Masud Rana
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Masud Rana has a total of 71 co-authors. Here are the top co-authors by number of shared publications:
- Bin Luo
The University of Queensland
9 shared publications - Ian R. Gentle
Centre for Organic Photonics & Electronics School of Chemistry and Molecular Biosciences The University of Queensland Brisbane QLD 4072 Australia
7 shared publications - Tanveer Saleh
International Islamic University Malaysia (IIUM)
7 shared publications - Asan Gani Abdul Muthalif
Department of Mechanical and Industrial Engineering, Qatar University, Doha, Qatar
6 shared publications - Ruth Knibbe
University of Queensland, Brisbane, Australia
5 shared publications - Lingbing Ran
School of Mechanical and Mining Engineering University of Queensland
4 shared publications
Latest Publications
- Open Access
- 16 July 2026
- Published by Scilight Press Pty Ltd in Aquatic Life and Ecosystems
- Vol. 2 (3) , 12
Optimizing River Productivity: Comparative Insights into Ecological Integrity and Production Responses to River-Based Cage Fish Farming
Cage culture systems in diverse aquatic habitats represent an emerging approach in aquaculture, but they face multiple challenges, including water quality management. The purpose of this study was to examine changes in biological and physicochemical water quality over 180 days in the Tangon River, Bangladesh, resulting from cage fish farming compared with open water. Oreochromis niloticus fingerlings were stocked in distinct cages with two diverse stocking densities (treatments): 25 fish/m3 (T I) and 35 fish/m3 (T II), while the non-cage farming site was treated as the control for the study. The study confirmed that the control and treatment sites had differing water quality. There were 67 different genera of plankton identified in the cages at the farming locations, compared to 44 at the control site. Cage farming site has a far higher total plankton count than the control site with total plankton mean values of 23.95 ± 7.41 × 103 cells/L in cage farming sites and 20.82 ± 7.00 × 103 cells/L in control sites. Cage farming sites exhibited higher mean plankton abundance than the control site; however, significant differences were detected primarily in Cyanophyceae, Copepoda and total zooplankton abundance, suggesting localized ecological responses rather than widespread ecosystem alteration. Overall, it was shown that Treatment I outperformed Treatment II in terms of fish biomass production and survival rate, suggesting that increased densities have a detrimental effect on growth.
- 16 July 2026
- Published by Scilight Press Pty Ltd in Aquatic Life and Ecosystems
- Vol. 2 (3) , 12
Open AccessOptimizing River Productivity: Comparative Insights into Ecological Integrity and Production Responses to River-Based Cage Fish Farming
Cage culture systems in diverse aquatic habitats represent an emerging approach in aquaculture, but they face multiple challenges, including water quality management. The purpose of this study was to examine changes in biological and physicochemical water quality over 180 days in the Tangon River, Bangladesh, resulting from cage fish farming compared with open water. Oreochromis niloticus fingerlings were stocked in distinct cages with two diverse stocking densities (treatments): 25 fish/m3 (T I) and 35 fish/m3 (T II), while the non-cage farming site was treated as the control for the study. The study confirmed that the control and treatment sites had differing water quality. There were 67 different genera of plankton identified in the cages at the farming locations, compared to 44 at the control site. Cage farming site has a far higher total plankton count than the control site with total plankton mean values of 23.95 ± 7.41 × 103 cells/L in cage farming sites and 20.82 ± 7.00 × 103 cells/L in control sites. Cage farming sites exhibited higher mean plankton abundance than the control site; however, significant differences were detected primarily in Cyanophyceae, Copepoda and total zooplankton abundance, suggesting localized ecological responses rather than widespread ecosystem alteration. Overall, it was shown that Treatment I outperformed Treatment II in terms of fish biomass production and survival rate, suggesting that increased densities have a detrimental effect on growth.
