Joaquín García-Gómez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Joaquín García-Gómez has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Roberto Gil-Pita
Department of Signal Theory and Communications, University of Alcalá, 28805 Alcalá de Henares, Madrid, Spain
10 shared publications - Manuel Rosa-Zurera
Department of Signal Theory and Communications, University of Alcalá, 28805 Alcalá de Henares, Madrid, Spain
7 shared publications Inma Mohino-Herranz
Univ Alcala, Dept Signal Theory & Commun, Ctra Madrid Barcelona,Km 33,600, Madrid 28805, Spain
4 shared publicationsMarta Bautista-Durán
Department of Signal Theory and Communications, University of Alcalá, Alcalá de Henares 28805 and Spain, --- Select a Country --
4 shared publicationsMiguel Aguilar-Ortega
Univ Alcala, Dept Signal Theory & Commun, Ctra Madrid Barcelona,Km 33,600, Madrid 28805, Spain
4 shared publications- Inma Mohino-Herranz
Natl Inst Aerosp Technol, Madrid, Spain
3 shared publications
Latest Publications
- 24 May 2024
- Published by Elsevier in Expert Systems with Applications
- Vol. 253
Initializing the weights of a multilayer perceptron for activity and emotion recognition
- 24 May 2024
- Published by Elsevier in Expert Systems with Applications
- Vol. 253
Initializing the weights of a multilayer perceptron for activity and emotion recognition
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
What does the European Spatial Data Infrastructure INSPIRE need in order to become a Green Deal Data Space?
In May 2007, the INSPIRE directive established the path towards creating the European Spatial Data Infrastructure (ESDI). While the Joint Research Centre (JRC) defined a set of detailed implementation guidelines, the European member states determined the agencies responsible for delivering the different topics specified in the directive’s annexes. INSPIRE’s goal was - and still is - to organize and share Europe’s data supporting environmental policies and actions. However, the way that INSPIRE was defined limited contributions to the public sector, and limited topics to those specifically listed in its annexes. Technical challenges and a lack of appropriate tools have impeded INSPIRE from implementing its own guidelines, and even after 15 years, the dream of a continuous, consistent description of Europe’s environment has still not completely materialized. We should apply the lessons learnt in INSPIRE when we build the Green Deal Data Space (GDDS). To create the GDDS, we should start with ESDI (the European Spatial Data Infrastructure), but also engage and align with the ongoing preparatory actions for data spaces (e.g., for green deal and agriculture) as well as include actors and networks that have emerged or been organized in the recent years. These include: networks of in situ observations (e.g. the Environmental Research Infrastructures (ENVRI) community); Citizen Science initiatives (such as the biodiversity observations integrated in the Global Biodiversity Information Facility (GBIF), or sensor communities for e.g. air quality); predictive algorithms and machine learning models and simulations based on artificial intelligence (such as the ones deployed in the European Open Science Cloud, International Data Space Association and Gaia-X; services driven both by the scientific community and the private sector); remote sensing derived products developed by the Copernicus Services. Most of these data providers have already embraced the FAIR principles and open data, providing many examples of best practice which can assist newer adopters on the path to open science. In the Horizon Europe project AD4GD (AllData4GreenDeal), we believe that, instead of trying to force data producers to adopt cumbersome new protocols, we should take advantage of the latest developments in geospatial standards and APIs. These allow loosely coupled but well documented and interlinked data sources and models in the GDDS while achieving scientifically robust integration and easy access to data in the resulting workflows. Another fundamental element will be the adoption of a common and extensible information model enabling the representation and exchange of Green Deal related data in an unambiguous manner, including vocabularies for Essential Variables to organize the observable measurements and increase the level of semantic interoperability. This will allow systems and components from different technology providers to seamless interoperate and exchange data, and to have an integrated view and access to exploit the full value of the available data. The project will validate the approach in three pilot cases: water quality and availability of Berlin lakes, biodiversity corridors in the metropolitan area of Barcelona and low cost air quality sensors in Europe. The AD4GD project is funded by the European Union under the Horizon Europe program.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessWhat does the European Spatial Data Infrastructure INSPIRE need in order to become a Green Deal Data Space?
