Zhiyong Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhiyong Yang has a total of 177 co-authors. Here are the top co-authors by number of shared publications:
- Zhenguo Chi
Wuyi University
36 shared publications Juan Zhao
Wuyi University
15 shared publications- Yi Zhang
Sun Yat-sen University
13 shared publications Faxu Lin
School of Materials Science and Engineering
12 shared publicationsZhenguo Chi
Key Laboratory for Polymeric Composite & Functional Materials of Ministry of Education, Guangdong Engineering Technology Research Center for High-performance Organic and Polymer Photoelectric Functional Films, Guangdong Basic Research Center of Excellence (GBRCE) for Functional Molecular Engineering, School of Chemistry, Sun Yat-sen University, Guangzhou, China
10 shared publications- Huahua Huang
School of Materials Science and Engineering
9 shared publications
Latest Publications
- 12 November 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Molecular Mechanophores Based on Stress-Enhanced Exciton Transition between Phosphorescent Probes and Polymer Matrix
Mechanophores provide an in situ and remote tool for quantifying invisible stress in polymers by photonic signals, offering distinct advantages for stress distribution analysis of large-area surfaces and instrument-free stress observation. However, achieving an ideal mechanophore that integrates with sensitive, reversible, and molecular-level stress sensing is attractive yet challenging. Here, we report practical guidance for developing ideal mechanophores that promote the molecular probe’s exciton transition for room-temperature phosphorescence (RTP) under stress, through the “assisted lowest triplet (T1) state” of the adjacent polymer chain. Systematic analyses of numerous organic probes reveal that a small energy gap (ΔEM < 0.4 eV) between the probe’s lowest singlet (S1) and the polymer’s T1 states is an empirical guideline for stress-enhanced RTP. The probe-doped polymer system demonstrates not only a remarkable increase in RTP intensity of over 2000-fold upon 160 MPa but also a low stress threshold of ∼2 MPa, which is robust under 0–10 MPa cyclic pressure loading/unloading over 500 cycles. Such RTP mechanophores enable noninvasive, reversible, and molecular-level stress detection in polymers. Their doped polymers have shown potential applications in various fields for real-time sensing of stress and its uneven distribution through visual afterglow.
- 12 November 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Molecular Mechanophores Based on Stress-Enhanced Exciton Transition between Phosphorescent Probes and Polymer Matrix
Mechanophores provide an in situ and remote tool for quantifying invisible stress in polymers by photonic signals, offering distinct advantages for stress distribution analysis of large-area surfaces and instrument-free stress observation. However, achieving an ideal mechanophore that integrates with sensitive, reversible, and molecular-level stress sensing is attractive yet challenging. Here, we report practical guidance for developing ideal mechanophores that promote the molecular probe’s exciton transition for room-temperature phosphorescence (RTP) under stress, through the “assisted lowest triplet (T1) state” of the adjacent polymer chain. Systematic analyses of numerous organic probes reveal that a small energy gap (ΔEM < 0.4 eV) between the probe’s lowest singlet (S1) and the polymer’s T1 states is an empirical guideline for stress-enhanced RTP. The probe-doped polymer system demonstrates not only a remarkable increase in RTP intensity of over 2000-fold upon 160 MPa but also a low stress threshold of ∼2 MPa, which is robust under 0–10 MPa cyclic pressure loading/unloading over 500 cycles. Such RTP mechanophores enable noninvasive, reversible, and molecular-level stress detection in polymers. Their doped polymers have shown potential applications in various fields for real-time sensing of stress and its uneven distribution through visual afterglow.