- 16 November 2024
- Published by Springer Nature
- p. 81-93
Managing Natural Resources Through Innovation: The Importance of Sustainable IoT-Based Models—The Smart Solar Dryer
- 16 November 2024
- Published by Springer Nature
- p. 81-93
Managing Natural Resources Through Innovation: The Importance of Sustainable IoT-Based Models—The Smart Solar Dryer
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (3) , 636
(Digital Presentation) Innovative Cylindrical Cell Design for Sustainable Static Zinc-Bromine Battery Technology
Zinc-bromine flow batteries (ZBFBs) are suitable for large-scale stationary energy storage applications due to their scalability, flexibility, safety, and sustainability [1, 2]. However, the ZBFBs' efficiency is compromised by the heavy accessories and pumps involved in flowing electrolytes on the electrode surface [3]. Because of their heavy weight and other accessories, ZBFBs can only be used for large energy storage systems. Further research is required to expand the application fields of the small-scale static zinc-bromine battery, including portable applications. Therefore, we proposed an innovative cylindrical cell design for a static zinc-bromine battery with a non-flowing liquid electrolyte that offers substantial improvements over existing zinc-bromine flow battery technology. This design aims to enhance coulombic efficiency and energy density, particularly targeting portable applications such as electric vehicles and E-bikes. Our battery configuration involves electrodes (carbon felt and carbon sponge) separated by a microporous separator for ionic migration. The liquid electrolyte, comprising zinc bromide, zinc chloride, potassium chloride, and 1-ethyl-1-methyl pyrrolidinium bromide, facilitates the electrochemical reaction. The battery's electrochemical process involves the plating of zinc ions at the anode and the formation of a bromine complex at the cathode during charging, with reverse reactions during discharge. The entire proposed static battery configuration is made of recyclable Polytetrafluoroethylene (PTFE) polymer, ensuring environmental sustainability. The anode comprises highly conductive graphene-coated carbon felt, while the cathode employs a graphene-coated high-surface-area carbon fiber sponge. Here, we aim to provide more details on the manufacturing methods for the assembly, emphasizing slurry preparation, electrode modification, and electrolyte concentration to achieve enhanced battery performance. With 96 % coulombic efficiency and stable cyclability, the present technology outperforms the existing commercial zinc-bromine battery. Comparative analyses with conventional zinc-bromine flow batteries highlight the advantages of this static battery, including its compactness, reduced weight, and potential for higher energy density. This research represents a significant step towards developing static zinc-bromine batteries suitable for widespread use in portable applications, surpassing the limitations of current zinc-bromine battery technologies. References: Rana, M., et al., Scientific issues of zinc-bromine flow batteries and mitigation strategies. Exploration. n/a(n/a): p. 20220073. Rajarathnam, G.P. and A.M. Vassallo, The Zinc/Bromine Flow Battery: Materials Challenges and Practical Solutions for Technology Advancement. 2016: Springer. Alghamdi, N.S., et al., Zinc–Bromine Rechargeable Batteries: From Device Configuration, Electrochemistry, Material to Performance Evaluation. Nano-Micro Letters, 2023. 15(1): p. 209.
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (3) , 636
(Digital Presentation) Innovative Cylindrical Cell Design for Sustainable Static Zinc-Bromine Battery Technology
Zinc-bromine flow batteries (ZBFBs) are suitable for large-scale stationary energy storage applications due to their scalability, flexibility, safety, and sustainability [1, 2]. However, the ZBFBs' efficiency is compromised by the heavy accessories and pumps involved in flowing electrolytes on the electrode surface [3]. Because of their heavy weight and other accessories, ZBFBs can only be used for large energy storage systems. Further research is required to expand the application fields of the small-scale static zinc-bromine battery, including portable applications. Therefore, we proposed an innovative cylindrical cell design for a static zinc-bromine battery with a non-flowing liquid electrolyte that offers substantial improvements over existing zinc-bromine flow battery technology. This design aims to enhance coulombic efficiency and energy density, particularly targeting portable applications such as electric vehicles and E-bikes. Our battery configuration involves electrodes (carbon felt and carbon sponge) separated by a microporous separator for ionic migration. The liquid electrolyte, comprising zinc bromide, zinc chloride, potassium chloride, and 1-ethyl-1-methyl pyrrolidinium bromide, facilitates the electrochemical reaction. The battery's electrochemical process involves the plating of zinc ions at the anode and the formation of a bromine complex