding of the current best performing materials. The quantitative predictions of the photophysical processes of the Ag(dmp)(P2-nCB) TADF complex are calculated using time-dependent density functional theory (TD-DFT) combined with the path integral approach for dynamics including the Herzberg-Teller effects. All calculated results are in good agreement with the experimentally available data, demonstrating the validity of our applied theoretical approach. Analysis of ETS-NOCV (extended transition state natural orbital for chemical valence) shows that there is a weak bond interaction dominated by electrostatic interactions and accompanied by some covalent components between Ag(I) and dmp ligands due to the introduction of the strongly electron-donating negatively charged P2-nCB ligand, thus giving a small energy separation between the lowest singlet S1 and triplet T1 states of ΔE(S1 - T1) ≈ 532 cm-1. The SOC strongly depends on the geometrical alteration caused by the molecular "promotion" vibrations. Our study has revealed that a few "promotion" vibrational modes, that is, ω46 and ω227, effectively induce the strong SOC between S1 and T1 and speed up the reverse intersystem crossing (RISC) process dramatically. The computed kRISC value is 1.19 × 107 s-1 for the solid phase at 300 K, which are about 5 orders of magnitude larger than the mean phosphorescence rate, kP = 9.56 × 102 s-1, and it is also far larger than ISC k0ISC = 7.84 × 102 s-1 rates from T1 to S0. The S1 state thus can be an efficient thermal repopulation from the T1 state by the RISC pathway. Finally, we also note that the diabatic vibration coupling triplet pair T1/T2 will also be important for efficient and practical RISC. Our investigation will be of great utility toward designing and improving the Ag(I)-based TADF complexes.