SCSieglinde Callewaert

Sieglinde Callewaert

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sieglinde Callewaert has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    WRF-Chem simulations of CO 2 over Belgium and surrounding countries assessed by ground-based measurements

    by Jiaxin Wang, Sieglinde Callewaert, Minqiang Zhou, Filip Desmet, Sã©Bastien Conil, Michel Ramonet, Pucai Wang, Martine De Maziã¨rE

    The Weather Research and Forecasting model coupled with Chemistry (WRF-Chem), in its passive tracer option (WRF-GHG), was used to simulate CO2 concentrations over Western Europe during summer 2018. The model performance was evaluated against ground-based observations. Due to the large variety of anthropogenic emissions, we conducted five sensitivity tests using a combination of three different inventories (CAMS-REG-ANT, EDGAR, and TNO) and source-specific vertical emission profiles. Compared with observations from five Integrated Carbon Observation System (ICOS) atmospheric stations, the model captures diurnal CO2 variations at different heights. At the ICOS site in Karlsruhe, Germany, simulated near-surface CO2 mole fractions are highly sensitive to the choice of inventory, with discrepancies up to 14.99 ± 31.98 ppm, due to large nearby emission sources. Furthermore, incorporating source-specific vertical profiles notably improves accuracy, increasing the correlation coefficient from 0.53 to 0.78 when using EDGAR. The column-averaged dry-air mole fractions of CO2 (XCO2) from the Total Column Carbon Observing Network (TCCON) are well simulated by WRF-GHG. However, an overestimation of approximately 1.2 ppm was found at the Paris site, likely due to uncertainties in background fields and anthropogenic emissions. In addition, a negative bias was found in early June at most ICOS and TCCON sites, may be attributed to errors in simulated fluxes during the growing season. However, due to the lack of co-located flux observations, the exact cause remains uncertain. Overall, this study demonstrates the capability of WRF-GHG in simulating CO2 over Belgium and surrounding countries and provides insights into the regional-scale characteristics of atmospheric CO2.

  • Open Access

    A WRF-Chem study of the greenhouse gas column and in situ surface mole fractions observed at Xianghe, China – Part 2: Sensitivity of carbon dioxide (CO 2 ) simulations to critical model parameters

    by Sieglinde Callewaert, Minqiang Zhou, Bavo Langerock, Pucai Wang, Ting Wang, Emmanuel Mahieu, Martine De Mazière

    Understanding the variability and sources of atmospheric CO2 is essential for improving greenhouse gas monitoring and model performance. This study investigates temporal CO2 variability at the Xianghe site in China, which hosts both remote sensed (TCCON-affiliated) and in situ (PICARRO) observations. Using the Weather Research and Forecast model coupled with Chemistry, in its greenhouse gas option (WRF-GHG), we performed a one-year simulation of surface and column-averaged CO2 mole fractions, evaluated model performance and conducted sensitivity experiments to assess the influence of key model configuration choices. The model captured the temporal variability of column-averaged mole fraction of CO2 (XCO2) reasonably well (r=0.7), although a persistent bias in background values was found. A July 2019 heatwave case study further demonstrated the model’s ability to reproduce a synoptically driven anomaly. Near the surface, performance was good during afternoon hours (r=0.75, MBE =2.44 ppm), nighttime mole fractions were overestimated (MBE = 7.86 ppm), resulting in an exaggerated diurnal amplitude. Sensitivity tests revealed that land cover data, vertical emission profiles, and adjusted VPRM-parameters (Vegetation Photosynthesis and Respiration Model) can significantly influence modeled mole fractions, particularly at night. Tracer analysis identified industry and energy as dominant sources, while biospheric fluxes introduced seasonal variability – acting as a moderate sink in summer for XCO2 and a net source in most months near the surface. These findings demonstrate the utility of WRF-GHG for interpreting temporal patterns and sectoral contributions to CO2 variability at Xianghe, while emphasizing the importance of careful model configuration to ensure reliable simulations.