In May 2007, the INSPIRE directive established the path towards creating the European Spatial Data Infrastructure (ESDI). While the Joint Research Centre (JRC) defined a set of detailed implementation guidelines, the European member states determined the agencies responsible for delivering the different topics specified in the directive’s annexes. INSPIRE’s goal was - and still is - to organize and share Europe’s data supporting environmental policies and actions. However, the way that INSPIRE was defined limited contributions to the public sector, and limited topics to those specifically listed in its annexes. Technical challenges and a lack of appropriate tools have impeded INSPIRE from implementing its own guidelines, and even after 15 years, the dream of a continuous, consistent description of Europe’s environment has still not completely materialized. We should apply the lessons learnt in INSPIRE when we build the Green Deal Data Space (GDDS). To create the GDDS, we should start with ESDI (the European Spatial Data Infrastructure), but also engage and align with the ongoing preparatory actions for data spaces (e.g., for green deal and agriculture) as well as include actors and networks that have emerged or been organized in the recent years. These include: networks of in situ observations (e.g. the Environmental Research Infrastructures (ENVRI) community); Citizen Science initiatives (such as the biodiversity observations integrated in the Global Biodiversity Information Facility (GBIF), or sensor communities for e.g. air quality); predictive algorithms and machine learning models and simulations based on artificial intelligence (such as the ones deployed in the European Open Science Cloud, International Data Space Association and Gaia-X; services driven both by the scientific community and the private sector); remote sensing derived products developed by the Copernicus Services. Most of these data providers have already embraced the FAIR principles and open data, providing many examples of best practice which can assist newer adopters on the path to open science. In the Horizon Europe project AD4GD (AllData4GreenDeal), we believe that, instead of trying to force data producers to adopt cumbersome new protocols, we should take advantage of the latest developments in geospatial standards and APIs. These allow loosely coupled but well documented and interlinked data sources and models in the GDDS while achieving scientifically robust integration and easy access to data in the resulting workflows. Another fundamental element will be the adoption of a common and extensible information model enabling the representation and exchange of Green Deal related data in an unambiguous manner, including vocabularies for Essential Variables to organize the observable measurements and increase the level of semantic interoperability. This will allow systems and components from different technology providers to seamless interoperate and exchange data, and to have an integrated view and access to exploit the full value of the available data. The project will validate the approach in three pilot cases: water quality and availability of Berlin lakes, biodiversity corridors in the metropolitan area of Barcelona and low cost air quality sensors in Europe. The AD4GD project is funded by the European Union under the Horizon Europe program.
- Open Access
- 7 June 2022
- Published by MDPI AG in Electronics
- Vol. 11 (12) , 1811
Introducing the ReaLISED Dataset for Sound Event Classification
This paper presents the Real-Life Indoor Sound Event Dataset (ReaLISED), a new database which has been developed to contribute to the scientific advance by providing a large amount of real labeled indoor audio event recordings. They offer the scientific community the possibility of testing Sound Event Classification (SEC) algorithms. The full set is made up of 2479 sound clips of 18 different events, which were recorded following a precise recording process described along the proposal. This, together with a described way of testing the similarity of new audio, makes the dataset scalable and opens up the door to its future growth, if desired by the researchers. The full set presents a good balance in terms of the number of recordings of each type of event, which is a desirable characteristic of any dataset. Conversely, the main limitation of the provided data is that all the audio is recorded in indoor environments, which was the aim behind this development. To test the quality of the dataset, both the intraclass and the interclass similarities were evaluated. The first has been studied through the calculation of the intraclass Pearson correlation coefficient and further discard of redundant audio, while the second one has been evaluated with the creation, training and testing of different classifiers: linear and quadratic discriminants, k-Nearest Neighbors (kNN), Support Vector Machines (SVM), Multilayer Perceptron (MLP), and Deep Neural Networks (DNN). Firstly, experiments were carried out over the entire dataset, and later over three different groups (impulsive sounds, non-impulsive sounds, and appliances) composed of six classes according to the results from the entire dataset. This clustering shows the usefulness of following a two-step classification process.