- 27 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (30) , 41366-41374
High-Performance Sky-Blue Hyperfluorescence Organic Light-Emitting Diodes Enabled by Efficient Thermally Activated Delayed Fluorescence Sensitizers with Suppressed Efficiency Roll-Off
High-performance blue emitters remain a major bottleneck for next-generation organic light-emitting diode (OLED) displays. Although multiresonance thermally activated delayed fluorescence (MR-TADF) materials offer exceptional color purity, their practical use is often limited by slow reverse intersystem crossing (RISC), leading to triplet accumulation, efficiency roll-off, and device degradation. Here, we report three aggregation-induced emission TADF emitters (23PalCBP, 23PclCBP, and 32PclCBP) constructed from indolocarbazole donors and a benzophenone acceptor. Among them, 32PclCBP exhibits a very small singlet−triplet energy gap (ΔEST = 0.01 eV) and a high photoluminescence quantum yield (PLQY) of 0.88 in doped films, affording OLEDs with a maximum external quantum efficiency (EQEmax) of 29.3%. When employed as sensitizers in hyperfluorescence (HF) devices with the MR-TADF emitter BNMIPAPh, both sensitized systems deliver narrowband blue emission with a full width at half-maximum of 27 nm. The 32PclCBP-sensitized device achieves a balanced performance with an EQEmax of 28.6% and a substantially reduced efficiency roll-off of 22.7% at 1000 cd m−2, together with modestly improved operational stability relative to the nonsensitized MR-TADF reference. In comparison, the 23PalCBP-sensitized device affords a higher EQEmax of 30.9%, albeit with a larger efficiency roll-off of 31.1%. These results demonstrate that the synergistic optimization of multiple photophysical parameters, including high PLQY, low nonradiative decay, small ΔEST, and moderate RISC kinetics, enables efficient, high-color-purity, and low-roll-off sky-blue HF OLEDs.
- 27 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (30) , 41366-41374
High-Performance Sky-Blue Hyperfluorescence Organic Light-Emitting Diodes Enabled by Efficient Thermally Activated Delayed Fluorescence Sensitizers with Suppressed Efficiency Roll-Off
High-performance blue emitters remain a major bottleneck for next-generation organic light-emitting diode (OLED) displays. Although multiresonance thermally activated delayed fluorescence (MR-TADF) materials offer exceptional color purity, their practical use is often limited by slow reverse intersystem crossing (RISC), leading to triplet accumulation, efficiency roll-off, and device degradation. Here, we report three aggregation-induced emission TADF emitters (23PalCBP, 23PclCBP, and 32PclCBP) constructed from indolocarbazole donors and a benzophenone acceptor. Among them, 32PclCBP exhibits a very small singlet−triplet energy gap (ΔEST = 0.01 eV) and a high photoluminescence quantum yield (PLQY) of 0.88 in doped films, affording OLEDs with a maximum external quantum efficiency (EQEmax) of 29.3%. When employed as sensitizers in hyperfluorescence (HF) devices with the MR-TADF emitter BNMIPAPh, both sensitized systems deliver narrowband blue emission with a full width at half-maximum of 27 nm. The 32PclCBP-sensitized device achieves a balanced performance with an EQEmax of 28.6% and a substantially reduced efficiency roll-off of 22.7% at 1000 cd m−2, together with modestly improved operational stability relative to the nonsensitized MR-TADF reference. In comparison, the 23PalCBP-sensitized device affords a higher EQEmax of 30.9%, albeit with a larger efficiency roll-off of 31.1%. These results demonstrate that the synergistic optimization of multiple photophysical parameters, including high PLQY, low nonradiative decay, small ΔEST, and moderate RISC kinetics, enables efficient, high-color-purity, and low-roll-off sky-blue HF OLEDs.
- Open Access
- 29 May 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (51) , e76164
Processing‐History‐Programmed Silk Fibers Integrating Mechanical Robustness, Ionic Conduction, and Optical Waveguiding for Intelligent Wearables
Soft fibrous materials that integrate mechanical robustness with efficient electrical and optical signal transport are highly desirable for intelligent wearables, yet remain challenging due to the intrinsic trade‐off between structural reinforcement and functional transport. Here, inspired by natural silk spinning, we introduce a processing‐history programming strategy that exploits the controlled coupling of humidity, stretching, and dehydration to encode multifunctionality into silk‐based fibers without chemical modification. Through a humidity‐assisted stretching‐mediated spinning (SMS) pathway, hierarchical structural reconstruction is synchronously induced, featuring enhanced β‐sheet formation, increased axial orientation, and a radially graded architecture, which together lead to orders‐of‐magnitude improvements in strength, modulus, and toughness. Importantly, the mechanically reinforced fibers preserve continuous ionic transport pathways and exhibit stable electromechanical responses, while also functioning as visible‐light waveguides with optical transmission. By integrating multimodal electrical and optical signals with on‐device machine learning, the fibers enable real‐time decoding of human motion states and sweat electrolyte concentrations, establishing processing‐history programming as a general paradigm for designing multifunctional fibrous electronics and intelligent textiles.