at the cathode during charging, with reverse reactions during discharge. The entire proposed static battery configuration is made of recyclable Polytetrafluoroethylene (PTFE) polymer, ensuring environmental sustainability. The anode comprises highly conductive graphene-coated carbon felt, while the cathode employs a graphene-coated high-surface-area carbon fiber sponge. Here, we aim to provide more details on the manufacturing methods for the assembly, emphasizing slurry preparation, electrode modification, and electrolyte concentration to achieve enhanced battery performance. With 96 % coulombic efficiency and stable cyclability, the present technology outperforms the existing commercial zinc-bromine battery. Comparative analyses with conventional zinc-bromine flow batteries highlight the advantages of this static battery, including its compactness, reduced weight, and potential for higher energy density. This research represents a significant step towards developing static zinc-bromine batteries suitable for widespread use in portable applications, surpassing the limitations of current zinc-bromine battery technologies. References: Rana, M., et al., Scientific issues of zinc-bromine flow batteries and mitigation strategies. Exploration. n/a(n/a): p. 20220073. Rajarathnam, G.P. and A.M. Vassallo, The Zinc/Bromine Flow Battery: Materials Challenges and Practical Solutions for Technology Advancement. 2016: Springer. Alghamdi, N.S., et al., Zinc–Bromine Rechargeable Batteries: From Device Configuration, Electrochemistry, Material to Performance Evaluation. Nano-Micro Letters, 2023. 15(1): p. 209.
- Open Access
- 1 January 2024
- Published by Wiley in Aquaculture Research
- Vol. 2024 (1)
Assessing the Seasonal Variability of Water Quality and Heavy Metals Concentration in Sediment, Water, and Fish Muscles of Korotoa River in Bangladesh
The current study reveals the concentration of heavy metals in sediment, water, and three fish species of the Korotoa River in Bangladesh. Two diverse seasons, namely wet (August–September 2021) and dry (January–February 2022) were chosen to compare the seasonal differences of five concerning heavy metals (Cr, Co, Pb, As, and Cd) adjacent to coal mining area using inductively coupled plasma mass spectrometry. Different physicochemical parameters of water quality along with the concentration of heavy metals varied significantly with the seasons. However, the average concentrations of the examined heavy metals followed the downward order of Cr > Pb > As > Co > Cd for both wet and dry seasons. The mean concentration of heavy metals in fish was found higher in Mastacembelus armatus compared with Labeo bata and Amblypharyngodon mola. The values of the researched heavy metals’ enrichment factors were reported in the following order: As > Co > Cr > Cd. The pollution load index (PLI) specified that the sediment of the river under study was not seriously contaminated (PLI <1). However, the content of heavy metals in the water was discovered to be much greater than the standards for safe drinking water limits and the preservation of freshwater aquatic life, demonstrating that the river water from this area is unsafe for use as drinking water or for cooking. However, the study suggests relevant authorities should take necessary action to stop further pollution in the study area.
- 1 January 2024
- Published by Wiley in Aquaculture Research
- Vol. 2024 (1)
Open AccessAssessing the Seasonal Variability of Water Quality and Heavy Metals Concentration in Sediment, Water, and Fish Muscles of Korotoa River in Bangladesh
The current study reveals the concentration of heavy metals in sediment, water, and three fish species of the Korotoa River in Bangladesh. Two diverse seasons, namely wet (August–September 2021) and dry (January–February 2022) were chosen to compare the seasonal differences of five concerning heavy metals (Cr, Co, Pb, As, and Cd) adjacent to coal mining area using inductively coupled plasma mass spectrometry. Different physicochemical parameters of water quality along with the concentration of heavy metals varied significantly with the seasons. However, the average concentrations of the examined heavy metals followed the downward order of Cr > Pb > As > Co > Cd for both wet and dry seasons. The mean concentration of heavy metals in fish was found higher in Mastacembelus armatus compared with Labeo bata and Amblypharyngodon mola. The values of the researched heavy metals’ enrichment factors were reported in the following order: As > Co > Cr > Cd. The pollution load index (PLI) specified that the sediment of the river under study was not seriously contaminated (PLI <1). However, the content of heavy metals in the water was discovered to be much greater than the standards for safe drinking water limits and the preservation of freshwater aquatic life, demonstrating that the river water from this area is unsafe for use as drinking water or for cooking. However, the study suggests relevant authorities should take necessary action to stop further pollution in the study area.