  • Open Access

    Reply on RC1

    by Jiaxin Wang, Sieglinde Callewaert, Minqiang Zhou, Filip Desmet, Sébastien Conil, Michel Ramonet, Pucai Wang, Martine De Mazière

    The Weather Research and Forecasting model coupled with Chemistry (WRF-Chem), in its passive tracer option (WRF-GHG), was used to simulate CO2 concentrations over Western Europe during summer 2018. The model performance was evaluated against ground-based observations. Due to the large variety of anthropogenic emissions, we conducted five sensitivity tests using a combination of three different inventories (CAMS-REG-ANT, EDGAR, and TNO) and source-specific vertical emission profiles. Compared with observations from five Integrated Carbon Observation System (ICOS) atmospheric stations, the model captures diurnal CO2 variations at different heights. At the ICOS site in Karlsruhe, Germany, simulated near-surface CO2 mole fractions are highly sensitive to the choice of anthropogenic emission inventory, with discrepancies up to 14.99±31.98 ppm, due to large nearby emission sources. Furthermore, incorporating source-specific vertical profiles notably improves accuracy, increasing the correlation coefficient from 0.53 to 0.78 when using EDGAR. The column-averaged dry-air mole fractions of CO2 (XCO2) from the Total Column Carbon Observing Network (TCCON) are well simulated by WRF-GHG. However, an overestimation of approximately 1.2 ppm was found at the Paris site, likely due to uncertainties in anthropogenic emissions and boundary conditions. In addition, a negative bias was found in early June at most ICOS and TCCON sites, may be attributed to errors in simulated fluxes during the growing season. However, due to the lack of co-located flux observations, the exact cause remains uncertain. Overall, this study demonstrates the capability of WRF-GHG in simulating CO2 over Western Europe, while showing the need for improving model configuration.

  • Open Access

    Reply on RC2

    by Jiaxin Wang, Sieglinde Callewaert, Minqiang Zhou, Filip Desmet, Sébastien Conil, Michel Ramonet, Pucai Wang, Martine De Mazière

    The Weather Research and Forecasting model coupled with Chemistry (WRF-Chem), in its passive tracer option (WRF-GHG), was used to simulate CO2 concentrations over Western Europe during summer 2018. The model performance was evaluated against ground-based observations. Due to the large variety of anthropogenic emissions, we conducted five sensitivity tests using a combination of three different inventories (CAMS-REG-ANT, EDGAR, and TNO) and source-specific vertical emission profiles. Compared with observations from five Integrated Carbon Observation System (ICOS) atmospheric stations, the model captures diurnal CO2 variations at different heights. At the ICOS site in Karlsruhe, Germany, simulated near-surface CO2 mole fractions are highly sensitive to the choice of anthropogenic emission inventory, with discrepancies up to 14.99±31.98 ppm, due to large nearby emission sources. Furthermore, incorporating source-specific vertical profiles notably improves accuracy, increasing the correlation coefficient from 0.53 to 0.78 when using EDGAR. The column-averaged dry-air mole fractions of CO2 (XCO2) from the Total Column Carbon Observing Network (TCCON) are well simulated by WRF-GHG. However, an overestimation of approximately 1.2 ppm was found at the Paris site, likely due to uncertainties in anthropogenic emissions and boundary conditions. In addition, a negative bias was found in early June at most ICOS and TCCON sites, may be attributed to errors in simulated fluxes during the growing season. However, due to the lack of co-located flux observations, the exact cause remains uncertain. Overall, this study demonstrates the capability of WRF-GHG in simulating CO2 over Western Europe, while showing the need for improving model configuration.

  • Open Access

    Author comments

    by Sieglinde Callewaert, Minqiang Zhou, Bavo Langerock, Pucai Wang, Ting Wang, Emmanuel Mahieu, Martine De Mazière

    Understanding the variability and sources of atmospheric CO2 is essential for improving greenhouse gas monitoring and model performance. This study investigates temporal CO2 variability at the Xianghe site in China, which hosts both remote sensed (TCCON-affiliated) and in situ (PICARRO) observations. Using the Weather Research and Forecast model coupled with Chemistry, in its greenhouse gas option (WRF-GHG), we performed a one-year simulation of surface and column-averaged CO2 mole fractions, evaluated model performance and conducted sensitivity experiments to assess the influence of key model configuration choices. The model captured the temporal variability of column-averaged mole fraction of CO2 (XCO2) reasonably well (r=0.7), although a persistent bias in background values was found. A July 2019 heatwave case study further demonstrated the model’s ability to reproduce a synoptically driven anomaly. Near the surface, performance was good during afternoon hours (r=0.75, MBE=–1.65 ppm), nighttime mole fractions were overestimated (MBE = 6.51 ppm), resulting in an exaggerated diurnal amplitude. Sensitivity tests revealed that land cover data, vertical emission profiles, and adjusted VPRM-parameters (Vegetation Photosynthesis and Respiration Model) can significantly influence modeled mole fractions, particularly at night. Tracer analysis identified industry and energy as dominant sources, while biospheric fluxes introduced seasonal variability – acting as a moderate sink in summer for XCO2 and a net source in most months near the surface. These findings demonstrate the utility of WRF-GHG for interpreting temporal patterns and sectoral contributions to CO2 variability at Xianghe, while emphasizing the importance of careful model configuration to ensure reliable simulations.