- 7 June 2022
- Published by MDPI AG in Electronics
- Vol. 11 (12) , 1811
Open AccessIntroducing the ReaLISED Dataset for Sound Event Classification
This paper presents the Real-Life Indoor Sound Event Dataset (ReaLISED), a new database which has been developed to contribute to the scientific advance by providing a large amount of real labeled indoor audio event recordings. They offer the scientific community the possibility of testing Sound Event Classification (SEC) algorithms. The full set is made up of 2479 sound clips of 18 different events, which were recorded following a precise recording process described along the proposal. This, together with a described way of testing the similarity of new audio, makes the dataset scalable and opens up the door to its future growth, if desired by the researchers. The full set presents a good balance in terms of the number of recordings of each type of event, which is a desirable characteristic of any dataset. Conversely, the main limitation of the provided data is that all the audio is recorded in indoor environments, which was the aim behind this development. To test the quality of the dataset, both the intraclass and the interclass similarities were evaluated. The first has been studied through the calculation of the intraclass Pearson correlation coefficient and further discard of redundant audio, while the second one has been evaluated with the creation, training and testing of different classifiers: linear and quadratic discriminants, k-Nearest Neighbors (kNN), Support Vector Machines (SVM), Multilayer Perceptron (MLP), and Deep Neural Networks (DNN). Firstly, experiments were carried out over the entire dataset, and later over three different groups (impulsive sounds, non-impulsive sounds, and appliances) composed of six classes according to the results from the entire dataset. This clustering shows the usefulness of following a two-step classification process.
- Open Access
Robust Multi-Scenario Speech-Based Emotion Recognition System
Every human being experiences emotions daily, e.g., joy, sadness, fear, anger. These might be revealed through speech—words are often accompanied by our emotional states when we talk. Different acoustic emotional databases are freely available for solving the Emotional Speech Recognition (ESR) task. Unfortunately, many of them were generated under non-real-world conditions, i.e., actors played emotions, and recorded emotions were under fictitious circumstances where noise is non-existent. Another weakness in the design of emotion recognition systems is the scarcity of enough patterns in the available databases, causing generalization problems and leading to overfitting. This paper examines how different recording environmental elements impact system performance using a simple logistic regression algorithm. Specifically, we conducted experiments simulating different scenarios, using different levels of Gaussian white noise, real-world noise, and reverberation. The results from this research show a performance deterioration in all scenarios, increasing the error probability from 25.57% to 79.13% in the worst case. Additionally, a virtual enlargement method and a robust multi-scenario speech-based emotion recognition system are proposed. Our system’s average error probability of 34.57% is comparable to the best-case scenario with 31.55%. The findings support the prediction that simulated emotional speech databases do not offer sufficient closeness to real scenarios.
Open AccessRobust Multi-Scenario Speech-Based Emotion Recognition System
Every human being experiences emotions daily, e.g., joy, sadness, fear, anger. These might be revealed through speech—words are often accompanied by our emotional states when we talk. Different acoustic emotional databases are freely available for solving the Emotional Speech Recognition (ESR) task. Unfortunately, many of them were generated under non-real-world conditions, i.e., actors played emotions, and recorded emotions were under fictitious circumstances where noise is non-existent. Another weakness in the design of emotion recognition systems is the scarcity of enough patterns in the available databases, causing generalization problems and leading to overfitting. This paper examines how different recording environmental elements impact system performance using a simple logistic regression algorithm. Specifically, we conducted experiments simulating different scenarios, using different levels of Gaussian white noise, real-world noise, and reverberation. The results from this research show a performance deterioration in all scenarios, increasing the error probability from 25.57% to 79.13% in the worst case. Additionally, a virtual enlargement method and a robust multi-scenario speech-based emotion recognition system are proposed. Our system’s average error probability of 34.57% is comparable to the best-case scenario with 31.55%. The findings support the prediction that simulated emotional speech databases do not offer sufficient closeness to real scenarios.
- Open Access
- 1 April 2021
- Published by Elsevier in Applied Acoustics
- Vol. 175
Linear detector and neural networks in cascade for voice activity detection in hearing aids
- 1 April 2021
- Published by Elsevier in Applied Acoustics
- Vol. 175
Open AccessLinear detector and neural networks in cascade for voice activity detection in hearing aids
- Open Access
A Wrapper Feature Selection Algorithm: An Emotional Assessment Using Physiological Recordings from Wearable Sensors
Assessing emotional state is an emerging application field boosting research activities on the topic of analysis of non-invasive biosignals to find effective markers to accurately determine the emotional state in real-time. Nowadays using wearable sensors, electrocardiogram and thoracic impedance measurements can be recorded, facilitating analyzing cardiac and respiratory functions directly and autonomic nervous system function indirectly. Such analysis allows distinguishing between different emotional states: neutral, sadness, and disgust. This work was specifically focused on the proposal of a k-fold approach for selecting features while training the classifier that reduces the loss of generalization. The performance of the proposed algorithm used as the selection criterion was compared to the commonly used standard error function. The proposed k-fold approach outperforms the conventional method with 4% hit success rate improvement, reaching an accuracy near to 78%. Moreover, the proposed selection criterion method allows the classifier to produce the best performance using a lower number of features at lower computational cost. A reduced number of features reduces the risk of overfitting while a lower computational cost contributes to implementing real-time systems using wearable electronics.