- 29 May 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (51) , e76164
Open AccessProcessing‐History‐Programmed Silk Fibers Integrating Mechanical Robustness, Ionic Conduction, and Optical Waveguiding for Intelligent Wearables
Soft fibrous materials that integrate mechanical robustness with efficient electrical and optical signal transport are highly desirable for intelligent wearables, yet remain challenging due to the intrinsic trade‐off between structural reinforcement and functional transport. Here, inspired by natural silk spinning, we introduce a processing‐history programming strategy that exploits the controlled coupling of humidity, stretching, and dehydration to encode multifunctionality into silk‐based fibers without chemical modification. Through a humidity‐assisted stretching‐mediated spinning (SMS) pathway, hierarchical structural reconstruction is synchronously induced, featuring enhanced β‐sheet formation, increased axial orientation, and a radially graded architecture, which together lead to orders‐of‐magnitude improvements in strength, modulus, and toughness. Importantly, the mechanically reinforced fibers preserve continuous ionic transport pathways and exhibit stable electromechanical responses, while also functioning as visible‐light waveguides with optical transmission. By integrating multimodal electrical and optical signals with on‐device machine learning, the fibers enable real‐time decoding of human motion states and sweat electrolyte concentrations, establishing processing‐history programming as a general paradigm for designing multifunctional fibrous electronics and intelligent textiles.
- 27 May 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (27) , 12025-12032
Efficient doped and non-doped OLEDs based on a deep-blue HLCT material and all-HLCT WOLEDs with standard white-light emission
Blue and orange HLCT materials ( CzPyPPI and BTPA4 ) are developed. CzPyPPI enables OLED with deep-blue emission (CIE y =0.063). An all-HLCT WOLED yields near-standard white light with an EQE max of 6.86% and low efficiency roll-off.
- 27 May 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (27) , 12025-12032
Efficient doped and non-doped OLEDs based on a deep-blue HLCT material and all-HLCT WOLEDs with standard white-light emission
Blue and orange HLCT materials ( CzPyPPI and BTPA4 ) are developed. CzPyPPI enables OLED with deep-blue emission (CIE y =0.063). An all-HLCT WOLED yields near-standard white light with an EQE max of 6.86% and low efficiency roll-off.
- 16 April 2026
- Published by Elsevier in Dyes and Pigments
- Vol. 252
Tuning n-π spatial arrangement in benzo[c]phenanthrene derivatives for enhancing phosphorescence in polymeric systems
- 16 April 2026
- Published by Elsevier in Dyes and Pigments
- Vol. 252
Tuning n-π spatial arrangement in benzo[c]phenanthrene derivatives for enhancing phosphorescence in polymeric systems
- 7 October 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (41) , 10712-10719
Circularly Polarized Organic Long-Persistent Luminescence from Chiral Binaphthyl Guests
Organic long-persistent luminescence (OLPL) materials with circularly polarized luminescence (CPL) characteristics remain a challenge in spite of their advanced luminescence and broadened applications. Herein, two pairs of axially chiral molecules were designed and doped as guest into the poly(ethylene glycol terephthalate) (PET), achieving the first examples of CPL-OLPL systems. The (R/S)-BINAC guests, featuring unlocked chiral binaphthyl backbones combined with phenyl-carbazole moieties, possessed not only higher intersystem crossing (ISC) efficiencies for triplet excitons' generation but also lower triplet states than PET to prevent triplet excitons' quenching. The OLPL systems containing (R/S)-BINAC thus exhibit a dissymmetry factor (glum) of 10-3, higher phosphorescence efficiency (Φp) of 12.8%, and longer lifetime of 4000 s (>1 h). Additionally, the OLPL characteristics were also successfully extended into the near-infrared (NIR) region by codoping with an NIR dye via a Förster resonance energy transfer (FRET) strategy. This work provides a framework for developing CPL-OLPL systems through a careful design of chiral molecular guests, which can extend the characteristic and the application scope of both OLPL and CPL.