  • Open Access

    Author comments

    by Sieglinde Callewaert, Minqiang Zhou, Bavo Langerock, Pucai Wang, Ting Wang, Emmanuel Mahieu, Martine De Mazière

    Understanding the variability and sources of atmospheric CO2 is essential for improving greenhouse gas monitoring and model performance. This study investigates temporal CO2 variability at the Xianghe site in China, which hosts both remote sensed (TCCON-affiliated) and in situ (PICARRO) observations. Using the Weather Research and Forecast model coupled with Chemistry, in its greenhouse gas option (WRF-GHG), we performed a one-year simulation of surface and column-averaged CO2 mole fractions, evaluated model performance and conducted sensitivity experiments to assess the influence of key model configuration choices. The model captured the temporal variability of column-averaged mole fraction of CO2 (XCO2) reasonably well (r=0.7), although a persistent bias in background values was found. A July 2019 heatwave case study further demonstrated the model’s ability to reproduce a synoptically driven anomaly. Near the surface, performance was good during afternoon hours (r=0.75, MBE=–1.65 ppm), nighttime mole fractions were overestimated (MBE = 6.51 ppm), resulting in an exaggerated diurnal amplitude. Sensitivity tests revealed that land cover data, vertical emission profiles, and adjusted VPRM-parameters (Vegetation Photosynthesis and Respiration Model) can significantly influence modeled mole fractions, particularly at night. Tracer analysis identified industry and energy as dominant sources, while biospheric fluxes introduced seasonal variability – acting as a moderate sink in summer for XCO2 and a net source in most months near the surface. These findings demonstrate the utility of WRF-GHG for interpreting temporal patterns and sectoral contributions to CO2 variability at Xianghe, while emphasizing the importance of careful model configuration to ensure reliable simulations.

  • Open Access

    Comment on egusphere-2025-4537

    by Jiaxin Wang, Sieglinde Callewaert, Minqiang Zhou, Filip Desmet, Sébastien Conil, Michel Ramonet, Pucai Wang, Martine De Mazière

    The Weather Research and Forecasting model coupled with Chemistry (WRF-Chem), in its passive tracer option (WRF-GHG), was used to simulate CO2 concentrations over Western Europe during summer 2018. The model performance was evaluated against ground-based observations. Due to the large variety of anthropogenic emissions, we conducted five sensitivity tests using a combination of three different inventories (CAMS-REG-ANT, EDGAR, and TNO) and source-specific vertical emission profiles. Compared with observations from five Integrated Carbon Observation System (ICOS) atmospheric stations, the model captures diurnal CO2 variations at different heights. At the ICOS site in Karlsruhe, Germany, simulated near-surface CO2 mole fractions are highly sensitive to the choice of anthropogenic emission inventory, with discrepancies up to 14.99±31.98 ppm, due to large nearby emission sources. Furthermore, incorporating source-specific vertical profiles notably improves accuracy, increasing the correlation coefficient from 0.53 to 0.78 when using EDGAR. The column-averaged dry-air mole fractions of CO2 (XCO2) from the Total Column Carbon Observing Network (TCCON) are well simulated by WRF-GHG. However, an overestimation of approximately 1.2 ppm was found at the Paris site, likely due to uncertainties in anthropogenic emissions and boundary conditions. In addition, a negative bias was found in early June at most ICOS and TCCON sites, may be attributed to errors in simulated fluxes during the growing season. However, due to the lack of co-located flux observations, the exact cause remains uncertain. Overall, this study demonstrates the capability of WRF-GHG in simulating CO2 over Western Europe, while showing the need for improving model configuration.

  • Open Access

    Comment on egusphere-2025-4537

    by Jiaxin Wang, Sieglinde Callewaert, Minqiang Zhou, Filip Desmet, Sébastien Conil, Michel Ramonet, Pucai Wang, Martine De Mazière