Open AccessA Wrapper Feature Selection Algorithm: An Emotional Assessment Using Physiological Recordings from Wearable Sensors
Assessing emotional state is an emerging application field boosting research activities on the topic of analysis of non-invasive biosignals to find effective markers to accurately determine the emotional state in real-time. Nowadays using wearable sensors, electrocardiogram and thoracic impedance measurements can be recorded, facilitating analyzing cardiac and respiratory functions directly and autonomic nervous system function indirectly. Such analysis allows distinguishing between different emotional states: neutral, sadness, and disgust. This work was specifically focused on the proposal of a k-fold approach for selecting features while training the classifier that reduces the loss of generalization. The performance of the proposed algorithm used as the selection criterion was compared to the commonly used standard error function. The proposed k-fold approach outperforms the conventional method with 4% hit success rate improvement, reaching an accuracy near to 78%. Moreover, the proposed selection criterion method allows the classifier to produce the best performance using a lower number of features at lower computational cost. A reduced number of features reduces the risk of overfitting while a lower computational cost contributes to implementing real-time systems using wearable electronics.
- 30 September 2019
- Published by The American Society for Nondestructive Testing, Inc.
- p. 69-77
Ultrasonic Thickness Estimation using Multimodal Guided Lamb Waves Generated by EMAT
- 30 September 2019
- Published by The American Society for Nondestructive Testing, Inc.
- p. 69-77
Ultrasonic Thickness Estimation using Multimodal Guided Lamb Waves Generated by EMAT
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 261-266
Multi-microphone acoustic events detection and classification for indoor monitoring
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 261-266
Multi-microphone acoustic events detection and classification for indoor monitoring
- Open Access
- 1 January 2019
- Published by INSTICC
- p. 766-772
Cost-constrained Drone Presence Detection through Smart Sound Processing
- 1 January 2019
- Published by INSTICC
- p. 766-772
Open AccessCost-constrained Drone Presence Detection through Smart Sound Processing
- Open Access
Smart Sound Processing for Defect Sizing in Pipelines Using EMAT Actuator Based Multi-Frequency Lamb Waves
Pipeline inspection is a topic of particular interest to the companies. Especially important is the defect sizing, which allows them to avoid subsequent costly repairs in their equipment. A solution for this issue is using ultrasonic waves sensed through Electro-Magnetic Acoustic Transducer (EMAT) actuators. The main advantage of this technology is the absence of the need to have direct contact with the surface of the material under investigation, which must be a conductive one. Specifically interesting is the meander-line-coil based Lamb wave generation, since the directivity of the waves allows a study based in the circumferential wrap-around received signal. However, the variety of defect sizes changes the behavior of the signal when it passes through the pipeline. Because of that, it is necessary to apply advanced techniques based on Smart Sound Processing (SSP). These methods involve extracting useful information from the signals sensed with EMAT at different frequencies to obtain nonlinear estimations of the depth of the defect, and to select the features that better estimate the profile of the pipeline. The proposed technique has been tested using both simulated and real signals in steel pipelines, obtaining good results in terms of Root Mean Square Error (RMSE).
Open AccessSmart Sound Processing for Defect Sizing in Pipelines Using EMAT Actuator Based Multi-Frequency Lamb Waves
Pipeline inspection is a topic of particular interest to the companies. Especially important is the defect sizing, which allows them to avoid subsequent costly repairs in their equipment. A solution for this issue is using ultrasonic waves sensed through Electro-Magnetic Acoustic Transducer (EMAT) actuators. The main advantage of this technology is the absence of the need to have direct contact with the surface of the material under investigation, which must be a conductive one. Specifically interesting is the meander-line-coil based Lamb wave generation, since the directivity of the waves allows a study based in the circumferential wrap-around received signal. However, the variety of defect sizes changes the behavior of the signal when it passes through the pipeline. Because of that, it is necessary to apply advanced techniques based on Smart Sound Processing (SSP). These methods involve extracting useful information from the signals sensed with EMAT at different frequencies to obtain nonlinear estimations of the depth of the defect, and to select the features that better estimate the profile of the pipeline. The proposed technique has been tested using both simulated and real signals in steel pipelines, obtaining good results in terms of Root Mean Square Error (RMSE).