- Open Access
- 28 December 2023
- Published by Wiley in Batteries & Supercaps
- Vol. 7 (3)
Tin Modified Carbon Nanofibers as an Effective Catalytic Electrode for Bromine Redox Reactions in Static Zinc‐bromine Batteries
Zinc‐bromine batteries (ZBBs) have emerged as a compelling solution for large‐scale energy storage, yet they confront significant technical challenges impeding widespread commercialization. The electrochemical processes within ZBBs rely on a stoichiometric mechanism, where the bromine reaction at the cathode drives the zinc plating reaction on the anode. However, the sluggish electrochemical kinetics of Br2/Br− redox reactions lead to substantial electrochemical polarization, resulting in interruptions in zinc plating and significant voltage losses in ZBBs. This study introduces a new solution to address these challenges by leveraging carbon nanofiber decorated with tin nanoparticles as an efficient catalyst. The catalyst serves to enhance the Br2/Br– redox reaction, effectively reducing voltage losses in ZBBs. When implemented in static ZBB configurations, the Sn/CNF catalysts demonstrate exceptional long‐term stability, achieving an impressive 3000 cycles with minimal voltage loss. In contrast, ZBBs utilizing SnO2 based catalysts experience a substantially higher voltage loss of 736 mV, along with limited and unstable cycling performance. These findings signify a promising approach for the development of catalytic electrodes, paving the way for high‐performance ZBBs with improved efficiency and cycling durability.
- 28 December 2023
- Published by Wiley in Batteries & Supercaps
- Vol. 7 (3)
Open AccessTin Modified Carbon Nanofibers as an Effective Catalytic Electrode for Bromine Redox Reactions in Static Zinc‐bromine Batteries
Zinc‐bromine batteries (ZBBs) have emerged as a compelling solution for large‐scale energy storage, yet they confront significant technical challenges impeding widespread commercialization. The electrochemical processes within ZBBs rely on a stoichiometric mechanism, where the bromine reaction at the cathode drives the zinc plating reaction on the anode. However, the sluggish electrochemical kinetics of Br2/Br− redox reactions lead to substantial electrochemical polarization, resulting in interruptions in zinc plating and significant voltage losses in ZBBs. This study introduces a new solution to address these challenges by leveraging carbon nanofiber decorated with tin nanoparticles as an efficient catalyst. The catalyst serves to enhance the Br2/Br– redox reaction, effectively reducing voltage losses in ZBBs. When implemented in static ZBB configurations, the Sn/CNF catalysts demonstrate exceptional long‐term stability, achieving an impressive 3000 cycles with minimal voltage loss. In contrast, ZBBs utilizing SnO2 based catalysts experience a substantially higher voltage loss of 736 mV, along with limited and unstable cycling performance. These findings signify a promising approach for the development of catalytic electrodes, paving the way for high‐performance ZBBs with improved efficiency and cycling durability.
- Open Access
Predicting the Crystal Structure and Lattice Parameters of the Perovskite Materials via Different Machine Learning Models Based on Basic Atom Properties
Perovskite materials have high potential for the renewable energy sources such as solar PV cells, fuel cells, etc. Different structural distortions such as crystal structure and lattice parameters have a critical impact on the determination of the perovskite’s structure strength, stability, and overall performance of the materials in the applications. To improve the perovskite performance and accelerate the prediction of different structural distortions, few ML models have been established to predict the type of crystal structures and their lattice parameters using the basic atom characteristics of the perovskite materials. In this work, different ML models such as random forest (RF), support vector machine (SVM), neural network (NN), and genetic algorithm (GA) supported neural network (GA-NN) have been established, whereas support vector regression (SVR) and genetic algorithm-supported support vector regression (GA-SVR) models have been assessed for the prediction of the lattice parameters. The prediction model accuracy for the crystal structure classification is almost 88% in average for GA-NN whereas for the lattice constants regression model GA-SVR model gives ~95% in average which can be further improved by accumulating more robust datasets into the database. These ML models can be used as an alternative process to accelerate the development of finding out new perovskite material by providing valuable insight for the behaviours of the perovskite materials.