- 7 October 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (41) , 10712-10719
Circularly Polarized Organic Long-Persistent Luminescence from Chiral Binaphthyl Guests
Organic long-persistent luminescence (OLPL) materials with circularly polarized luminescence (CPL) characteristics remain a challenge in spite of their advanced luminescence and broadened applications. Herein, two pairs of axially chiral molecules were designed and doped as guest into the poly(ethylene glycol terephthalate) (PET), achieving the first examples of CPL-OLPL systems. The (R/S)-BINAC guests, featuring unlocked chiral binaphthyl backbones combined with phenyl-carbazole moieties, possessed not only higher intersystem crossing (ISC) efficiencies for triplet excitons' generation but also lower triplet states than PET to prevent triplet excitons' quenching. The OLPL systems containing (R/S)-BINAC thus exhibit a dissymmetry factor (glum) of 10-3, higher phosphorescence efficiency (Φp) of 12.8%, and longer lifetime of 4000 s (>1 h). Additionally, the OLPL characteristics were also successfully extended into the near-infrared (NIR) region by codoping with an NIR dye via a Förster resonance energy transfer (FRET) strategy. This work provides a framework for developing CPL-OLPL systems through a careful design of chiral molecular guests, which can extend the characteristic and the application scope of both OLPL and CPL.
- 26 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (10) , 15177-15186
Polylactic Acid (PLA)-Based Persistent Room-Temperature Phosphorescence Polymer Nanoparticles for Bioimaging
Recent advancements have focused on developing nanoscale persistent room-temperature phosphorescence (pRTP) structures to expand their applicability in biomedical fields. Traditional fabrication methods typically produce surface-coated core-shell pRTP nanoparticles composed of nonbiocompatible pRTP emitters at very high concentrations in the core. To overcome this limitation, polymeric pRTP nanosystems have been presented in this study as a promising alternative by embedding RTP molecules within the biocompatible polymer matrix, thereby significantly reducing the required concentration of RTP molecules. These polymer nanoparticles were fabricated using a biocompatible poly(lactic acid) (PLA) matrix by an effective microemulsion-based method. They exhibited similar pRTP properties to the traditional nanoparticles, showing comparable long-lasting phosphorescence with a lifetime of 118 ms even when the phosphorescent molecule content is below 2%. Moreover, the pRTP polymer nanoparticles with excellent biocompatibility and stability demonstrate interesting reversible photoactivated pRTP properties. They have been successfully applied for in vivo imaging with a high signal-to-noise ratio (SBR) of 2061, maintaining strong and long-lived phosphorescent emissions even for 20 min. These results highlight a viable approach to advancing the pRTP technology for biological applications.
- 26 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (10) , 15177-15186
Polylactic Acid (PLA)-Based Persistent Room-Temperature Phosphorescence Polymer Nanoparticles for Bioimaging
Recent advancements have focused on developing nanoscale persistent room-temperature phosphorescence (pRTP) structures to expand their applicability in biomedical fields. Traditional fabrication methods typically produce surface-coated core-shell pRTP nanoparticles composed of nonbiocompatible pRTP emitters at very high concentrations in the core. To overcome this limitation, polymeric pRTP nanosystems have been presented in this study as a promising alternative by embedding RTP molecules within the biocompatible polymer matrix, thereby significantly reducing the required concentration of RTP molecules. These polymer nanoparticles were fabricated using a biocompatible poly(lactic acid) (PLA) matrix by an effective microemulsion-based method. They exhibited similar pRTP properties to the traditional nanoparticles, showing comparable long-lasting phosphorescence with a lifetime of 118 ms even when the phosphorescent molecule content is below 2%. Moreover, the pRTP polymer nanoparticles with excellent biocompatibility and stability demonstrate interesting reversible photoactivated pRTP properties. They have been successfully applied for in vivo imaging with a high signal-to-noise ratio (SBR) of 2061, maintaining strong and long-lived phosphorescent emissions even for 20 min. These results highlight a viable approach to advancing the pRTP technology for biological applications.