    The Weather Research and Forecasting model coupled with Chemistry (WRF-Chem), in its passive tracer option (WRF-GHG), was used to simulate CO2 concentrations over Western Europe during summer 2018. The model performance was evaluated against ground-based observations. Due to the large variety of anthropogenic emissions, we conducted five sensitivity tests using a combination of three different inventories (CAMS-REG-ANT, EDGAR, and TNO) and source-specific vertical emission profiles. Compared with observations from five Integrated Carbon Observation System (ICOS) atmospheric stations, the model captures diurnal CO2 variations at different heights. At the ICOS site in Karlsruhe, Germany, simulated near-surface CO2 mole fractions are highly sensitive to the choice of anthropogenic emission inventory, with discrepancies up to 14.99±31.98 ppm, due to large nearby emission sources. Furthermore, incorporating source-specific vertical profiles notably improves accuracy, increasing the correlation coefficient from 0.53 to 0.78 when using EDGAR. The column-averaged dry-air mole fractions of CO2 (XCO2) from the Total Column Carbon Observing Network (TCCON) are well simulated by WRF-GHG. However, an overestimation of approximately 1.2 ppm was found at the Paris site, likely due to uncertainties in anthropogenic emissions and boundary conditions. In addition, a negative bias was found in early June at most ICOS and TCCON sites, may be attributed to errors in simulated fluxes during the growing season. However, due to the lack of co-located flux observations, the exact cause remains uncertain. Overall, this study demonstrates the capability of WRF-GHG in simulating CO2 over Western Europe, while showing the need for improving model configuration.

  • Open Access

    Comment on egusphere-2025-3959

    by Sieglinde Callewaert, Minqiang Zhou, Bavo Langerock, Pucai Wang, Ting Wang, Emmanuel Mahieu, Martine De Mazière

    Understanding the variability and sources of atmospheric CO2 is essential for improving greenhouse gas monitoring and model performance. This study investigates temporal CO2 variability at the Xianghe site in China, which hosts both remote sensed (TCCON-affiliated) and in situ (PICARRO) observations. Using the Weather Research and Forecast model coupled with Chemistry, in its greenhouse gas option (WRF-GHG), we performed a one-year simulation of surface and column-averaged CO2 mole fractions, evaluated model performance and conducted sensitivity experiments to assess the influence of key model configuration choices. The model captured the temporal variability of column-averaged mole fraction of CO2 (XCO2) reasonably well (r=0.7), although a persistent bias in background values was found. A July 2019 heatwave case study further demonstrated the model’s ability to reproduce a synoptically driven anomaly. Near the surface, performance was good during afternoon hours (r=0.75, MBE=–1.65 ppm), nighttime mole fractions were overestimated (MBE = 6.51 ppm), resulting in an exaggerated diurnal amplitude. Sensitivity tests revealed that land cover data, vertical emission profiles, and adjusted VPRM-parameters (Vegetation Photosynthesis and Respiration Model) can significantly influence modeled mole fractions, particularly at night. Tracer analysis identified industry and energy as dominant sources, while biospheric fluxes introduced seasonal variability – acting as a moderate sink in summer for XCO2 and a net source in most months near the surface. These findings demonstrate the utility of WRF-GHG for interpreting temporal patterns and sectoral contributions to CO2 variability at Xianghe, while emphasizing the importance of careful model configuration to ensure reliable simulations.

  • Open Access

    WRF-Chem simulations of CO 2 over Western Europe assessed by ground-based measurements

    by Jiaxin Wang, Sieglinde Callewaert, Minqiang Zhou, Filip Desmet, Sã©Bastien Conil, Michel Ramonet, Pucai Wang, Martine De Maziã¨rE

    The Weather Research and Forecasting model coupled with Chemistry (WRF-Chem), in its passive tracer option (WRF-GHG), was used to simulate CO2 concentrations over Western Europe during summer 2018. The model performance was evaluated against ground-based observations. Due to the large variety of anthropogenic emissions, we conducted five sensitivity tests using a combination of three different inventories (CAMS-REG-ANT, EDGAR, and TNO) and source-specific vertical emission profiles. Compared with observations from five Integrated Carbon Observation System (ICOS) atmospheric stations, the model captures diurnal CO2 variations at different heights. At the ICOS site in Karlsruhe, Germany, simulated near-surface CO2 mole fractions are highly sensitive to the choice of anthropogenic emission inventory, with discrepancies up to 14.99±31.98 ppm, due to large nearby emission sources. Furthermore, incorporating source-specific vertical profiles notably improves accuracy, increasing the correlation coefficient from 0.53 to 0.78 when using EDGAR. The column-averaged dry-air mole fractions of CO2 (XCO2) from the Total Column Carbon Observing Network (TCCON) are well simulated by WRF-GHG. However, an overestimation of approximately 1.2 ppm was found at the Paris site, likely due to uncertainties in anthropogenic emissions and boundary conditions. In addition, a negative bias was found in early June at most ICOS and TCCON sites, may be attributed to errors in simulated fluxes during the growing season. However, due to the lack of co-located flux observations, the exact cause remains uncertain. Overall, this study demonstrates the capability of WRF-GHG in simulating CO2 over Western Europe, while showing the need for improving model configuration.