Open AccessPredicting the Crystal Structure and Lattice Parameters of the Perovskite Materials via Different Machine Learning Models Based on Basic Atom Properties
Perovskite materials have high potential for the renewable energy sources such as solar PV cells, fuel cells, etc. Different structural distortions such as crystal structure and lattice parameters have a critical impact on the determination of the perovskite’s structure strength, stability, and overall performance of the materials in the applications. To improve the perovskite performance and accelerate the prediction of different structural distortions, few ML models have been established to predict the type of crystal structures and their lattice parameters using the basic atom characteristics of the perovskite materials. In this work, different ML models such as random forest (RF), support vector machine (SVM), neural network (NN), and genetic algorithm (GA) supported neural network (GA-NN) have been established, whereas support vector regression (SVR) and genetic algorithm-supported support vector regression (GA-SVR) models have been assessed for the prediction of the lattice parameters. The prediction model accuracy for the crystal structure classification is almost 88% in average for GA-NN whereas for the lattice constants regression model GA-SVR model gives ~95% in average which can be further improved by accumulating more robust datasets into the database. These ML models can be used as an alternative process to accelerate the development of finding out new perovskite material by providing valuable insight for the behaviours of the perovskite materials.
- 11 May 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (25) , 11086-11092
ZIF-8 derived hollow carbon to trap polysulfides for high performance lithium–sulfur batteries
Lithium–sulfur batteries (LSBs) have a high theoretical energy density and are low cost. However, the undesirable shuttle effect with the solid discharge product, Li2S, greatly impedes their market penetration. Conductive carbon materials with functional elements are beneficial in controlling the shuttle effect and can reactivate the Li2S, leading to improved long term cycling performance of LSBs. Herein, we report zinc (Zn) and nitrogen (N) co-doped ZIF-8 derived hollow carbon (ZHC) as a promising separator coating for LSBs to control the shuttle effect. The hollow area in the ZHC is identified to be around 250 nm with a carbonized outer surface thickness of approximately 50 nm. The presence of Zn and N in the nanohollow carbon structure helps to mitigate polysulfide (PS) diffusion in LSBs. Furthermore, the hollow interior of the carbon acts as a PS pocket to physically capture the PS and in addition Zn and N chemically attract the PS through polar–polar and metal sulfide interactions. The ZHC with its unique architecture and functional groups shows a promising performance with an initial specific capacity (S.cap) of 842 mA h g−1 at 4.80 mg cm−2 and cycling stability until 400 cycles, which is considerably higher in comparison with the cycling performance of parent ZIF-8.
- 11 May 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (25) , 11086-11092
ZIF-8 derived hollow carbon to trap polysulfides for high performance lithium–sulfur batteries
Lithium–sulfur batteries (LSBs) have a high theoretical energy density and are low cost. However, the undesirable shuttle effect with the solid discharge product, Li2S, greatly impedes their market penetration. Conductive carbon materials with functional elements are beneficial in controlling the shuttle effect and can reactivate the Li2S, leading to improved long term cycling performance of LSBs. Herein, we report zinc (Zn) and nitrogen (N) co-doped ZIF-8 derived hollow carbon (ZHC) as a promising separator coating for LSBs to control the shuttle effect. The hollow area in the ZHC is identified to be around 250 nm with a carbonized outer surface thickness of approximately 50 nm. The presence of Zn and N in the nanohollow carbon structure helps to mitigate polysulfide (PS) diffusion in LSBs. Furthermore, the hollow interior of the carbon acts as a PS pocket to physically capture the PS and in addition Zn and N chemically attract the PS through polar–polar and metal sulfide interactions. The ZHC with its unique architecture and functional groups shows a promising performance with an initial specific capacity (S.cap) of 842 mA h g−1 at 4.80 mg cm−2 and cycling stability until 400 cycles, which is considerably higher in comparison with the cycling performance of parent ZIF-8.