- Open Access
- 20 November 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (1) , 156-162
An effective design strategy for thermally activated delayed fluorescence emitters with aggregation-induced emission to enable sky-blue OLEDs that achieve an EQE of nearly 30%
Efficient indolocarbazole based blue thermally activated delayed fluorescence emitters with aggregation-induced emission are presented, affording OLEDs with a high external quantum efficiency of 29.9%.
- 20 November 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (1) , 156-162
Open AccessAn effective design strategy for thermally activated delayed fluorescence emitters with aggregation-induced emission to enable sky-blue OLEDs that achieve an EQE of nearly 30%
Efficient indolocarbazole based blue thermally activated delayed fluorescence emitters with aggregation-induced emission are presented, affording OLEDs with a high external quantum efficiency of 29.9%.
- 28 October 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (50) , e2409642
In Situ Reversible and Robust Mechano‐Responsive Ultralong Phosphorescence of Polyurethane Elastomer
Though mechano‐responsive luminescent materials obtained much attention, most of their responses are non‐reversible, let alone in situ reversible. Here, the study presents a new strategy to push through this limitation for their applications, which relies on the reversible mechano‐responsive (MR) hydrogen bonding interactions and polymer chain orientation among a doped polyurethane (PU) elastomer. The radiative and nonradiative transitions inside these phosphorescent triphenylene‐based aromatic secondary amines (TpNP and TpNPO) doped in the PU matrix can be accordingly modulated by these MR variations, including the PU chains orientation and the interactions between emitters and PU, respectively. Surprisingly, the intensities, quantum yields, and even lifetimes of their ultralong phosphorescence correlate well with the stress of PU, showing triple mechano‐enhancement with a small threshold value of 7.9 MPa. Importantly, these in situ and rapidly reversible MR phosphorescences possess excellent repeatability, which is still displayed even after >500 cycles of loading/unloading. Based on such a robust and highly sensitive MR afterglow, these PU materials have been demonstrated applications with no interruption of background in several fields, including micro‐crack detection, material damage prediction, limb movement monitoring, and information encryption. This work provides new insights for developing innovative ultralong phosphorescence materials with improved luminescence and reversible mechano‐responsive behavior.
- 28 October 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (50) , e2409642
In Situ Reversible and Robust Mechano‐Responsive Ultralong Phosphorescence of Polyurethane Elastomer
Though mechano‐responsive luminescent materials obtained much attention, most of their responses are non‐reversible, let alone in situ reversible. Here, the study presents a new strategy to push through this limitation for their applications, which relies on the reversible mechano‐responsive (MR) hydrogen bonding interactions and polymer chain orientation among a doped polyurethane (PU) elastomer. The radiative and nonradiative transitions inside these phosphorescent triphenylene‐based aromatic secondary amines (TpNP and TpNPO) doped in the PU matrix can be accordingly modulated by these MR variations, including the PU chains orientation and the interactions between emitters and PU, respectively. Surprisingly, the intensities, quantum yields, and even lifetimes of their ultralong phosphorescence correlate well with the stress of PU, showing triple mechano‐enhancement with a small threshold value of 7.9 MPa. Importantly, these in situ and rapidly reversible MR phosphorescences possess excellent repeatability, which is still displayed even after >500 cycles of loading/unloading. Based on such a robust and highly sensitive MR afterglow, these PU materials have been demonstrated applications with no interruption of background in several fields, including micro‐crack detection, material damage prediction, limb movement monitoring, and information encryption. This work provides new insights for developing innovative ultralong phosphorescence materials with improved luminescence and reversible mechano‐responsive behavior.
- 22 October 2024
- Published by Springer Nature in Science China Chemistry
- Vol. 68 (2) , 754-762
Dual-functional additive of cesium ion for achieving ultrahigh efficiency of persistent phosphorescence in existing polymer-based materials
- 22 October 2024
- Published by Springer Nature in Science China Chemistry
- Vol. 68 (2) , 754-762
Dual-functional additive of cesium ion for achieving ultrahigh efficiency of persistent phosphorescence in existing polymer-based materials