- Open Access
Recent Advancements of N-Doped Graphene for Rechargeable Batteries: A Review
Graphene, a 2D carbon structure, due to its unique materials characteristics for energy storage applications has grasped the considerable attention of scientists. The highlighted properties of this material with a mechanically robust and highly conductive nature have opened new opportunities for different energy storage systems such as Li-S (lithium-sulfur), Li-ion batteries, and metal-air batteries. It is necessary to understand the intrinsic properties of graphene materials to widen its large-scale applications in energy storage systems. In this review, different routes of graphene synthesis were investigated using chemical, thermal, plasma, and other methods along with their advantages and disadvantages. Apart from this, the applications of N-doped graphene in energy storage devices were discussed.
Open AccessRecent Advancements of N-Doped Graphene for Rechargeable Batteries: A Review
Graphene, a 2D carbon structure, due to its unique materials characteristics for energy storage applications has grasped the considerable attention of scientists. The highlighted properties of this material with a mechanically robust and highly conductive nature have opened new opportunities for different energy storage systems such as Li-S (lithium-sulfur), Li-ion batteries, and metal-air batteries. It is necessary to understand the intrinsic properties of graphene materials to widen its large-scale applications in energy storage systems. In this review, different routes of graphene synthesis were investigated using chemical, thermal, plasma, and other methods along with their advantages and disadvantages. Apart from this, the applications of N-doped graphene in energy storage devices were discussed.
- 21 September 2020
- Published by University of Queensland Library
Functional materials to enable durable and high loading lithium-sulfur batteries
- 21 September 2020
- Published by University of Queensland Library
Functional materials to enable durable and high loading lithium-sulfur batteries
- 17 July 2020
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 14 (7) , 8826-8837
Biomimetic Sn4P3 Anchored on Carbon Nanotubes as an Anode for High-Performance Sodium-Ion Batteries
Recently, Sn4P3 has emerged as a promising anode for sodium-ion batteries (SIBs) due to the high specific capacity. However, the use of Sn4P3 has been impeded by capacity fade and an inferior rate performance. Herein, a biomimetic heterostructure is reported by using a simple hydrothermal reaction followed by thermal treatment. This bottlebrush-like structure consists of a stem-like carbon nanotube (CNT) as the electron expressway and mechanical support; fructus-like Sn4P3 nanoparticles as the active material; and the permeable stoma-like thin carbon coating as the buffer layer. Having benefited from the biomimetic structure, a superior electrochemical performance is obtained in the SIBs. It exhibits a high capacity of 742 mA h g–1 after 150 cycles at 0.2C, and superior rate performance with 449 mA h g–1 at 2C after 500 cycles. Moreover, the sodium storage mechanism is confirmed by cyclic voltammetry and ex situ X-ray diffraction and transmission electron microscopy. In situ electrochemical impedance spectroscopy was adopted to analyze the reaction dynamics. This research represents a further step toward figuring out the inferior electrochemical performance of other metal phosphide materials.
- 17 July 2020
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 14 (7) , 8826-8837
Biomimetic Sn4P3 Anchored on Carbon Nanotubes as an Anode for High-Performance Sodium-Ion Batteries
Recently, Sn4P3 has emerged as a promising anode for sodium-ion batteries (SIBs) due to the high specific capacity. However, the use of Sn4P3 has been impeded by capacity fade and an inferior rate performance. Herein, a biomimetic heterostructure is reported by using a simple hydrothermal reaction followed by thermal treatment. This bottlebrush-like structure consists of a stem-like carbon nanotube (CNT) as the electron expressway and mechanical support; fructus-like Sn4P3 nanoparticles as the active material; and the permeable stoma-like thin carbon coating as the buffer layer. Having benefited from the biomimetic structure, a superior electrochemical performance is obtained in the SIBs. It exhibits a high capacity of 742 mA h g–1 after 150 cycles at 0.2C, and superior rate performance with 449 mA h g–1 at 2C after 500 cycles. Moreover, the sodium storage mechanism is confirmed by cyclic voltammetry and ex situ X-ray diffraction and transmission electron microscopy. In situ electrochemical impedance spectroscopy was adopted to analyze the reaction dynamics. This research represents a further step toward figuring out the inferior electrochemical performance of other metal phosphide materials.